1 files changed, 0 insertions, 308 deletions

diff --git a/arch/arm/cpu/armv7/sunxi/usbc.c b/arch/arm/cpu/armv7/sunxi/usbc.c
deleted file mode 100644
index a0e9604cfa..0000000000
--- a/arch/arm/cpu/armv7/sunxi/usbc.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * Sunxi usb-controller code shared between the ehci and musb controllers
- *
- * Copyright (C) 2014 Roman Byshko
- *
- * Roman Byshko <rbyshko@gmail.com>
- *
- * Based on code from
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm/arch/clock.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/usbc.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <common.h>
-#ifdef CONFIG_AXP152_POWER
-#include <axp152.h>
-#endif
-#ifdef CONFIG_AXP209_POWER
-#include <axp209.h>
-#endif
-#ifdef CONFIG_AXP221_POWER
-#include <axp221.h>
-#endif
-
-#define SUNXI_USB_PMU_IRQ_ENABLE	0x800
-#define SUNXI_USB_CSR			0x404
-#define SUNXI_USB_PASSBY_EN		1
-
-#define SUNXI_EHCI_AHB_ICHR8_EN		(1 << 10)
-#define SUNXI_EHCI_AHB_INCR4_BURST_EN	(1 << 9)
-#define SUNXI_EHCI_AHB_INCRX_ALIGN_EN	(1 << 8)
-#define SUNXI_EHCI_ULPI_BYPASS_EN	(1 << 0)
-
-static struct sunxi_usbc_hcd {
-	struct usb_hcd *hcd;
-	int usb_rst_mask;
-	int ahb_clk_mask;
-	int gpio_vbus;
-	int gpio_vbus_det;
-	int irq;
-	int id;
-} sunxi_usbc_hcd[] = {
-	{
-		.usb_rst_mask = CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK,
-		.ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB0,
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
-		.irq = 71,
-#else
-		.irq = 38,
-#endif
-		.id = 0,
-	},
-	{
-		.usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK,
-		.ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0,
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
-		.irq = 72,
-#else
-		.irq = 39,
-#endif
-		.id = 1,
-	},
-#if (CONFIG_USB_MAX_CONTROLLER_COUNT > 1)
-	{
-		.usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
-		.ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI1,
-#ifdef CONFIG_MACH_SUN6I
-		.irq = 74,
-#else
-		.irq = 40,
-#endif
-		.id = 2,
-	}
-#endif
-};
-
-static int enabled_hcd_count;
-
-void *sunxi_usbc_get_io_base(int index)
-{
-	switch (index) {
-	case 0:
-		return (void *)SUNXI_USB0_BASE;
-	case 1:
-		return (void *)SUNXI_USB1_BASE;
-	case 2:
-		return (void *)SUNXI_USB2_BASE;
-	default:
-		return NULL;
-	}
-}
-
-static int get_vbus_gpio(int index)
-{
-	switch (index) {
-	case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN);
-	case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
-	case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
-	}
-	return -1;
-}
-
-static int get_vbus_detect_gpio(int index)
-{
-	switch (index) {
-	case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET);
-	}
-	return -1;
-}
-
-static void usb_phy_write(struct sunxi_usbc_hcd *sunxi_usbc, int addr,
-			  int data, int len)
-{
-	int j = 0, usbc_bit = 0;
-	void *dest = sunxi_usbc_get_io_base(0) + SUNXI_USB_CSR;
-
-	usbc_bit = 1 << (sunxi_usbc->id * 2);
-	for (j = 0; j < len; j++) {
-		/* set the bit address to be written */
-		clrbits_le32(dest, 0xff << 8);
-		setbits_le32(dest, (addr + j) << 8);
-
-		clrbits_le32(dest, usbc_bit);
-		/* set data bit */
-		if (data & 0x1)
-			setbits_le32(dest, 1 << 7);
-		else
-			clrbits_le32(dest, 1 << 7);
-
-		setbits_le32(dest, usbc_bit);
-
-		clrbits_le32(dest, usbc_bit);
-
-		data >>= 1;
-	}
-}
-
-static void sunxi_usb_phy_init(struct sunxi_usbc_hcd *sunxi_usbc)
-{
-	/* The following comments are machine
-	 * translated from Chinese, you have been warned!
-	 */
-
-	/* Regulation 45 ohms */
-	if (sunxi_usbc->id == 0)
-		usb_phy_write(sunxi_usbc, 0x0c, 0x01, 1);
-
-	/* adjust PHY's magnitude and rate */
-	usb_phy_write(sunxi_usbc, 0x20, 0x14, 5);
-
-	/* threshold adjustment disconnect */
-#if defined CONFIG_MACH_SUN4I || defined CONFIG_MACH_SUN6I
-	usb_phy_write(sunxi_usbc, 0x2a, 3, 2);
-#else
-	usb_phy_write(sunxi_usbc, 0x2a, 2, 2);
-#endif
-
-	return;
-}
-
-static void sunxi_usb_passby(struct sunxi_usbc_hcd *sunxi_usbc, int enable)
-{
-	unsigned long bits = 0;
-	void *addr = sunxi_usbc_get_io_base(sunxi_usbc->id) +
-		     SUNXI_USB_PMU_IRQ_ENABLE;
-
-	bits = SUNXI_EHCI_AHB_ICHR8_EN |
-		SUNXI_EHCI_AHB_INCR4_BURST_EN |
-		SUNXI_EHCI_AHB_INCRX_ALIGN_EN |
-		SUNXI_EHCI_ULPI_BYPASS_EN;
-
-	if (enable)
-		setbits_le32(addr, bits);
-	else
-		clrbits_le32(addr, bits);
-
-	return;
-}
-
-void sunxi_usbc_enable_squelch_detect(int index, int enable)
-{
-	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
-
-	usb_phy_write(sunxi_usbc, 0x3c, enable ? 0 : 2, 2);
-}
-
-int sunxi_usbc_request_resources(int index)
-{
-	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
-	int ret = 0;
-
-	sunxi_usbc->gpio_vbus = get_vbus_gpio(index);
-	if (sunxi_usbc->gpio_vbus != -1) {
-		ret |= gpio_request(sunxi_usbc->gpio_vbus, "usbc_vbus");
-		ret |= gpio_direction_output(sunxi_usbc->gpio_vbus, 0);
-	}
-
-	sunxi_usbc->gpio_vbus_det = get_vbus_detect_gpio(index);
-	if (sunxi_usbc->gpio_vbus_det != -1) {
-		ret |= gpio_request(sunxi_usbc->gpio_vbus_det, "usbc_vbus_det");
-		ret |= gpio_direction_input(sunxi_usbc->gpio_vbus_det);
-	}
-
-	return ret;
-}
-
-int sunxi_usbc_free_resources(int index)
-{
-	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
-	int ret = 0;
-
-	if (sunxi_usbc->gpio_vbus != -1)
-		ret |= gpio_free(sunxi_usbc->gpio_vbus);
-
-	if (sunxi_usbc->gpio_vbus_det != -1)
-		ret |= gpio_free(sunxi_usbc->gpio_vbus_det);
-
-	return ret;
-}
-
-void sunxi_usbc_enable(int index)
-{
-	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
-	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
-	/* enable common PHY only once */
-	if (enabled_hcd_count == 0)
-		setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
-
-	setbits_le32(&ccm->usb_clk_cfg, sunxi_usbc->usb_rst_mask);
-	setbits_le32(&ccm->ahb_gate0, sunxi_usbc->ahb_clk_mask);
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
-	setbits_le32(&ccm->ahb_reset0_cfg, sunxi_usbc->ahb_clk_mask);
-#endif
-
-	sunxi_usb_phy_init(sunxi_usbc);
-
-	if (sunxi_usbc->id != 0)
-		sunxi_usb_passby(sunxi_usbc, SUNXI_USB_PASSBY_EN);
-
-	enabled_hcd_count++;
-}
-
-void sunxi_usbc_disable(int index)
-{
-	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
-	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
-	if (sunxi_usbc->id != 0)
-		sunxi_usb_passby(sunxi_usbc, !SUNXI_USB_PASSBY_EN);
-
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
-	clrbits_le32(&ccm->ahb_reset0_cfg, sunxi_usbc->ahb_clk_mask);
-#endif
-	clrbits_le32(&ccm->ahb_gate0, sunxi_usbc->ahb_clk_mask);
-	clrbits_le32(&ccm->usb_clk_cfg, sunxi_usbc->usb_rst_mask);
-
-	/* disable common PHY only once, for the last enabled hcd */
-	if (enabled_hcd_count == 1)
-		clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
-
-	enabled_hcd_count--;
-}
-
-void sunxi_usbc_vbus_enable(int index)
-{
-	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
-
-	if (sunxi_usbc->gpio_vbus != -1)
-		gpio_set_value(sunxi_usbc->gpio_vbus, 1);
-}
-
-void sunxi_usbc_vbus_disable(int index)
-{
-	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
-
-	if (sunxi_usbc->gpio_vbus != -1)
-		gpio_set_value(sunxi_usbc->gpio_vbus, 0);
-}
-
-int sunxi_usbc_vbus_detect(int index)
-{
-	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
-	int err, retries = 3;
-
-	if (sunxi_usbc->gpio_vbus_det == -1) {
-		eprintf("Error: invalid vbus detection pin\n");
-		return -1;
-	}
-
-	err = gpio_get_value(sunxi_usbc->gpio_vbus_det);
-	/*
-	 * Vbus may have been provided by the board and just been turned of
-	 * some milliseconds ago on reset, what we're measuring then is a
-	 * residual charge on Vbus, sleep a bit and try again.
-	 */
-	while (err > 0 && retries--) {
-		mdelay(100);
-		err = gpio_get_value(sunxi_usbc->gpio_vbus_det);
-	}
-
-	return err;
-}