diff options
Diffstat (limited to 'arch/arm/cpu/arm926ejs/mxs/spl_boot.c')
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 134 |
1 files changed, 134 insertions, 0 deletions
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c new file mode 100644 index 0000000000..ddafddbf2b --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -0,0 +1,134 @@ +/* + * Freescale i.MX28 Boot setup + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> + +#include "mxs_init.h" + +/* + * This delay function is intended to be used only in early stage of boot, where + * clock are not set up yet. The timer used here is reset on every boot and + * takes a few seconds to roll. The boot doesn't take that long, so to keep the + * code simple, it doesn't take rolling into consideration. + */ +#define HW_DIGCTRL_MICROSECONDS 0x8001c0c0 +void early_delay(int delay) +{ + uint32_t st = readl(HW_DIGCTRL_MICROSECONDS); + st += delay; + while (st > readl(HW_DIGCTRL_MICROSECONDS)) + ; +} + +#define MUX_CONFIG_BOOTMODE_PAD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) +const iomux_cfg_t iomux_boot[] = { + MX28_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD, + MX28_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD, + MX28_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD, + MX28_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD, + MX28_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD, + MX28_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, +}; + +uint8_t mxs_get_bootmode_index(void) +{ + uint8_t bootmode = 0; + int i; + uint8_t masked; + + /* Setup IOMUX of bootmode pads to GPIO */ + mxs_iomux_setup_multiple_pads(iomux_boot, ARRAY_SIZE(iomux_boot)); + + /* Setup bootmode pins as GPIO input */ + gpio_direction_input(MX28_PAD_LCD_D00__GPIO_1_0); + gpio_direction_input(MX28_PAD_LCD_D01__GPIO_1_1); + gpio_direction_input(MX28_PAD_LCD_D02__GPIO_1_2); + gpio_direction_input(MX28_PAD_LCD_D03__GPIO_1_3); + gpio_direction_input(MX28_PAD_LCD_D04__GPIO_1_4); + gpio_direction_input(MX28_PAD_LCD_D05__GPIO_1_5); + + /* Read bootmode pads */ + bootmode |= (gpio_get_value(MX28_PAD_LCD_D00__GPIO_1_0) ? 1 : 0) << 0; + bootmode |= (gpio_get_value(MX28_PAD_LCD_D01__GPIO_1_1) ? 1 : 0) << 1; + bootmode |= (gpio_get_value(MX28_PAD_LCD_D02__GPIO_1_2) ? 1 : 0) << 2; + bootmode |= (gpio_get_value(MX28_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3; + bootmode |= (gpio_get_value(MX28_PAD_LCD_D04__GPIO_1_4) ? 1 : 0) << 4; + bootmode |= (gpio_get_value(MX28_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5; + + for (i = 0; i < ARRAY_SIZE(mxs_boot_modes); i++) { + masked = bootmode & mxs_boot_modes[i].boot_mask; + if (masked == mxs_boot_modes[i].boot_pads) + break; + } + + return i; +} + +void mxs_common_spl_init(const iomux_cfg_t *iomux_setup, + const unsigned int iomux_size) +{ + struct mxs_spl_data *data = (struct mxs_spl_data *) + ((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf); + uint8_t bootmode = mxs_get_bootmode_index(); + + mxs_iomux_setup_multiple_pads(iomux_setup, iomux_size); + mxs_power_init(); + + mxs_mem_init(); + data->mem_dram_size = mxs_mem_get_size(); + + data->boot_mode_idx = bootmode; + + mxs_power_wait_pswitch(); +} + +/* Support aparatus */ +inline void board_init_f(unsigned long bootflag) +{ + for (;;) + ; +} + +inline void board_init_r(gd_t *id, ulong dest_addr) +{ + for (;;) + ; +} + +#ifndef CONFIG_SPL_SERIAL_SUPPORT +void serial_putc(const char c) {} +void serial_puts(const char *s) {} +#endif +void hang(void) __attribute__ ((noreturn)); +void hang(void) +{ + for (;;) + ; +} |