diff options
Diffstat (limited to 'arch/arm/cpu/tegra20-common/warmboot_avp.c')
| -rw-r--r-- | arch/arm/cpu/tegra20-common/warmboot_avp.c | 250 |
1 files changed, 250 insertions, 0 deletions
diff --git a/arch/arm/cpu/tegra20-common/warmboot_avp.c b/arch/arm/cpu/tegra20-common/warmboot_avp.c new file mode 100644 index 0000000000..cd01908a46 --- /dev/null +++ b/arch/arm/cpu/tegra20-common/warmboot_avp.c @@ -0,0 +1,250 @@ +/* + * (C) Copyright 2010 - 2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/ap20.h> +#include <asm/arch/clk_rst.h> +#include <asm/arch/clock.h> +#include <asm/arch/flow.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/pmc.h> +#include <asm/arch/tegra20.h> +#include <asm/arch/warmboot.h> +#include "warmboot_avp.h" + +#define DEBUG_RESET_CORESIGHT + +void wb_start(void) +{ + struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; + struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE; + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + union osc_ctrl_reg osc_ctrl; + union pllx_base_reg pllx_base; + union pllx_misc_reg pllx_misc; + union scratch3_reg scratch3; + u32 reg; + + /* enable JTAG & TBE */ + writel(CONFIG_CTL_TBE | CONFIG_CTL_JTAG, &pmt->pmt_cfg_ctl); + + /* Are we running where we're supposed to be? */ + asm volatile ( + "adr %0, wb_start;" /* reg: wb_start address */ + : "=r"(reg) /* output */ + /* no input, no clobber list */ + ); + + if (reg != AP20_WB_RUN_ADDRESS) + goto do_reset; + + /* Are we running with AVP? */ + if (readl(NV_PA_PG_UP_BASE + PG_UP_TAG_0) != PG_UP_TAG_AVP) + goto do_reset; + +#ifdef DEBUG_RESET_CORESIGHT + /* Assert CoreSight reset */ + reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_U]); + reg |= SWR_CSITE_RST; + writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_U]); +#endif + + /* TODO: Set the drive strength - maybe make this a board parameter? */ + osc_ctrl.word = readl(&clkrst->crc_osc_ctrl); + osc_ctrl.xofs = 4; + osc_ctrl.xoe = 1; + writel(osc_ctrl.word, &clkrst->crc_osc_ctrl); + + /* Power up the CPU complex if necessary */ + if (!(readl(&pmc->pmc_pwrgate_status) & PWRGATE_STATUS_CPU)) { + reg = PWRGATE_TOGGLE_PARTID_CPU | PWRGATE_TOGGLE_START; + writel(reg, &pmc->pmc_pwrgate_toggle); + while (!(readl(&pmc->pmc_pwrgate_status) & PWRGATE_STATUS_CPU)) + ; + } + + /* Remove the I/O clamps from the CPU power partition. */ + reg = readl(&pmc->pmc_remove_clamping); + reg |= CPU_CLMP; + writel(reg, &pmc->pmc_remove_clamping); + + reg = EVENT_ZERO_VAL_20 | EVENT_MSEC | EVENT_MODE_STOP; + writel(reg, &flow->halt_cop_events); + + /* Assert CPU complex reset */ + reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_L]); + reg |= CPU_RST; + writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_L]); + + /* Hold both CPUs in reset */ + reg = CPU_CMPLX_CPURESET0 | CPU_CMPLX_CPURESET1 | CPU_CMPLX_DERESET0 | + CPU_CMPLX_DERESET1 | CPU_CMPLX_DBGRESET0 | CPU_CMPLX_DBGRESET1; + writel(reg, &clkrst->crc_cpu_cmplx_set); + + /* Halt CPU1 at the flow controller for uni-processor configurations */ + writel(EVENT_MODE_STOP, &flow->halt_cpu1_events); + + /* + * Set the CPU reset vector. SCRATCH41 contains the physical + * address of the CPU-side restoration code. + */ + reg = readl(&pmc->pmc_scratch41); + writel(reg, EXCEP_VECTOR_CPU_RESET_VECTOR); + + /* Select CPU complex clock source */ + writel(CCLK_PLLP_BURST_POLICY, &clkrst->crc_cclk_brst_pol); + + /* Start the CPU0 clock and stop the CPU1 clock */ + reg = CPU_CMPLX_CPU_BRIDGE_CLKDIV_4 | CPU_CMPLX_CPU0_CLK_STP_RUN | + CPU_CMPLX_CPU1_CLK_STP_STOP; + writel(reg, &clkrst->crc_clk_cpu_cmplx); + + /* Enable the CPU complex clock */ + reg = readl(&clkrst->crc_clk_out_enb[TEGRA_DEV_L]); + reg |= CLK_ENB_CPU; + writel(reg, &clkrst->crc_clk_out_enb[TEGRA_DEV_L]); + + /* Make sure the resets were held for at least 2 microseconds */ + reg = readl(TIMER_USEC_CNTR); + while (readl(TIMER_USEC_CNTR) <= (reg + 2)) + ; + +#ifdef DEBUG_RESET_CORESIGHT + /* + * De-assert CoreSight reset. + * NOTE: We're leaving the CoreSight clock on the oscillator for + * now. It will be restored to its original clock source + * when the CPU-side restoration code runs. + */ + reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_U]); + reg &= ~SWR_CSITE_RST; + writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_U]); +#endif + + /* Unlock the CPU CoreSight interfaces */ + reg = 0xC5ACCE55; + writel(reg, CSITE_CPU_DBG0_LAR); + writel(reg, CSITE_CPU_DBG1_LAR); + + /* + * Sample the microsecond timestamp again. This is the time we must + * use when returning from LP0 for PLL stabilization delays. + */ + reg = readl(TIMER_USEC_CNTR); + writel(reg, &pmc->pmc_scratch1); + + pllx_base.word = 0; + pllx_misc.word = 0; + scratch3.word = readl(&pmc->pmc_scratch3); + + /* Get the OSC. For 19.2 MHz, use 19 to make the calculations easier */ + reg = (readl(TIMER_USEC_CFG) & USEC_CFG_DIVISOR_MASK) + 1; + + /* + * According to the TRM, for 19.2MHz OSC, the USEC_DIVISOR is 0x5f, and + * USEC_DIVIDEND is 0x04. So, if USEC_DIVISOR > 26, OSC is 19.2 MHz. + * + * reg is used to calculate the pllx freq, which is used to determine if + * to set dccon or not. + */ + if (reg > 26) + reg = 19; + + /* PLLX_BASE.PLLX_DIVM */ + if (scratch3.pllx_base_divm == reg) + reg = 0; + else + reg = 1; + + /* PLLX_BASE.PLLX_DIVN */ + pllx_base.divn = scratch3.pllx_base_divn; + reg = scratch3.pllx_base_divn << reg; + + /* PLLX_BASE.PLLX_DIVP */ + pllx_base.divp = scratch3.pllx_base_divp; + reg = reg >> scratch3.pllx_base_divp; + + pllx_base.bypass = 1; + + /* PLLX_MISC_DCCON must be set for pllx frequency > 600 MHz. */ + if (reg > 600) + pllx_misc.dccon = 1; + + /* PLLX_MISC_LFCON */ + pllx_misc.lfcon = scratch3.pllx_misc_lfcon; + + /* PLLX_MISC_CPCON */ + pllx_misc.cpcon = scratch3.pllx_misc_cpcon; + + writel(pllx_misc.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_misc); + writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base); + + pllx_base.enable = 1; + writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base); + pllx_base.bypass = 0; + writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base); + + writel(0, flow->halt_cpu_events); + + reg = CPU_CMPLX_CPURESET0 | CPU_CMPLX_DBGRESET0 | CPU_CMPLX_DERESET0; + writel(reg, &clkrst->crc_cpu_cmplx_clr); + + reg = PLLM_OUT1_RSTN_RESET_DISABLE | PLLM_OUT1_CLKEN_ENABLE | + PLLM_OUT1_RATIO_VAL_8; + writel(reg, &clkrst->crc_pll[CLOCK_ID_MEMORY].pll_out); + + reg = SCLK_SWAKE_FIQ_SRC_PLLM_OUT1 | SCLK_SWAKE_IRQ_SRC_PLLM_OUT1 | + SCLK_SWAKE_RUN_SRC_PLLM_OUT1 | SCLK_SWAKE_IDLE_SRC_PLLM_OUT1 | + SCLK_SYS_STATE_IDLE; + writel(reg, &clkrst->crc_sclk_brst_pol); + + /* avp_resume: no return after the write */ + reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_L]); + reg &= ~CPU_RST; + writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_L]); + + /* avp_halt: */ +avp_halt: + reg = EVENT_MODE_STOP | EVENT_JTAG; + writel(reg, flow->halt_cop_events); + goto avp_halt; + +do_reset: + /* + * Execution comes here if something goes wrong. The chip is reset and + * a cold boot is performed. + */ + writel(SWR_TRIG_SYS_RST, &clkrst->crc_rst_dev[TEGRA_DEV_L]); + goto do_reset; +} + +/* + * wb_end() is a dummy function, and must be directly following wb_start(), + * and is used to calculate the size of wb_start(). + */ +void wb_end(void) +{ +} |