diff options
Diffstat (limited to 'arch/arm/cpu/armv7/mx7ulp')
| -rw-r--r-- | arch/arm/cpu/armv7/mx7ulp/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/mx7ulp/soc.c | 239 |
2 files changed, 240 insertions, 1 deletions
diff --git a/arch/arm/cpu/armv7/mx7ulp/Makefile b/arch/arm/cpu/armv7/mx7ulp/Makefile index 6f37e8cc77..0248ea85a3 100644 --- a/arch/arm/cpu/armv7/mx7ulp/Makefile +++ b/arch/arm/cpu/armv7/mx7ulp/Makefile @@ -5,4 +5,4 @@ # # -obj-y := clock.o iomux.o pcc.o scg.o +obj-y := soc.o clock.o iomux.o pcc.o scg.o diff --git a/arch/arm/cpu/armv7/mx7ulp/soc.c b/arch/arm/cpu/armv7/mx7ulp/soc.c new file mode 100644 index 0000000000..8713e9bf80 --- /dev/null +++ b/arch/arm/cpu/armv7/mx7ulp/soc.c @@ -0,0 +1,239 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> + +static char *get_reset_cause(char *); + +u32 get_cpu_rev(void) +{ + /* Temporally hard code the CPU rev to 0x73, rev 1.0. Fix it later */ + return (MXC_CPU_MX7ULP << 12) | (1 << 4); +} + +#ifdef CONFIG_REVISION_TAG +u32 __weak get_board_rev(void) +{ + return get_cpu_rev(); +} +#endif + +enum bt_mode get_boot_mode(void) +{ + u32 bt0_cfg = 0; + + bt0_cfg = readl(CMC0_RBASE + 0x40); + bt0_cfg &= (BT0CFG_LPBOOT_MASK | BT0CFG_DUALBOOT_MASK); + + if (!(bt0_cfg & BT0CFG_LPBOOT_MASK)) { + /* No low power boot */ + if (bt0_cfg & BT0CFG_DUALBOOT_MASK) + return DUAL_BOOT; + else + return SINGLE_BOOT; + } + + return LOW_POWER_BOOT; +} + +int arch_cpu_init(void) +{ + return 0; +} + +#ifdef CONFIG_BOARD_POSTCLK_INIT +int board_postclk_init(void) +{ + return 0; +} +#endif + +#define UNLOCK_WORD0 0xC520 /* 1st unlock word */ +#define UNLOCK_WORD1 0xD928 /* 2nd unlock word */ +#define REFRESH_WORD0 0xA602 /* 1st refresh word */ +#define REFRESH_WORD1 0xB480 /* 2nd refresh word */ + +static void disable_wdog(u32 wdog_base) +{ + writel(UNLOCK_WORD0, (wdog_base + 0x04)); + writel(UNLOCK_WORD1, (wdog_base + 0x04)); + writel(0x0, (wdog_base + 0x0C)); /* Set WIN to 0 */ + writel(0x400, (wdog_base + 0x08)); /* Set timeout to default 0x400 */ + writel(0x120, (wdog_base + 0x00)); /* Disable it and set update */ + + writel(REFRESH_WORD0, (wdog_base + 0x04)); /* Refresh the CNT */ + writel(REFRESH_WORD1, (wdog_base + 0x04)); +} + +void init_wdog(void) +{ + /* + * ROM will configure WDOG1, disable it or enable it + * depending on FUSE. The update bit is set for reconfigurable. + * We have to use unlock sequence to reconfigure it. + * WDOG2 is not touched by ROM, so it will have default value + * which is enabled. We can directly configure it. + * To simplify the codes, we still use same reconfigure + * process as WDOG1. Because the update bit is not set for + * WDOG2, the unlock sequence won't take effect really. + * It actually directly configure the wdog. + * In this function, we will disable both WDOG1 and WDOG2, + * and set update bit for both. So that kernel can reconfigure them. + */ + disable_wdog(WDG1_RBASE); + disable_wdog(WDG2_RBASE); +} + + +void s_init(void) +{ + /* Disable wdog */ + init_wdog(); + + /* clock configuration. */ + clock_init(); + + return; +} + +#ifndef CONFIG_ULP_WATCHDOG +void reset_cpu(ulong addr) +{ + setbits_le32(SIM0_RBASE, SIM_SOPT1_A7_SW_RESET); + while (1) + ; +} +#endif + +#if defined(CONFIG_DISPLAY_CPUINFO) +const char *get_imx_type(u32 imxtype) +{ + return "7ULP"; +} + +int print_cpuinfo(void) +{ + u32 cpurev; + char cause[18]; + + cpurev = get_cpu_rev(); + + printf("CPU: Freescale i.MX%s rev%d.%d at %d MHz\n", + get_imx_type((cpurev & 0xFF000) >> 12), + (cpurev & 0x000F0) >> 4, (cpurev & 0x0000F) >> 0, + mxc_get_clock(MXC_ARM_CLK) / 1000000); + + printf("Reset cause: %s\n", get_reset_cause(cause)); + + printf("Boot mode: "); + switch (get_boot_mode()) { + case LOW_POWER_BOOT: + printf("Low power boot\n"); + break; + case DUAL_BOOT: + printf("Dual boot\n"); + break; + case SINGLE_BOOT: + default: + printf("Single boot\n"); + break; + } + + return 0; +} +#endif + +#define CMC_SRS_TAMPER (1 << 31) +#define CMC_SRS_SECURITY (1 << 30) +#define CMC_SRS_TZWDG (1 << 29) +#define CMC_SRS_JTAG_RST (1 << 28) +#define CMC_SRS_CORE1 (1 << 16) +#define CMC_SRS_LOCKUP (1 << 15) +#define CMC_SRS_SW (1 << 14) +#define CMC_SRS_WDG (1 << 13) +#define CMC_SRS_PIN_RESET (1 << 8) +#define CMC_SRS_WARM (1 << 4) +#define CMC_SRS_HVD (1 << 3) +#define CMC_SRS_LVD (1 << 2) +#define CMC_SRS_POR (1 << 1) +#define CMC_SRS_WUP (1 << 0) + +static u32 reset_cause = -1; + +static char *get_reset_cause(char *ret) +{ + u32 cause1, cause = 0, srs = 0; + u32 *reg_ssrs = (u32 *)(SRC_BASE_ADDR + 0x28); + u32 *reg_srs = (u32 *)(SRC_BASE_ADDR + 0x20); + + if (!ret) + return "null"; + + srs = readl(reg_srs); + cause1 = readl(reg_ssrs); + writel(cause1, reg_ssrs); + + reset_cause = cause1; + + cause = cause1 & (CMC_SRS_POR | CMC_SRS_WUP | CMC_SRS_WARM); + + switch (cause) { + case CMC_SRS_POR: + sprintf(ret, "%s", "POR"); + break; + case CMC_SRS_WUP: + sprintf(ret, "%s", "WUP"); + break; + case CMC_SRS_WARM: + cause = cause1 & (CMC_SRS_WDG | CMC_SRS_SW | + CMC_SRS_JTAG_RST); + switch (cause) { + case CMC_SRS_WDG: + sprintf(ret, "%s", "WARM-WDG"); + break; + case CMC_SRS_SW: + sprintf(ret, "%s", "WARM-SW"); + break; + case CMC_SRS_JTAG_RST: + sprintf(ret, "%s", "WARM-JTAG"); + break; + default: + sprintf(ret, "%s", "WARM-UNKN"); + break; + } + break; + default: + sprintf(ret, "%s-%X", "UNKN", cause1); + break; + } + + debug("[%X] SRS[%X] %X - ", cause1, srs, srs^cause1); + return ret; +} + +#ifdef CONFIG_ENV_IS_IN_MMC +__weak int board_mmc_get_env_dev(int devno) +{ + return CONFIG_SYS_MMC_ENV_DEV; +} + +int mmc_get_env_dev(void) +{ + int devno = 0; + u32 bt1_cfg = 0; + + /* If not boot from sd/mmc, use default value */ + if (get_boot_mode() == LOW_POWER_BOOT) + return CONFIG_SYS_MMC_ENV_DEV; + + bt1_cfg = readl(CMC1_RBASE + 0x40); + devno = (bt1_cfg >> 9) & 0x7; + + return board_mmc_get_env_dev(devno); +} +#endif |