diff options
Diffstat (limited to 'arch/arm/cpu/armv7/omap4/hwinit.c')
| -rw-r--r-- | arch/arm/cpu/armv7/omap4/hwinit.c | 177 |
1 files changed, 0 insertions, 177 deletions
diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c deleted file mode 100644 index 7c6638ca80..0000000000 --- a/arch/arm/cpu/armv7/omap4/hwinit.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * - * Common functions for OMAP4 based boards - * - * (C) Copyright 2010 - * Texas Instruments, <www.ti.com> - * - * Author : - * Aneesh V <aneesh@ti.com> - * Steve Sakoman <steve@sakoman.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <asm/armv7.h> -#include <asm/arch/cpu.h> -#include <asm/arch/sys_proto.h> -#include <linux/sizes.h> -#include <asm/emif.h> -#include <asm/arch/gpio.h> -#include <asm/omap_common.h> - -DECLARE_GLOBAL_DATA_PTR; - -u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV; - -static const struct gpio_bank gpio_bank_44xx[6] = { - { (void *)OMAP44XX_GPIO1_BASE }, - { (void *)OMAP44XX_GPIO2_BASE }, - { (void *)OMAP44XX_GPIO3_BASE }, - { (void *)OMAP44XX_GPIO4_BASE }, - { (void *)OMAP44XX_GPIO5_BASE }, - { (void *)OMAP44XX_GPIO6_BASE }, -}; - -const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx; - -#ifdef CONFIG_SPL_BUILD -/* - * Some tuning of IOs for optimal power and performance - */ -void do_io_settings(void) -{ - u32 lpddr2io; - - u32 omap4_rev = omap_revision(); - - if (omap4_rev == OMAP4430_ES1_0) - lpddr2io = CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN; - else if (omap4_rev == OMAP4430_ES2_0) - lpddr2io = CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER; - else - lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN; - - /* EMIF1 */ - writel(lpddr2io, (*ctrl)->control_lpddr2io1_0); - writel(lpddr2io, (*ctrl)->control_lpddr2io1_1); - /* No pull for GR10 as per hw team's recommendation */ - writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, - (*ctrl)->control_lpddr2io1_2); - writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io1_3); - - /* EMIF2 */ - writel(lpddr2io, (*ctrl)->control_lpddr2io2_0); - writel(lpddr2io, (*ctrl)->control_lpddr2io2_1); - /* No pull for GR10 as per hw team's recommendation */ - writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, - (*ctrl)->control_lpddr2io2_2); - writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io2_3); - - /* - * Some of these settings (TRIM values) come from eFuse and are - * in turn programmed in the eFuse at manufacturing time after - * calibration of the device. Do the software over-ride only if - * the device is not correctly trimmed - */ - if (!(readl((*ctrl)->control_std_fuse_opp_bgap) & 0xFFFF)) { - - writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - (*ctrl)->control_ldosram_iva_voltage_ctrl); - - writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - (*ctrl)->control_ldosram_mpu_voltage_ctrl); - - writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - (*ctrl)->control_ldosram_core_voltage_ctrl); - } - - /* - * Over-ride the register - * i. unconditionally for all 4430 - * ii. only if un-trimmed for 4460 - */ - if (!readl((*ctrl)->control_efuse_1)) - writel(CONTROL_EFUSE_1_OVERRIDE, (*ctrl)->control_efuse_1); - - if ((omap4_rev < OMAP4460_ES1_0) || !readl((*ctrl)->control_efuse_2)) - writel(CONTROL_EFUSE_2_OVERRIDE, (*ctrl)->control_efuse_2); -} -#endif /* CONFIG_SPL_BUILD */ - -/* dummy fuction for omap4 */ -void config_data_eye_leveling_samples(u32 emif_base) -{ -} - -void init_omap_revision(void) -{ - /* - * For some of the ES2/ES1 boards ID_CODE is not reliable: - * Also, ES1 and ES2 have different ARM revisions - * So use ARM revision for identification - */ - unsigned int arm_rev = cortex_rev(); - - switch (arm_rev) { - case MIDR_CORTEX_A9_R0P1: - *omap_si_rev = OMAP4430_ES1_0; - break; - case MIDR_CORTEX_A9_R1P2: - switch (readl(CONTROL_ID_CODE)) { - case OMAP4_CONTROL_ID_CODE_ES2_0: - *omap_si_rev = OMAP4430_ES2_0; - break; - case OMAP4_CONTROL_ID_CODE_ES2_1: - *omap_si_rev = OMAP4430_ES2_1; - break; - case OMAP4_CONTROL_ID_CODE_ES2_2: - *omap_si_rev = OMAP4430_ES2_2; - break; - default: - *omap_si_rev = OMAP4430_ES2_0; - break; - } - break; - case MIDR_CORTEX_A9_R1P3: - *omap_si_rev = OMAP4430_ES2_3; - break; - case MIDR_CORTEX_A9_R2P10: - switch (readl(CONTROL_ID_CODE)) { - case OMAP4470_CONTROL_ID_CODE_ES1_0: - *omap_si_rev = OMAP4470_ES1_0; - break; - case OMAP4460_CONTROL_ID_CODE_ES1_1: - *omap_si_rev = OMAP4460_ES1_1; - break; - case OMAP4460_CONTROL_ID_CODE_ES1_0: - default: - *omap_si_rev = OMAP4460_ES1_0; - break; - } - break; - default: - *omap_si_rev = OMAP4430_SILICON_ID_INVALID; - break; - } -} - -void omap_die_id(unsigned int *die_id) -{ - die_id[0] = readl((*ctrl)->control_std_fuse_die_id_0); - die_id[1] = readl((*ctrl)->control_std_fuse_die_id_1); - die_id[2] = readl((*ctrl)->control_std_fuse_die_id_2); - die_id[3] = readl((*ctrl)->control_std_fuse_die_id_3); -} - -#ifndef CONFIG_SYS_L2CACHE_OFF -void v7_outer_cache_enable(void) -{ - omap_smc1(OMAP4_SERVICE_PL310_CONTROL_REG_SET, 1); -} - -void v7_outer_cache_disable(void) -{ - omap_smc1(OMAP4_SERVICE_PL310_CONTROL_REG_SET, 0); -} -#endif /* !CONFIG_SYS_L2CACHE_OFF */ |