diff options
Diffstat (limited to 'arch/arm/cpu/armv7/socfpga/clock_manager.c')
| -rw-r--r-- | arch/arm/cpu/armv7/socfpga/clock_manager.c | 122 |
1 files changed, 47 insertions, 75 deletions
diff --git a/arch/arm/cpu/armv7/socfpga/clock_manager.c b/arch/arm/cpu/armv7/socfpga/clock_manager.c index ed2b419453..1cf0d77fb5 100644 --- a/arch/arm/cpu/armv7/socfpga/clock_manager.c +++ b/arch/arm/cpu/armv7/socfpga/clock_manager.c @@ -13,25 +13,6 @@ DECLARE_GLOBAL_DATA_PTR; static const struct socfpga_clock_manager *clock_manager_base = (struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS; -#define CLKMGR_BYPASS_ENABLE 1 -#define CLKMGR_BYPASS_DISABLE 0 -#define CLKMGR_STAT_IDLE 0 -#define CLKMGR_STAT_BUSY 1 -#define CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1 0 -#define CLKMGR_BYPASS_PERPLLSRC_SELECT_INPUT_MUX 1 -#define CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1 0 -#define CLKMGR_BYPASS_SDRPLLSRC_SELECT_INPUT_MUX 1 - -#define CLEAR_BGP_EN_PWRDN \ - (CLKMGR_MAINPLLGRP_VCO_PWRDN_SET(0)| \ - CLKMGR_MAINPLLGRP_VCO_EN_SET(0)| \ - CLKMGR_MAINPLLGRP_VCO_BGPWRDN_SET(0)) - -#define VCO_EN_BASE \ - (CLKMGR_MAINPLLGRP_VCO_PWRDN_SET(0)| \ - CLKMGR_MAINPLLGRP_VCO_EN_SET(1)| \ - CLKMGR_MAINPLLGRP_VCO_BGPWRDN_SET(0)) - static void cm_wait_for_lock(uint32_t mask) { register uint32_t inter_val; @@ -130,14 +111,8 @@ void cm_basic_init(const cm_config_t *cfg) writel(0, &clock_manager_base->per_pll.en); /* Put all plls in bypass */ - cm_write_bypass( - CLKMGR_BYPASS_PERPLLSRC_SET( - CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1) | - CLKMGR_BYPASS_SDRPLLSRC_SET( - CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1) | - CLKMGR_BYPASS_PERPLL_SET(CLKMGR_BYPASS_ENABLE) | - CLKMGR_BYPASS_SDRPLL_SET(CLKMGR_BYPASS_ENABLE) | - CLKMGR_BYPASS_MAINPLL_SET(CLKMGR_BYPASS_ENABLE)); + cm_write_bypass(CLKMGR_BYPASS_PERPLL | CLKMGR_BYPASS_SDRPLL | + CLKMGR_BYPASS_MAINPLL); /* * Put all plls VCO registers back to reset value. @@ -172,19 +147,14 @@ void cm_basic_init(const cm_config_t *cfg) * We made sure bgpwr down was assert for 5 us. Now deassert BG PWR DN * with numerator and denominator. */ - writel(cfg->main_vco_base | CLEAR_BGP_EN_PWRDN | - CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK, - &clock_manager_base->main_pll.vco); - - writel(cfg->peri_vco_base | CLEAR_BGP_EN_PWRDN | - CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK, - &clock_manager_base->per_pll.vco); - - writel(CLKMGR_SDRPLLGRP_VCO_OUTRESET_SET(0) | - CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) | - cfg->sdram_vco_base | CLEAR_BGP_EN_PWRDN | - CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK, - &clock_manager_base->sdr_pll.vco); + writel(cfg->main_vco_base | CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK, + &clock_manager_base->main_pll.vco); + + writel(cfg->peri_vco_base | CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK, + &clock_manager_base->per_pll.vco); + + writel(cfg->sdram_vco_base | CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK, + &clock_manager_base->sdr_pll.vco); /* * Time starts here @@ -234,18 +204,16 @@ void cm_basic_init(const cm_config_t *cfg) /* Enable vco */ /* main pll vco */ - writel(cfg->main_vco_base | VCO_EN_BASE, + writel(cfg->main_vco_base | CLKMGR_MAINPLLGRP_VCO_EN, &clock_manager_base->main_pll.vco); /* periferal pll */ - writel(cfg->peri_vco_base | VCO_EN_BASE, + writel(cfg->peri_vco_base | CLKMGR_MAINPLLGRP_VCO_EN, &clock_manager_base->per_pll.vco); /* sdram pll vco */ - writel(CLKMGR_SDRPLLGRP_VCO_OUTRESET_SET(0) | - CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) | - cfg->sdram_vco_base | VCO_EN_BASE, - &clock_manager_base->sdr_pll.vco); + writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN, + &clock_manager_base->sdr_pll.vco); /* L3 MP and L3 SP */ writel(cfg->maindiv, &clock_manager_base->main_pll.maindiv); @@ -296,8 +264,8 @@ void cm_basic_init(const cm_config_t *cfg) &clock_manager_base->per_pll.vco); /* assert sdram outresetall */ - writel(cfg->sdram_vco_base | VCO_EN_BASE| - CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(1), + writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN| + CLKMGR_SDRPLLGRP_VCO_OUTRESETALL, &clock_manager_base->sdr_pll.vco); /* deassert main outresetall */ @@ -309,9 +277,8 @@ void cm_basic_init(const cm_config_t *cfg) &clock_manager_base->per_pll.vco); /* deassert sdram outresetall */ - writel(CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) | - cfg->sdram_vco_base | VCO_EN_BASE, - &clock_manager_base->sdr_pll.vco); + writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN, + &clock_manager_base->sdr_pll.vco); /* * now that we've toggled outreset all, all the clocks @@ -335,18 +302,10 @@ void cm_basic_init(const cm_config_t *cfg) CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK); /* Take all three PLLs out of bypass when safe mode is cleared. */ - cm_write_bypass( - CLKMGR_BYPASS_PERPLLSRC_SET( - CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1) | - CLKMGR_BYPASS_SDRPLLSRC_SET( - CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1) | - CLKMGR_BYPASS_PERPLL_SET(CLKMGR_BYPASS_DISABLE) | - CLKMGR_BYPASS_SDRPLL_SET(CLKMGR_BYPASS_DISABLE) | - CLKMGR_BYPASS_MAINPLL_SET(CLKMGR_BYPASS_DISABLE)); + cm_write_bypass(0); /* clear safe mode */ - cm_write_ctrl(readl(&clock_manager_base->ctrl) | - CLKMGR_CTRL_SAFEMODE_SET(CLKMGR_CTRL_SAFEMODE_MASK)); + cm_write_ctrl(readl(&clock_manager_base->ctrl) | CLKMGR_CTRL_SAFEMODE); /* * now that safe mode is clear with clocks gated @@ -367,9 +326,11 @@ static unsigned int cm_get_main_vco_clk_hz(void) /* get the main VCO clock */ reg = readl(&clock_manager_base->main_pll.vco); - clock = CONFIG_HPS_CLK_OSC1_HZ / - (CLKMGR_MAINPLLGRP_VCO_DENOM_GET(reg) + 1); - clock *= (CLKMGR_MAINPLLGRP_VCO_NUMER_GET(reg) + 1); + clock = CONFIG_HPS_CLK_OSC1_HZ; + clock /= ((reg & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >> + CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) + 1; + clock *= ((reg & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >> + CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET) + 1; return clock; } @@ -380,7 +341,8 @@ static unsigned int cm_get_per_vco_clk_hz(void) /* identify PER PLL clock source */ reg = readl(&clock_manager_base->per_pll.vco); - reg = CLKMGR_PERPLLGRP_VCO_SSRC_GET(reg); + reg = (reg & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >> + CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET; if (reg == CLKMGR_VCO_SSRC_EOSC1) clock = CONFIG_HPS_CLK_OSC1_HZ; else if (reg == CLKMGR_VCO_SSRC_EOSC2) @@ -390,8 +352,10 @@ static unsigned int cm_get_per_vco_clk_hz(void) /* get the PER VCO clock */ reg = readl(&clock_manager_base->per_pll.vco); - clock /= (CLKMGR_PERPLLGRP_VCO_DENOM_GET(reg) + 1); - clock *= (CLKMGR_PERPLLGRP_VCO_NUMER_GET(reg) + 1); + clock /= ((reg & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >> + CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) + 1; + clock *= ((reg & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >> + CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET) + 1; return clock; } @@ -416,7 +380,8 @@ unsigned long cm_get_sdram_clk_hz(void) /* identify SDRAM PLL clock source */ reg = readl(&clock_manager_base->sdr_pll.vco); - reg = CLKMGR_SDRPLLGRP_VCO_SSRC_GET(reg); + reg = (reg & CLKMGR_SDRPLLGRP_VCO_SSRC_MASK) >> + CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET; if (reg == CLKMGR_VCO_SSRC_EOSC1) clock = CONFIG_HPS_CLK_OSC1_HZ; else if (reg == CLKMGR_VCO_SSRC_EOSC2) @@ -426,12 +391,15 @@ unsigned long cm_get_sdram_clk_hz(void) /* get the SDRAM VCO clock */ reg = readl(&clock_manager_base->sdr_pll.vco); - clock /= (CLKMGR_SDRPLLGRP_VCO_DENOM_GET(reg) + 1); - clock *= (CLKMGR_SDRPLLGRP_VCO_NUMER_GET(reg) + 1); + clock /= ((reg & CLKMGR_SDRPLLGRP_VCO_DENOM_MASK) >> + CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET) + 1; + clock *= ((reg & CLKMGR_SDRPLLGRP_VCO_NUMER_MASK) >> + CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET) + 1; /* get the SDRAM (DDR_DQS) clock */ reg = readl(&clock_manager_base->sdr_pll.ddrdqsclk); - reg = CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_GET(reg); + reg = (reg & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK) >> + CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET; clock /= (reg + 1); return clock; @@ -443,7 +411,8 @@ unsigned int cm_get_l4_sp_clk_hz(void) /* identify the source of L4 SP clock */ reg = readl(&clock_manager_base->main_pll.l4src); - reg = CLKMGR_MAINPLLGRP_L4SRC_L4SP_GET(reg); + reg = (reg & CLKMGR_MAINPLLGRP_L4SRC_L4SP) >> + CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET; if (reg == CLKMGR_L4_SP_CLK_SRC_MAINPLL) { clock = cm_get_main_vco_clk_hz(); @@ -463,7 +432,8 @@ unsigned int cm_get_l4_sp_clk_hz(void) /* get the L4 SP clock which supplied to UART */ reg = readl(&clock_manager_base->main_pll.maindiv); - reg = CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_GET(reg); + reg = (reg & CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK) >> + CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET; clock = clock / (1 << reg); return clock; @@ -475,7 +445,8 @@ unsigned int cm_get_mmc_controller_clk_hz(void) /* identify the source of MMC clock */ reg = readl(&clock_manager_base->per_pll.src); - reg = CLKMGR_PERPLLGRP_SRC_SDMMC_GET(reg); + reg = (reg & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >> + CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET; if (reg == CLKMGR_SDMMC_CLK_SRC_F2S) { clock = CONFIG_HPS_CLK_F2S_PER_REF_HZ; @@ -504,7 +475,8 @@ unsigned int cm_get_qspi_controller_clk_hz(void) /* identify the source of QSPI clock */ reg = readl(&clock_manager_base->per_pll.src); - reg = CLKMGR_PERPLLGRP_SRC_QSPI_GET(reg); + reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >> + CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET; if (reg == CLKMGR_QSPI_CLK_SRC_F2S) { clock = CONFIG_HPS_CLK_F2S_PER_REF_HZ; |