diff options
Diffstat (limited to 'arch/arm/cpu/armv8/fsl-lsch3')
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-lsch3/cpu.c | 62 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-lsch3/fdt.c | 28 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S | 132 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-lsch3/mp.c | 8 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-lsch3/mp.h | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-lsch3/speed.c | 16 |
6 files changed, 179 insertions, 68 deletions
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c index 47b947f44f..49974878b9 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c +++ b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c @@ -10,10 +10,10 @@ #include <asm/armv8/mmu.h> #include <asm/io.h> #include <asm/arch-fsl-lsch3/immap_lsch3.h> +#include <fsl-mc/fsl_mc.h> #include "cpu.h" #include "mp.h" #include "speed.h" -#include <fsl_mc.h> DECLARE_GLOBAL_DATA_PTR; @@ -150,7 +150,7 @@ static inline void final_mmu_setup(void) * set level 2 table 0 to cache-inhibit, covering 0 to 1GB */ section_l1t0 = 0; - section_l1t1 = BLOCK_SIZE_L0; + section_l1t1 = BLOCK_SIZE_L0 | PMD_SECT_OUTER_SHARE; section_l2 = 0; for (i = 0; i < 512; i++) { set_pgtable_section(level1_table_0, i, section_l1t0, @@ -168,10 +168,10 @@ static inline void final_mmu_setup(void) (u64)level2_table_0 | PMD_TYPE_TABLE; level1_table_0[2] = 0x80000000 | PMD_SECT_AF | PMD_TYPE_SECT | - PMD_ATTRINDX(MT_NORMAL); + PMD_SECT_OUTER_SHARE | PMD_ATTRINDX(MT_NORMAL); level1_table_0[3] = 0xc0000000 | PMD_SECT_AF | PMD_TYPE_SECT | - PMD_ATTRINDX(MT_NORMAL); + PMD_SECT_OUTER_SHARE | PMD_ATTRINDX(MT_NORMAL); /* Rewrite table to enable cache */ set_pgtable_section(level2_table_0, @@ -243,59 +243,6 @@ int arch_cpu_init(void) } /* - * flush_l3_cache - * Dickens L3 cache can be flushed by transitioning from FAM to SFONLY power - * state, by writing to HP-F P-state request register. - * Fixme: This function should moved to a common file if other SoCs also use - * the same Dickens. - */ -#define HNF0_PSTATE_REQ 0x04200010 -#define HNF1_PSTATE_REQ 0x04210010 -#define HNF2_PSTATE_REQ 0x04220010 -#define HNF3_PSTATE_REQ 0x04230010 -#define HNF4_PSTATE_REQ 0x04240010 -#define HNF5_PSTATE_REQ 0x04250010 -#define HNF6_PSTATE_REQ 0x04260010 -#define HNF7_PSTATE_REQ 0x04270010 -#define HNFPSTAT_MASK (0xFFFFFFFFFFFFFFFC) -#define HNFPSTAT_FAM 0x3 -#define HNFPSTAT_SFONLY 0x01 - -static void hnf_pstate_req(u64 *ptr, u64 state) -{ - int timeout = 1000; - out_le64(ptr, (in_le64(ptr) & HNFPSTAT_MASK) | (state & 0x3)); - ptr++; - /* checking if the transition is completed */ - while (timeout > 0) { - if (((in_le64(ptr) & 0x0c) >> 2) == (state & 0x3)) - break; - udelay(100); - timeout--; - } -} - -void flush_l3_cache(void) -{ - hnf_pstate_req((u64 *)HNF0_PSTATE_REQ, HNFPSTAT_SFONLY); - hnf_pstate_req((u64 *)HNF1_PSTATE_REQ, HNFPSTAT_SFONLY); - hnf_pstate_req((u64 *)HNF2_PSTATE_REQ, HNFPSTAT_SFONLY); - hnf_pstate_req((u64 *)HNF3_PSTATE_REQ, HNFPSTAT_SFONLY); - hnf_pstate_req((u64 *)HNF4_PSTATE_REQ, HNFPSTAT_SFONLY); - hnf_pstate_req((u64 *)HNF5_PSTATE_REQ, HNFPSTAT_SFONLY); - hnf_pstate_req((u64 *)HNF6_PSTATE_REQ, HNFPSTAT_SFONLY); - hnf_pstate_req((u64 *)HNF7_PSTATE_REQ, HNFPSTAT_SFONLY); - hnf_pstate_req((u64 *)HNF0_PSTATE_REQ, HNFPSTAT_FAM); - hnf_pstate_req((u64 *)HNF1_PSTATE_REQ, HNFPSTAT_FAM); - hnf_pstate_req((u64 *)HNF2_PSTATE_REQ, HNFPSTAT_FAM); - hnf_pstate_req((u64 *)HNF3_PSTATE_REQ, HNFPSTAT_FAM); - hnf_pstate_req((u64 *)HNF4_PSTATE_REQ, HNFPSTAT_FAM); - hnf_pstate_req((u64 *)HNF5_PSTATE_REQ, HNFPSTAT_FAM); - hnf_pstate_req((u64 *)HNF6_PSTATE_REQ, HNFPSTAT_FAM); - hnf_pstate_req((u64 *)HNF7_PSTATE_REQ, HNFPSTAT_FAM); -} - -/* * This function is called from lib/board.c. * It recreates MMU table in main memory. MMU and d-cache are enabled earlier. * There is no need to disable d-cache for this operation. @@ -420,6 +367,7 @@ int print_cpuinfo(void) printf("\n Bus: %-4s MHz ", strmhz(buf, sysinfo.freq_systembus)); printf("DDR: %-4s MHz", strmhz(buf, sysinfo.freq_ddrbus)); + printf(" DP-DDR: %-4s MHz", strmhz(buf, sysinfo.freq_ddrbus2)); puts("\n"); return 0; diff --git a/arch/arm/cpu/armv8/fsl-lsch3/fdt.c b/arch/arm/cpu/armv8/fsl-lsch3/fdt.c index e392eb9149..7eb9b6aa4b 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/fdt.c +++ b/arch/arm/cpu/armv8/fsl-lsch3/fdt.c @@ -16,7 +16,7 @@ void ft_fixup_cpu(void *blob) __maybe_unused u64 spin_tbl_addr = (u64)get_spin_tbl_addr(); fdt32_t *reg; int addr_cells; - u64 val; + u64 val, core_id; size_t *boot_code_size = &(__secondary_boot_code_size); off = fdt_path_offset(blob, "/cpus"); @@ -29,15 +29,20 @@ void ft_fixup_cpu(void *blob) off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); while (off != -FDT_ERR_NOTFOUND) { reg = (fdt32_t *)fdt_getprop(blob, off, "reg", 0); + core_id = of_read_number(reg, addr_cells); if (reg) { - val = spin_tbl_addr; - val += id_to_core(of_read_number(reg, addr_cells)) - * SPIN_TABLE_ELEM_SIZE; - val = cpu_to_fdt64(val); - fdt_setprop_string(blob, off, "enable-method", - "spin-table"); - fdt_setprop(blob, off, "cpu-release-addr", - &val, sizeof(val)); + if (core_id == 0 || (is_core_online(core_id))) { + val = spin_tbl_addr; + val += id_to_core(core_id) * + SPIN_TABLE_ELEM_SIZE; + val = cpu_to_fdt64(val); + fdt_setprop_string(blob, off, "enable-method", + "spin-table"); + fdt_setprop(blob, off, "cpu-release-addr", + &val, sizeof(val)); + } else { + debug("skipping offline core\n"); + } } else { puts("Warning: found cpu node without reg property\n"); } @@ -55,4 +60,9 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CONFIG_MP ft_fixup_cpu(blob); #endif + +#ifdef CONFIG_SYS_NS16550 + do_fixup_by_compat_u32(blob, "ns16550", + "clock-frequency", CONFIG_SYS_NS16550_CLK, 1); +#endif } diff --git a/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S index 2a88aab283..886576ef99 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S +++ b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S @@ -42,10 +42,142 @@ ENTRY(lowlevel_init) ldr x0, =secondary_boot_func blr x0 2: + +#ifdef CONFIG_FSL_TZPC_BP147 + /* Set Non Secure access for all devices protected via TZPC */ + ldr x1, =TZPCDECPROT_0_SET_BASE /* Decode Protection-0 Set Reg */ + orr w0, w0, #1 << 3 /* DCFG_RESET is accessible from NS world */ + str w0, [x1] + + isb + dsb sy +#endif + +#ifdef CONFIG_FSL_TZASC_400 + /* Set TZASC so that: + * a. We use only Region0 whose global secure write/read is EN + * b. We use only Region0 whose NSAID write/read is EN + * + * NOTE: As per the CCSR map doc, TZASC 3 and TZASC 4 are just + * placeholders. + */ + ldr x1, =TZASC_GATE_KEEPER(0) + ldr x0, [x1] /* Filter 0 Gate Keeper Register */ + orr x0, x0, #1 << 0 /* Set open_request for Filter 0 */ + str x0, [x1] + + ldr x1, =TZASC_GATE_KEEPER(1) + ldr x0, [x1] /* Filter 0 Gate Keeper Register */ + orr x0, x0, #1 << 0 /* Set open_request for Filter 0 */ + str x0, [x1] + + ldr x1, =TZASC_REGION_ATTRIBUTES_0(0) + ldr x0, [x1] /* Region-0 Attributes Register */ + orr x0, x0, #1 << 31 /* Set Sec global write en, Bit[31] */ + orr x0, x0, #1 << 30 /* Set Sec global read en, Bit[30] */ + str x0, [x1] + + ldr x1, =TZASC_REGION_ATTRIBUTES_0(1) + ldr x0, [x1] /* Region-1 Attributes Register */ + orr x0, x0, #1 << 31 /* Set Sec global write en, Bit[31] */ + orr x0, x0, #1 << 30 /* Set Sec global read en, Bit[30] */ + str x0, [x1] + + ldr x1, =TZASC_REGION_ID_ACCESS_0(0) + ldr w0, [x1] /* Region-0 Access Register */ + mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */ + str w0, [x1] + + ldr x1, =TZASC_REGION_ID_ACCESS_0(1) + ldr w0, [x1] /* Region-1 Attributes Register */ + mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */ + str w0, [x1] + + isb + dsb sy +#endif mov lr, x29 /* Restore LR */ ret ENDPROC(lowlevel_init) +hnf_pstate_poll: + /* x0 has the desired status, return 0 for success, 1 for timeout + * clobber x1, x2, x3, x4, x6, x7 + */ + mov x1, x0 + mov x7, #0 /* flag for timeout */ + mrs x3, cntpct_el0 /* read timer */ + add x3, x3, #1200 /* timeout after 100 microseconds */ + mov x0, #0x18 + movk x0, #0x420, lsl #16 /* HNF0_PSTATE_STATUS */ + mov w6, #8 /* HN-F node count */ +1: + ldr x2, [x0] + cmp x2, x1 /* check status */ + b.eq 2f + mrs x4, cntpct_el0 + cmp x4, x3 + b.ls 1b + mov x7, #1 /* timeout */ + b 3f +2: + add x0, x0, #0x10000 /* move to next node */ + subs w6, w6, #1 + cbnz w6, 1b +3: + mov x0, x7 + ret + +hnf_set_pstate: + /* x0 has the desired state, clobber x1, x2, x6 */ + mov x1, x0 + /* power state to SFONLY */ + mov w6, #8 /* HN-F node count */ + mov x0, #0x10 + movk x0, #0x420, lsl #16 /* HNF0_PSTATE_REQ */ +1: /* set pstate to sfonly */ + ldr x2, [x0] + and x2, x2, #0xfffffffffffffffc /* & HNFPSTAT_MASK */ + orr x2, x2, x1 + str x2, [x0] + add x0, x0, #0x10000 /* move to next node */ + subs w6, w6, #1 + cbnz w6, 1b + + ret + +ENTRY(__asm_flush_l3_cache) + /* + * Return status in x0 + * success 0 + * tmeout 1 for setting SFONLY, 2 for FAM, 3 for both + */ + mov x29, lr + mov x8, #0 + + dsb sy + mov x0, #0x1 /* HNFPSTAT_SFONLY */ + bl hnf_set_pstate + + mov x0, #0x4 /* SFONLY status */ + bl hnf_pstate_poll + cbz x0, 1f + mov x8, #1 /* timeout */ +1: + dsb sy + mov x0, #0x3 /* HNFPSTAT_FAM */ + bl hnf_set_pstate + + mov x0, #0xc /* FAM status */ + bl hnf_pstate_poll + cbz x0, 1f + add x8, x8, #0x2 +1: + mov x0, x8 + mov lr, x29 + ret +ENDPROC(__asm_flush_l3_cache) + /* Keep literals not used by the secondary boot code outside it */ .ltorg diff --git a/arch/arm/cpu/armv8/fsl-lsch3/mp.c b/arch/arm/cpu/armv8/fsl-lsch3/mp.c index 94998bf37b..ce9c0c1bdb 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/mp.c +++ b/arch/arm/cpu/armv8/fsl-lsch3/mp.c @@ -83,6 +83,14 @@ int is_core_valid(unsigned int core) return !!((1 << core) & cpu_mask()); } +int is_core_online(u64 cpu_id) +{ + u64 *table; + int pos = id_to_core(cpu_id); + table = (u64 *)get_spin_tbl_addr() + pos * WORDS_PER_SPIN_TABLE_ENTRY; + return table[SPIN_TABLE_ELEM_STATUS_IDX] == 1; +} + int cpu_reset(int nr) { puts("Feature is not implemented.\n"); diff --git a/arch/arm/cpu/armv8/fsl-lsch3/mp.h b/arch/arm/cpu/armv8/fsl-lsch3/mp.h index 06ac0bcf36..66144d6101 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/mp.h +++ b/arch/arm/cpu/armv8/fsl-lsch3/mp.h @@ -32,5 +32,6 @@ int fsl_lsch3_wake_seconday_cores(void); void *get_spin_tbl_addr(void); phys_addr_t determine_mp_bootpg(void); void secondary_boot_func(void); +int is_core_online(u64 cpu_id); #endif #endif /* _FSL_CH3_MP_H */ diff --git a/arch/arm/cpu/armv8/fsl-lsch3/speed.c b/arch/arm/cpu/armv8/fsl-lsch3/speed.c index dc4a34bce5..72cd999c5f 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/speed.c +++ b/arch/arm/cpu/armv8/fsl-lsch3/speed.c @@ -77,8 +77,10 @@ void get_sys_info(struct sys_info *sys_info) sys_info->freq_systembus = sysclk; #ifdef CONFIG_DDR_CLK_FREQ sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ; + sys_info->freq_ddrbus2 = CONFIG_DDR_CLK_FREQ; #else sys_info->freq_ddrbus = sysclk; + sys_info->freq_ddrbus2 = sysclk; #endif sys_info->freq_systembus *= (in_le32(&gur->rcwsr[0]) >> @@ -87,6 +89,9 @@ void get_sys_info(struct sys_info *sys_info) sys_info->freq_ddrbus *= (in_le32(&gur->rcwsr[0]) >> FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT) & FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK; + sys_info->freq_ddrbus2 *= (in_le32(&gur->rcwsr[0]) >> + FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT) & + FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK; for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) { /* @@ -129,7 +134,7 @@ int get_clocks(void) gd->cpu_clk = sys_info.freq_processor[0]; gd->bus_clk = sys_info.freq_systembus; gd->mem_clk = sys_info.freq_ddrbus; - + gd->arch.mem2_clk = sys_info.freq_ddrbus2; #if defined(CONFIG_FSL_ESDHC) gd->arch.sdhc_clk = gd->bus_clk / 2; #endif /* defined(CONFIG_FSL_ESDHC) */ @@ -156,11 +161,18 @@ ulong get_bus_freq(ulong dummy) * get_ddr_freq * return ddr bus freq in Hz *********************************************/ -ulong get_ddr_freq(ulong dummy) +ulong get_ddr_freq(ulong ctrl_num) { if (!gd->mem_clk) get_clocks(); + /* + * DDR controller 0 & 1 are on memory complex 0 + * DDR controler 2 is on memory complext 1 + */ + if (ctrl_num >= 2) + return gd->arch.mem2_clk; + return gd->mem_clk; } |