summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv7/sunxi/board.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/cpu/armv7/sunxi/board.c')
-rw-r--r--arch/arm/cpu/armv7/sunxi/board.c272
1 files changed, 0 insertions, 272 deletions
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
deleted file mode 100644
index eb5f4b686e..0000000000
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
- *
- * (C) Copyright 2007-2011
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Tom Cubie <tangliang@allwinnertech.com>
- *
- * Some init for sunxi platform.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mmc.h>
-#include <i2c.h>
-#include <serial.h>
-#ifdef CONFIG_SPL_BUILD
-#include <spl.h>
-#endif
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/spl.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/timer.h>
-#include <asm/arch/tzpc.h>
-#include <asm/arch/mmc.h>
-
-#include <linux/compiler.h>
-
-struct fel_stash {
- uint32_t sp;
- uint32_t lr;
- uint32_t cpsr;
- uint32_t sctlr;
- uint32_t vbar;
- uint32_t cr;
-};
-
-struct fel_stash fel_stash __attribute__((section(".data")));
-
-static int gpio_init(void)
-{
-#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
- /* disable GPB22,23 as uart0 tx,rx to avoid conflict */
- sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT);
-#endif
-#if defined(CONFIG_MACH_SUN8I)
- sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUN8I_GPF_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUN8I_GPF_UART0);
-#else
- sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF_UART0);
-#endif
- sunxi_gpio_set_pull(SUNXI_GPF(4), 1);
-#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I))
- sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB_UART0);
- sunxi_gpio_set_pull(SUNXI_GPB(23), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN5I)
- sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB_UART0);
- sunxi_gpio_set_pull(SUNXI_GPB(20), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN6I)
- sunxi_gpio_set_cfgpin(SUNXI_GPH(20), SUN6I_GPH_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPH(21), SUN6I_GPH_UART0);
- sunxi_gpio_set_pull(SUNXI_GPH(21), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A33)
- sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_A33_GPB_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_A33_GPB_UART0);
- sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_H3)
- sunxi_gpio_set_cfgpin(SUNXI_GPA(4), SUN8I_H3_GPA_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPA(5), SUN8I_H3_GPA_UART0);
- sunxi_gpio_set_pull(SUNXI_GPA(5), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A83T)
- sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0);
- sunxi_gpio_set_pull(SUNXI_GPB(10), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN9I)
- sunxi_gpio_set_cfgpin(SUNXI_GPH(12), SUN9I_GPH_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPH(13), SUN9I_GPH_UART0);
- sunxi_gpio_set_pull(SUNXI_GPH(13), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
- sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1);
- sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1);
- sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
- sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_GPB_UART2);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_GPB_UART2);
- sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
- sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL_R_UART);
- sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL_R_UART);
- sunxi_gpio_set_pull(SUNXI_GPL(3), SUNXI_GPIO_PULL_UP);
-#else
-#error Unsupported console port number. Please fix pin mux settings in board.c
-#endif
-
- return 0;
-}
-
-int spl_board_load_image(void)
-{
- debug("Returning to FEL sp=%x, lr=%x\n", fel_stash.sp, fel_stash.lr);
- return_to_fel(fel_stash.sp, fel_stash.lr);
-
- return 0;
-}
-
-void s_init(void)
-{
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I_A23
- /* Magic (undocmented) value taken from boot0, without this DRAM
- * access gets messed up (seems cache related) */
- setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
-#endif
-#if defined CONFIG_MACH_SUN6I || \
- defined CONFIG_MACH_SUN7I || \
- defined CONFIG_MACH_SUN8I
- /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
- asm volatile(
- "mrc p15, 0, r0, c1, c0, 1\n"
- "orr r0, r0, #1 << 6\n"
- "mcr p15, 0, r0, c1, c0, 1\n");
-#endif
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I_H3
- /* Enable non-secure access to some peripherals */
- tzpc_init();
-#endif
-
- clock_init();
- timer_init();
- gpio_init();
- i2c_init_board();
-}
-
-#ifdef CONFIG_SPL_BUILD
-DECLARE_GLOBAL_DATA_PTR;
-
-/* The sunxi internal brom will try to loader external bootloader
- * from mmc0, nand flash, mmc2.
- */
-u32 spl_boot_device(void)
-{
- __maybe_unused struct mmc *mmc0, *mmc1;
- /*
- * When booting from the SD card or NAND memory, the "eGON.BT0"
- * signature is expected to be found in memory at the address 0x0004
- * (see the "mksunxiboot" tool, which generates this header).
- *
- * When booting in the FEL mode over USB, this signature is patched in
- * memory and replaced with something else by the 'fel' tool. This other
- * signature is selected in such a way, that it can't be present in a
- * valid bootable SD card image (because the BROM would refuse to
- * execute the SPL in this case).
- *
- * This checks for the signature and if it is not found returns to
- * the FEL code in the BROM to wait and receive the main u-boot
- * binary over USB. If it is found, it determines where SPL was
- * read from.
- */
- if (!is_boot0_magic(SPL_ADDR + 4)) /* eGON.BT0 */
- return BOOT_DEVICE_BOARD;
-
- /* The BROM will try to boot from mmc0 first, so try that first. */
-#ifdef CONFIG_MMC
- mmc_initialize(gd->bd);
- mmc0 = find_mmc_device(0);
- if (sunxi_mmc_has_egon_boot_signature(mmc0))
- return BOOT_DEVICE_MMC1;
-#endif
-
- /* Fallback to booting NAND if enabled. */
- if (IS_ENABLED(CONFIG_SPL_NAND_SUPPORT))
- return BOOT_DEVICE_NAND;
-
-#ifdef CONFIG_MMC
- if (CONFIG_MMC_SUNXI_SLOT_EXTRA == 2) {
- mmc1 = find_mmc_device(1);
- if (sunxi_mmc_has_egon_boot_signature(mmc1))
- return BOOT_DEVICE_MMC2;
- }
-#endif
-
- panic("Could not determine boot source\n");
- return -1; /* Never reached */
-}
-
-/* No confirmation data available in SPL yet. Hardcode bootmode */
-u32 spl_boot_mode(void)
-{
- return MMCSD_MODE_RAW;
-}
-
-void board_init_f(ulong dummy)
-{
- spl_init();
- preloader_console_init();
-
-#ifdef CONFIG_SPL_I2C_SUPPORT
- /* Needed early by sunxi_board_init if PMU is enabled */
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
- sunxi_board_init();
-}
-#endif
-
-void reset_cpu(ulong addr)
-{
-#ifdef CONFIG_SUNXI_GEN_SUN4I
- static const struct sunxi_wdog *wdog =
- &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
-
- /* Set the watchdog for its shortest interval (.5s) and wait */
- writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
- writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
-
- while (1) {
- /* sun5i sometimes gets stuck without this */
- writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
- }
-#endif
-#ifdef CONFIG_SUNXI_GEN_SUN6I
- static const struct sunxi_wdog *wdog =
- ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
-
- /* Set the watchdog for its shortest interval (.5s) and wait */
- writel(WDT_CFG_RESET, &wdog->cfg);
- writel(WDT_MODE_EN, &wdog->mode);
- writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
- while (1) { }
-#endif
-}
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-void enable_caches(void)
-{
- /* Enable D-cache. I-cache is already enabled in start.S */
- dcache_enable();
-}
-#endif
-
-#ifdef CONFIG_CMD_NET
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
- __maybe_unused int rc;
-
-#ifdef CONFIG_MACPWR
- gpio_request(CONFIG_MACPWR, "macpwr");
- gpio_direction_output(CONFIG_MACPWR, 1);
- mdelay(200);
-#endif
-
-#ifdef CONFIG_SUNXI_GMAC
- rc = sunxi_gmac_initialize(bis);
- if (rc < 0) {
- printf("sunxi: failed to initialize gmac\n");
- return rc;
- }
-#endif
-
- return 0;
-}
-#endif
generated by cgit (git 2.34.1) at 2025-01-06 14:48:37 +0000