diff options
Diffstat (limited to 'arch/arm/cpu/armv7/mx6/soc.c')
| -rw-r--r-- | arch/arm/cpu/armv7/mx6/soc.c | 198 |
1 files changed, 1 insertions, 197 deletions
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 8ad8da8465..282302b1fc 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -8,9 +8,6 @@ */ #include <common.h> -#include <asm/armv7.h> -#include <asm/bootm.h> -#include <asm/pl310.h> #include <asm/errno.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> @@ -38,7 +35,7 @@ struct scu_regs { u32 fpga_rev; }; -#if defined(CONFIG_IMX6_THERMAL) +#if defined(CONFIG_IMX_THERMAL) static const struct imx_thermal_plat imx6_thermal_plat = { .regs = (void *)ANATOP_BASE_ADDR, .fuse_bank = 1, @@ -186,65 +183,6 @@ u32 __weak get_board_rev(void) } #endif -void init_aips(void) -{ - struct aipstz_regs *aips1, *aips2; -#ifdef CONFIG_MX6SX - struct aipstz_regs *aips3; -#endif - - aips1 = (struct aipstz_regs *)AIPS1_BASE_ADDR; - aips2 = (struct aipstz_regs *)AIPS2_BASE_ADDR; -#ifdef CONFIG_MX6SX - aips3 = (struct aipstz_regs *)AIPS3_CONFIG_BASE_ADDR; -#endif - - /* - * Set all MPROTx to be non-bufferable, trusted for R/W, - * not forced to user-mode. - */ - writel(0x77777777, &aips1->mprot0); - writel(0x77777777, &aips1->mprot1); - writel(0x77777777, &aips2->mprot0); - writel(0x77777777, &aips2->mprot1); - - /* - * Set all OPACRx to be non-bufferable, not require - * supervisor privilege level for access,allow for - * write access and untrusted master access. - */ - writel(0x00000000, &aips1->opacr0); - writel(0x00000000, &aips1->opacr1); - writel(0x00000000, &aips1->opacr2); - writel(0x00000000, &aips1->opacr3); - writel(0x00000000, &aips1->opacr4); - writel(0x00000000, &aips2->opacr0); - writel(0x00000000, &aips2->opacr1); - writel(0x00000000, &aips2->opacr2); - writel(0x00000000, &aips2->opacr3); - writel(0x00000000, &aips2->opacr4); - -#ifdef CONFIG_MX6SX - /* - * Set all MPROTx to be non-bufferable, trusted for R/W, - * not forced to user-mode. - */ - writel(0x77777777, &aips3->mprot0); - writel(0x77777777, &aips3->mprot1); - - /* - * Set all OPACRx to be non-bufferable, not require - * supervisor privilege level for access,allow for - * write access and untrusted master access. - */ - writel(0x00000000, &aips3->opacr0); - writel(0x00000000, &aips3->opacr1); - writel(0x00000000, &aips3->opacr2); - writel(0x00000000, &aips3->opacr3); - writel(0x00000000, &aips3->opacr4); -#endif -} - static void clear_ldo_ramp(void) { struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; @@ -312,20 +250,6 @@ static int set_ldo_voltage(enum ldo_reg ldo, u32 mv) return 0; } -static void imx_set_wdog_powerdown(bool enable) -{ - struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR; - struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR; - struct wdog_regs *wdog3 = (struct wdog_regs *)WDOG3_BASE_ADDR; - - if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) - writew(enable, &wdog3->wmcr); - - /* Write to the PDE (Power Down Enable) bit */ - writew(enable, &wdog1->wmcr); - writew(enable, &wdog2->wmcr); -} - static void set_ahb_rate(u32 val) { struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; @@ -378,22 +302,6 @@ static void set_preclk_from_osc(void) } #endif -#define SRC_SCR_WARM_RESET_ENABLE 0 - -static void init_src(void) -{ - struct src *src_regs = (struct src *)SRC_BASE_ADDR; - u32 val; - - /* - * force warm reset sources to generate cold reset - * for a more reliable restart - */ - val = readl(&src_regs->scr); - val &= ~(1 << SRC_SCR_WARM_RESET_ENABLE); - writel(val, &src_regs->scr); -} - int arch_cpu_init(void) { init_aips(); @@ -440,31 +348,6 @@ int board_postclk_init(void) return 0; } -#ifndef CONFIG_SYS_DCACHE_OFF -void enable_caches(void) -{ -#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH) - enum dcache_option option = DCACHE_WRITETHROUGH; -#else - enum dcache_option option = DCACHE_WRITEBACK; -#endif - - /* Avoid random hang when download by usb */ - invalidate_dcache_all(); - - /* Enable D-cache. I-cache is already enabled in start.S */ - dcache_enable(); - - /* Enable caching on OCRAM and ROM */ - mmu_set_region_dcache_behaviour(ROMCP_ARB_BASE_ADDR, - ROMCP_ARB_END_ADDR, - option); - mmu_set_region_dcache_behaviour(IRAM_BASE_ADDR, - IRAM_SIZE, - option); -} -#endif - #if defined(CONFIG_FEC_MXC) void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) { @@ -486,18 +369,6 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) } #endif -void boot_mode_apply(unsigned cfg_val) -{ - unsigned reg; - struct src *psrc = (struct src *)SRC_BASE_ADDR; - writel(cfg_val, &psrc->gpr9); - reg = readl(&psrc->gpr10); - if (cfg_val) - reg |= 1 << 28; - else - reg &= ~(1 << 28); - writel(reg, &psrc->gpr10); -} /* * cfg_val will be used for * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0] @@ -605,70 +476,3 @@ void imx_setup_hdmi(void) writel(reg, &mxc_ccm->chsccdr); } #endif - -#ifndef CONFIG_SYS_L2CACHE_OFF -#define IOMUXC_GPR11_L2CACHE_AS_OCRAM 0x00000002 -void v7_outer_cache_enable(void) -{ - struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE; - unsigned int val; - - - /* - * Set bit 22 in the auxiliary control register. If this bit - * is cleared, PL310 treats Normal Shared Non-cacheable - * accesses as Cacheable no-allocate. - */ - setbits_le32(&pl310->pl310_aux_ctrl, L310_SHARED_ATT_OVERRIDE_ENABLE); - -#if defined CONFIG_MX6SL - struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; - val = readl(&iomux->gpr[11]); - if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) { - /* L2 cache configured as OCRAM, reset it */ - val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM; - writel(val, &iomux->gpr[11]); - } -#endif - - /* Must disable the L2 before changing the latency parameters */ - clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN); - - writel(0x132, &pl310->pl310_tag_latency_ctrl); - writel(0x132, &pl310->pl310_data_latency_ctrl); - - val = readl(&pl310->pl310_prefetch_ctrl); - - /* Turn on the L2 I/D prefetch */ - val |= 0x30000000; - - /* - * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0 - * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2 - * But according to ARM PL310 errata: 752271 - * ID: 752271: Double linefill feature can cause data corruption - * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2 - * Workaround: The only workaround to this erratum is to disable the - * double linefill feature. This is the default behavior. - */ - -#ifndef CONFIG_MX6Q - val |= 0x40800000; -#endif - writel(val, &pl310->pl310_prefetch_ctrl); - - val = readl(&pl310->pl310_power_ctrl); - val |= L2X0_DYNAMIC_CLK_GATING_EN; - val |= L2X0_STNDBY_MODE_EN; - writel(val, &pl310->pl310_power_ctrl); - - setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN); -} - -void v7_outer_cache_disable(void) -{ - struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE; - - clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN); -} -#endif /* !CONFIG_SYS_L2CACHE_OFF */ |