diff options
Diffstat (limited to 'arch/arm/cpu/armv7/omap-common')
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/abb.c | 137 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/boot-common.c | 70 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/clocks-common.c | 102 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/emif-common.c | 37 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/hwinit-common.c | 29 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 50 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/reset.c | 4 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/timer.c | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/vc.c | 14 |
10 files changed, 345 insertions, 100 deletions
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index 55e82ba369..c4b9809ad0 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -34,6 +34,7 @@ COBJS += hwinit-common.o COBJS += clocks-common.o COBJS += emif-common.o COBJS += vc.o +COBJS += abb.o endif ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),) diff --git a/arch/arm/cpu/armv7/omap-common/abb.c b/arch/arm/cpu/armv7/omap-common/abb.c new file mode 100644 index 0000000000..87d1fb82eb --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/abb.c @@ -0,0 +1,137 @@ +/* + * + * Adaptive Body Bias programming sequence for OMAP family + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/omap_common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> + +__weak s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb) +{ + return -1; +} + +static void abb_setup_timings(u32 setup) +{ + u32 sys_rate, sr2_cnt, clk_cycles; + + /* + * SR2_WTCNT_VALUE is the settling time for the ABB ldo after a + * transition and must be programmed with the correct time at boot. + * The value programmed into the register is the number of SYS_CLK + * clock cycles that match a given wall time profiled for the ldo. + * This value depends on: + * settling time of ldo in micro-seconds (varies per OMAP family), + * of clock cycles per SYS_CLK period (varies per OMAP family), + * the SYS_CLK frequency in MHz (varies per board) + * The formula is: + * + * ldo settling time (in micro-seconds) + * SR2_WTCNT_VALUE = ------------------------------------------ + * (# system clock cycles) * (sys_clk period) + * + * Put another way: + * + * SR2_WTCNT_VALUE = settling time / (# SYS_CLK cycles / SYS_CLK rate)) + * + * To avoid dividing by zero multiply both "# clock cycles" and + * "settling time" by 10 such that the final result is the one we want. + */ + + /* calculate SR2_WTCNT_VALUE */ + sys_rate = DIV_ROUND(V_OSCK, 1000000); + clk_cycles = DIV_ROUND(OMAP_ABB_CLOCK_CYCLES * 10, sys_rate); + sr2_cnt = DIV_ROUND(OMAP_ABB_SETTLING_TIME * 10, clk_cycles); + + setbits_le32(setup, + sr2_cnt << (ffs(OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK) - 1)); +} + +void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control, + u32 txdone, u32 txdone_mask, u32 opp) +{ + u32 abb_type_mask, opp_sel_mask; + + /* sanity check */ + if (!setup || !control || !txdone) + return; + + /* setup ABB only in case of Fast or Slow OPP */ + switch (opp) { + case OMAP_ABB_FAST_OPP: + abb_type_mask = OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK; + opp_sel_mask = OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK; + break; + case OMAP_ABB_SLOW_OPP: + abb_type_mask = OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK; + opp_sel_mask = OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK; + break; + default: + return; + } + + /* + * For some OMAP silicons additional setup for LDOVBB register is + * required. This is determined by data retrieved from corresponding + * OPP EFUSE register. Data, which is retrieved from EFUSE - is + * ABB enable/disable flag and VSET value, which must be copied + * to LDOVBB register. If function call fails - return quietly, + * it means no ABB is required for such silicon. + * + * For silicons, which don't require LDOVBB setup "fuse" and + * "ldovbb" offsets are not defined. ABB will be initialized in + * the common way for them. + */ + if (fuse && ldovbb) { + if (abb_setup_ldovbb(fuse, ldovbb)) + return; + } + + /* clear ABB registers */ + writel(0, setup); + writel(0, control); + + /* configure timings, based on oscillator value */ + abb_setup_timings(setup); + + /* clear pending interrupts before setup */ + setbits_le32(txdone, txdone_mask); + + /* select ABB type */ + setbits_le32(setup, abb_type_mask | OMAP_ABB_SETUP_SR2EN_MASK); + + /* initiate ABB ldo change */ + setbits_le32(control, opp_sel_mask | OMAP_ABB_CONTROL_OPP_CHANGE_MASK); + + /* wait until transition complete */ + if (!wait_on_value(txdone_mask, txdone_mask, (void *)txdone, LDELAY)) + puts("Error: ABB txdone is not set\n"); + + /* clear ABB tranxdone */ + setbits_le32(txdone, txdone_mask); +} diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index 24cbe2da05..76ae1b675f 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -23,31 +23,56 @@ #include <asm/arch/mmc_host_def.h> #include <asm/arch/sys_proto.h> -/* - * This is used to verify if the configuration header - * was executed by rom code prior to control of transfer - * to the bootloader. SPL is responsible for saving and - * passing the boot_params pointer to the u-boot. - */ -struct omap_boot_parameters boot_params __attribute__ ((section(".data"))); +DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_SPL_BUILD -/* - * We use static variables because global data is not ready yet. - * Initialized data is available in SPL right from the beginning. - * We would not typically need to save these parameters in regular - * U-Boot. This is needed only in SPL at the moment. - */ -u32 omap_bootmode = MMCSD_MODE_FAT; +void save_omap_boot_params(void) +{ + u32 rom_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); + u8 boot_device; + u32 dev_desc, dev_data; + + if ((rom_params < NON_SECURE_SRAM_START) || + (rom_params > NON_SECURE_SRAM_END)) + return; + + /* + * rom_params can be type casted to omap_boot_parameters and + * used. But it not correct to assume that romcode structure + * encoding would be same as u-boot. So use the defined offsets. + */ + gd->arch.omap_boot_params.omap_bootdevice = boot_device = + *((u8 *)(rom_params + BOOT_DEVICE_OFFSET)); + + gd->arch.omap_boot_params.ch_flags = + *((u8 *)(rom_params + CH_FLAGS_OFFSET)); + if ((boot_device >= MMC_BOOT_DEVICES_START) && + (boot_device <= MMC_BOOT_DEVICES_END)) { +#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX) + if ((omap_hw_init_context() == + OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) { + gd->arch.omap_boot_params.omap_bootmode = + *((u8 *)(rom_params + BOOT_MODE_OFFSET)); + } else +#endif + { + dev_desc = *((u32 *)(rom_params + DEV_DESC_PTR_OFFSET)); + dev_data = *((u32 *)(dev_desc + DEV_DATA_PTR_OFFSET)); + gd->arch.omap_boot_params.omap_bootmode = + *((u32 *)(dev_data + BOOT_MODE_OFFSET)); + } + } +} + +#ifdef CONFIG_SPL_BUILD u32 spl_boot_device(void) { - return (u32) (boot_params.omap_bootdevice); + return (u32) (gd->arch.omap_boot_params.omap_bootdevice); } u32 spl_boot_mode(void) { - return omap_bootmode; + return gd->arch.omap_boot_params.omap_bootmode; } void spl_board_init(void) @@ -73,4 +98,15 @@ int board_mmc_init(bd_t *bis) } return 0; } + +void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) +{ + typedef void __noreturn (*image_entry_noargs_t)(u32 *); + image_entry_noargs_t image_entry = + (image_entry_noargs_t) spl_image->entry_point; + + debug("image entry point: 0x%X\n", spl_image->entry_point); + /* Pass the saved boot_params from rom code */ + image_entry((u32 *)&gd->arch.omap_boot_params); +} #endif diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index 2b955c7c00..ef23127bb6 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -30,9 +30,10 @@ * MA 02111-1307 USA */ #include <common.h> +#include <i2c.h> #include <asm/omap_common.h> #include <asm/gpio.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> #include <asm/utils.h> #include <asm/omap_gpio.h> @@ -49,13 +50,12 @@ const u32 sys_clk_array[8] = { 12000000, /* 12 MHz */ - 13000000, /* 13 MHz */ + 20000000, /* 20 MHz */ 16800000, /* 16.8 MHz */ 19200000, /* 19.2 MHz */ 26000000, /* 26 MHz */ 27000000, /* 27 MHz */ 38400000, /* 38.4 MHz */ - 20000000, /* 20 MHz */ }; static inline u32 __get_sys_clk_index(void) @@ -74,13 +74,6 @@ static inline u32 __get_sys_clk_index(void) /* SYS_CLKSEL - 1 to match the dpll param array indices */ ind = (readl((*prcm)->cm_sys_clksel) & CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1; - /* - * SYS_CLKSEL value for 20MHz is 0. This is introduced newly - * in DRA7XX socs. SYS_CLKSEL -1 will be greater than - * NUM_SYS_CLK. So considering the last 3 bits as the index - * for the dpll param array. - */ - ind &= CM_SYS_CLKSEL_SYS_CLKSEL_MASK; } return ind; } @@ -440,6 +433,12 @@ static void setup_non_essential_dplls(void) params = get_abe_dpll_params(*dplls_data); #ifdef CONFIG_SYS_OMAP_ABE_SYSCK abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK; + + if (omap_revision() == DRA752_ES1_0) + /* Select the sys clk for dpll_abe */ + clrsetbits_le32((*prcm)->cm_abe_pll_sys_clksel, + CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK, + CM_ABE_PLL_SYS_CLKSEL_SYSCLK2); #else abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK; /* @@ -487,6 +486,10 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) u32 offset = volt_mv; int ret = 0; + if (!volt_mv) + return; + + pmic->pmic_bus_init(); /* See if we can first get the GPIO if needed */ if (pmic->gpio_en) ret = gpio_request(pmic->gpio, "PMIC_GPIO"); @@ -509,14 +512,45 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv, offset_code); - if (omap_vc_bypass_send_value(SMPS_I2C_SLAVE_ADDR, - vcore_reg, offset_code)) + if (pmic->pmic_write(pmic->i2c_slave_addr, vcore_reg, offset_code)) printf("Scaling voltage failed for 0x%x\n", vcore_reg); if (pmic->gpio_en) gpio_direction_output(pmic->gpio, 1); } +static u32 optimize_vcore_voltage(struct volts const *v) +{ + u32 val; + if (!v->value) + return 0; + if (!v->efuse.reg) + return v->value; + + switch (v->efuse.reg_bits) { + case 16: + val = readw(v->efuse.reg); + break; + case 32: + val = readl(v->efuse.reg); + break; + default: + printf("Error: efuse 0x%08x bits=%d unknown\n", + v->efuse.reg, v->efuse.reg_bits); + return v->value; + } + + if (!val) { + printf("Error: efuse 0x%08x bits=%d val=0, using %d\n", + v->efuse.reg, v->efuse.reg_bits, v->value); + return v->value; + } + + debug("%s:efuse 0x%08x bits=%d Vnom=%d, using efuse value %d\n", + __func__, v->efuse.reg, v->efuse.reg_bits, v->value, val); + return val; +} + /* * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva * We set the maximum voltages allowed here because Smart-Reflex is not @@ -525,16 +559,34 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) */ void scale_vcores(struct vcores_data const *vcores) { - omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); + u32 val; + + val = optimize_vcore_voltage(&vcores->core); + do_scale_vcore(vcores->core.addr, val, vcores->core.pmic); + + val = optimize_vcore_voltage(&vcores->mpu); + do_scale_vcore(vcores->mpu.addr, val, vcores->mpu.pmic); + + /* Configure MPU ABB LDO after scale */ + abb_setup((*ctrl)->control_std_fuse_opp_vdd_mpu_2, + (*ctrl)->control_wkup_ldovbb_mpu_voltage_ctrl, + (*prcm)->prm_abbldo_mpu_setup, + (*prcm)->prm_abbldo_mpu_ctrl, + (*prcm)->prm_irqstatus_mpu_2, + OMAP_ABB_MPU_TXDONE_MASK, + OMAP_ABB_FAST_OPP); - do_scale_vcore(vcores->core.addr, vcores->core.value, - vcores->core.pmic); + val = optimize_vcore_voltage(&vcores->mm); + do_scale_vcore(vcores->mm.addr, val, vcores->mm.pmic); - do_scale_vcore(vcores->mpu.addr, vcores->mpu.value, - vcores->mpu.pmic); + val = optimize_vcore_voltage(&vcores->gpu); + do_scale_vcore(vcores->gpu.addr, val, vcores->gpu.pmic); - do_scale_vcore(vcores->mm.addr, vcores->mm.value, - vcores->mm.pmic); + val = optimize_vcore_voltage(&vcores->eve); + do_scale_vcore(vcores->eve.addr, val, vcores->eve.pmic); + + val = optimize_vcore_voltage(&vcores->iva); + do_scale_vcore(vcores->iva.addr, val, vcores->iva.pmic); if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) { /* Configure LDO SRAM "magic" bits */ @@ -710,12 +762,14 @@ void prcm_init(void) case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: enable_basic_clocks(); + timer_init(); scale_vcores(*omap_vcores); setup_dplls(); #ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL setup_non_essential_dplls(); enable_non_essential_clocks(); #endif + setup_warmreset_time(); break; default: break; @@ -724,3 +778,13 @@ void prcm_init(void) if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context()) enable_basic_uboot_clocks(); } + +void gpi2c_init(void) +{ + static int gpi2c = 1; + + if (gpi2c) { + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + gpi2c = 0; + } +} diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index cdb4439721..652e5a71b3 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -27,7 +27,7 @@ #include <common.h> #include <asm/emif.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> #include <asm/omap_common.h> #include <asm/utils.h> @@ -209,7 +209,8 @@ void emif_update_timings(u32 base, const struct emif_regs *regs) writel(regs->temp_alert_config, &emif->emif_temp_alert_config); writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); - if (omap_revision() >= OMAP5430_ES1_0) { + if ((omap_revision() >= OMAP5430_ES1_0) || + (omap_revision() == DRA752_ES1_0)) { writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0, &emif->emif_l3_config); } else if (omap_revision() >= OMAP4460_ES1_0) { @@ -263,6 +264,18 @@ static void ddr3_leveling(u32 base, const struct emif_regs *regs) __udelay(130); } +static void ddr3_sw_leveling(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); + config_data_eye_leveling_samples(base); + + writel(regs->emif_rd_wr_lvl_ctl, &emif->emif_rd_wr_lvl_ctl); + writel(regs->sdram_config, &emif->emif_sdram_config); +} + static void ddr3_init(u32 base, const struct emif_regs *regs) { struct emif_reg_struct *emif = (struct emif_reg_struct *)base; @@ -273,6 +286,7 @@ static void ddr3_init(u32 base, const struct emif_regs *regs) * defined, contents of mode Registers must be fully initialized. * H/W takes care of this initialization */ + writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config); writel(regs->sdram_config_init, &emif->emif_sdram_config); writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1); @@ -290,7 +304,10 @@ static void ddr3_init(u32 base, const struct emif_regs *regs) /* enable leveling */ writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl); - ddr3_leveling(base, regs); + if (omap_revision() == DRA752_ES1_0) + ddr3_sw_leveling(base, regs); + else + ddr3_leveling(base, regs); } #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS @@ -1075,6 +1092,14 @@ static void do_sdram_init(u32 base) else ddr3_init(base, regs); } + if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) { + set_lpmode_selfrefresh(base); + emif_reset_phy(base); + if (omap_revision() == DRA752_ES1_0) + ddr3_sw_leveling(base, regs); + else + ddr3_leveling(base, regs); + } /* Write to the shadow registers */ emif_update_timings(base, regs); @@ -1262,10 +1287,10 @@ void sdram_init(void) in_sdram = running_from_sdram(); debug("in_sdram = %d\n", in_sdram); - if (!(in_sdram || warm_reset())) { - if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2) + if (!in_sdram) { + if ((sdram_type == EMIF_SDRAM_TYPE_LPDDR2) && !warm_reset()) bypass_dpll((*prcm)->cm_clkmode_dpll_core); - else + else if (sdram_type == EMIF_SDRAM_TYPE_DDR3) writel(CM_DLL_CTRL_NO_OVERRIDE, (*prcm)->cm_dll_ctrl); } diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index 70d16a8160..5df116edbe 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -84,7 +84,7 @@ u32 cortex_rev(void) return rev; } -void omap_rev_string(void) +static void omap_rev_string(void) { u32 omap_rev = omap_revision(); u32 soc_variant = (omap_rev & 0xF0000000) >> 28; @@ -101,11 +101,6 @@ void omap_rev_string(void) } #ifdef CONFIG_SPL_BUILD -static void init_boot_params(void) -{ - boot_params_ptr = (u32 *) &boot_params; -} - void spl_display_print(void) { omap_rev_string(); @@ -116,6 +111,17 @@ void __weak srcomp_enable(void) { } +#ifdef CONFIG_ARCH_CPU_INIT +/* + * SOC specific cpu init + */ +int arch_cpu_init(void) +{ + save_omap_boot_params(); + return 0; +} +#endif /* CONFIG_ARCH_CPU_INIT */ + /* * Routine: s_init * Description: Does early system init of watchdog, muxing, andclocks @@ -132,6 +138,14 @@ void __weak srcomp_enable(void) */ void s_init(void) { + /* + * Save the boot parameters passed from romcode. + * We cannot delay the saving further than this, + * to prevent overwrites. + */ +#ifdef CONFIG_SPL_BUILD + save_omap_boot_params(); +#endif init_omap_revision(); hw_data_init(); @@ -152,11 +166,8 @@ void s_init(void) #endif prcm_init(); #ifdef CONFIG_SPL_BUILD - timer_init(); - /* For regular u-boot sdram_init() is called from dram_init() */ sdram_init(); - init_boot_params(); #endif } diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index 90b3c8aea4..c4895369bf 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -28,59 +28,13 @@ #include <config.h> #include <asm/arch/omap.h> +#include <asm/omap_common.h> #include <asm/arch/spl.h> #include <linux/linkage.h> ENTRY(save_boot_params) - /* - * See if the rom code passed pointer is valid: - * It is not valid if it is not in non-secure SRAM - * This may happen if you are booting with the help of - * debugger - */ - ldr r2, =NON_SECURE_SRAM_START - cmp r2, r0 - bgt 1f - ldr r2, =NON_SECURE_SRAM_END - cmp r2, r0 - blt 1f - - /* - * store the boot params passed from rom code or saved - * and passed by SPL - */ - cmp r0, #0 - beq 1f - ldr r1, =boot_params + ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS str r0, [r1] -#ifdef CONFIG_SPL_BUILD - /* Store the boot device in spl_boot_device */ - ldrb r2, [r0, #BOOT_DEVICE_OFFSET] @ r1 <- value of boot device - and r2, #BOOT_DEVICE_MASK - ldr r3, =boot_params - strb r2, [r3, #BOOT_DEVICE_OFFSET] @ spl_boot_device <- r1 - - /* - * boot mode is only valid for device that can be raw or FAT booted. - * in other cases it may be fatal to look. While platforms differ - * in the values used for each MMC slot, they are contiguous. - */ - cmp r2, #MMC_BOOT_DEVICES_START - blt 2f - cmp r2, #MMC_BOOT_DEVICES_END - bgt 2f - /* Store the boot mode (raw/FAT) in omap_bootmode */ - ldr r2, [r0, #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr - ldr r2, [r2, #DEV_DATA_PTR_OFFSET] @ get the pDeviceData ptr - ldr r2, [r2, #BOOT_MODE_OFFSET] @ get the boot mode - ldr r3, =omap_bootmode - str r2, [r3] -#endif -2: - ldrb r2, [r0, #CH_FLAGS_OFFSET] - ldr r3, =boot_params - strb r2, [r3, #CH_FLAGS_OFFSET] -1: bx lr ENDPROC(save_boot_params) diff --git a/arch/arm/cpu/armv7/omap-common/reset.c b/arch/arm/cpu/armv7/omap-common/reset.c index 587bb47745..57ea9d9999 100644 --- a/arch/arm/cpu/armv7/omap-common/reset.c +++ b/arch/arm/cpu/armv7/omap-common/reset.c @@ -39,3 +39,7 @@ u32 __weak warm_reset(void) { return (readl(PRM_RSTST) & PRM_RSTST_WARM_RESET_MASK); } + +void __weak setup_warmreset_time(void) +{ +} diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c index 507f6873e9..5926a5a810 100644 --- a/arch/arm/cpu/armv7/omap-common/timer.c +++ b/arch/arm/cpu/armv7/omap-common/timer.c @@ -35,6 +35,7 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/cpu.h> +#include <asm/arch/clock.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/arm/cpu/armv7/omap-common/vc.c b/arch/arm/cpu/armv7/omap-common/vc.c index e6e5f7893c..a68f1d145d 100644 --- a/arch/arm/cpu/armv7/omap-common/vc.c +++ b/arch/arm/cpu/armv7/omap-common/vc.c @@ -17,6 +17,7 @@ #include <common.h> #include <asm/omap_common.h> #include <asm/arch/sys_proto.h> +#include <asm/arch/clock.h> /* * Define Master code if there are multiple masters on the I2C_SR bus. @@ -57,7 +58,7 @@ * omap_vc_init() - Initialization for Voltage controller * @speed_khz: I2C buspeed in KHz */ -void omap_vc_init(u16 speed_khz) +static void omap_vc_init(u16 speed_khz) { u32 val; u32 sys_clk_khz, cycles_hi, cycles_low; @@ -137,3 +138,14 @@ int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data) /* All good.. */ return 0; } + +void sri2c_init(void) +{ + static int sri2c = 1; + + if (sri2c) { + omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); + sri2c = 0; + } + return; +} |