diff options
Diffstat (limited to 'arch/arm/cpu')
68 files changed, 1483 insertions, 3637 deletions
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index b228ed6a2e..ad22489e1a 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -56,6 +56,5 @@ obj-$(CONFIG_SOCFPGA) += socfpga/ obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/ obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-$(CONFIG_U8500) += u8500/ -obj-$(CONFIG_ARCH_UNIPHIER) += uniphier/ obj-$(CONFIG_VF610) += vf610/ obj-$(CONFIG_ZYNQ) += zynq/ diff --git a/arch/arm/cpu/armv7/exynos/Makefile b/arch/arm/cpu/armv7/exynos/Makefile index e207bd6af0..8542f896cf 100644 --- a/arch/arm/cpu/armv7/exynos/Makefile +++ b/arch/arm/cpu/armv7/exynos/Makefile @@ -7,6 +7,8 @@ obj-y += clock.o power.o soc.o system.o pinmux.o tzpc.o +obj-$(CONFIG_EXYNOS5420) += sec_boot.o + ifdef CONFIG_SPL_BUILD obj-$(CONFIG_EXYNOS5) += clock_init_exynos5.o obj-$(CONFIG_EXYNOS5) += dmc_common.o dmc_init_ddr3.o diff --git a/arch/arm/cpu/armv7/exynos/common_setup.h b/arch/arm/cpu/armv7/exynos/common_setup.h index e6318c0366..5235abb808 100644 --- a/arch/arm/cpu/armv7/exynos/common_setup.h +++ b/arch/arm/cpu/armv7/exynos/common_setup.h @@ -23,6 +23,8 @@ * MA 02111-1307 USA */ +#include <asm/arch/system.h> + #define DMC_OFFSET 0x10000 /* @@ -43,3 +45,63 @@ void system_clock_init(void); int do_lowlevel_init(void); void sdelay(unsigned long); + +enum l2_cache_params { + CACHE_DATA_RAM_LATENCY_2_CYCLES = (2 << 0), + CACHE_DATA_RAM_LATENCY_3_CYCLES = (3 << 0), + CACHE_DISABLE_CLEAN_EVICT = (1 << 3), + CACHE_DATA_RAM_SETUP = (1 << 5), + CACHE_TAG_RAM_LATENCY_2_CYCLES = (2 << 6), + CACHE_TAG_RAM_LATENCY_3_CYCLES = (3 << 6), + CACHE_ENABLE_HAZARD_DETECT = (1 << 7), + CACHE_TAG_RAM_SETUP = (1 << 9), + CACHE_ECC_AND_PARITY = (1 << 21), + CACHE_ENABLE_FORCE_L2_LOGIC = (1 << 27) +}; + + +#ifndef CONFIG_SYS_L2CACHE_OFF +/* + * Configure L2CTLR to get timings that keep us from hanging/crashing. + * + * Must be inline here since low_power_start() is called without a + * stack (!). + */ +static inline void configure_l2_ctlr(void) +{ + uint32_t val; + + mrc_l2_ctlr(val); + + val |= CACHE_TAG_RAM_SETUP | + CACHE_DATA_RAM_SETUP | + CACHE_TAG_RAM_LATENCY_2_CYCLES | + CACHE_DATA_RAM_LATENCY_2_CYCLES; + + if (proid_is_exynos5420() || proid_is_exynos5800()) { + val |= CACHE_ECC_AND_PARITY | + CACHE_TAG_RAM_LATENCY_3_CYCLES | + CACHE_DATA_RAM_LATENCY_3_CYCLES; + } + + mcr_l2_ctlr(val); +} + +/* + * Configure L2ACTLR. + * + * Must be inline here since low_power_start() is called without a + * stack (!). + */ +static inline void configure_l2_actlr(void) +{ + uint32_t val; + + if (proid_is_exynos5420() || proid_is_exynos5800()) { + mrc_l2_aux_ctlr(val); + val |= CACHE_ENABLE_FORCE_L2_LOGIC | + CACHE_DISABLE_CLEAN_EVICT; + mcr_l2_aux_ctlr(val); + } +} +#endif diff --git a/arch/arm/cpu/armv7/exynos/exynos5_setup.h b/arch/arm/cpu/armv7/exynos/exynos5_setup.h index 2eea48a0cc..9073f50f6b 100644 --- a/arch/arm/cpu/armv7/exynos/exynos5_setup.h +++ b/arch/arm/cpu/armv7/exynos/exynos5_setup.h @@ -700,6 +700,9 @@ #define CLK_DIV_CPERI1_VAL NOT_AVAILABLE #else + +#define CPU_CONFIG_STATUS_OFFSET 0x80 +#define CPU_RST_FLAG_VAL 0xFCBA0D10 #define PAD_RETENTION_DRAM_COREBLK_VAL 0x10000000 /* APLL_CON1 */ diff --git a/arch/arm/cpu/armv7/exynos/lowlevel_init.c b/arch/arm/cpu/armv7/exynos/lowlevel_init.c index 83e1dcfc1e..120aaf8b96 100644 --- a/arch/arm/cpu/armv7/exynos/lowlevel_init.c +++ b/arch/arm/cpu/armv7/exynos/lowlevel_init.c @@ -31,7 +31,10 @@ #include <asm/arch/tzpc.h> #include <asm/arch/periph.h> #include <asm/arch/pinmux.h> +#include <asm/arch/system.h> +#include <asm/armv7.h> #include "common_setup.h" +#include "exynos5_setup.h" /* These are the things we can do during low-level init */ enum { @@ -42,6 +45,128 @@ enum { DO_POWER = 1 << 4, }; +#ifdef CONFIG_EXYNOS5420 +/* + * Power up secondary CPUs. + */ +static void secondary_cpu_start(void) +{ + v7_enable_smp(EXYNOS5420_INFORM_BASE); + svc32_mode_en(); + branch_bx(CONFIG_EXYNOS_RELOCATE_CODE_BASE); +} + +/* + * This is the entry point of hotplug-in and + * cluster switching. + */ +static void low_power_start(void) +{ + uint32_t val, reg_val; + + reg_val = readl(EXYNOS5420_SPARE_BASE); + if (reg_val != CPU_RST_FLAG_VAL) { + writel(0x0, CONFIG_LOWPOWER_FLAG); + branch_bx(0x0); + } + + reg_val = readl(CONFIG_PHY_IRAM_BASE + 0x4); + if (reg_val != (uint32_t)&low_power_start) { + /* Store jump address as low_power_start if not present */ + writel((uint32_t)&low_power_start, CONFIG_PHY_IRAM_BASE + 0x4); + dsb(); + sev(); + } + + /* Set the CPU to SVC32 mode */ + svc32_mode_en(); + +#ifndef CONFIG_SYS_L2CACHE_OFF + /* Read MIDR for Primary Part Number */ + mrc_midr(val); + val = (val >> 4); + val &= 0xf; + + if (val == 0xf) { + configure_l2_ctlr(); + configure_l2_actlr(); + v7_enable_l2_hazard_detect(); + } +#endif + + /* Invalidate L1 & TLB */ + val = 0x0; + mcr_tlb(val); + mcr_icache(val); + + /* Disable MMU stuff and caches */ + mrc_sctlr(val); + + val &= ~((0x2 << 12) | 0x7); + val |= ((0x1 << 12) | (0x8 << 8) | 0x2); + mcr_sctlr(val); + + /* CPU state is hotplug or reset */ + secondary_cpu_start(); + + /* Core should not enter into WFI here */ + wfi(); +} + +/* + * Pointer to this function is stored in iRam which is used + * for jump and power down of a specific core. + */ +static void power_down_core(void) +{ + uint32_t tmp, core_id, core_config; + + /* Get the unique core id */ + /* + * Multiprocessor Affinity Register + * [11:8] Cluster ID + * [1:0] CPU ID + */ + mrc_mpafr(core_id); + tmp = core_id & 0x3; + core_id = (core_id >> 6) & ~3; + core_id |= tmp; + core_id &= 0x3f; + + /* Set the status of the core to low */ + core_config = (core_id * CPU_CONFIG_STATUS_OFFSET); + core_config += EXYNOS5420_CPU_CONFIG_BASE; + writel(0x0, core_config); + + /* Core enter WFI */ + wfi(); +} + +/* + * Configurations for secondary cores are inapt at this stage. + * Reconfigure secondary cores. Shutdown and change the status + * of all cores except the primary core. + */ +static void secondary_cores_configure(void) +{ + /* Clear secondary boot iRAM base */ + writel(0x0, (CONFIG_EXYNOS_RELOCATE_CODE_BASE + 0x1C)); + + /* set lowpower flag and address */ + writel(CPU_RST_FLAG_VAL, CONFIG_LOWPOWER_FLAG); + writel((uint32_t)&low_power_start, CONFIG_LOWPOWER_ADDR); + writel(CPU_RST_FLAG_VAL, EXYNOS5420_SPARE_BASE); + /* Store jump address for power down */ + writel((uint32_t)&power_down_core, CONFIG_PHY_IRAM_BASE + 0x4); + + /* Need all core power down check */ + dsb(); + sev(); +} + +extern void relocate_wait_code(void); +#endif + int do_lowlevel_init(void) { uint32_t reset_status; @@ -49,6 +174,28 @@ int do_lowlevel_init(void) arch_cpu_init(); +#ifndef CONFIG_SYS_L2CACHE_OFF + /* + * Init L2 cache parameters here for use by boot and resume + * + * These are here instead of in v7_outer_cache_enable() so that the + * L2 cache settings get properly set even at resume time or if we're + * running U-Boot with the cache off. The kernel still needs us to + * set these for it. + */ + configure_l2_ctlr(); + configure_l2_actlr(); + dsb(); + isb(); +#endif + +#ifdef CONFIG_EXYNOS5420 + relocate_wait_code(); + + /* Reconfigure secondary cores */ + secondary_cores_configure(); +#endif + reset_status = get_reset_status(); switch (reset_status) { diff --git a/arch/arm/cpu/armv7/exynos/sec_boot.S b/arch/arm/cpu/armv7/exynos/sec_boot.S new file mode 100644 index 0000000000..dfc3455929 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/sec_boot.S @@ -0,0 +1,128 @@ +/* + * Copyright (C) 2013 Samsung Electronics + * Akshay Saraswat <akshay.s@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <asm/arch/cpu.h> + + .globl relocate_wait_code +relocate_wait_code: + adr r0, code_base @ r0: source address (start) + adr r1, code_end @ r1: source address (end) + ldr r2, =0x02073000 @ r2: target address +1: + ldmia r0!, {r3-r6} + stmia r2!, {r3-r6} + cmp r0, r1 + blt 1b + b code_end + .ltorg +/* + * Secondary core waits here until Primary wake it up. + * Below code is copied to CONFIG_EXYNOS_RELOCATE_CODE_BASE. + * This is a workaround code which is supposed to act as a + * substitute/supplement to the iROM code. + * + * This workaround code is relocated to the address 0x02073000 + * because that comes out to be the last 4KB of the iRAM + * (Base Address - 0x02020000, Limit Address - 0x020740000). + * + * U-boot and kernel are aware of this code and flags by the simple + * fact that we are implementing a workaround in the last 4KB + * of the iRAM and we have already defined these flag and address + * values in both kernel and U-boot for our use. + */ +code_base: + b 1f +/* + * These addresses are being used as flags in u-boot and kernel. + * + * Jump address for resume and flag to check for resume/reset: + * Resume address - 0x2073008 + * Resume flag - 0x207300C + * + * Jump address for cluster switching: + * Switch address - 0x2073018 + * + * Jump address for core hotplug: + * Hotplug address - 0x207301C + * + * Jump address for C2 state (Reserved for future not being used right now): + * C2 address - 0x2073024 + * + * Managed per core status for the active cluster: + * CPU0 state - 0x2073028 + * CPU1 state - 0x207302C + * CPU2 state - 0x2073030 + * CPU3 state - 0x2073034 + * + * Managed per core GIC status for the active cluster: + * CPU0 gic state - 0x2073038 + * CPU1 gic state - 0x207303C + * CPU2 gic state - 0x2073040 + * CPU3 gic state - 0x2073044 + * + * Logic of the code: + * Step-1: Read current CPU status. + * Step-2: If it's a resume then continue, else jump to step 4. + * Step-3: Clear inform1 PMU register and jump to inform0 value. + * Step-4: If it's a switch, C2 or reset, get the hotplug address. + * Step-5: If address is not available, enter WFE. + * Step-6: If address is available, jump to that address. + */ + nop @ for backward compatibility + .word 0x0 @ REG0: RESUME_ADDR + .word 0x0 @ REG1: RESUME_FLAG + .word 0x0 @ REG2 + .word 0x0 @ REG3 +_switch_addr: + .word 0x0 @ REG4: SWITCH_ADDR +_hotplug_addr: + .word 0x0 @ REG5: CPU1_BOOT_REG + .word 0x0 @ REG6 +_c2_addr: + .word 0x0 @ REG7: REG_C2_ADDR +_cpu_state: + .word 0x1 @ CPU0_STATE : RESET + .word 0x2 @ CPU1_STATE : SECONDARY RESET + .word 0x2 @ CPU2_STATE : SECONDARY RESET + .word 0x2 @ CPU3_STATE : SECONDARY RESET +_gic_state: + .word 0x0 @ CPU0 - GICD_IGROUPR0 + .word 0x0 @ CPU1 - GICD_IGROUPR0 + .word 0x0 @ CPU2 - GICD_IGROUPR0 + .word 0x0 @ CPU3 - GICD_IGROUPR0 +1: + adr r0, _cpu_state + mrc p15, 0, r7, c0, c0, 5 @ read MPIDR + and r7, r7, #0xf @ r7 = cpu id +/* Read the current cpu state */ + ldr r10, [r0, r7, lsl #2] +svc_entry: + tst r10, #(1 << 4) + adrne r0, _switch_addr + bne wait_for_addr +/* Clear INFORM1 */ + ldr r0, =(0x10040000 + 0x804) + ldr r1, [r0] + cmp r1, #0x0 + movne r1, #0x0 + strne r1, [r0] +/* Get INFORM0 */ + ldrne r1, =(0x10040000 + 0x800) + ldrne pc, [r1] + tst r10, #(1 << 0) + ldrne pc, =0x23e00000 + adr r0, _hotplug_addr +wait_for_addr: + ldr r1, [r0] + cmp r1, #0x0 + bxne r1 + wfe + b wait_for_addr + .ltorg +code_end: + mov pc, lr diff --git a/arch/arm/cpu/armv7/exynos/soc.c b/arch/arm/cpu/armv7/exynos/soc.c index 8c7d7d893f..0f116b141a 100644 --- a/arch/arm/cpu/armv7/exynos/soc.c +++ b/arch/arm/cpu/armv7/exynos/soc.c @@ -9,13 +9,6 @@ #include <asm/io.h> #include <asm/system.h> -enum l2_cache_params { - CACHE_TAG_RAM_SETUP = (1 << 9), - CACHE_DATA_RAM_SETUP = (1 << 5), - CACHE_TAG_RAM_LATENCY = (2 << 6), - CACHE_DATA_RAM_LATENCY = (2 << 0) -}; - void reset_cpu(ulong addr) { writel(0x1, samsung_get_base_swreset()); @@ -28,31 +21,3 @@ void enable_caches(void) dcache_enable(); } #endif - -#ifndef CONFIG_SYS_L2CACHE_OFF -/* - * Set L2 cache parameters - */ -static void exynos5_set_l2cache_params(void) -{ - unsigned int val = 0; - - asm volatile("mrc p15, 1, %0, c9, c0, 2\n" : "=r"(val)); - - val |= CACHE_TAG_RAM_SETUP | - CACHE_DATA_RAM_SETUP | - CACHE_TAG_RAM_LATENCY | - CACHE_DATA_RAM_LATENCY; - - asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val)); -} - -/* - * Sets L2 cache related parameters before enabling data cache - */ -void v7_outer_cache_enable(void) -{ - if (cpu_is_exynos5()) - exynos5_set_l2cache_params(); -} -#endif diff --git a/arch/arm/cpu/armv7/rmobile/Kconfig b/arch/arm/cpu/armv7/rmobile/Kconfig index 35866508a3..2b333a3d46 100644 --- a/arch/arm/cpu/armv7/rmobile/Kconfig +++ b/arch/arm/cpu/armv7/rmobile/Kconfig @@ -24,6 +24,9 @@ config TARGET_ALT config TARGET_SILK bool "Silk board" +config TARGET_PORTER + bool "Porter board" + endchoice config SYS_SOC @@ -31,7 +34,7 @@ config SYS_SOC config RMOBILE_EXTRAM_BOOT bool "Enable boot from RAM" - depends on TARGET_ALT || TARGET_KOELSCH || TARGET_LAGER || TARGET_SILK + depends on TARGET_ALT || TARGET_KOELSCH || TARGET_LAGER || TARGET_PORTER || TARGET_SILK default n source "board/atmark-techno/armadillo-800eva/Kconfig" @@ -41,5 +44,6 @@ source "board/renesas/lager/Kconfig" source "board/kmc/kzm9g/Kconfig" source "board/renesas/alt/Kconfig" source "board/renesas/silk/Kconfig" +source "board/renesas/porter/Kconfig" endif diff --git a/arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c b/arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c index 1259062a64..580aba39e1 100644 --- a/arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c +++ b/arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c @@ -135,7 +135,91 @@ enum { FN_VI0_DATA0_VI0_B0, FN_ATACS10_N, FN_AVB_RXD2, FN_MII_RXD2, - /* IPSR8 - IPSR16 */ + /* IPSR8 */ + FN_VI0_DATA1_VI0_B1, FN_ATARD0_N, FN_AVB_RXD3, + FN_MII_RXD3, FN_VI0_DATA2_VI0_B2, FN_ATAWR0_N, + FN_AVB_RXD4, FN_VI0_DATA3_VI0_B3, FN_ATADIR0_N, + FN_AVB_RXD5, FN_VI0_DATA4_VI0_B4, FN_ATAG0_N, + FN_AVB_RXD6, FN_VI0_DATA5_VI0_B5, FN_EX_WAIT1, + FN_AVB_RXD7, FN_VI0_DATA6_VI0_B6, FN_AVB_RX_ER, + FN_MII_RX_ER, FN_VI0_DATA7_VI0_B7, FN_AVB_RX_CLK, + FN_MII_RX_CLK, FN_VI1_CLK, FN_AVB_RX_DV, + FN_MII_RX_DV, FN_VI1_DATA0_VI1_B0, FN_SCIFA1_SCK_D, + FN_AVB_CRS, FN_MII_CRS, FN_VI1_DATA1_VI1_B1, + FN_SCIFA1_RXD_D, FN_AVB_MDC, FN_MII_MDC, + FN_VI1_DATA2_VI1_B2, FN_SCIFA1_TXD_D, FN_AVB_MDIO, + FN_MII_MDIO, FN_VI1_DATA3_VI1_B3, FN_SCIFA1_CTS_N_D, + FN_AVB_GTX_CLK, FN_VI1_DATA4_VI1_B4, FN_SCIFA1_RTS_N_D, + FN_AVB_MAGIC, FN_MII_MAGIC, FN_VI1_DATA5_VI1_B5, + FN_AVB_PHY_INT, FN_VI1_DATA6_VI1_B6, FN_AVB_GTXREFCLK, + FN_SD0_CLK, FN_VI1_DATA0_VI1_B0_B, FN_SD0_CMD, + FN_SCIFB1_SCK_B, FN_VI1_DATA1_VI1_B1_B, + + /* IPSR9 */ + FN_SD0_DAT0, FN_SCIFB1_RXD_B, FN_VI1_DATA2_VI1_B2_B, + FN_SD0_DAT1, FN_SCIFB1_TXD_B, FN_VI1_DATA3_VI1_B3_B, + FN_SD0_DAT2, FN_SCIFB1_CTS_N_B, FN_VI1_DATA4_VI1_B4_B, + FN_SD0_DAT3, FN_SCIFB1_RTS_N_B, FN_VI1_DATA5_VI1_B5_B, + FN_SD0_CD, FN_MMC0_D6, FN_TS_SDEN0_B, FN_USB0_EXTP, + FN_GLO_SCLK, FN_VI1_DATA6_VI1_B6_B, FN_SCL1_B, + FN_SCL1_CIS_B, FN_VI2_DATA6_VI2_B6_B, FN_SD0_WP, + FN_MMC0_D7, FN_TS_SPSYNC0_B, FN_USB0_IDIN, + FN_GLO_SDATA, FN_VI1_DATA7_VI1_B7_B, FN_SDA1_B, + FN_SDA1_CIS_B, FN_VI2_DATA7_VI2_B7_B, FN_SD1_CLK, + FN_AVB_TX_EN, FN_MII_TX_EN, FN_SD1_CMD, + FN_AVB_TX_ER, FN_MII_TX_ER, FN_SCIFB0_SCK_B, + FN_SD1_DAT0, FN_AVB_TX_CLK, FN_MII_TX_CLK, + FN_SCIFB0_RXD_B, FN_SD1_DAT1, FN_AVB_LINK, + FN_MII_LINK, FN_SCIFB0_TXD_B, FN_SD1_DAT2, + FN_AVB_COL, FN_MII_COL, FN_SCIFB0_CTS_N_B, + FN_SD1_DAT3, FN_AVB_RXD0, FN_MII_RXD0, + FN_SCIFB0_RTS_N_B, FN_SD1_CD, FN_MMC1_D6, + FN_TS_SDEN1, FN_USB1_EXTP, FN_GLO_SS, FN_VI0_CLK_B, + FN_SCL2_D, FN_SCL2_CIS_D, FN_SIM0_CLK_B, + FN_VI3_CLK_B, + + /* IPSR10 */ + FN_SD1_WP, FN_MMC1_D7, FN_TS_SPSYNC1, FN_USB1_IDIN, + FN_GLO_RFON, FN_VI1_CLK_B, FN_SDA2_D, FN_SDA2_CIS_D, + FN_SIM0_D_B, FN_SD2_CLK, FN_MMC0_CLK, FN_SIM0_CLK, + FN_VI0_DATA0_VI0_B0_B, FN_TS_SDEN0_C, FN_GLO_SCLK_B, + FN_VI3_DATA0_B, FN_SD2_CMD, FN_MMC0_CMD, FN_SIM0_D, + FN_VI0_DATA1_VI0_B1_B, FN_SCIFB1_SCK_E, FN_SCK1_D, + FN_TS_SPSYNC0_C, FN_GLO_SDATA_B, FN_VI3_DATA1_B, + FN_SD2_DAT0, FN_MMC0_D0, FN_FMCLK_B, + FN_VI0_DATA2_VI0_B2_B, FN_SCIFB1_RXD_E, FN_RX1_D, + FN_TS_SDAT0_C, FN_GLO_SS_B, FN_VI3_DATA2_B, + FN_SD2_DAT1, FN_MMC0_D1, FN_FMIN_B, FN_RDS_DATA, + FN_VI0_DATA3_VI0_B3_B, FN_SCIFB1_TXD_E, FN_TX1_D, + FN_TS_SCK0_C, FN_GLO_RFON_B, FN_VI3_DATA3_B, + FN_SD2_DAT2, FN_MMC0_D2, FN_BPFCLK_B, FN_RDS_CLK, + FN_VI0_DATA4_VI0_B4_B, FN_HRX0_D, FN_TS_SDEN1_B, + FN_GLO_Q0_B, FN_VI3_DATA4_B, FN_SD2_DAT3, + FN_MMC0_D3, FN_SIM0_RST, FN_VI0_DATA5_VI0_B5_B, + FN_HTX0_D, FN_TS_SPSYNC1_B, FN_GLO_Q1_B, + FN_VI3_DATA5_B, FN_SD2_CD, FN_MMC0_D4, + FN_TS_SDAT0_B, FN_USB2_EXTP, FN_GLO_I0, + FN_VI0_DATA6_VI0_B6_B, FN_HCTS0_N_D, FN_TS_SDAT1_B, + FN_GLO_I0_B, FN_VI3_DATA6_B, + + /* IPSR11 */ + FN_SD2_WP, FN_MMC0_D5, FN_TS_SCK0_B, FN_USB2_IDIN, + FN_GLO_I1, FN_VI0_DATA7_VI0_B7_B, FN_HRTS0_N_D, + FN_TS_SCK1_B, FN_GLO_I1_B, FN_VI3_DATA7_B, + FN_SD3_CLK, FN_MMC1_CLK, FN_SD3_CMD, FN_MMC1_CMD, + FN_MTS_N, FN_SD3_DAT0, FN_MMC1_D0, FN_STM_N, + FN_SD3_DAT1, FN_MMC1_D1, FN_MDATA, FN_SD3_DAT2, + FN_MMC1_D2, FN_SDATA, FN_SD3_DAT3, FN_MMC1_D3, + FN_SCKZ, FN_SD3_CD, FN_MMC1_D4, FN_TS_SDAT1, + FN_VSP, FN_GLO_Q0, FN_SIM0_RST_B, FN_SD3_WP, + FN_MMC1_D5, FN_TS_SCK1, FN_GLO_Q1, FN_FMIN_C, + FN_RDS_DATA_B, FN_FMIN_E, FN_RDS_DATA_D, FN_FMIN_F, + FN_RDS_DATA_E, FN_MLB_CLK, FN_SCL2_B, FN_SCL2_CIS_B, + FN_MLB_SIG, FN_SCIFB1_RXD_D, FN_RX1_C, FN_SDA2_B, + FN_SDA2_CIS_B, FN_MLB_DAT, FN_SPV_EVEN, + FN_SCIFB1_TXD_D, FN_TX1_C, FN_BPFCLK_C, + FN_RDS_CLK_B, FN_SSI_SCK0129, FN_CAN_CLK_B, + FN_MOUT0, FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, FN_SEL_SCIF1_3, FN_SEL_SCIF1_4, @@ -189,11 +273,110 @@ enum { FN_SEL_I2C2_0, FN_SEL_I2C2_1, FN_SEL_I2C2_2, FN_SEL_I2C2_3, FN_SEL_I2C2_4, FN_SEL_I2C1_0, FN_SEL_I2C1_1, FN_SEL_I2C1_2, - PINMUX_FUNCTION_END, PINMUX_MARK_BEGIN, + VI1_DATA7_VI1_B7_MARK, + + USB0_PWEN_MARK, USB0_OVC_VBUS_MARK, + USB2_PWEN_MARK, USB2_OVC_MARK, AVS1_MARK, AVS2_MARK, + DU_DOTCLKIN0_MARK, DU_DOTCLKIN2_MARK, + + D0_MARK, MSIOF3_SCK_B_MARK, VI3_DATA0_MARK, VI0_G4_MARK, VI0_G4_B_MARK, + D1_MARK, MSIOF3_SYNC_B_MARK, VI3_DATA1_MARK, VI0_G5_MARK, + VI0_G5_B_MARK, D2_MARK, MSIOF3_RXD_B_MARK, VI3_DATA2_MARK, + VI0_G6_MARK, VI0_G6_B_MARK, D3_MARK, MSIOF3_TXD_B_MARK, + VI3_DATA3_MARK, VI0_G7_MARK, VI0_G7_B_MARK, D4_MARK, + SCIFB1_RXD_F_MARK, SCIFB0_RXD_C_MARK, VI3_DATA4_MARK, + VI0_R0_MARK, VI0_R0_B_MARK, RX0_B_MARK, D5_MARK, + SCIFB1_TXD_F_MARK, SCIFB0_TXD_C_MARK, VI3_DATA5_MARK, + VI0_R1_MARK, VI0_R1_B_MARK, TX0_B_MARK, D6_MARK, + SCL2_C_MARK, VI3_DATA6_MARK, VI0_R2_MARK, VI0_R2_B_MARK, + SCL2_CIS_C_MARK, D7_MARK, AD_DI_B_MARK, SDA2_C_MARK, + VI3_DATA7_MARK, VI0_R3_MARK, VI0_R3_B_MARK, SDA2_CIS_C_MARK, + D8_MARK, SCIFA1_SCK_C_MARK, AVB_TXD0_MARK, MII_TXD0_MARK, + VI0_G0_MARK, VI0_G0_B_MARK, VI2_DATA0_VI2_B0_MARK, + + D9_MARK, SCIFA1_RXD_C_MARK, AVB_TXD1_MARK, MII_TXD1_MARK, + VI0_G1_MARK, VI0_G1_B_MARK, VI2_DATA1_VI2_B1_MARK, D10_MARK, + SCIFA1_TXD_C_MARK, AVB_TXD2_MARK, MII_TXD2_MARK, + VI0_G2_MARK, VI0_G2_B_MARK, VI2_DATA2_VI2_B2_MARK, D11_MARK, + SCIFA1_CTS_N_C_MARK, AVB_TXD3_MARK, MII_TXD3_MARK, + VI0_G3_MARK, VI0_G3_B_MARK, VI2_DATA3_VI2_B3_MARK, + D12_MARK, SCIFA1_RTS_N_C_MARK, AVB_TXD4_MARK, + VI0_HSYNC_N_MARK, VI0_HSYNC_N_B_MARK, VI2_DATA4_VI2_B4_MARK, + D13_MARK, AVB_TXD5_MARK, VI0_VSYNC_N_MARK, + VI0_VSYNC_N_B_MARK, VI2_DATA5_VI2_B5_MARK, D14_MARK, + SCIFB1_RXD_C_MARK, AVB_TXD6_MARK, RX1_B_MARK, + VI0_CLKENB_MARK, VI0_CLKENB_B_MARK, VI2_DATA6_VI2_B6_MARK, + D15_MARK, SCIFB1_TXD_C_MARK, AVB_TXD7_MARK, TX1_B_MARK, + VI0_FIELD_MARK, VI0_FIELD_B_MARK, VI2_DATA7_VI2_B7_MARK, + A0_MARK, PWM3_MARK, A1_MARK, PWM4_MARK, + + A2_MARK, PWM5_MARK, MSIOF1_SS1_B_MARK, A3_MARK, + PWM6_MARK, MSIOF1_SS2_B_MARK, A4_MARK, MSIOF1_TXD_B_MARK, + TPU0TO0_MARK, A5_MARK, SCIFA1_TXD_B_MARK, TPU0TO1_MARK, + A6_MARK, SCIFA1_RTS_N_B_MARK, TPU0TO2_MARK, A7_MARK, + SCIFA1_SCK_B_MARK, AUDIO_CLKOUT_B_MARK, TPU0TO3_MARK, + A8_MARK, SCIFA1_RXD_B_MARK, SSI_SCK5_B_MARK, VI0_R4_MARK, + VI0_R4_B_MARK, SCIFB2_RXD_C_MARK, VI2_DATA0_VI2_B0_B_MARK, + A9_MARK, SCIFA1_CTS_N_B_MARK, SSI_WS5_B_MARK, VI0_R5_MARK, + VI0_R5_B_MARK, SCIFB2_TXD_C_MARK, VI2_DATA1_VI2_B1_B_MARK, + A10_MARK, SSI_SDATA5_B_MARK, MSIOF2_SYNC_MARK, VI0_R6_MARK, + VI0_R6_B_MARK, VI2_DATA2_VI2_B2_B_MARK, + + A11_MARK, SCIFB2_CTS_N_B_MARK, MSIOF2_SCK_MARK, VI1_R0_MARK, + VI1_R0_B_MARK, VI2_G0_MARK, VI2_DATA3_VI2_B3_B_MARK, + A12_MARK, SCIFB2_RXD_B_MARK, MSIOF2_TXD_MARK, VI1_R1_MARK, + VI1_R1_B_MARK, VI2_G1_MARK, VI2_DATA4_VI2_B4_B_MARK, + A13_MARK, SCIFB2_RTS_N_B_MARK, EX_WAIT2_MARK, + MSIOF2_RXD_MARK, VI1_R2_MARK, VI1_R2_B_MARK, VI2_G2_MARK, + VI2_DATA5_VI2_B5_B_MARK, A14_MARK, SCIFB2_TXD_B_MARK, + ATACS11_N_MARK, MSIOF2_SS1_MARK, A15_MARK, SCIFB2_SCK_B_MARK, + ATARD1_N_MARK, MSIOF2_SS2_MARK, A16_MARK, ATAWR1_N_MARK, + A17_MARK, AD_DO_B_MARK, ATADIR1_N_MARK, A18_MARK, + AD_CLK_B_MARK, ATAG1_N_MARK, A19_MARK, AD_NCS_N_B_MARK, + ATACS01_N_MARK, EX_WAIT0_B_MARK, A20_MARK, SPCLK_MARK, + VI1_R3_MARK, VI1_R3_B_MARK, VI2_G4_MARK, + + A21_MARK, MOSI_IO0_MARK, VI1_R4_MARK, VI1_R4_B_MARK, VI2_G5_MARK, + A22_MARK, MISO_IO1_MARK, VI1_R5_MARK, VI1_R5_B_MARK, + VI2_G6_MARK, A23_MARK, IO2_MARK, VI1_G7_MARK, + VI1_G7_B_MARK, VI2_G7_MARK, A24_MARK, IO3_MARK, + VI1_R7_MARK, VI1_R7_B_MARK, VI2_CLKENB_MARK, + VI2_CLKENB_B_MARK, A25_MARK, SSL_MARK, VI1_G6_MARK, + VI1_G6_B_MARK, VI2_FIELD_MARK, VI2_FIELD_B_MARK, CS0_N_MARK, + VI1_R6_MARK, VI1_R6_B_MARK, VI2_G3_MARK, MSIOF0_SS2_B_MARK, + CS1_N_A26_MARK, SPEEDIN_MARK, VI0_R7_MARK, VI0_R7_B_MARK, + VI2_CLK_MARK, VI2_CLK_B_MARK, EX_CS0_N_MARK, HRX1_B_MARK, + VI1_G5_MARK, VI1_G5_B_MARK, VI2_R0_MARK, HTX0_B_MARK, + MSIOF0_SS1_B_MARK, EX_CS1_N_MARK, GPS_CLK_MARK, + HCTS1_N_B_MARK, VI1_FIELD_MARK, VI1_FIELD_B_MARK, + VI2_R1_MARK, EX_CS2_N_MARK, GPS_SIGN_MARK, HRTS1_N_B_MARK, + VI3_CLKENB_MARK, VI1_G0_MARK, VI1_G0_B_MARK, VI2_R2_MARK, + + EX_CS3_N_MARK, GPS_MAG_MARK, VI3_FIELD_MARK, + VI1_G1_MARK, VI1_G1_B_MARK, VI2_R3_MARK, + EX_CS4_N_MARK, MSIOF1_SCK_B_MARK, VI3_HSYNC_N_MARK, + VI2_HSYNC_N_MARK, SCL1_MARK, VI2_HSYNC_N_B_MARK, + INTC_EN0_N_MARK, SCL1_CIS_MARK, EX_CS5_N_MARK, CAN0_RX_MARK, + MSIOF1_RXD_B_MARK, VI3_VSYNC_N_MARK, VI1_G2_MARK, + VI1_G2_B_MARK, VI2_R4_MARK, SDA1_MARK, INTC_EN1_N_MARK, + SDA1_CIS_MARK, BS_N_MARK, IETX_MARK, HTX1_B_MARK, + CAN1_TX_MARK, DRACK0_MARK, IETX_C_MARK, RD_N_MARK, + CAN0_TX_MARK, SCIFA0_SCK_B_MARK, RD_WR_N_MARK, VI1_G3_MARK, + VI1_G3_B_MARK, VI2_R5_MARK, SCIFA0_RXD_B_MARK, + INTC_IRQ4_N_MARK, WE0_N_MARK, IECLK_MARK, CAN_CLK_MARK, + VI2_VSYNC_N_MARK, SCIFA0_TXD_B_MARK, VI2_VSYNC_N_B_MARK, + WE1_N_MARK, IERX_MARK, CAN1_RX_MARK, VI1_G4_MARK, + VI1_G4_B_MARK, VI2_R6_MARK, SCIFA0_CTS_N_B_MARK, + IERX_C_MARK, EX_WAIT0_MARK, IRQ3_MARK, INTC_IRQ3_N_MARK, + VI3_CLK_MARK, SCIFA0_RTS_N_B_MARK, HRX0_B_MARK, + MSIOF0_SCK_B_MARK, DREQ0_N_MARK, VI1_HSYNC_N_MARK, + VI1_HSYNC_N_B_MARK, VI2_R7_MARK, SSI_SCK78_C_MARK, + SSI_WS78_B_MARK, + DACK0_MARK, IRQ0_MARK, INTC_IRQ0_N_MARK, SSI_SCK6_B_MARK, VI1_VSYNC_N_MARK, VI1_VSYNC_N_B_MARK, SSI_WS78_C_MARK, DREQ1_N_MARK, VI1_CLKENB_MARK, VI1_CLKENB_B_MARK, @@ -235,12 +418,189 @@ enum { VI0_DATA0_VI0_B0_MARK, ATACS10_N_MARK, AVB_RXD2_MARK, MII_RXD2_MARK, + VI0_DATA1_VI0_B1_MARK, ATARD0_N_MARK, AVB_RXD3_MARK, + MII_RXD3_MARK, VI0_DATA2_VI0_B2_MARK, ATAWR0_N_MARK, + AVB_RXD4_MARK, VI0_DATA3_VI0_B3_MARK, ATADIR0_N_MARK, + AVB_RXD5_MARK, VI0_DATA4_VI0_B4_MARK, ATAG0_N_MARK, + AVB_RXD6_MARK, VI0_DATA5_VI0_B5_MARK, EX_WAIT1_MARK, + AVB_RXD7_MARK, VI0_DATA6_VI0_B6_MARK, AVB_RX_ER_MARK, + MII_RX_ER_MARK, VI0_DATA7_VI0_B7_MARK, AVB_RX_CLK_MARK, + MII_RX_CLK_MARK, VI1_CLK_MARK, AVB_RX_DV_MARK, + MII_RX_DV_MARK, VI1_DATA0_VI1_B0_MARK, SCIFA1_SCK_D_MARK, + AVB_CRS_MARK, MII_CRS_MARK, VI1_DATA1_VI1_B1_MARK, + SCIFA1_RXD_D_MARK, AVB_MDC_MARK, MII_MDC_MARK, + VI1_DATA2_VI1_B2_MARK, SCIFA1_TXD_D_MARK, AVB_MDIO_MARK, + MII_MDIO_MARK, VI1_DATA3_VI1_B3_MARK, SCIFA1_CTS_N_D_MARK, + AVB_GTX_CLK_MARK, VI1_DATA4_VI1_B4_MARK, SCIFA1_RTS_N_D_MARK, + AVB_MAGIC_MARK, MII_MAGIC_MARK, VI1_DATA5_VI1_B5_MARK, + AVB_PHY_INT_MARK, VI1_DATA6_VI1_B6_MARK, AVB_GTXREFCLK_MARK, + SD0_CLK_MARK, VI1_DATA0_VI1_B0_B_MARK, SD0_CMD_MARK, + SCIFB1_SCK_B_MARK, VI1_DATA1_VI1_B1_B_MARK, + + SD0_DAT0_MARK, SCIFB1_RXD_B_MARK, VI1_DATA2_VI1_B2_B_MARK, + SD0_DAT1_MARK, SCIFB1_TXD_B_MARK, VI1_DATA3_VI1_B3_B_MARK, + SD0_DAT2_MARK, SCIFB1_CTS_N_B_MARK, VI1_DATA4_VI1_B4_B_MARK, + SD0_DAT3_MARK, SCIFB1_RTS_N_B_MARK, VI1_DATA5_VI1_B5_B_MARK, + SD0_CD_MARK, MMC0_D6_MARK, TS_SDEN0_B_MARK, USB0_EXTP_MARK, + GLO_SCLK_MARK, VI1_DATA6_VI1_B6_B_MARK, SCL1_B_MARK, + SCL1_CIS_B_MARK, VI2_DATA6_VI2_B6_B_MARK, SD0_WP_MARK, + MMC0_D7_MARK, TS_SPSYNC0_B_MARK, USB0_IDIN_MARK, + GLO_SDATA_MARK, VI1_DATA7_VI1_B7_B_MARK, SDA1_B_MARK, + SDA1_CIS_B_MARK, VI2_DATA7_VI2_B7_B_MARK, SD1_CLK_MARK, + AVB_TX_EN_MARK, MII_TX_EN_MARK, SD1_CMD_MARK, + AVB_TX_ER_MARK, MII_TX_ER_MARK, SCIFB0_SCK_B_MARK, + SD1_DAT0_MARK, AVB_TX_CLK_MARK, MII_TX_CLK_MARK, + SCIFB0_RXD_B_MARK, SD1_DAT1_MARK, AVB_LINK_MARK, + MII_LINK_MARK, SCIFB0_TXD_B_MARK, SD1_DAT2_MARK, + AVB_COL_MARK, MII_COL_MARK, SCIFB0_CTS_N_B_MARK, + SD1_DAT3_MARK, AVB_RXD0_MARK, MII_RXD0_MARK, + SCIFB0_RTS_N_B_MARK, SD1_CD_MARK, MMC1_D6_MARK, + TS_SDEN1_MARK, USB1_EXTP_MARK, GLO_SS_MARK, VI0_CLK_B_MARK, + SCL2_D_MARK, SCL2_CIS_D_MARK, SIM0_CLK_B_MARK, + VI3_CLK_B_MARK, + + SD1_WP_MARK, MMC1_D7_MARK, TS_SPSYNC1_MARK, USB1_IDIN_MARK, + GLO_RFON_MARK, VI1_CLK_B_MARK, SDA2_D_MARK, SDA2_CIS_D_MARK, + SIM0_D_B_MARK, SD2_CLK_MARK, MMC0_CLK_MARK, SIM0_CLK_MARK, + VI0_DATA0_VI0_B0_B_MARK, TS_SDEN0_C_MARK, GLO_SCLK_B_MARK, + VI3_DATA0_B_MARK, SD2_CMD_MARK, MMC0_CMD_MARK, SIM0_D_MARK, + VI0_DATA1_VI0_B1_B_MARK, SCIFB1_SCK_E_MARK, SCK1_D_MARK, + TS_SPSYNC0_C_MARK, GLO_SDATA_B_MARK, VI3_DATA1_B_MARK, + SD2_DAT0_MARK, MMC0_D0_MARK, FMCLK_B_MARK, + VI0_DATA2_VI0_B2_B_MARK, SCIFB1_RXD_E_MARK, RX1_D_MARK, + TS_SDAT0_C_MARK, GLO_SS_B_MARK, VI3_DATA2_B_MARK, + SD2_DAT1_MARK, MMC0_D1_MARK, FMIN_B_MARK, RDS_DATA_MARK, + VI0_DATA3_VI0_B3_B_MARK, SCIFB1_TXD_E_MARK, TX1_D_MARK, + TS_SCK0_C_MARK, GLO_RFON_B_MARK, VI3_DATA3_B_MARK, + SD2_DAT2_MARK, MMC0_D2_MARK, BPFCLK_B_MARK, RDS_CLK_MARK, + VI0_DATA4_VI0_B4_B_MARK, HRX0_D_MARK, TS_SDEN1_B_MARK, + GLO_Q0_B_MARK, VI3_DATA4_B_MARK, SD2_DAT3_MARK, + MMC0_D3_MARK, SIM0_RST_MARK, VI0_DATA5_VI0_B5_B_MARK, + HTX0_D_MARK, TS_SPSYNC1_B_MARK, GLO_Q1_B_MARK, + VI3_DATA5_B_MARK, SD2_CD_MARK, MMC0_D4_MARK, + TS_SDAT0_B_MARK, USB2_EXTP_MARK, GLO_I0_MARK, + VI0_DATA6_VI0_B6_B_MARK, HCTS0_N_D_MARK, TS_SDAT1_B_MARK, + GLO_I0_B_MARK, VI3_DATA6_B_MARK, + + SD2_WP_MARK, MMC0_D5_MARK, TS_SCK0_B_MARK, USB2_IDIN_MARK, + GLO_I1_MARK, VI0_DATA7_VI0_B7_B_MARK, HRTS0_N_D_MARK, + TS_SCK1_B_MARK, GLO_I1_B_MARK, VI3_DATA7_B_MARK, + SD3_CLK_MARK, MMC1_CLK_MARK, SD3_CMD_MARK, MMC1_CMD_MARK, + MTS_N_MARK, SD3_DAT0_MARK, MMC1_D0_MARK, STM_N_MARK, + SD3_DAT1_MARK, MMC1_D1_MARK, MDATA_MARK, SD3_DAT2_MARK, + MMC1_D2_MARK, SDATA_MARK, SD3_DAT3_MARK, MMC1_D3_MARK, + SCKZ_MARK, SD3_CD_MARK, MMC1_D4_MARK, TS_SDAT1_MARK, + VSP_MARK, GLO_Q0_MARK, SIM0_RST_B_MARK, SD3_WP_MARK, + MMC1_D5_MARK, TS_SCK1_MARK, GLO_Q1_MARK, FMIN_C_MARK, + RDS_DATA_B_MARK, FMIN_E_MARK, RDS_DATA_D_MARK, FMIN_F_MARK, + RDS_DATA_E_MARK, MLB_CLK_MARK, SCL2_B_MARK, SCL2_CIS_B_MARK, + MLB_SIG_MARK, SCIFB1_RXD_D_MARK, RX1_C_MARK, SDA2_B_MARK, + SDA2_CIS_B_MARK, MLB_DAT_MARK, SPV_EVEN_MARK, + SCIFB1_TXD_D_MARK, TX1_C_MARK, BPFCLK_C_MARK, + RDS_CLK_B_MARK, SSI_SCK0129_MARK, CAN_CLK_B_MARK, + MOUT0_MARK, + + SSI_WS0129_MARK, CAN0_TX_B_MARK, MOUT1_MARK, + SSI_SDATA0_MARK, CAN0_RX_B_MARK, MOUT2_MARK, + SSI_SDATA1_MARK, CAN1_TX_B_MARK, MOUT5_MARK, + SSI_SDATA2_MARK, CAN1_RX_B_MARK, SSI_SCK1_MARK, MOUT6_MARK, + SSI_SCK34_MARK, STP_OPWM_0_MARK, SCIFB0_SCK_MARK, + MSIOF1_SCK_MARK, CAN_DEBUG_HW_TRIGGER_MARK, SSI_WS34_MARK, + STP_IVCXO27_0_MARK, SCIFB0_RXD_MARK, MSIOF1_SYNC_MARK, + CAN_STEP0_MARK, SSI_SDATA3_MARK, STP_ISCLK_0_MARK, + SCIFB0_TXD_MARK, MSIOF1_SS1_MARK, CAN_TXCLK_MARK, + SSI_SCK4_MARK, STP_ISD_0_MARK, SCIFB0_CTS_N_MARK, + MSIOF1_SS2_MARK, SSI_SCK5_C_MARK, CAN_DEBUGOUT0_MARK, + SSI_WS4_MARK, STP_ISEN_0_MARK, SCIFB0_RTS_N_MARK, + MSIOF1_TXD_MARK, SSI_WS5_C_MARK, CAN_DEBUGOUT1_MARK, + SSI_SDATA4_MARK, STP_ISSYNC_0_MARK, MSIOF1_RXD_MARK, + CAN_DEBUGOUT2_MARK, SSI_SCK5_MARK, SCIFB1_SCK_MARK, + IERX_B_MARK, DU2_EXHSYNC_DU2_HSYNC_MARK, QSTH_QHS_MARK, + CAN_DEBUGOUT3_MARK, SSI_WS5_MARK, SCIFB1_RXD_MARK, + IECLK_B_MARK, DU2_EXVSYNC_DU2_VSYNC_MARK, QSTB_QHE_MARK, + CAN_DEBUGOUT4_MARK, + + SSI_SDATA5_MARK, SCIFB1_TXD_MARK, IETX_B_MARK, DU2_DR2_MARK, + LCDOUT2_MARK, CAN_DEBUGOUT5_MARK, SSI_SCK6_MARK, + SCIFB1_CTS_N_MARK, BPFCLK_D_MARK, RDS_CLK_C_MARK, + DU2_DR3_MARK, LCDOUT3_MARK, CAN_DEBUGOUT6_MARK, + BPFCLK_F_MARK, RDS_CLK_E_MARK, SSI_WS6_MARK, + SCIFB1_RTS_N_MARK, CAN0_TX_D_MARK, DU2_DR4_MARK, + LCDOUT4_MARK, CAN_DEBUGOUT7_MARK, SSI_SDATA6_MARK, + FMIN_D_MARK, RDS_DATA_C_MARK, DU2_DR5_MARK, LCDOUT5_MARK, + CAN_DEBUGOUT8_MARK, SSI_SCK78_MARK, STP_IVCXO27_1_MARK, + SCK1_MARK, SCIFA1_SCK_MARK, DU2_DR6_MARK, LCDOUT6_MARK, + CAN_DEBUGOUT9_MARK, SSI_WS78_MARK, STP_ISCLK_1_MARK, + SCIFB2_SCK_MARK, SCIFA2_CTS_N_MARK, DU2_DR7_MARK, + LCDOUT7_MARK, CAN_DEBUGOUT10_MARK, SSI_SDATA7_MARK, + STP_ISD_1_MARK, SCIFB2_RXD_MARK, SCIFA2_RTS_N_MARK, + TCLK2_MARK, QSTVA_QVS_MARK, CAN_DEBUGOUT11_MARK, + BPFCLK_E_MARK, RDS_CLK_D_MARK, SSI_SDATA7_B_MARK, + FMIN_G_MARK, RDS_DATA_F_MARK, SSI_SDATA8_MARK, + STP_ISEN_1_MARK, SCIFB2_TXD_MARK, CAN0_TX_C_MARK, + CAN_DEBUGOUT12_MARK, SSI_SDATA8_B_MARK, SSI_SDATA9_MARK, + STP_ISSYNC_1_MARK, SCIFB2_CTS_N_MARK, SSI_WS1_MARK, + SSI_SDATA5_C_MARK, CAN_DEBUGOUT13_MARK, AUDIO_CLKA_MARK, + SCIFB2_RTS_N_MARK, CAN_DEBUGOUT14_MARK, + + AUDIO_CLKB_MARK, SCIF_CLK_MARK, CAN0_RX_D_MARK, + DVC_MUTE_MARK, CAN0_RX_C_MARK, CAN_DEBUGOUT15_MARK, + REMOCON_MARK, SCIFA0_SCK_MARK, HSCK1_MARK, SCK0_MARK, + MSIOF3_SS2_MARK, DU2_DG2_MARK, LCDOUT10_MARK, SDA1_C_MARK, + SDA1_CIS_C_MARK, SCIFA0_RXD_MARK, HRX1_MARK, RX0_MARK, + DU2_DR0_MARK, LCDOUT0_MARK, SCIFA0_TXD_MARK, HTX1_MARK, + TX0_MARK, DU2_DR1_MARK, LCDOUT1_MARK, SCIFA0_CTS_N_MARK, + HCTS1_N_MARK, CTS0_N_MARK, MSIOF3_SYNC_MARK, DU2_DG3_MARK, + LCDOUT11_MARK, PWM0_B_MARK, SCL1_C_MARK, SCL1_CIS_C_MARK, + SCIFA0_RTS_N_MARK, HRTS1_N_MARK, RTS0_N_TANS_MARK, + MSIOF3_SS1_MARK, DU2_DG0_MARK, LCDOUT8_MARK, PWM1_B_MARK, + SCIFA1_RXD_MARK, AD_DI_MARK, RX1_MARK, + DU2_EXODDF_DU2_ODDF_DISP_CDE_MARK, QCPV_QDE_MARK, + SCIFA1_TXD_MARK, AD_DO_MARK, TX1_MARK, DU2_DG1_MARK, + LCDOUT9_MARK, SCIFA1_CTS_N_MARK, AD_CLK_MARK, + CTS1_N_MARK, MSIOF3_RXD_MARK, DU0_DOTCLKOUT_MARK, QCLK_MARK, + SCIFA1_RTS_N_MARK, AD_NCS_N_MARK, RTS1_N_TANS_MARK, + MSIOF3_TXD_MARK, DU1_DOTCLKOUT_MARK, QSTVB_QVE_MARK, + HRTS0_N_C_MARK, + + SCIFA2_SCK_MARK, FMCLK_MARK, MSIOF3_SCK_MARK, DU2_DG7_MARK, + LCDOUT15_MARK, SCIF_CLK_B_MARK, SCIFA2_RXD_MARK, FMIN_MARK, + DU2_DB0_MARK, LCDOUT16_MARK, SCL2_MARK, SCL2_CIS_MARK, + SCIFA2_TXD_MARK, BPFCLK_MARK, DU2_DB1_MARK, LCDOUT17_MARK, + SDA2_MARK, SDA2_CIS_MARK, HSCK0_MARK, TS_SDEN0_MARK, + DU2_DG4_MARK, LCDOUT12_MARK, HCTS0_N_C_MARK, HRX0_MARK, + DU2_DB2_MARK, LCDOUT18_MARK, HTX0_MARK, DU2_DB3_MARK, + LCDOUT19_MARK, HCTS0_N_MARK, SSI_SCK9_MARK, DU2_DB4_MARK, + LCDOUT20_MARK, HRTS0_N_MARK, SSI_WS9_MARK, DU2_DB5_MARK, + LCDOUT21_MARK, MSIOF0_SCK_MARK, TS_SDAT0_MARK, ADICLK_MARK, + DU2_DB6_MARK, LCDOUT22_MARK, MSIOF0_SYNC_MARK, TS_SCK0_MARK, + SSI_SCK2_MARK, ADIDATA_MARK, DU2_DB7_MARK, LCDOUT23_MARK, + SCIFA2_RXD_B_MARK, MSIOF0_SS1_MARK, ADICHS0_MARK, + DU2_DG5_MARK, LCDOUT13_MARK, MSIOF0_TXD_MARK, ADICHS1_MARK, + DU2_DG6_MARK, LCDOUT14_MARK, + + MSIOF0_SS2_MARK, AUDIO_CLKOUT_MARK, ADICHS2_MARK, + DU2_DISP_MARK, QPOLA_MARK, HTX0_C_MARK, SCIFA2_TXD_B_MARK, + MSIOF0_RXD_MARK, TS_SPSYNC0_MARK, SSI_WS2_MARK, + ADICS_SAMP_MARK, DU2_CDE_MARK, QPOLB_MARK, HRX0_C_MARK, + USB1_PWEN_MARK, AUDIO_CLKOUT_D_MARK, USB1_OVC_MARK, + TCLK1_B_MARK, PINMUX_MARK_END, }; static pinmux_enum_t pinmux_data[] = { PINMUX_DATA_GP_ALL(), /* PINMUX_DATA(GP_M_N_DATA, GP_M_N_FN...), */ + PINMUX_DATA(VI1_DATA7_VI1_B7_MARK, FN_VI1_DATA7_VI1_B7), + PINMUX_DATA(USB0_PWEN_MARK, FN_USB0_PWEN), + PINMUX_DATA(USB0_OVC_VBUS_MARK, FN_USB0_OVC_VBUS), + PINMUX_DATA(USB2_PWEN_MARK, FN_USB2_PWEN), + PINMUX_DATA(USB2_OVC_MARK, FN_USB2_OVC), + PINMUX_DATA(AVS1_MARK, FN_AVS1), + PINMUX_DATA(AVS2_MARK, FN_AVS2), + PINMUX_DATA(DU_DOTCLKIN0_MARK, FN_DU_DOTCLKIN0), + PINMUX_DATA(DU_DOTCLKIN2_MARK, FN_DU_DOTCLKIN2), + PINMUX_IPSR_DATA(IP6_2_0, DACK0), PINMUX_IPSR_DATA(IP6_2_0, IRQ0), PINMUX_IPSR_DATA(IP6_2_0, INTC_IRQ0_N), @@ -364,12 +724,267 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_IPSR_DATA(IP7_30_29, AVB_RXD2), PINMUX_IPSR_DATA(IP7_30_29, MII_RXD2), + PINMUX_IPSR_MODSEL_DATA(IP8_1_0, VI0_DATA1_VI0_B1, SEL_VI0_0), + PINMUX_IPSR_DATA(IP8_1_0, ATARD0_N), + PINMUX_IPSR_DATA(IP8_1_0, AVB_RXD3), + PINMUX_IPSR_DATA(IP8_1_0, MII_RXD3), + PINMUX_IPSR_MODSEL_DATA(IP8_3_2, VI0_DATA2_VI0_B2, SEL_VI0_0), + PINMUX_IPSR_DATA(IP8_3_2, ATAWR0_N), + PINMUX_IPSR_DATA(IP8_3_2, AVB_RXD4), + PINMUX_IPSR_MODSEL_DATA(IP8_5_4, VI0_DATA3_VI0_B3, SEL_VI0_0), + PINMUX_IPSR_DATA(IP8_5_4, ATADIR0_N), + PINMUX_IPSR_DATA(IP8_5_4, AVB_RXD5), + PINMUX_IPSR_MODSEL_DATA(IP8_7_6, VI0_DATA4_VI0_B4, SEL_VI0_0), + PINMUX_IPSR_DATA(IP8_7_6, ATAG0_N), + PINMUX_IPSR_DATA(IP8_7_6, AVB_RXD6), + PINMUX_IPSR_MODSEL_DATA(IP8_9_8, VI0_DATA5_VI0_B5, SEL_VI0_0), + PINMUX_IPSR_DATA(IP8_9_8, EX_WAIT1), + PINMUX_IPSR_DATA(IP8_9_8, AVB_RXD7), + PINMUX_IPSR_MODSEL_DATA(IP8_11_10, VI0_DATA6_VI0_B6, SEL_VI0_0), + PINMUX_IPSR_DATA(IP8_11_10, AVB_RX_ER), + PINMUX_IPSR_DATA(IP8_11_10, MII_RX_ER), + PINMUX_IPSR_MODSEL_DATA(IP8_13_12, VI0_DATA7_VI0_B7, SEL_VI0_0), + PINMUX_IPSR_DATA(IP8_13_12, AVB_RX_CLK), + PINMUX_IPSR_DATA(IP8_13_12, MII_RX_CLK), + PINMUX_IPSR_MODSEL_DATA(IP8_15_14, VI1_CLK, SEL_VI1_0), + PINMUX_IPSR_DATA(IP8_15_14, AVB_RX_DV), + PINMUX_IPSR_DATA(IP8_15_14, MII_RX_DV), + PINMUX_IPSR_MODSEL_DATA(IP8_17_16, VI1_DATA0_VI1_B0, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP8_17_16, SCIFA1_SCK_D, SEL_SCIFA1_3), + PINMUX_IPSR_DATA(IP8_17_16, AVB_CRS), + PINMUX_IPSR_DATA(IP8_17_16, MII_CRS), + PINMUX_IPSR_MODSEL_DATA(IP8_19_18, VI1_DATA1_VI1_B1, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP8_19_18, SCIFA1_RXD_D, SEL_SCIFA1_3), + PINMUX_IPSR_DATA(IP8_19_18, AVB_MDC), + PINMUX_IPSR_DATA(IP8_19_18, MII_MDC), + PINMUX_IPSR_MODSEL_DATA(IP8_21_20, VI1_DATA2_VI1_B2, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP8_21_20, SCIFA1_TXD_D, SEL_SCIFA1_3), + PINMUX_IPSR_DATA(IP8_21_20, AVB_MDIO), + PINMUX_IPSR_DATA(IP8_21_20, MII_MDIO), + PINMUX_IPSR_MODSEL_DATA(IP8_23_22, VI1_DATA3_VI1_B3, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP8_23_22, SCIFA1_CTS_N_D, SEL_SCIFA1_3), + PINMUX_IPSR_DATA(IP8_23_22, AVB_GTX_CLK), + PINMUX_IPSR_MODSEL_DATA(IP8_25_24, VI1_DATA4_VI1_B4, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP8_25_24, SCIFA1_RTS_N_D, SEL_SCIFA1_3), + PINMUX_IPSR_DATA(IP8_25_24, AVB_MAGIC), + PINMUX_IPSR_DATA(IP8_25_24, MII_MAGIC), + PINMUX_IPSR_MODSEL_DATA(IP8_26, VI1_DATA5_VI1_B5, SEL_VI1_0), + PINMUX_IPSR_MODSEL_DATA(IP8_26, AVB_PHY_INT, SEL_SCIFA1_3), + PINMUX_IPSR_MODSEL_DATA(IP8_27, VI1_DATA6_VI1_B6, SEL_VI1_0), + PINMUX_IPSR_DATA(IP8_27, AVB_GTXREFCLK), + PINMUX_IPSR_DATA(IP8_28, SD0_CLK), + PINMUX_IPSR_MODSEL_DATA(IP8_28, VI1_DATA0_VI1_B0_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP8_30_29, SD0_CMD), + PINMUX_IPSR_MODSEL_DATA(IP8_30_29, SCIFB1_SCK_B, SEL_SCIFB1_1), + PINMUX_IPSR_MODSEL_DATA(IP8_30_29, VI1_DATA1_VI1_B1_B, SEL_VI1_1), + + PINMUX_IPSR_DATA(IP9_1_0, SD0_DAT0), + PINMUX_IPSR_MODSEL_DATA(IP9_1_0, SCIFB1_RXD_B, SEL_SCIFB1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_1_0, VI1_DATA2_VI1_B2_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP9_3_2, SD0_DAT1), + PINMUX_IPSR_MODSEL_DATA(IP9_3_2, SCIFB1_TXD_B, SEL_SCIFB1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_3_2, VI1_DATA3_VI1_B3_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP9_5_4, SD0_DAT2), + PINMUX_IPSR_MODSEL_DATA(IP9_5_4, SCIFB1_CTS_N_B, SEL_SCIFB1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_5_4, VI1_DATA4_VI1_B4_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP9_7_6, SD0_DAT3), + PINMUX_IPSR_MODSEL_DATA(IP9_7_6, SCIFB1_RTS_N_B, SEL_SCIFB1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_7_6, VI1_DATA5_VI1_B5_B, SEL_VI1_1), + PINMUX_IPSR_DATA(IP9_11_8, SD0_CD), + PINMUX_IPSR_DATA(IP9_11_8, MMC0_D6), + PINMUX_IPSR_MODSEL_DATA(IP9_11_8, TS_SDEN0_B, SEL_TSIF0_1), + PINMUX_IPSR_DATA(IP9_11_8, USB0_EXTP), + PINMUX_IPSR_MODSEL_DATA(IP9_11_8, GLO_SCLK, SEL_GPS_0), + PINMUX_IPSR_MODSEL_DATA(IP9_11_8, VI1_DATA6_VI1_B6_B, SEL_VI1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_11_8, SCL1_B, SEL_IIC1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_11_8, SCL1_CIS_B, SEL_I2C1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_11_8, VI2_DATA6_VI2_B6_B, SEL_VI2_1), + PINMUX_IPSR_DATA(IP9_15_12, SD0_WP), + PINMUX_IPSR_DATA(IP9_15_12, MMC0_D7), + PINMUX_IPSR_MODSEL_DATA(IP9_15_12, TS_SPSYNC0_B, SEL_TSIF0_1), + PINMUX_IPSR_DATA(IP9_15_12, USB0_IDIN), + PINMUX_IPSR_MODSEL_DATA(IP9_15_12, GLO_SDATA, SEL_GPS_0), + PINMUX_IPSR_MODSEL_DATA(IP9_15_12, VI1_DATA7_VI1_B7_B, SEL_VI1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_15_12, SDA1_B, SEL_IIC1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_15_12, SDA1_CIS_B, SEL_I2C1_1), + PINMUX_IPSR_MODSEL_DATA(IP9_15_12, VI2_DATA7_VI2_B7_B, SEL_VI2_1), + PINMUX_IPSR_DATA(IP9_17_16, SD1_CLK), + PINMUX_IPSR_DATA(IP9_17_16, AVB_TX_EN), + PINMUX_IPSR_DATA(IP9_17_16, MII_TX_EN), + PINMUX_IPSR_DATA(IP9_19_18, SD1_CMD), + PINMUX_IPSR_DATA(IP9_19_18, AVB_TX_ER), + PINMUX_IPSR_DATA(IP9_19_18, MII_TX_ER), + PINMUX_IPSR_MODSEL_DATA(IP9_19_18, SCIFB0_SCK_B, SEL_SCIFB_1), + PINMUX_IPSR_DATA(IP9_21_20, SD1_DAT0), + PINMUX_IPSR_DATA(IP9_21_20, AVB_TX_CLK), + PINMUX_IPSR_DATA(IP9_21_20, MII_TX_CLK), + PINMUX_IPSR_MODSEL_DATA(IP9_21_20, SCIFB0_RXD_B, SEL_SCIFB_1), + PINMUX_IPSR_DATA(IP9_23_22, SD1_DAT1), + PINMUX_IPSR_DATA(IP9_23_22, AVB_LINK), + PINMUX_IPSR_DATA(IP9_23_22, MII_LINK), + PINMUX_IPSR_MODSEL_DATA(IP9_23_22, SCIFB0_TXD_B, SEL_SCIFB_1), + PINMUX_IPSR_DATA(IP9_25_24, SD1_DAT2), + PINMUX_IPSR_DATA(IP9_25_24, AVB_COL), + PINMUX_IPSR_DATA(IP9_25_24, MII_COL), + PINMUX_IPSR_MODSEL_DATA(IP9_25_24, SCIFB0_CTS_N_B, SEL_SCIFB_1), + PINMUX_IPSR_DATA(IP9_27_26, SD1_DAT3), + PINMUX_IPSR_DATA(IP9_27_26, AVB_RXD0), + PINMUX_IPSR_DATA(IP9_27_26, MII_RXD0), + PINMUX_IPSR_MODSEL_DATA(IP9_27_26, SCIFB0_RTS_N_B, SEL_SCIFB_1), + PINMUX_IPSR_DATA(IP9_31_28, SD1_CD), + PINMUX_IPSR_DATA(IP9_31_28, MMC1_D6), + PINMUX_IPSR_MODSEL_DATA(IP9_31_28, TS_SDEN1, SEL_TSIF1_0), + PINMUX_IPSR_DATA(IP9_31_28, USB1_EXTP), + PINMUX_IPSR_MODSEL_DATA(IP9_31_28, GLO_SS, SEL_GPS_0), + PINMUX_IPSR_MODSEL_DATA(IP9_31_28, VI0_CLK_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP9_31_28, SCL2_D, SEL_IIC2_3), + PINMUX_IPSR_MODSEL_DATA(IP9_31_28, SCL2_CIS_D, SEL_I2C2_3), + PINMUX_IPSR_MODSEL_DATA(IP9_31_28, SIM0_CLK_B, SEL_SIM_1), + PINMUX_IPSR_MODSEL_DATA(IP9_31_28, VI3_CLK_B, SEL_VI3_1), + + PINMUX_IPSR_DATA(IP10_3_0, SD1_WP), + PINMUX_IPSR_DATA(IP10_3_0, MMC1_D7), + PINMUX_IPSR_MODSEL_DATA(IP10_3_0, TS_SPSYNC1, SEL_TSIF1_0), + PINMUX_IPSR_DATA(IP10_3_0, USB1_IDIN), + PINMUX_IPSR_MODSEL_DATA(IP10_3_0, GLO_RFON, SEL_GPS_0), + PINMUX_IPSR_MODSEL_DATA(IP10_3_0, VI1_CLK_B, SEL_VI1_1), + PINMUX_IPSR_MODSEL_DATA(IP10_3_0, SDA2_D, SEL_IIC2_3), + PINMUX_IPSR_MODSEL_DATA(IP10_3_0, SDA2_CIS_D, SEL_I2C2_3), + PINMUX_IPSR_MODSEL_DATA(IP10_3_0, SIM0_D_B, SEL_SIM_1), + PINMUX_IPSR_DATA(IP10_6_4, SD2_CLK), + PINMUX_IPSR_DATA(IP10_6_4, MMC0_CLK), + PINMUX_IPSR_MODSEL_DATA(IP10_6_4, SIM0_CLK, SEL_SIM_0), + PINMUX_IPSR_MODSEL_DATA(IP10_6_4, VI0_DATA0_VI0_B0_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP10_6_4, TS_SDEN0_C, SEL_TSIF0_2), + PINMUX_IPSR_MODSEL_DATA(IP10_6_4, GLO_SCLK_B, SEL_GPS_1), + PINMUX_IPSR_MODSEL_DATA(IP10_6_4, VI3_DATA0_B, SEL_VI3_1), + PINMUX_IPSR_DATA(IP10_10_7, SD2_CMD), + PINMUX_IPSR_DATA(IP10_10_7, MMC0_CMD), + PINMUX_IPSR_MODSEL_DATA(IP10_10_7, SIM0_D, SEL_SIM_0), + PINMUX_IPSR_MODSEL_DATA(IP10_10_7, VI0_DATA1_VI0_B1_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP10_10_7, SCIFB1_SCK_E, SEL_SCIFB1_4), + PINMUX_IPSR_MODSEL_DATA(IP10_10_7, SCK1_D, SEL_SCIF1_3), + PINMUX_IPSR_MODSEL_DATA(IP10_10_7, TS_SPSYNC0_C, SEL_TSIF0_2), + PINMUX_IPSR_MODSEL_DATA(IP10_10_7, GLO_SDATA_B, SEL_GPS_1), + PINMUX_IPSR_MODSEL_DATA(IP10_10_7, VI3_DATA1_B, SEL_VI3_1), + PINMUX_IPSR_DATA(IP10_14_11, SD2_DAT0), + PINMUX_IPSR_DATA(IP10_14_11, MMC0_D0), + PINMUX_IPSR_MODSEL_DATA(IP10_14_11, FMCLK_B, SEL_FM_1), + PINMUX_IPSR_MODSEL_DATA(IP10_14_11, VI0_DATA2_VI0_B2_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP10_14_11, SCIFB1_RXD_E, SEL_SCIFB1_4), + PINMUX_IPSR_MODSEL_DATA(IP10_14_11, RX1_D, SEL_SCIF1_3), + PINMUX_IPSR_MODSEL_DATA(IP10_14_11, TS_SDAT0_C, SEL_TSIF0_2), + PINMUX_IPSR_MODSEL_DATA(IP10_14_11, GLO_SS_B, SEL_GPS_1), + PINMUX_IPSR_MODSEL_DATA(IP10_14_11, VI3_DATA2_B, SEL_VI3_1), + PINMUX_IPSR_DATA(IP10_18_15, SD2_DAT1), + PINMUX_IPSR_DATA(IP10_18_15, MMC0_D1), + PINMUX_IPSR_MODSEL_DATA(IP10_18_15, FMIN_B, SEL_FM_1), + PINMUX_IPSR_MODSEL_DATA(IP10_18_15, RDS_DATA, SEL_RDS_0), + PINMUX_IPSR_MODSEL_DATA(IP10_18_15, VI0_DATA3_VI0_B3_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP10_18_15, SCIFB1_TXD_E, SEL_SCIFB1_4), + PINMUX_IPSR_MODSEL_DATA(IP10_18_15, TX1_D, SEL_SCIF1_3), + PINMUX_IPSR_MODSEL_DATA(IP10_18_15, TS_SCK0_C, SEL_TSIF0_2), + PINMUX_IPSR_MODSEL_DATA(IP10_18_15, GLO_RFON_B, SEL_GPS_1), + PINMUX_IPSR_MODSEL_DATA(IP10_18_15, VI3_DATA3_B, SEL_VI3_1), + PINMUX_IPSR_DATA(IP10_22_19, SD2_DAT2), + PINMUX_IPSR_DATA(IP10_22_19, MMC0_D2), + PINMUX_IPSR_MODSEL_DATA(IP10_22_19, BPFCLK_B, SEL_FM_1), + PINMUX_IPSR_MODSEL_DATA(IP10_22_19, RDS_CLK, SEL_RDS_0), + PINMUX_IPSR_MODSEL_DATA(IP10_22_19, VI0_DATA4_VI0_B4_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP10_22_19, HRX0_D, SEL_HSCIF0_3), + PINMUX_IPSR_MODSEL_DATA(IP10_22_19, TS_SDEN1_B, SEL_TSIF1_1), + PINMUX_IPSR_MODSEL_DATA(IP10_22_19, GLO_Q0_B, SEL_GPS_1), + PINMUX_IPSR_MODSEL_DATA(IP10_22_19, VI3_DATA4_B, SEL_VI3_1), + PINMUX_IPSR_DATA(IP10_25_23, SD2_DAT3), + PINMUX_IPSR_DATA(IP10_25_23, MMC0_D3), + PINMUX_IPSR_MODSEL_DATA(IP10_25_23, SIM0_RST, SEL_SIM_0), + PINMUX_IPSR_MODSEL_DATA(IP10_25_23, VI0_DATA5_VI0_B5_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP10_25_23, HTX0_D, SEL_HSCIF0_3), + PINMUX_IPSR_MODSEL_DATA(IP10_25_23, TS_SPSYNC1_B, SEL_TSIF1_1), + PINMUX_IPSR_MODSEL_DATA(IP10_25_23, GLO_Q1_B, SEL_GPS_1), + PINMUX_IPSR_MODSEL_DATA(IP10_25_23, VI3_DATA5_B, SEL_VI3_1), + PINMUX_IPSR_DATA(IP10_29_26, SD2_CD), + PINMUX_IPSR_DATA(IP10_29_26, MMC0_D4), + PINMUX_IPSR_MODSEL_DATA(IP10_29_26, TS_SDAT0_B, SEL_TSIF0_1), + PINMUX_IPSR_DATA(IP10_29_26, USB2_EXTP), + PINMUX_IPSR_MODSEL_DATA(IP10_29_26, GLO_I0, SEL_GPS_0), + PINMUX_IPSR_MODSEL_DATA(IP10_29_26, VI0_DATA6_VI0_B6_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP10_29_26, HCTS0_N_D, SEL_HSCIF0_3), + PINMUX_IPSR_MODSEL_DATA(IP10_29_26, TS_SDAT1_B, SEL_TSIF1_1), + PINMUX_IPSR_MODSEL_DATA(IP10_29_26, GLO_I0_B, SEL_GPS_1), + PINMUX_IPSR_MODSEL_DATA(IP10_29_26, VI3_DATA6_B, SEL_VI3_1), + + PINMUX_IPSR_DATA(IP11_3_0, SD2_WP), + PINMUX_IPSR_DATA(IP11_3_0, MMC0_D5), + PINMUX_IPSR_MODSEL_DATA(IP11_3_0, TS_SCK0_B, SEL_TSIF0_1), + PINMUX_IPSR_DATA(IP11_3_0, USB2_IDIN), + PINMUX_IPSR_MODSEL_DATA(IP11_3_0, GLO_I1, SEL_GPS_0), + PINMUX_IPSR_MODSEL_DATA(IP11_3_0, VI0_DATA7_VI0_B7_B, SEL_VI0_1), + PINMUX_IPSR_MODSEL_DATA(IP11_3_0, HRTS0_N_D, SEL_HSCIF0_3), + PINMUX_IPSR_MODSEL_DATA(IP11_3_0, TS_SCK1_B, SEL_TSIF1_1), + PINMUX_IPSR_MODSEL_DATA(IP11_3_0, GLO_I1_B, SEL_GPS_1), + PINMUX_IPSR_MODSEL_DATA(IP11_3_0, VI3_DATA7_B, SEL_VI3_1), + PINMUX_IPSR_DATA(IP11_4, SD3_CLK), + PINMUX_IPSR_DATA(IP11_4, MMC1_CLK), + PINMUX_IPSR_DATA(IP11_6_5, SD3_CMD), + PINMUX_IPSR_DATA(IP11_6_5, MMC1_CMD), + PINMUX_IPSR_DATA(IP11_6_5, MTS_N), + PINMUX_IPSR_DATA(IP11_8_7, SD3_DAT0), + PINMUX_IPSR_DATA(IP11_8_7, MMC1_D0), + PINMUX_IPSR_DATA(IP11_8_7, STM_N), + PINMUX_IPSR_DATA(IP11_10_9, SD3_DAT1), + PINMUX_IPSR_DATA(IP11_10_9, MMC1_D1), + PINMUX_IPSR_DATA(IP11_10_9, MDATA), + PINMUX_IPSR_DATA(IP11_12_11, SD3_DAT2), + PINMUX_IPSR_DATA(IP11_12_11, MMC1_D2), + PINMUX_IPSR_DATA(IP11_12_11, SDATA), + PINMUX_IPSR_DATA(IP11_14_13, SD3_DAT3), + PINMUX_IPSR_DATA(IP11_14_13, MMC1_D3), + PINMUX_IPSR_DATA(IP11_14_13, SCKZ), + PINMUX_IPSR_DATA(IP11_17_15, SD3_CD), + PINMUX_IPSR_DATA(IP11_17_15, MMC1_D4), + PINMUX_IPSR_MODSEL_DATA(IP11_17_15, TS_SDAT1, SEL_TSIF1_0), + PINMUX_IPSR_DATA(IP11_17_15, VSP), + PINMUX_IPSR_MODSEL_DATA(IP11_17_15, GLO_Q0, SEL_GPS_0), + PINMUX_IPSR_MODSEL_DATA(IP11_17_15, SIM0_RST_B, SEL_SIM_1), + PINMUX_IPSR_DATA(IP11_21_18, SD3_WP), + PINMUX_IPSR_DATA(IP11_21_18, MMC1_D5), + PINMUX_IPSR_MODSEL_DATA(IP11_21_18, TS_SCK1, SEL_TSIF1_0), + PINMUX_IPSR_MODSEL_DATA(IP11_21_18, GLO_Q1, SEL_GPS_0), + PINMUX_IPSR_MODSEL_DATA(IP11_21_18, FMIN_C, SEL_FM_2), + PINMUX_IPSR_MODSEL_DATA(IP11_21_18, RDS_DATA_B, SEL_RDS_1), + PINMUX_IPSR_MODSEL_DATA(IP11_21_18, FMIN_E, SEL_FM_4), + PINMUX_IPSR_MODSEL_DATA(IP11_21_18, RDS_DATA_D, SEL_RDS_3), + PINMUX_IPSR_MODSEL_DATA(IP11_21_18, FMIN_F, SEL_FM_5), + PINMUX_IPSR_MODSEL_DATA(IP11_21_18, RDS_DATA_E, SEL_RDS_4), + PINMUX_IPSR_DATA(IP11_23_22, MLB_CLK), + PINMUX_IPSR_MODSEL_DATA(IP11_23_22, SCL2_B, SEL_IIC2_1), + PINMUX_IPSR_MODSEL_DATA(IP11_23_22, SCL2_CIS_B, SEL_I2C2_1), + PINMUX_IPSR_DATA(IP11_26_24, MLB_SIG), + PINMUX_IPSR_MODSEL_DATA(IP11_26_24, SCIFB1_RXD_D, SEL_SCIFB1_3), + PINMUX_IPSR_MODSEL_DATA(IP11_26_24, RX1_C, SEL_SCIF1_2), + PINMUX_IPSR_MODSEL_DATA(IP11_26_24, SDA2_B, SEL_IIC2_1), + PINMUX_IPSR_MODSEL_DATA(IP11_26_24, SDA2_CIS_B, SEL_I2C2_1), + PINMUX_IPSR_DATA(IP11_29_27, MLB_DAT), + PINMUX_IPSR_DATA(IP11_29_27, SPV_EVEN), + PINMUX_IPSR_MODSEL_DATA(IP11_29_27, SCIFB1_TXD_D, SEL_SCIFB1_3), + PINMUX_IPSR_MODSEL_DATA(IP11_29_27, TX1_C, SEL_SCIF1_2), + PINMUX_IPSR_MODSEL_DATA(IP11_29_27, BPFCLK_C, SEL_FM_2), + PINMUX_IPSR_MODSEL_DATA(IP11_29_27, RDS_CLK_B, SEL_RDS_1), + PINMUX_IPSR_DATA(IP11_31_30, SSI_SCK0129), + PINMUX_IPSR_MODSEL_DATA(IP11_31_30, CAN_CLK_B, SEL_CANCLK_1), + PINMUX_IPSR_DATA(IP11_31_30, MOUT0), + }; static struct pinmux_gpio pinmux_gpios[] = { PINMUX_GPIO_GP_ALL(), - /*IPSR0 - IPSR5*/ + GPIO_FN(VI1_DATA7_VI1_B7), GPIO_FN(USB0_PWEN), GPIO_FN(USB0_OVC_VBUS), + GPIO_FN(USB2_PWEN), GPIO_FN(USB2_OVC), GPIO_FN(AVS1), GPIO_FN(AVS2), + GPIO_FN(DU_DOTCLKIN0), GPIO_FN(DU_DOTCLKIN2), + + /* IPSR0 - IPSR5 */ /*IPSR6*/ GPIO_FN(DACK0), GPIO_FN(IRQ0), GPIO_FN(INTC_IRQ0_N), GPIO_FN(SSI_SCK6_B), GPIO_FN(VI1_VSYNC_N), GPIO_FN(VI1_VSYNC_N_B), @@ -413,7 +1028,97 @@ static struct pinmux_gpio pinmux_gpios[] = { GPIO_FN(VI0_CLK), GPIO_FN(ATACS00_N), GPIO_FN(AVB_RXD1), GPIO_FN(MII_RXD1), GPIO_FN(VI0_DATA0_VI0_B0), GPIO_FN(ATACS10_N), GPIO_FN(AVB_RXD2), GPIO_FN(MII_RXD2), - /*IPSR8 - IPSR16*/ + + /*IPSR8*/ + GPIO_FN(VI0_DATA1_VI0_B1), GPIO_FN(ATARD0_N), GPIO_FN(AVB_RXD3), + GPIO_FN(MII_RXD3), GPIO_FN(VI0_DATA2_VI0_B2), GPIO_FN(ATAWR0_N), + GPIO_FN(AVB_RXD4), GPIO_FN(VI0_DATA3_VI0_B3), GPIO_FN(ATADIR0_N), + GPIO_FN(AVB_RXD5), GPIO_FN(VI0_DATA4_VI0_B4), GPIO_FN(ATAG0_N), + GPIO_FN(AVB_RXD6), GPIO_FN(VI0_DATA5_VI0_B5), GPIO_FN(EX_WAIT1), + GPIO_FN(AVB_RXD7), GPIO_FN(VI0_DATA6_VI0_B6), GPIO_FN(AVB_RX_ER), + GPIO_FN(MII_RX_ER), GPIO_FN(VI0_DATA7_VI0_B7), GPIO_FN(AVB_RX_CLK), + GPIO_FN(MII_RX_CLK), GPIO_FN(VI1_CLK), GPIO_FN(AVB_RX_DV), + GPIO_FN(MII_RX_DV), GPIO_FN(VI1_DATA0_VI1_B0), GPIO_FN(SCIFA1_SCK_D), + GPIO_FN(AVB_CRS), GPIO_FN(MII_CRS), GPIO_FN(VI1_DATA1_VI1_B1), + GPIO_FN(SCIFA1_RXD_D), GPIO_FN(AVB_MDC), GPIO_FN(MII_MDC), + GPIO_FN(VI1_DATA2_VI1_B2), GPIO_FN(SCIFA1_TXD_D), GPIO_FN(AVB_MDIO), + GPIO_FN(MII_MDIO), GPIO_FN(VI1_DATA3_VI1_B3), GPIO_FN(SCIFA1_CTS_N_D), + GPIO_FN(AVB_GTX_CLK), GPIO_FN(VI1_DATA4_VI1_B4), + GPIO_FN(SCIFA1_RTS_N_D), GPIO_FN(AVB_MAGIC), GPIO_FN(MII_MAGIC), + GPIO_FN(VI1_DATA5_VI1_B5), GPIO_FN(AVB_PHY_INT), + GPIO_FN(VI1_DATA6_VI1_B6), GPIO_FN(AVB_GTXREFCLK), + GPIO_FN(SD0_CLK), GPIO_FN(VI1_DATA0_VI1_B0_B), GPIO_FN(SD0_CMD), + GPIO_FN(SCIFB1_SCK_B), GPIO_FN(VI1_DATA1_VI1_B1_B), + + /*IPSR9*/ + GPIO_FN(SD0_DAT0), GPIO_FN(SCIFB1_RXD_B), GPIO_FN(VI1_DATA2_VI1_B2_B), + GPIO_FN(SD0_DAT1), GPIO_FN(SCIFB1_TXD_B), GPIO_FN(VI1_DATA3_VI1_B3_B), + GPIO_FN(SD0_DAT2), GPIO_FN(SCIFB1_CTS_N_B), GPIO_FN(VI1_DATA4_VI1_B4_B), + GPIO_FN(SD0_DAT3), GPIO_FN(SCIFB1_RTS_N_B), GPIO_FN(VI1_DATA5_VI1_B5_B), + GPIO_FN(SD0_CD), GPIO_FN(MMC0_D6), GPIO_FN(TS_SDEN0_B), + GPIO_FN(USB0_EXTP), GPIO_FN(GLO_SCLK), GPIO_FN(VI1_DATA6_VI1_B6_B), + GPIO_FN(SCL1_B), GPIO_FN(SCL1_CIS_B), GPIO_FN(VI2_DATA6_VI2_B6_B), + GPIO_FN(SD0_WP), GPIO_FN(MMC0_D7), GPIO_FN(TS_SPSYNC0_B), + GPIO_FN(USB0_IDIN), GPIO_FN(GLO_SDATA), GPIO_FN(VI1_DATA7_VI1_B7_B), + GPIO_FN(SDA1_B), GPIO_FN(SDA1_CIS_B), GPIO_FN(VI2_DATA7_VI2_B7_B), + GPIO_FN(SD1_CLK), GPIO_FN(AVB_TX_EN), GPIO_FN(MII_TX_EN), + GPIO_FN(SD1_CMD), GPIO_FN(AVB_TX_ER), GPIO_FN(MII_TX_ER), + GPIO_FN(SCIFB0_SCK_B), GPIO_FN(SD1_DAT0), GPIO_FN(AVB_TX_CLK), + GPIO_FN(MII_TX_CLK), GPIO_FN(SCIFB0_RXD_B), GPIO_FN(SD1_DAT1), + GPIO_FN(AVB_LINK), GPIO_FN(MII_LINK), GPIO_FN(SCIFB0_TXD_B), + GPIO_FN(SD1_DAT2), GPIO_FN(AVB_COL), GPIO_FN(MII_COL), + GPIO_FN(SCIFB0_CTS_N_B), GPIO_FN(SD1_DAT3), GPIO_FN(AVB_RXD0), + GPIO_FN(MII_RXD0), GPIO_FN(SCIFB0_RTS_N_B), GPIO_FN(SD1_CD), + GPIO_FN(MMC1_D6), GPIO_FN(TS_SDEN1), GPIO_FN(USB1_EXTP), + GPIO_FN(GLO_SS), GPIO_FN(VI0_CLK_B), GPIO_FN(SCL2_D), + GPIO_FN(SCL2_CIS_D), GPIO_FN(SIM0_CLK_B), GPIO_FN(VI3_CLK_B), + + /*IPSR10*/ + GPIO_FN(SD1_WP), GPIO_FN(MMC1_D7), GPIO_FN(TS_SPSYNC1), + GPIO_FN(USB1_IDIN), GPIO_FN(GLO_RFON), GPIO_FN(VI1_CLK_B), + GPIO_FN(SDA2_D), GPIO_FN(SDA2_CIS_D), GPIO_FN(SIM0_D_B), + GPIO_FN(SD2_CLK), GPIO_FN(MMC0_CLK), GPIO_FN(SIM0_CLK), + GPIO_FN(VI0_DATA0_VI0_B0_B), GPIO_FN(TS_SDEN0_C), GPIO_FN(GLO_SCLK_B), + GPIO_FN(VI3_DATA0_B), GPIO_FN(SD2_CMD), GPIO_FN(MMC0_CMD), + GPIO_FN(SIM0_D), GPIO_FN(VI0_DATA1_VI0_B1_B), GPIO_FN(SCIFB1_SCK_E), + GPIO_FN(SCK1_D), GPIO_FN(TS_SPSYNC0_C), GPIO_FN(GLO_SDATA_B), + GPIO_FN(VI3_DATA1_B), GPIO_FN(SD2_DAT0), GPIO_FN(MMC0_D0), + GPIO_FN(FMCLK_B), GPIO_FN(VI0_DATA2_VI0_B2_B), GPIO_FN(SCIFB1_RXD_E), + GPIO_FN(RX1_D), GPIO_FN(TS_SDAT0_C), GPIO_FN(GLO_SS_B), + GPIO_FN(VI3_DATA2_B), GPIO_FN(SD2_DAT1), GPIO_FN(MMC0_D1), + GPIO_FN(FMIN_B), GPIO_FN(RDS_DATA), GPIO_FN(VI0_DATA3_VI0_B3_B), + GPIO_FN(SCIFB1_TXD_E), GPIO_FN(TX1_D), GPIO_FN(TS_SCK0_C), + GPIO_FN(GLO_RFON_B), GPIO_FN(VI3_DATA3_B), GPIO_FN(SD2_DAT2), + GPIO_FN(MMC0_D2), GPIO_FN(BPFCLK_B), GPIO_FN(RDS_CLK), + GPIO_FN(VI0_DATA4_VI0_B4_B), GPIO_FN(HRX0_D), GPIO_FN(TS_SDEN1_B), + GPIO_FN(GLO_Q0_B), GPIO_FN(VI3_DATA4_B), GPIO_FN(SD2_DAT3), + GPIO_FN(MMC0_D3), GPIO_FN(SIM0_RST), GPIO_FN(VI0_DATA5_VI0_B5_B), + GPIO_FN(HTX0_D), GPIO_FN(TS_SPSYNC1_B), GPIO_FN(GLO_Q1_B), + GPIO_FN(VI3_DATA5_B), GPIO_FN(SD2_CD), GPIO_FN(MMC0_D4), + GPIO_FN(TS_SDAT0_B), GPIO_FN(USB2_EXTP), GPIO_FN(GLO_I0), + GPIO_FN(VI0_DATA6_VI0_B6_B), GPIO_FN(HCTS0_N_D), GPIO_FN(TS_SDAT1_B), + GPIO_FN(GLO_I0_B), GPIO_FN(VI3_DATA6_B), + + /*IPSR11*/ + GPIO_FN(SD2_WP), GPIO_FN(MMC0_D5), GPIO_FN(TS_SCK0_B), + GPIO_FN(USB2_IDIN), GPIO_FN(GLO_I1), GPIO_FN(VI0_DATA7_VI0_B7_B), + GPIO_FN(HRTS0_N_D), GPIO_FN(TS_SCK1_B), GPIO_FN(GLO_I1_B), + GPIO_FN(VI3_DATA7_B), GPIO_FN(SD3_CLK), GPIO_FN(MMC1_CLK), + GPIO_FN(SD3_CMD), GPIO_FN(MMC1_CMD), GPIO_FN(MTS_N), GPIO_FN(SD3_DAT0), + GPIO_FN(MMC1_D0), GPIO_FN(STM_N), GPIO_FN(SD3_DAT1), GPIO_FN(MMC1_D1), + GPIO_FN(MDATA), GPIO_FN(SD3_DAT2), GPIO_FN(MMC1_D2), GPIO_FN(SDATA), + GPIO_FN(SD3_DAT3), GPIO_FN(MMC1_D3), GPIO_FN(SCKZ), GPIO_FN(SD3_CD), + GPIO_FN(MMC1_D4), GPIO_FN(TS_SDAT1), GPIO_FN(VSP), GPIO_FN(GLO_Q0), + GPIO_FN(SIM0_RST_B), GPIO_FN(SD3_WP), GPIO_FN(MMC1_D5), + GPIO_FN(TS_SCK1), GPIO_FN(GLO_Q1), GPIO_FN(FMIN_C), GPIO_FN(RDS_DATA_B), + GPIO_FN(FMIN_E), GPIO_FN(RDS_DATA_D), GPIO_FN(FMIN_F), + GPIO_FN(RDS_DATA_E), GPIO_FN(MLB_CLK), GPIO_FN(SCL2_B), + GPIO_FN(SCL2_CIS_B), GPIO_FN(MLB_SIG), GPIO_FN(SCIFB1_RXD_D), + GPIO_FN(RX1_C), GPIO_FN(SDA2_B), GPIO_FN(SDA2_CIS_B), GPIO_FN(MLB_DAT), + GPIO_FN(SPV_EVEN), GPIO_FN(SCIFB1_TXD_D), GPIO_FN(TX1_C), + GPIO_FN(BPFCLK_C), GPIO_FN(RDS_CLK_B), GPIO_FN(SSI_SCK0129), + GPIO_FN(CAN_CLK_B), GPIO_FN(MOUT0), + }; static struct pinmux_cfg_reg pinmux_config_regs[] = { @@ -621,8 +1326,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = { GP_5_1_FN, FN_IP14_24_22, GP_5_0_FN, FN_IP14_21_19 } }, - - /*IPSR0 - IPSR5*/ + /* IPSR0 - IPSR5 */ { PINMUX_CFG_REG_VAR("IPSR6", 0xE6060038, 32, 3, 3, 3, 3, 3, 3, 3, 2, 3, 3, 3) { /* IP6_31_29 [3] */ @@ -696,7 +1400,288 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = { FN_ETH_MDIO, FN_RMII_MDIO, FN_HRTS0_N_E, FN_SIM0_D_C, FN_HCTS0_N_F, 0, 0, 0, } }, - /*IPSR8 - IPSR16*/ + { PINMUX_CFG_REG_VAR("IPSR8", 0xE6060040, 32, + 1, 2, 1, 1, 1, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2) { + /* IP8_31 [1] */ + 0, 0, + /* IP8_30_29 [2] */ + FN_SD0_CMD, FN_SCIFB1_SCK_B, FN_VI1_DATA1_VI1_B1_B, 0, + /* IP8_28 [1] */ + FN_SD0_CLK, FN_VI1_DATA0_VI1_B0_B, + /* IP8_27 [1] */ + FN_VI1_DATA6_VI1_B6, FN_AVB_GTXREFCLK, + /* IP8_26 [1] */ + FN_VI1_DATA5_VI1_B5, FN_AVB_PHY_INT, + /* IP8_25_24 [2] */ + FN_VI1_DATA4_VI1_B4, FN_SCIFA1_RTS_N_D, + FN_AVB_MAGIC, FN_MII_MAGIC, + /* IP8_23_22 [2] */ + FN_VI1_DATA3_VI1_B3, FN_SCIFA1_CTS_N_D, FN_AVB_GTX_CLK, 0, + /* IP8_21_20 [2] */ + FN_VI1_DATA2_VI1_B2, FN_SCIFA1_TXD_D, FN_AVB_MDIO, + FN_MII_MDIO, + /* IP8_19_18 [2] */ + FN_VI1_DATA1_VI1_B1, FN_SCIFA1_RXD_D, FN_AVB_MDC, FN_MII_MDC, + /* IP8_17_16 [2] */ + FN_VI1_DATA0_VI1_B0, FN_SCIFA1_SCK_D, FN_AVB_CRS, FN_MII_CRS, + /* IP8_15_14 [2] */ + FN_VI1_CLK, FN_AVB_RX_DV, FN_MII_RX_DV, 0, + /* IP8_13_12 [2] */ + FN_VI0_DATA7_VI0_B7, FN_AVB_RX_CLK, FN_MII_RX_CLK, 0, + /* IP8_11_10 [2] */ + FN_VI0_DATA6_VI0_B6, FN_AVB_RX_ER, FN_MII_RX_ER, 0, + /* IP8_9_8 [2] */ + FN_VI0_DATA5_VI0_B5, FN_EX_WAIT1, FN_AVB_RXD7, 0, + /* IP8_7_6 [2] */ + FN_VI0_DATA4_VI0_B4, FN_ATAG0_N, FN_AVB_RXD6, 0, + /* IP8_5_4 [2] */ + FN_VI0_DATA3_VI0_B3, FN_ATADIR0_N, FN_AVB_RXD5, 0, + /* IP8_3_2 [2] */ + FN_VI0_DATA2_VI0_B2, FN_ATAWR0_N, FN_AVB_RXD4, 0, + /* IP8_1_0 [2] */ + FN_VI0_DATA1_VI0_B1, FN_ATARD0_N, FN_AVB_RXD3, FN_MII_RXD3, } + }, + { PINMUX_CFG_REG_VAR("IPSR9", 0xE6060044, 32, + 4, 2, 2, 2, 2, 2, 2, 4, 4, 2, 2, 2, 2) { + /* IP9_31_28 [4] */ + FN_SD1_CD, FN_MMC1_D6, FN_TS_SDEN1, FN_USB1_EXTP, + FN_GLO_SS, FN_VI0_CLK_B, FN_SCL2_D, FN_SCL2_CIS_D, + FN_SIM0_CLK_B, FN_VI3_CLK_B, 0, 0, 0, 0, 0, 0, + /* IP9_27_26 [2] */ + FN_SD1_DAT3, FN_AVB_RXD0, FN_MII_RXD0, FN_SCIFB0_RTS_N_B, + /* IP9_25_24 [2] */ + FN_SD1_DAT2, FN_AVB_COL, FN_MII_COL, FN_SCIFB0_CTS_N_B, + /* IP9_23_22 [2] */ + FN_SD1_DAT1, FN_AVB_LINK, FN_MII_LINK, FN_SCIFB0_TXD_B, + /* IP9_21_20 [2] */ + FN_SD1_DAT0, FN_AVB_TX_CLK, FN_MII_TX_CLK, FN_SCIFB0_RXD_B, + /* IP9_19_18 [2] */ + FN_SD1_CMD, FN_AVB_TX_ER, FN_MII_TX_ER, FN_SCIFB0_SCK_B, + /* IP9_17_16 [2] */ + FN_SD1_CLK, FN_AVB_TX_EN, FN_MII_TX_EN, 0, + /* IP9_15_12 [4] */ + FN_SD0_WP, FN_MMC0_D7, FN_TS_SPSYNC0_B, FN_USB0_IDIN, + FN_GLO_SDATA, FN_VI1_DATA7_VI1_B7_B, FN_SDA1_B, + FN_SDA1_CIS_B, FN_VI2_DATA7_VI2_B7_B, 0, 0, 0, 0, 0, 0, 0, + /* IP9_11_8 [4] */ + FN_SD0_CD, FN_MMC0_D6, FN_TS_SDEN0_B, FN_USB0_EXTP, + FN_GLO_SCLK, FN_VI1_DATA6_VI1_B6_B, FN_SCL1_B, + FN_SCL1_CIS_B, FN_VI2_DATA6_VI2_B6_B, 0, 0, 0, 0, 0, 0, 0, + /* IP9_7_6 [2] */ + FN_SD0_DAT3, FN_SCIFB1_RTS_N_B, FN_VI1_DATA5_VI1_B5_B, 0, + /* IP9_5_4 [2] */ + FN_SD0_DAT2, FN_SCIFB1_CTS_N_B, FN_VI1_DATA4_VI1_B4_B, 0, + /* IP9_3_2 [2] */ + FN_SD0_DAT1, FN_SCIFB1_TXD_B, FN_VI1_DATA3_VI1_B3_B, 0, + /* IP9_1_0 [2] */ + FN_SD0_DAT0, FN_SCIFB1_RXD_B, FN_VI1_DATA2_VI1_B2_B, 0, } + }, + { PINMUX_CFG_REG_VAR("IPSR10", 0xE6060048, 32, + 2, 4, 3, 4, 4, 4, 4, 3, 4) { + /* IP10_31_30 [2] */ + 0, 0, 0, 0, + /* IP10_29_26 [4] */ + FN_SD2_CD, FN_MMC0_D4, FN_TS_SDAT0_B, FN_USB2_EXTP, FN_GLO_I0, + FN_VI0_DATA6_VI0_B6_B, FN_HCTS0_N_D, FN_TS_SDAT1_B, + FN_GLO_I0_B, FN_VI3_DATA6_B, 0, 0, 0, 0, 0, 0, + /* IP10_25_23 [3] */ + FN_SD2_DAT3, FN_MMC0_D3, FN_SIM0_RST, FN_VI0_DATA5_VI0_B5_B, + FN_HTX0_D, FN_TS_SPSYNC1_B, FN_GLO_Q1_B, FN_VI3_DATA5_B, + /* IP10_22_19 [4] */ + FN_SD2_DAT2, FN_MMC0_D2, FN_BPFCLK_B, FN_RDS_CLK, + FN_VI0_DATA4_VI0_B4_B, FN_HRX0_D, FN_TS_SDEN1_B, + FN_GLO_Q0_B, FN_VI3_DATA4_B, 0, 0, 0, 0, 0, 0, 0, + /* IP10_18_15 [4] */ + FN_SD2_DAT1, FN_MMC0_D1, FN_FMIN_B, FN_RDS_DATA, + FN_VI0_DATA3_VI0_B3_B, FN_SCIFB1_TXD_E, FN_TX1_D, + FN_TS_SCK0_C, FN_GLO_RFON_B, FN_VI3_DATA3_B, + 0, 0, 0, 0, 0, 0, + /* IP10_14_11 [4] */ + FN_SD2_DAT0, FN_MMC0_D0, FN_FMCLK_B, + FN_VI0_DATA2_VI0_B2_B, FN_SCIFB1_RXD_E, FN_RX1_D, + FN_TS_SDAT0_C, FN_GLO_SS_B, FN_VI3_DATA2_B, + 0, 0, 0, 0, 0, 0, 0, + /* IP10_10_7 [4] */ + FN_SD2_CMD, FN_MMC0_CMD, FN_SIM0_D, + FN_VI0_DATA1_VI0_B1_B, FN_SCIFB1_SCK_E, FN_SCK1_D, + FN_TS_SPSYNC0_C, FN_GLO_SDATA_B, FN_VI3_DATA1_B, + 0, 0, 0, 0, 0, 0, 0, + /* IP10_6_4 [3] */ + FN_SD2_CLK, FN_MMC0_CLK, FN_SIM0_CLK, + FN_VI0_DATA0_VI0_B0_B, FN_TS_SDEN0_C, FN_GLO_SCLK_B, + FN_VI3_DATA0_B, 0, + /* IP10_3_0 [4] */ + FN_SD1_WP, FN_MMC1_D7, FN_TS_SPSYNC1, FN_USB1_IDIN, + FN_GLO_RFON, FN_VI1_CLK_B, FN_SDA2_D, FN_SDA2_CIS_D, + FN_SIM0_D_B, 0, 0, 0, 0, 0, 0, 0, } + }, + { PINMUX_CFG_REG_VAR("IPSR11", 0xE606004C, 32, + 2, 3, 3, 2, 4, 3, 2, 2, 2, 2, 2, 1, 4) { + /* IP11_31_30 [2] */ + FN_SSI_SCK0129, FN_CAN_CLK_B, FN_MOUT0, 0, + /* IP11_29_27 [3] */ + FN_MLB_DAT, FN_SPV_EVEN, FN_SCIFB1_TXD_D, FN_TX1_C, FN_BPFCLK_C, + FN_RDS_CLK_B, 0, 0, + /* IP11_26_24 [3] */ + FN_MLB_SIG, FN_SCIFB1_RXD_D, FN_RX1_C, FN_SDA2_B, FN_SDA2_CIS_B, + 0, 0, 0, + /* IP11_23_22 [2] */ + FN_MLB_CLK, FN_SCL2_B, FN_SCL2_CIS_B, 0, + /* IP11_21_18 [4] */ + FN_SD3_WP, FN_MMC1_D5, FN_TS_SCK1, FN_GLO_Q1, FN_FMIN_C, + FN_RDS_DATA_B, FN_FMIN_E, FN_RDS_DATA_D, FN_FMIN_F, + FN_RDS_DATA_E, 0, 0, 0, 0, 0, 0, + /* IP11_17_15 [3] */ + FN_SD3_CD, FN_MMC1_D4, FN_TS_SDAT1, + FN_VSP, FN_GLO_Q0, FN_SIM0_RST_B, 0, 0, + /* IP11_14_13 [2] */ + FN_SD3_DAT3, FN_MMC1_D3, FN_SCKZ, 0, + /* IP11_12_11 [2] */ + FN_SD3_DAT2, FN_MMC1_D2, FN_SDATA, 0, + /* IP11_10_9 [2] */ + FN_SD3_DAT1, FN_MMC1_D1, FN_MDATA, 0, + /* IP11_8_7 [2] */ + FN_SD3_DAT0, FN_MMC1_D0, FN_STM_N, 0, + /* IP11_6_5 [2] */ + FN_SD3_CMD, FN_MMC1_CMD, FN_MTS_N, 0, + /* IP11_4 [1] */ + FN_SD3_CLK, FN_MMC1_CLK, + /* IP11_3_0 [4] */ + FN_SD2_WP, FN_MMC0_D5, FN_TS_SCK0_B, FN_USB2_IDIN, + FN_GLO_I1, FN_VI0_DATA7_VI0_B7_B, FN_HRTS0_N_D, + FN_TS_SCK1_B, FN_GLO_I1_B, FN_VI3_DATA7_B, 0, 0, 0, 0, 0, 0, } + }, + { PINMUX_CFG_REG_VAR("MOD_SEL", 0xE6060090, 32, + 3, 2, 2, 3, 2, 1, 1, 1, 2, 1, + 2, 1, 1, 1, 1, 2, 1, 1, 2, 1, 1) { + /* SEL_SCIF1 [3] */ + FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, FN_SEL_SCIF1_3, + FN_SEL_SCIF1_4, 0, 0, 0, + /* SEL_SCIFB [2] */ + FN_SEL_SCIFB_0, FN_SEL_SCIFB_1, FN_SEL_SCIFB_2, 0, + /* SEL_SCIFB2 [2] */ + FN_SEL_SCIFB2_0, FN_SEL_SCIFB2_1, FN_SEL_SCIFB2_2, 0, + /* SEL_SCIFB1 [3] */ + FN_SEL_SCIFB1_0, FN_SEL_SCIFB1_1, FN_SEL_SCIFB1_2, + FN_SEL_SCIFB1_3, FN_SEL_SCIFB1_4, FN_SEL_SCIFB1_5, + FN_SEL_SCIFB1_6, 0, + /* SEL_SCIFA1 [2] */ + FN_SEL_SCIFA1_0, FN_SEL_SCIFA1_1, FN_SEL_SCIFA1_2, + FN_SEL_SCIFA1_3, + /* SEL_SCIF0 [1] */ + FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, + /* SEL_SCIFA [1] */ + FN_SEL_SCFA_0, FN_SEL_SCFA_1, + /* SEL_SOF1 [1] */ + FN_SEL_SOF1_0, FN_SEL_SOF1_1, + /* SEL_SSI7 [2] */ + FN_SEL_SSI7_0, FN_SEL_SSI7_1, FN_SEL_SSI7_2, 0, + /* SEL_SSI6 [1] */ + FN_SEL_SSI6_0, FN_SEL_SSI6_1, + /* SEL_SSI5 [2] */ + FN_SEL_SSI5_0, FN_SEL_SSI5_1, FN_SEL_SSI5_2, 0, + /* SEL_VI3 [1] */ + FN_SEL_VI3_0, FN_SEL_VI3_1, + /* SEL_VI2 [1] */ + FN_SEL_VI2_0, FN_SEL_VI2_1, + /* SEL_VI1 [1] */ + FN_SEL_VI1_0, FN_SEL_VI1_1, + /* SEL_VI0 [1] */ + FN_SEL_VI0_0, FN_SEL_VI0_1, + /* SEL_TSIF1 [2] */ + FN_SEL_TSIF1_0, FN_SEL_TSIF1_1, FN_SEL_TSIF1_2, 0, + /* RESERVED [1] */ + 0, 0, + /* SEL_LBS [1] */ + FN_SEL_LBS_0, FN_SEL_LBS_1, + /* SEL_TSIF0 [2] */ + FN_SEL_TSIF0_0, FN_SEL_TSIF0_1, FN_SEL_TSIF0_2, FN_SEL_TSIF0_3, + /* SEL_SOF3 [1] */ + FN_SEL_SOF3_0, FN_SEL_SOF3_1, + /* SEL_SOF0 [1] */ + FN_SEL_SOF0_0, FN_SEL_SOF0_1, } + }, + { PINMUX_CFG_REG_VAR("MOD_SEL2", 0xE6060094, 32, + 2, 1, 1, 1, 1, 2, 1, 2, 1, + 2, 1, 1, 1, 3, 3, 2, 3, 2, 2) { + /* RESEVED [2] */ + 0, 0, 0, 0, 0, 0, 0, 0, + /* RESEVED [1] */ + 0, 0, + /* SEL_TMU1 [1] */ + FN_SEL_TMU1_0, FN_SEL_TMU1_1, + /* SEL_HSCIF1 [1] */ + FN_SEL_HSCIF1_0, FN_SEL_HSCIF1_1, + /* SEL_SCIFCLK [1] */ + FN_SEL_SCIFCLK_0, FN_SEL_SCIFCLK_1, + /* SEL_CAN0 [2] */ + FN_SEL_CAN0_0, FN_SEL_CAN0_1, FN_SEL_CAN0_2, FN_SEL_CAN0_3, + /* SEL_CANCLK [1] */ + FN_SEL_CANCLK_0, FN_SEL_CANCLK_1, + /* SEL_SCIFA2 [2] */ + FN_SEL_SCIFA2_0, FN_SEL_SCIFA2_1, FN_SEL_SCIFA2_2, 0, + /* SEL_CAN1 [1] */ + FN_SEL_CAN1_0, FN_SEL_CAN1_1, + /* RESEVED [2] */ + 0, 0, 0, 0, 0, 0, 0, 0, + /* RESEVED [1] */ + 0, 0, + /* SEL_ADI [1] */ + FN_SEL_ADI_0, FN_SEL_ADI_1, + /* SEL_SSP [1] */ + FN_SEL_SSP_0, FN_SEL_SSP_1, + /* SEL_FM [3] */ + FN_SEL_FM_0, FN_SEL_FM_1, FN_SEL_FM_2, FN_SEL_FM_3, + FN_SEL_FM_4, FN_SEL_FM_5, FN_SEL_FM_6, 0, + /* SEL_HSCIF0 [3] */ + FN_SEL_HSCIF0_0, FN_SEL_HSCIF0_1, FN_SEL_HSCIF0_2, + FN_SEL_HSCIF0_3, FN_SEL_HSCIF0_4, FN_SEL_HSCIF0_5, 0, 0, + /* SEL_GPS [2] */ + FN_SEL_GPS_0, FN_SEL_GPS_1, FN_SEL_GPS_2, 0, + /* SEL_RDS [3] */ + FN_SEL_RDS_0, FN_SEL_RDS_1, FN_SEL_RDS_2, + FN_SEL_RDS_3, FN_SEL_RDS_4, FN_SEL_RDS_5, 0, 0, + /* SEL_SIM [2] */ + FN_SEL_SIM_0, FN_SEL_SIM_1, FN_SEL_SIM_2, 0, + /* SEL_SSI8 [2] */ + FN_SEL_SSI8_0, FN_SEL_SSI8_1, FN_SEL_SSI8_2, 0, } + }, + { PINMUX_CFG_REG_VAR("MOD_SEL3", 0xE6060098, 32, + 1, 1, 2, 4, 4, 2, 2, + 4, 2, 3, 2, 3, 2) { + /* SEL_IICDVFS [1] */ + FN_SEL_IICDVFS_0, FN_SEL_IICDVFS_1, + /* SEL_IIC0 [1] */ + FN_SEL_IIC0_0, FN_SEL_IIC0_1, + /* RESEVED [2] */ + 0, 0, 0, 0, + /* RESEVED [4] */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + /* RESEVED [4] */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + /* RESEVED [2] */ + 0, 0, 0, 0, + /* SEL_IEB [2] */ + FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2, 0, + /* RESEVED [4] */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + /* RESEVED [2] */ + 0, 0, 0, 0, + /* SEL_IIC2 [3] */ + FN_SEL_IIC2_0, FN_SEL_IIC2_1, FN_SEL_IIC2_2, FN_SEL_IIC2_3, + FN_SEL_IIC2_4, 0, 0, 0, + /* SEL_IIC1 [2] */ + FN_SEL_IIC1_0, FN_SEL_IIC1_1, FN_SEL_IIC1_2, 0, + /* SEL_I2C2 [3] */ + FN_SEL_I2C2_0, FN_SEL_I2C2_1, FN_SEL_I2C2_2, FN_SEL_I2C2_3, + FN_SEL_I2C2_4, 0, 0, 0, + /* SEL_I2C1 [2] */ + FN_SEL_I2C1_0, FN_SEL_I2C1_1, FN_SEL_I2C1_2, 0, } + }, { PINMUX_CFG_REG("INOUTSEL0", 0xE6050004, 32, 1) { GP_INOUTSEL(0) } }, { PINMUX_CFG_REG("INOUTSEL1", 0xE6051004, 32, 1) { 0, 0, @@ -813,7 +1798,7 @@ static struct pinmux_info r8a7790_pinmux_info = { .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, .first_gpio = GPIO_GP_0_0, - .last_gpio = GPIO_FN_MII_RXD2 /* GPIO_FN_TCLK1_B */, + .last_gpio = GPIO_FN_MOUT0, .gpios = pinmux_gpios, .cfg_regs = pinmux_config_regs, diff --git a/arch/arm/cpu/armv7/rmobile/pfc-r8a7794.c b/arch/arm/cpu/armv7/rmobile/pfc-r8a7794.c index e123663333..7ea5edc2e5 100644 --- a/arch/arm/cpu/armv7/rmobile/pfc-r8a7794.c +++ b/arch/arm/cpu/armv7/rmobile/pfc-r8a7794.c @@ -151,8 +151,18 @@ enum { FN_IP0_9_8, FN_IP0_10, FN_IP0_11, FN_IP0_12, FN_IP0_13, FN_IP0_14, FN_IP0_15, FN_IP0_16, FN_IP0_17, FN_IP0_19_18, FN_IP0_21_20, + /* IPSR0 */ + FN_SD1_CD, FN_CAN0_RX, FN_SD1_WP, FN_IRQ7, FN_CAN0_TX, FN_MMC_CLK, + FN_SD2_CLK, FN_MMC_CMD, FN_SD2_CMD, FN_MMC_D0, FN_SD2_DATA0, FN_MMC_D1, + FN_SD2_DATA1, FN_MMC_D2, FN_SD2_DATA2, FN_MMC_D3, FN_SD2_DATA3, + FN_MMC_D4, FN_SD2_CD, FN_MMC_D5, FN_SD2_WP, FN_MMC_D6, FN_SCIF0_RXD, + FN_I2C2_SCL_B, FN_CAN1_RX, FN_MMC_D7, FN_SCIF0_TXD, FN_I2C2_SDA_B, + FN_CAN1_TX, FN_D0, FN_SCIFA3_SCK_B, FN_IRQ4, FN_D1, FN_SCIFA3_RXD_B, + FN_D2, FN_SCIFA3_TXD_B, FN_D3, FN_I2C3_SCL_B, FN_SCIF5_RXD_B, FN_D4, + FN_I2C3_SDA_B, FN_SCIF5_TXD_B, FN_D5, FN_SCIF4_RXD_B, FN_I2C0_SCL_D, + /* - * From IPSR0 to IPSR5 have been removed because they does not use. + * From IPSR1 to IPSR5 have been removed because they does not use. */ /* IPSR6 */ @@ -285,8 +295,20 @@ enum { SD1_CLK_MARK, SD1_CMD_MARK, SD1_DATA0_MARK, SD1_DATA1_MARK, SD1_DATA2_MARK, SD1_DATA3_MARK, + /* IPSR0 */ + SD1_CD_MARK, CAN0_RX_MARK, SD1_WP_MARK, IRQ7_MARK, CAN0_TX_MARK, + MMC_CLK_MARK, SD2_CLK_MARK, MMC_CMD_MARK, SD2_CMD_MARK, MMC_D0_MARK, + SD2_DATA0_MARK, MMC_D1_MARK, SD2_DATA1_MARK, MMC_D2_MARK, + SD2_DATA2_MARK, MMC_D3_MARK, SD2_DATA3_MARK, MMC_D4_MARK, SD2_CD_MARK, + MMC_D5_MARK, SD2_WP_MARK, MMC_D6_MARK, SCIF0_RXD_MARK, I2C2_SCL_B_MARK, + CAN1_RX_MARK, MMC_D7_MARK, SCIF0_TXD_MARK, I2C2_SDA_B_MARK, + CAN1_TX_MARK, D0_MARK, SCIFA3_SCK_B_MARK, IRQ4_MARK, D1_MARK, + SCIFA3_RXD_B_MARK, D2_MARK, SCIFA3_TXD_B_MARK, D3_MARK, I2C3_SCL_B_MARK, + SCIF5_RXD_B_MARK, D4_MARK, I2C3_SDA_B_MARK, SCIF5_TXD_B_MARK, D5_MARK, + SCIF4_RXD_B_MARK, I2C0_SCL_D_MARK, + /* - * From IPSR0 to IPSR5 have been removed because they does not use. + * From IPSR1 to IPSR5 have been removed because they does not use. */ /* IPSR6 */ @@ -399,8 +421,55 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(SD1_DATA2_MARK, FN_SD1_DATA2), PINMUX_DATA(SD1_DATA3_MARK, FN_SD1_DATA3), + /* IPSR0 */ + PINMUX_IPSR_DATA(IP0_0, SD1_CD), + PINMUX_IPSR_MODSEL_DATA(IP0_0, CAN0_RX, SEL_CAN0_0), + PINMUX_IPSR_DATA(IP0_9_8, SD1_WP), + PINMUX_IPSR_DATA(IP0_9_8, IRQ7), + PINMUX_IPSR_MODSEL_DATA(IP0_9_8, CAN0_TX, SEL_CAN0_0), + PINMUX_IPSR_DATA(IP0_10, MMC_CLK), + PINMUX_IPSR_DATA(IP0_10, SD2_CLK), + PINMUX_IPSR_DATA(IP0_11, MMC_CMD), + PINMUX_IPSR_DATA(IP0_11, SD2_CMD), + PINMUX_IPSR_DATA(IP0_12, MMC_D0), + PINMUX_IPSR_DATA(IP0_12, SD2_DATA0), + PINMUX_IPSR_DATA(IP0_13, MMC_D1), + PINMUX_IPSR_DATA(IP0_13, SD2_DATA1), + PINMUX_IPSR_DATA(IP0_14, MMC_D2), + PINMUX_IPSR_DATA(IP0_14, SD2_DATA2), + PINMUX_IPSR_DATA(IP0_15, MMC_D3), + PINMUX_IPSR_DATA(IP0_15, SD2_DATA3), + PINMUX_IPSR_DATA(IP0_16, MMC_D4), + PINMUX_IPSR_DATA(IP0_16, SD2_CD), + PINMUX_IPSR_DATA(IP0_17, MMC_D5), + PINMUX_IPSR_DATA(IP0_17, SD2_WP), + PINMUX_IPSR_DATA(IP0_19_18, MMC_D6), + PINMUX_IPSR_MODSEL_DATA(IP0_19_18, SCIF0_RXD, SEL_SCIF0_0), + PINMUX_IPSR_MODSEL_DATA(IP0_19_18, I2C2_SCL_B, SEL_I2C02_1), + PINMUX_IPSR_MODSEL_DATA(IP0_19_18, CAN1_RX, SEL_CAN1_0), + PINMUX_IPSR_DATA(IP0_21_20, MMC_D7), + PINMUX_IPSR_MODSEL_DATA(IP0_21_20, SCIF0_TXD, SEL_SCIF0_0), + PINMUX_IPSR_MODSEL_DATA(IP0_21_20, I2C2_SDA_B, SEL_I2C02_1), + PINMUX_IPSR_MODSEL_DATA(IP0_21_20, CAN1_TX, SEL_CAN1_0), + PINMUX_IPSR_DATA(IP0_23_22, D0), + PINMUX_IPSR_MODSEL_DATA(IP0_23_22, SCIFA3_SCK_B, SEL_SCIFA3_1), + PINMUX_IPSR_DATA(IP0_23_22, IRQ4), + PINMUX_IPSR_DATA(IP0_24, D1), + PINMUX_IPSR_MODSEL_DATA(IP0_24, SCIFA3_RXD_B, SEL_SCIFA3_1), + PINMUX_IPSR_DATA(IP0_25, D2), + PINMUX_IPSR_MODSEL_DATA(IP0_25, SCIFA3_TXD_B, SEL_SCIFA3_1), + PINMUX_IPSR_DATA(IP0_27_26, D3), + PINMUX_IPSR_MODSEL_DATA(IP0_27_26, I2C3_SCL_B, SEL_I2C03_1), + PINMUX_IPSR_MODSEL_DATA(IP0_27_26, SCIF5_RXD_B, SEL_SCIF5_1), + PINMUX_IPSR_DATA(IP0_29_28, D4), + PINMUX_IPSR_MODSEL_DATA(IP0_29_28, I2C3_SDA_B, SEL_I2C03_1), + PINMUX_IPSR_MODSEL_DATA(IP0_29_28, SCIF5_TXD_B, SEL_SCIF5_1), + PINMUX_IPSR_DATA(IP0_31_30, D5), + PINMUX_IPSR_MODSEL_DATA(IP0_31_30, SCIF4_RXD_B, SEL_SCIF4_1), + PINMUX_IPSR_MODSEL_DATA(IP0_31_30, I2C0_SCL_D, SEL_I2C00_3), + /* - * From IPSR0 to IPSR5 have been removed because they does not use. + * From IPSR1 to IPSR5 have been removed because they does not use. */ /* IPSR6 */ @@ -674,8 +743,23 @@ static struct pinmux_gpio pinmux_gpios[] = { GPIO_FN(SD1_CLK), GPIO_FN(SD1_CMD), GPIO_FN(SD1_DATA0), GPIO_FN(SD1_DATA1), GPIO_FN(SD1_DATA2), GPIO_FN(SD1_DATA3), + /* IPSR0 */ + GPIO_FN(SD1_CD), GPIO_FN(CAN0_RX), GPIO_FN(SD1_WP), GPIO_FN(IRQ7), + GPIO_FN(CAN0_TX), GPIO_FN(MMC_CLK), GPIO_FN(SD2_CLK), GPIO_FN(MMC_CMD), + GPIO_FN(SD2_CMD), GPIO_FN(MMC_D0), GPIO_FN(SD2_DATA0), GPIO_FN(MMC_D1), + GPIO_FN(SD2_DATA1), GPIO_FN(MMC_D2), GPIO_FN(SD2_DATA2), + GPIO_FN(MMC_D3), GPIO_FN(SD2_DATA3), GPIO_FN(MMC_D4), + GPIO_FN(SD2_CD), GPIO_FN(MMC_D5), GPIO_FN(SD2_WP), GPIO_FN(MMC_D6), + GPIO_FN(SCIF0_RXD), GPIO_FN(I2C2_SCL_B), GPIO_FN(CAN1_RX), + GPIO_FN(MMC_D7), GPIO_FN(SCIF0_TXD), GPIO_FN(I2C2_SDA_B), + GPIO_FN(CAN1_TX), GPIO_FN(D0), GPIO_FN(SCIFA3_SCK_B), GPIO_FN(IRQ4), + GPIO_FN(D1), GPIO_FN(SCIFA3_RXD_B), GPIO_FN(D2), GPIO_FN(SCIFA3_TXD_B), + GPIO_FN(D3), GPIO_FN(I2C3_SCL_B), GPIO_FN(SCIF5_RXD_B), GPIO_FN(D4), + GPIO_FN(I2C3_SDA_B), GPIO_FN(SCIF5_TXD_B), GPIO_FN(D5), + GPIO_FN(SCIF4_RXD_B), GPIO_FN(I2C0_SCL_D), + /* - * From IPSR0 to IPSR5 have been removed because they does not use + * From IPSR1 to IPSR5 have been removed because they does not use. */ /* IPSR6 */ @@ -1017,9 +1101,63 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = { GP_6_1_FN, FN_SD0_CMD, GP_6_0_FN, FN_SD0_CLK } }, + { PINMUX_CFG_REG_VAR("IPSR0", 0xE6060020, 32, + 2, 2, 2, 1, 1, 2, 2, 2, 1, 1, 1, 1, 1, 1, 1, 1, + 2, 1, 1, 1, 1, 1, 1, 1, 1) { + /* IP0_31_30 [2] */ + FN_D5, FN_SCIF4_RXD_B, FN_I2C0_SCL_D, 0, + /* IP0_29_28 [2] */ + FN_D4, FN_I2C3_SDA_B, FN_SCIF5_TXD_B, 0, + /* IP0_27_26 [2] */ + FN_D3, FN_I2C3_SCL_B, FN_SCIF5_RXD_B, 0, + /* IP0_25 [1] */ + FN_D2, FN_SCIFA3_TXD_B, + /* IP0_24 [1] */ + FN_D1, FN_SCIFA3_RXD_B, + /* IP0_23_22 [2] */ + FN_D0, FN_SCIFA3_SCK_B, FN_IRQ4, 0, + /* IP0_21_20 [2] */ + FN_MMC_D7, FN_SCIF0_TXD, FN_I2C2_SDA_B, FN_CAN1_TX, + /* IP0_19_18 [2] */ + FN_MMC_D6, FN_SCIF0_RXD, FN_I2C2_SCL_B, FN_CAN1_RX, + /* IP0_17 [1] */ + FN_MMC_D5, FN_SD2_WP, + /* IP0_16 [1] */ + FN_MMC_D4, FN_SD2_CD, + /* IP0_15 [1] */ + FN_MMC_D3, FN_SD2_DATA3, + /* IP0_14 [1] */ + FN_MMC_D2, FN_SD2_DATA2, + /* IP0_13 [1] */ + FN_MMC_D1, FN_SD2_DATA1, + /* IP0_12 [1] */ + FN_MMC_D0, FN_SD2_DATA0, + /* IP0_11 [1] */ + FN_MMC_CMD, FN_SD2_CMD, + /* IP0_10 [1] */ + FN_MMC_CLK, FN_SD2_CLK, + /* IP0_9_8 [2] */ + FN_SD1_WP, FN_IRQ7, FN_CAN0_TX, 0, + /* IP0_7 [1] */ + 0, 0, + /* IP0_6 [1] */ + 0, 0, + /* IP0_5 [1] */ + 0, 0, + /* IP0_4 [1] */ + 0, 0, + /* IP0_3 [1] */ + 0, 0, + /* IP0_2 [1] */ + 0, 0, + /* IP0_1 [1] */ + 0, 0, + /* IP0_0 [1] */ + FN_SD1_CD, FN_CAN0_RX, } + }, /* - * From IPSR0 to IPSR5 have been removed because they does not use. + * From IPSR1 to IPSR5 have been removed because they does not use. */ { PINMUX_CFG_REG_VAR("IPSR6", 0xE6060038, 32, diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig deleted file mode 100644 index 8335685e32..0000000000 --- a/arch/arm/cpu/armv7/uniphier/Kconfig +++ /dev/null @@ -1,89 +0,0 @@ -menu "Panasonic UniPhier platform" - depends on ARCH_UNIPHIER - -config SYS_SOC - default "uniphier" - -config SYS_CONFIG_NAME - default "uniphier" - -config UNIPHIER_SMP - bool - -choice - prompt "UniPhier SoC select" - -config MACH_PH1_PRO4 - bool "PH1-Pro4" - select UNIPHIER_SMP - -config MACH_PH1_LD4 - bool "PH1-LD4" - -config MACH_PH1_SLD8 - bool "PH1-sLD8" - -endchoice - -choice - prompt "UniPhier Support Card select" - optional - -config PFC_MICRO_SUPPORT_CARD - bool "Support card with PFC CPLD" - help - This option provides support for the expansion board with PFC - original address mapping. - - Say Y to use the on-board UART, Ether, LED devices. - -config DCC_MICRO_SUPPORT_CARD - bool "Support card with DCC CPLD" - help - This option provides support for the expansion board with DCC- - arranged address mapping that is compatible with legacy UniPhier - reference boards. - - Say Y to use the on-board UART, Ether, LED devices. - -endchoice - -config SYS_MALLOC_F - default y - -config SYS_MALLOC_F_LEN - default 0x400 - -config CMD_PINMON - bool "Enable boot mode pins monitor command" - default y - help - The command "pinmon" shows the state of the boot mode pins. - The boot mode pins are latched when the system reset is deasserted - and determine which device the system should load a boot image from. - -config CMD_DDRPHY_DUMP - bool "Enable dump command of DDR PHY parameters" - help - The command "ddrphy" shows the resulting parameters of DDR PHY - training; it is useful for the evaluation of DDR PHY training. - -choice - prompt "DDR3 Frequency select" - -config DDR_FREQ_1600 - bool "DDR3 1600" - depends on MACH_PH1_PRO4 || MACH_PH1_LD4 - -config DDR_FREQ_1333 - bool "DDR3 1333" - depends on MACH_PH1_LD4 || MACH_PH1_SLD8 - -endchoice - -config DDR_FREQ - int - default 1333 if DDR_FREQ_1333 - default 1600 if DDR_FREQ_1600 - -endmenu diff --git a/arch/arm/cpu/armv7/uniphier/Makefile b/arch/arm/cpu/armv7/uniphier/Makefile deleted file mode 100644 index df418dd3c4..0000000000 --- a/arch/arm/cpu/armv7/uniphier/Makefile +++ /dev/null @@ -1,36 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD - -obj-y += lowlevel_init.o -obj-y += init_page_table.o -obj-y += spl.o -obj-y += ddrphy_training.o - -else - -obj-$(CONFIG_BOARD_EARLY_INIT_F) += board_early_init_f.o -obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o -obj-$(CONFIG_MISC_INIT_F) += print_misc_info.o -obj-y += dram_init.o -obj-y += board_common.o -obj-$(CONFIG_BOARD_EARLY_INIT_R) += board_early_init_r.o -obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o -obj-y += reset.o -obj-y += cache_uniphier.o -obj-$(CONFIG_UNIPHIER_SMP) += smp.o -obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o -obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o - -endif - -obj-y += timer.o - -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += support_card.o - -obj-$(CONFIG_MACH_PH1_LD4) += ph1-ld4/ -obj-$(CONFIG_MACH_PH1_PRO4) += ph1-pro4/ -obj-$(CONFIG_MACH_PH1_SLD8) += ph1-sld8/ diff --git a/arch/arm/cpu/armv7/uniphier/board_common.c b/arch/arm/cpu/armv7/uniphier/board_common.c deleted file mode 100644 index 3fb26c6d84..0000000000 --- a/arch/arm/cpu/armv7/uniphier/board_common.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/led.h> - -/* - * Routine: board_init - * Description: Early hardware init. - */ -int board_init(void) -{ - led_write(U, B, O, O); - - return 0; -} - -#if CONFIG_NR_DRAM_BANKS >= 2 -void dram_init_banksize(void) -{ - DECLARE_GLOBAL_DATA_PTR; - - gd->bd->bi_dram[0].start = CONFIG_SDRAM0_BASE; - gd->bd->bi_dram[0].size = CONFIG_SDRAM0_SIZE; - gd->bd->bi_dram[1].start = CONFIG_SDRAM1_BASE; - gd->bd->bi_dram[1].size = CONFIG_SDRAM1_SIZE; -} -#endif diff --git a/arch/arm/cpu/armv7/uniphier/board_early_init_f.c b/arch/arm/cpu/armv7/uniphier/board_early_init_f.c deleted file mode 100644 index d25bbaec08..0000000000 --- a/arch/arm/cpu/armv7/uniphier/board_early_init_f.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2012-2015 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/arch/led.h> -#include <asm/arch/board.h> - -void pin_init(void); - -int board_early_init_f(void) -{ - led_write(U, 0, , ); - - pin_init(); - - led_write(U, 1, , ); - - return 0; -} diff --git a/arch/arm/cpu/armv7/uniphier/board_early_init_r.c b/arch/arm/cpu/armv7/uniphier/board_early_init_r.c deleted file mode 100644 index cb7e04fc36..0000000000 --- a/arch/arm/cpu/armv7/uniphier/board_early_init_r.c +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/board.h> - -int board_early_init_r(void) -{ - uniphier_board_late_init(); - return 0; -} diff --git a/arch/arm/cpu/armv7/uniphier/board_late_init.c b/arch/arm/cpu/armv7/uniphier/board_late_init.c deleted file mode 100644 index 0622a1e16e..0000000000 --- a/arch/arm/cpu/armv7/uniphier/board_late_init.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <spl.h> -#include <nand.h> -#include <asm/io.h> -#include <../drivers/mtd/nand/denali.h> - -static void nand_denali_wp_disable(void) -{ -#ifdef CONFIG_NAND_DENALI - /* - * Since the boot rom enables the write protection for NAND boot mode, - * it must be disabled somewhere for "nand write", "nand erase", etc. - * The workaround is here to not disturb the Denali NAND controller - * driver just for a really SoC-specific thing. - */ - void __iomem *denali_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE; - - writel(WRITE_PROTECT__FLAG, denali_reg + WRITE_PROTECT); -#endif -} - -int board_late_init(void) -{ - puts("MODE: "); - - switch (spl_boot_device()) { - case BOOT_DEVICE_MMC1: - printf("eMMC Boot\n"); - setenv("bootmode", "emmcboot"); - break; - case BOOT_DEVICE_NAND: - printf("NAND Boot\n"); - setenv("bootmode", "nandboot"); - nand_denali_wp_disable(); - break; - case BOOT_DEVICE_NOR: - printf("NOR Boot\n"); - setenv("bootmode", "norboot"); - break; - default: - printf("Unsupported Boot Mode\n"); - return -1; - } - - return 0; -} diff --git a/arch/arm/cpu/armv7/uniphier/cache_uniphier.c b/arch/arm/cpu/armv7/uniphier/cache_uniphier.c deleted file mode 100644 index e47f977fe5..0000000000 --- a/arch/arm/cpu/armv7/uniphier/cache_uniphier.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/armv7.h> -#include <asm/arch/ssc-regs.h> - -#ifdef CONFIG_UNIPHIER_L2CACHE_ON -static void uniphier_cache_maint_all(u32 operation) -{ - /* try until the command is successfully set */ - do { - writel(SSCOQM_S_ALL | SSCOQM_CE | operation, SSCOQM); - } while (readl(SSCOPPQSEF) & (SSCOPPQSEF_FE | SSCOPPQSEF_OE)); - - /* wait until the operation is completed */ - while (readl(SSCOLPQS) != SSCOLPQS_EF) - ; - - /* clear the complete notification flag */ - writel(SSCOLPQS_EF, SSCOLPQS); - - writel(SSCOPE_CM_SYNC, SSCOPE); /* drain internal buffers */ - readl(SSCOPE); /* need a read back to confirm */ -} - -void v7_outer_cache_flush_all(void) -{ - uniphier_cache_maint_all(SSCOQM_CM_WB_INV); -} - -void v7_outer_cache_inval_all(void) -{ - uniphier_cache_maint_all(SSCOQM_CM_INV); -} - -static void __uniphier_cache_maint_range(u32 start, u32 size, u32 operation) -{ - /* try until the command is successfully set */ - do { - writel(SSCOQM_S_ADDRESS | SSCOQM_CE | operation, SSCOQM); - writel(start, SSCOQAD); - writel(size, SSCOQSZ); - - } while (readl(SSCOPPQSEF) & (SSCOPPQSEF_FE | SSCOPPQSEF_OE)); - - /* wait until the operation is completed */ - while (readl(SSCOLPQS) != SSCOLPQS_EF) - ; - - /* clear the complete notification flag */ - writel(SSCOLPQS_EF, SSCOLPQS); -} - -static void uniphier_cache_maint_range(u32 start, u32 end, u32 operation) -{ - u32 size; - - /* - * If start address is not aligned to cache-line, - * do cache operation for the first cache-line - */ - start = start & ~(SSC_LINE_SIZE - 1); - - if (start == 0 && end >= (u32)(-SSC_LINE_SIZE)) { - /* this means cache operation for all range */ - uniphier_cache_maint_all(operation); - return; - } - - /* - * If end address is not aligned to cache-line, - * do cache operation for the last cache-line - */ - size = (end - start + SSC_LINE_SIZE - 1) & ~(SSC_LINE_SIZE - 1); - - while (size) { - u32 chunk_size = size > SSC_RANGE_OP_MAX_SIZE ? - SSC_RANGE_OP_MAX_SIZE : size; - __uniphier_cache_maint_range(start, chunk_size, operation); - - start += chunk_size; - size -= chunk_size; - } - - writel(SSCOPE_CM_SYNC, SSCOPE); /* drain internal buffers */ - readl(SSCOPE); /* need a read back to confirm */ -} - -void v7_outer_cache_flush_range(u32 start, u32 end) -{ - uniphier_cache_maint_range(start, end, SSCOQM_CM_WB_INV); -} - -void v7_outer_cache_inval_range(u32 start, u32 end) -{ - uniphier_cache_maint_range(start, end, SSCOQM_CM_INV); -} - -void v7_outer_cache_enable(void) -{ - u32 tmp; - tmp = readl(SSCC); - tmp |= SSCC_ON; - writel(tmp, SSCC); -} -#endif - -void v7_outer_cache_disable(void) -{ - u32 tmp; - tmp = readl(SSCC); - tmp &= ~SSCC_ON; - writel(tmp, SSCC); -} - -void wakeup_secondary(void); - -void enable_caches(void) -{ - uint32_t reg; - -#ifdef CONFIG_UNIPHIER_SMP - /* - * The secondary CPU must move to DDR, - * before L2 disable. - * On SPL, the Page Table is located on the L2. - */ - wakeup_secondary(); -#endif - /* - * UniPhier SoCs must use L2 cache for init stack pointer. - * We disable L2 and L1 in this order. - * If CONFIG_SYS_DCACHE_OFF is not defined, - * caches are enabled again with a new page table. - */ - - /* L2 disable */ - v7_outer_cache_disable(); - - /* L1 disable */ - reg = get_cr(); - reg &= ~(CR_C | CR_M); - set_cr(reg); - -#ifndef CONFIG_SYS_DCACHE_OFF - dcache_enable(); -#endif -} diff --git a/arch/arm/cpu/armv7/uniphier/cmd_ddrphy.c b/arch/arm/cpu/armv7/uniphier/cmd_ddrphy.c deleted file mode 100644 index 431d9010f1..0000000000 --- a/arch/arm/cpu/armv7/uniphier/cmd_ddrphy.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/ddrphy-regs.h> - -/* Select either decimal or hexadecimal */ -#if 1 -#define PRINTF_FORMAT "%2d" -#else -#define PRINTF_FORMAT "%02x" -#endif -/* field separator */ -#define FS " " - -static u32 read_bdl(struct ddrphy_datx8 __iomem *dx, int index) -{ - return (readl(&dx->bdlr[index / 5]) >> (index % 5 * 6)) & 0x3f; -} - -static void dump_loop(void (*callback)(struct ddrphy_datx8 __iomem *)) -{ - int ch, p, dx; - struct ddrphy __iomem *phy; - - for (ch = 0; ch < NR_DDRCH; ch++) { - for (p = 0; p < NR_DDRPHY_PER_CH; p++) { - phy = (struct ddrphy __iomem *)DDRPHY_BASE(ch, p); - - for (dx = 0; dx < NR_DATX8_PER_DDRPHY; dx++) { - printf("CH%dP%dDX%d:", ch, p, dx); - (*callback)(&phy->dx[dx]); - printf("\n"); - } - } - } -} - -static void __wbdl_dump(struct ddrphy_datx8 __iomem *dx) -{ - int i; - - for (i = 0; i < 10; i++) - printf(FS PRINTF_FORMAT, read_bdl(dx, i)); - - printf(FS "(+" PRINTF_FORMAT ")", readl(&dx->lcdlr[1]) & 0xff); -} - -void wbdl_dump(void) -{ - printf("\n--- Write Bit Delay Line ---\n"); - printf(" DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DM DQS (WDQD)\n"); - - dump_loop(&__wbdl_dump); -} - -static void __rbdl_dump(struct ddrphy_datx8 __iomem *dx) -{ - int i; - - for (i = 15; i < 24; i++) - printf(FS PRINTF_FORMAT, read_bdl(dx, i)); - - printf(FS "(+" PRINTF_FORMAT ")", (readl(&dx->lcdlr[1]) >> 8) & 0xff); -} - -void rbdl_dump(void) -{ - printf("\n--- Read Bit Delay Line ---\n"); - printf(" DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DM (RDQSD)\n"); - - dump_loop(&__rbdl_dump); -} - -static void __wld_dump(struct ddrphy_datx8 __iomem *dx) -{ - int rank; - u32 lcdlr0 = readl(&dx->lcdlr[0]); - u32 gtr = readl(&dx->gtr); - - for (rank = 0; rank < 4; rank++) { - u32 wld = (lcdlr0 >> (8 * rank)) & 0xff; /* Delay */ - u32 wlsl = (gtr >> (12 + 2 * rank)) & 0x3; /* System Latency */ - - printf(FS PRINTF_FORMAT "%sT", wld, - wlsl == 0 ? "-1" : wlsl == 1 ? "+0" : "+1"); - } -} - -void wld_dump(void) -{ - printf("\n--- Write Leveling Delay ---\n"); - printf(" Rank0 Rank1 Rank2 Rank3\n"); - - dump_loop(&__wld_dump); -} - -static void __dqsgd_dump(struct ddrphy_datx8 __iomem *dx) -{ - int rank; - u32 lcdlr2 = readl(&dx->lcdlr[2]); - u32 gtr = readl(&dx->gtr); - - for (rank = 0; rank < 4; rank++) { - u32 dqsgd = (lcdlr2 >> (8 * rank)) & 0xff; /* Delay */ - u32 dgsl = (gtr >> (3 * rank)) & 0x7; /* System Latency */ - - printf(FS PRINTF_FORMAT "+%dT", dqsgd, dgsl); - } -} - -void dqsgd_dump(void) -{ - printf("\n--- DQS Gating Delay ---\n"); - printf(" Rank0 Rank1 Rank2 Rank3\n"); - - dump_loop(&__dqsgd_dump); -} - -static void __mdl_dump(struct ddrphy_datx8 __iomem *dx) -{ - int i; - u32 mdl = readl(&dx->mdlr); - for (i = 0; i < 3; i++) - printf(FS PRINTF_FORMAT, (mdl >> (8 * i)) & 0xff); -} - -void mdl_dump(void) -{ - printf("\n--- Master Delay Line ---\n"); - printf(" IPRD TPRD MDLD\n"); - - dump_loop(&__mdl_dump); -} - -#define REG_DUMP(x) \ - { u32 __iomem *p = &phy->x; printf("%3d: %-10s: %p : %08x\n", \ - p - (u32 *)phy, #x, p, readl(p)); } - -void reg_dump(void) -{ - int ch, p; - struct ddrphy __iomem *phy; - - printf("\n--- DDR PHY registers ---\n"); - - for (ch = 0; ch < NR_DDRCH; ch++) { - for (p = 0; p < NR_DDRPHY_PER_CH; p++) { - printf("== Ch%d, PHY%d ==\n", ch, p); - printf(" No: Name : Address : Data\n"); - - phy = (struct ddrphy __iomem *)DDRPHY_BASE(ch, p); - - REG_DUMP(ridr); - REG_DUMP(pir); - REG_DUMP(pgcr[0]); - REG_DUMP(pgcr[1]); - REG_DUMP(pgsr[0]); - REG_DUMP(pgsr[1]); - REG_DUMP(pllcr); - REG_DUMP(ptr[0]); - REG_DUMP(ptr[1]); - REG_DUMP(ptr[2]); - REG_DUMP(ptr[3]); - REG_DUMP(ptr[4]); - REG_DUMP(acmdlr); - REG_DUMP(acbdlr); - REG_DUMP(dxccr); - REG_DUMP(dsgcr); - REG_DUMP(dcr); - REG_DUMP(dtpr[0]); - REG_DUMP(dtpr[1]); - REG_DUMP(dtpr[2]); - REG_DUMP(mr0); - REG_DUMP(mr1); - REG_DUMP(mr2); - REG_DUMP(mr3); - REG_DUMP(dx[0].gcr); - REG_DUMP(dx[0].gtr); - REG_DUMP(dx[1].gcr); - REG_DUMP(dx[1].gtr); - } - } -} - -static int do_ddr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - char *cmd = argv[1]; - - if (argc == 1) - cmd = "all"; - - if (!strcmp(cmd, "wbdl") || !strcmp(cmd, "all")) - wbdl_dump(); - - if (!strcmp(cmd, "rbdl") || !strcmp(cmd, "all")) - rbdl_dump(); - - if (!strcmp(cmd, "wld") || !strcmp(cmd, "all")) - wld_dump(); - - if (!strcmp(cmd, "dqsgd") || !strcmp(cmd, "all")) - dqsgd_dump(); - - if (!strcmp(cmd, "mdl") || !strcmp(cmd, "all")) - mdl_dump(); - - if (!strcmp(cmd, "reg") || !strcmp(cmd, "all")) - reg_dump(); - - return 0; -} - -U_BOOT_CMD( - ddr, 2, 1, do_ddr, - "UniPhier DDR PHY parameters dumper", - "- dump all of the followings\n" - "ddr wbdl - dump Write Bit Delay\n" - "ddr rbdl - dump Read Bit Delay\n" - "ddr wld - dump Write Leveling\n" - "ddr dqsgd - dump DQS Gating Delay\n" - "ddr mdl - dump Master Delay Line\n" - "ddr reg - dump registers\n" -); diff --git a/arch/arm/cpu/armv7/uniphier/cmd_pinmon.c b/arch/arm/cpu/armv7/uniphier/cmd_pinmon.c deleted file mode 100644 index 3c1b325976..0000000000 --- a/arch/arm/cpu/armv7/uniphier/cmd_pinmon.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/boot-device.h> -#include <asm/arch/sbc-regs.h> - -static int do_pinmon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int mode_sel, i; - - printf("Boot Swap: %s\n\n", boot_is_swapped() ? "ON" : "OFF"); - - mode_sel = get_boot_mode_sel(); - - puts("Boot Mode Pin:\n"); - - for (i = 0; boot_device_table[i].info; i++) - printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, - boot_device_table[i].info); - - return 0; -} - -U_BOOT_CMD( - pinmon, 1, 1, do_pinmon, - "pin monitor", - "" -); diff --git a/arch/arm/cpu/armv7/uniphier/cpu_info.c b/arch/arm/cpu/armv7/uniphier/cpu_info.c deleted file mode 100644 index 86d079ad56..0000000000 --- a/arch/arm/cpu/armv7/uniphier/cpu_info.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (C) 2013-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sg-regs.h> - -int print_cpuinfo(void) -{ - u32 revision, type, model, rev, required_model = 1, required_rev = 1; - - revision = readl(SG_REVISION); - type = (revision & SG_REVISION_TYPE_MASK) >> SG_REVISION_TYPE_SHIFT; - model = (revision & SG_REVISION_MODEL_MASK) >> SG_REVISION_MODEL_SHIFT; - rev = (revision & SG_REVISION_REV_MASK) >> SG_REVISION_REV_SHIFT; - - puts("CPU: "); - - switch (type) { - case 0x25: - puts("PH1-sLD3 (MN2WS0220)"); - required_model = 2; - break; - case 0x26: - puts("PH1-LD4 (MN2WS0250)"); - required_rev = 2; - break; - case 0x28: - puts("PH1-Pro4 (MN2WS0230)"); - break; - case 0x29: - puts("PH1-sLD8 (MN2WS0270)"); - break; - default: - printf("Unknown Processor ID (0x%x)\n", revision); - return -1; - } - - if (model > 1) - printf(" model %d", model); - - printf(" (rev. %d)\n", rev); - - if (model < required_model) { - printf("Sorry, this model is not supported.\n"); - printf("Required model is %d.", required_model); - return -1; - } else if (rev < required_rev) { - printf("Sorry, this revision is not supported.\n"); - printf("Required revision is %d.", required_rev); - return -1; - } - - return 0; -} diff --git a/arch/arm/cpu/armv7/uniphier/ddrphy_training.c b/arch/arm/cpu/armv7/uniphier/ddrphy_training.c deleted file mode 100644 index cc8b8ad648..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ddrphy_training.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/ddrphy-regs.h> - -void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank) -{ - int dx; - u32 __iomem tmp, *p; - - for (dx = 0; dx < NR_DATX8_PER_DDRPHY; dx++) { - p = &phy->dx[dx].gcr; - - tmp = readl(p); - /* Specify the rank that should be write leveled */ - tmp &= ~DXGCR_WLRKEN_MASK; - tmp |= (1 << (DXGCR_WLRKEN_SHIFT + rank)) & DXGCR_WLRKEN_MASK; - writel(tmp, p); - } - - p = &phy->dtcr; - - tmp = readl(p); - /* Specify the rank used during data bit deskew and eye centering */ - tmp &= ~DTCR_DTRANK_MASK; - tmp |= (rank << DTCR_DTRANK_SHIFT) & DTCR_DTRANK_MASK; - /* Use Multi-Purpose Register for DQS gate training */ - tmp |= DTCR_DTMPR; - /* Specify the rank enabled for data-training */ - tmp &= ~DTCR_RNKEN_MASK; - tmp |= (1 << (DTCR_RNKEN_SHIFT + rank)) & DTCR_RNKEN_MASK; - writel(tmp, p); -} - -struct ddrphy_init_sequence { - char *description; - u32 init_flag; - u32 done_flag; - u32 err_flag; -}; - -static struct ddrphy_init_sequence init_sequence[] = { - { - "DRAM Initialization", - PIR_DRAMRST | PIR_DRAMINIT, - PGSR0_DIDONE, - PGSR0_DIERR - }, - { - "Write Leveling", - PIR_WL, - PGSR0_WLDONE, - PGSR0_WLERR - }, - { - "Read DQS Gate Training", - PIR_QSGATE, - PGSR0_QSGDONE, - PGSR0_QSGERR - }, - { - "Write Leveling Adjustment", - PIR_WLADJ, - PGSR0_WLADONE, - PGSR0_WLAERR - }, - { - "Read Bit Deskew", - PIR_RDDSKW, - PGSR0_RDDONE, - PGSR0_RDERR - }, - { - "Write Bit Deskew", - PIR_WRDSKW, - PGSR0_WDDONE, - PGSR0_WDERR - }, - { - "Read Eye Training", - PIR_RDEYE, - PGSR0_REDONE, - PGSR0_REERR - }, - { - "Write Eye Training", - PIR_WREYE, - PGSR0_WEDONE, - PGSR0_WEERR - } -}; - -int ddrphy_training(struct ddrphy __iomem *phy) -{ - int i; - u32 pgsr0; - u32 init_flag = PIR_INIT; - u32 done_flag = PGSR0_IDONE; - int timeout = 50000; /* 50 msec is long enough */ -#ifdef DISPLAY_ELAPSED_TIME - ulong start = get_timer(0); -#endif - - for (i = 0; i < ARRAY_SIZE(init_sequence); i++) { - init_flag |= init_sequence[i].init_flag; - done_flag |= init_sequence[i].done_flag; - } - - writel(init_flag, &phy->pir); - - do { - if (--timeout < 0) { -#ifndef CONFIG_SPL_BUILD - printf("%s: error: timeout during DDR training\n", - __func__); -#endif - return -1; - } - udelay(1); - pgsr0 = readl(&phy->pgsr[0]); - } while ((pgsr0 & done_flag) != done_flag); - - for (i = 0; i < ARRAY_SIZE(init_sequence); i++) { - if (pgsr0 & init_sequence[i].err_flag) { -#ifndef CONFIG_SPL_BUILD - printf("%s: error: %s failed\n", __func__, - init_sequence[i].description); -#endif - return -1; - } - } - -#ifdef DISPLAY_ELAPSED_TIME - printf("%s: info: elapsed time %ld msec\n", get_timer(start)); -#endif - - return 0; -} diff --git a/arch/arm/cpu/armv7/uniphier/dram_init.c b/arch/arm/cpu/armv7/uniphier/dram_init.c deleted file mode 100644 index 4b8c938b5e..0000000000 --- a/arch/arm/cpu/armv7/uniphier/dram_init.c +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2012-2015 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> - -int dram_init(void) -{ - DECLARE_GLOBAL_DATA_PTR; - gd->ram_size = CONFIG_SYS_SDRAM_SIZE; - - return 0; -} diff --git a/arch/arm/cpu/armv7/uniphier/init_page_table.S b/arch/arm/cpu/armv7/uniphier/init_page_table.S deleted file mode 100644 index 2638bcd779..0000000000 --- a/arch/arm/cpu/armv7/uniphier/init_page_table.S +++ /dev/null @@ -1,26 +0,0 @@ -#include <config.h> -#include <linux/linkage.h> - -/* page table */ -#define NR_SECTIONS 4096 -#define SECTION_SHIFT 20 -#define DEVICE 0x00002002 /* Non-shareable Device */ -#define NORMAL 0x0000000e /* Normal Memory Write-Back, No Write-Allocate */ - -#define TEXT_SECTION ((CONFIG_SPL_TEXT_BASE) >> (SECTION_SHIFT)) -#define STACK_SECTION ((CONFIG_SYS_INIT_SP_ADDR) >> (SECTION_SHIFT)) - - .section ".rodata" - .align 14 -ENTRY(init_page_table) - section = 0 - .rept NR_SECTIONS - .if section == TEXT_SECTION || section == STACK_SECTION - attr = NORMAL - .else - attr = DEVICE - .endif - .word (section << SECTION_SHIFT) | attr - section = section + 1 - .endr -END(init_page_table) diff --git a/arch/arm/cpu/armv7/uniphier/lowlevel_init.S b/arch/arm/cpu/armv7/uniphier/lowlevel_init.S deleted file mode 100644 index c208ab67a1..0000000000 --- a/arch/arm/cpu/armv7/uniphier/lowlevel_init.S +++ /dev/null @@ -1,163 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <linux/linkage.h> -#include <asm/system.h> -#include <asm/arch/led.h> -#include <asm/arch/arm-mpcore.h> -#include <asm/arch/sbc-regs.h> - -ENTRY(lowlevel_init) - mov r8, lr @ persevere link reg across call - - /* - * The UniPhier Boot ROM loads SPL code to the L2 cache. - * But CPUs can only do instruction fetch now because start.S has - * cleared C and M bits. - * First we need to turn on MMU and Dcache again to get back - * data access to L2. - */ - mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) - orr r0, r0, #(CR_C | CR_M) @ enable MMU and Dcache - mcr p15, 0, r0, c1, c0, 0 - -#ifdef CONFIG_DEBUG_LL - bl setup_lowlevel_debug -#endif - - /* - * Now we are using the page table embedded in the Boot ROM. - * It is not handy since it is not a straight mapped table for sLD3. - * What we need to do next is to switch over to the page table in SPL. - */ - ldr r3, =init_page_table @ page table must be 16KB aligned - - /* Disable MMU and Dcache before switching Page Table */ - mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) - bic r0, r0, #(CR_C | CR_M) @ disable MMU and Dcache - mcr p15, 0, r0, c1, c0, 0 - - bl enable_mmu - -#ifdef CONFIG_UNIPHIER_SMP - /* - * ACTLR (Auxiliary Control Register) for Cortex-A9 - * bit[9] Parity on - * bit[8] Alloc in one way - * bit[7] EXCL (Exclusive cache bit) - * bit[6] SMP - * bit[3] Write full line of zeros mode - * bit[2] L1 Prefetch enable - * bit[1] L2 prefetch enable - * bit[0] FW (Cache and TLB maintenance broadcast) - */ - mrc p15, 0, r0, c1, c0, 1 @ ACTLR (Auxiliary Control Register) - orr r0, r0, #0x41 @ enable SMP, FW bit - mcr p15, 0, r0, c1, c0, 1 - - /* branch by CPU ID */ - mrc p15, 0, r0, c0, c0, 5 @ MPIDR (Multiprocessor Affinity Register) - and r0, r0, #0x3 - cmp r0, #0x0 - beq primary_cpu - ldr r1, =ROM_BOOT_ROMRSV2 - mov r0, #0 - str r0, [r1] -0: wfe - ldr r0, [r1] - cmp r0, #0 - beq 0b - bx r0 @ r0: entry point of U-Boot main for the secondary CPU -primary_cpu: - ldr r1, =ROM_BOOT_ROMRSV2 - ldr r0, =_start @ entry for the secondary CPU - str r0, [r1] - ldr r0, [r1] @ make sure str is complete before sev - sev @ kick the sedoncary CPU - mrc p15, 4, r1, c15, c0, 0 @ Configuration Base Address Register - bfc r1, #0, #13 @ clear bit 12-0 - mov r0, #-1 - str r0, [r1, #SCU_INV_ALL] @ SCU Invalidate All Register - mov r0, #1 @ SCU enable - str r0, [r1, #SCU_CTRL] @ SCU Control Register -#endif - - bl setup_init_ram @ RAM area for temporary stack pointer - - mov lr, r8 @ restore link - mov pc, lr @ back to my caller -ENDPROC(lowlevel_init) - -ENTRY(enable_mmu) - mrc p15, 0, r0, c2, c0, 2 @ TTBCR (Translation Table Base Control Register) - bic r0, r0, #0x37 - orr r0, r0, #0x20 @ disable TTBR1 - mcr p15, 0, r0, c2, c0, 2 - - orr r0, r3, #0x8 @ Outer Cacheability for table walks: WBWA - mcr p15, 0, r0, c2, c0, 0 @ TTBR0 - - mov r0, #0 - mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs - - mov r0, #-1 @ manager for all domains (No permission check) - mcr p15, 0, r0, c3, c0, 0 @ DACR (Domain Access Control Register) - - dsb - isb - /* - * MMU on: - * TLBs was already invalidated in "../start.S" - * So, we don't need to invalidate it here. - */ - mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) - orr r0, r0, #(CR_C | CR_M) @ MMU and Dcache enable - mcr p15, 0, r0, c1, c0, 0 - - mov pc, lr -ENDPROC(enable_mmu) - -#include <asm/arch/ssc-regs.h> - -#define BOOT_RAM_SIZE (SSC_WAY_SIZE) -#define BOOT_WAY_BITS (0x00000100) /* way 8 */ - -ENTRY(setup_init_ram) - /* - * Touch to zero for the boot way - */ -0: - /* - * set SSCOQM, SSCOQAD, SSCOQSZ, SSCOQWN in this order - */ - ldr r0, = 0x00408006 @ touch to zero with address range - ldr r1, = SSCOQM - str r0, [r1] - ldr r0, = (CONFIG_SYS_INIT_SP_ADDR - BOOT_RAM_SIZE) @ base address - ldr r1, = SSCOQAD - str r0, [r1] - ldr r0, = BOOT_RAM_SIZE - ldr r1, = SSCOQSZ - str r0, [r1] - ldr r0, = BOOT_WAY_BITS - ldr r1, = SSCOQWN - str r0, [r1] - ldr r1, = SSCOPPQSEF - ldr r0, [r1] - cmp r0, #0 @ check if the command is successfully set - bne 0b @ try again if an error occurres - - ldr r1, = SSCOLPQS -1: - ldr r0, [r1] - cmp r0, #0x4 - bne 1b @ wait until the operation is completed - str r0, [r1] @ clear the complete notification flag - - mov pc, lr -ENDPROC(setup_init_ram) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile deleted file mode 100644 index 72f46636fd..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-y += bcu_init.o sbc_init.o sg_init.o pll_init.o clkrst_init.o \ - pll_spectrum.o umc_init.o ddrphy_init.o -else -obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o -obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o -endif - -obj-y += boot-mode.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c deleted file mode 100644 index 85f37f299b..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/bcu-regs.h> - -#define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x)) - -void bcu_init(void) -{ - int shift; - - writel(0x44444444, BCSCR0); /* 0x20000000-0x3fffffff: ASM bus */ - writel(0x11111111, BCSCR2); /* 0x80000000-0x9fffffff: IPPC/IPPD-bus */ - writel(0x11111111, BCSCR3); /* 0xa0000000-0xbfffffff: IPPC/IPPD-bus */ - writel(0x11111111, BCSCR4); /* 0xc0000000-0xdfffffff: IPPC/IPPD-bus */ - writel(0x11111111, BCSCR5); /* 0xe0000000-0Xffffffff: IPPC/IPPD-bus */ - - /* Specify DDR channel */ - shift = (CONFIG_SDRAM1_BASE - CONFIG_SDRAM0_BASE) / 0x04000000 * 4; - writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */ - - shift -= 32; - writel(ch(shift), BCIPPCCHR3); /* 0xa0000000-0xbfffffff */ - - shift -= 32; - writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */ -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c deleted file mode 100644 index d359b56291..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/boot-mode.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c deleted file mode 100644 index 18965a94c5..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sc-regs.h> - -void clkrst_init(void) -{ - u32 tmp; - - /* deassert reset */ - tmp = readl(SC_RSTCTRL); - tmp |= SC_RSTCTRL_NRST_ETHER | SC_RSTCTRL_NRST_UMC1 - | SC_RSTCTRL_NRST_UMC0 | SC_RSTCTRL_NRST_NAND; - writel(tmp, SC_RSTCTRL); - readl(SC_RSTCTRL); /* dummy read */ - - /* privide clocks */ - tmp = readl(SC_CLKCTRL); - tmp |= SC_CLKCTRL_CLK_ETHER | SC_CLKCTRL_CLK_MIO | SC_CLKCTRL_CLK_UMC - | SC_CLKCTRL_CLK_NAND | SC_CLKCTRL_CLK_SBC | SC_CLKCTRL_CLK_PERI; - writel(tmp, SC_CLKCTRL); - readl(SC_CLKCTRL); /* dummy read */ -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/ddrphy_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/ddrphy_init.c deleted file mode 100644 index 60fc5ad6ea..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/ddrphy_init.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/types.h> -#include <asm/io.h> -#include <asm/arch/ddrphy-regs.h> - -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) -{ - u32 tmp; - - writel(0x0300c473, &phy->pgcr[1]); - if (freq == 1333) { - writel(0x0a806844, &phy->ptr[0]); - writel(0x208e0124, &phy->ptr[1]); - } else { - writel(0x0c807d04, &phy->ptr[0]); - writel(0x2710015E, &phy->ptr[1]); - } - writel(0x00083DEF, &phy->ptr[2]); - if (freq == 1333) { - writel(0x0f051616, &phy->ptr[3]); - writel(0x06ae08d6, &phy->ptr[4]); - } else { - writel(0x12061A80, &phy->ptr[3]); - writel(0x08027100, &phy->ptr[4]); - } - writel(0xF004001A, &phy->dsgcr); - - /* change the value of the on-die pull-up/pull-down registors */ - tmp = readl(&phy->dxccr); - tmp &= ~0x0ee0; - tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; - writel(tmp, &phy->dxccr); - - writel(0x0000040B, &phy->dcr); - if (freq == 1333) { - writel(0x85589955, &phy->dtpr[0]); - if (size == 1) - writel(0x1a8253c0, &phy->dtpr[1]); - else - writel(0x1a8363c0, &phy->dtpr[1]); - writel(0x5002c200, &phy->dtpr[2]); - writel(0x00000b51, &phy->mr0); - } else { - writel(0x999cbb66, &phy->dtpr[0]); - if (size == 1) - writel(0x1a82dbc0, &phy->dtpr[1]); - else - writel(0x1a878400, &phy->dtpr[1]); - writel(0xa00214f8, &phy->dtpr[2]); - writel(0x00000d71, &phy->mr0); - } - writel(0x00000006, &phy->mr1); - if (freq == 1333) - writel(0x00000290, &phy->mr2); - else - writel(0x00000298, &phy->mr2); - - writel(0x00000800, &phy->mr3); - - while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) - ; - - writel(0x0300C473, &phy->pgcr[1]); - writel(0x0000005D, &phy->zq[0].cr[1]); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S b/arch/arm/cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S deleted file mode 100644 index c0778a0abb..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/linkage.h> -#include <asm/arch/sg-regs.h> - -#define UART_CLK 36864000 -#include <asm/arch/debug-uart.S> - -ENTRY(setup_lowlevel_debug) - init_debug_uart r0, r1, r2 - - /* UART Port 0 */ - set_pinsel 85, 1, r0, r1 - set_pinsel 88, 1, r0, r1 - - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c deleted file mode 100644 index a7429402f3..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sg-regs.h> - -void pin_init(void) -{ - u32 tmp; - - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(85, 1); /* HSDOUT3 -> RXD0 */ - sg_set_pinsel(88, 1); /* HDDOUT6 -> TXD0 */ - - sg_set_pinsel(69, 23); /* PCIOWR -> TXD1 */ - sg_set_pinsel(70, 23); /* PCIORD -> RXD1 */ - - sg_set_pinsel(128, 13); /* XIRQ6 -> TXD2 */ - sg_set_pinsel(129, 13); /* XIRQ7 -> RXD2 */ - - sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */ - sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */ -#endif - -#ifdef CONFIG_NAND_DENALI - sg_set_pinsel(158, 0); /* XNFRE -> XNFRE_GB */ - sg_set_pinsel(159, 0); /* XNFWE -> XNFWE_GB */ - sg_set_pinsel(160, 0); /* XFALE -> NFALE_GB */ - sg_set_pinsel(161, 0); /* XFCLE -> NFCLE_GB */ - sg_set_pinsel(162, 0); /* XNFWP -> XFNWP_GB */ - sg_set_pinsel(163, 0); /* XNFCE0 -> XNFCE0_GB */ - sg_set_pinsel(164, 0); /* NANDRYBY0 -> NANDRYBY0_GB */ - sg_set_pinsel(22, 0); /* MMCCLK -> XFNCE1_GB */ - sg_set_pinsel(23, 0); /* MMCCMD -> NANDRYBY1_GB */ - sg_set_pinsel(24, 0); /* MMCDAT0 -> NFD0_GB */ - sg_set_pinsel(25, 0); /* MMCDAT1 -> NFD1_GB */ - sg_set_pinsel(26, 0); /* MMCDAT2 -> NFD2_GB */ - sg_set_pinsel(27, 0); /* MMCDAT3 -> NFD3_GB */ - sg_set_pinsel(28, 0); /* MMCDAT4 -> NFD4_GB */ - sg_set_pinsel(29, 0); /* MMCDAT5 -> NFD5_GB */ - sg_set_pinsel(30, 0); /* MMCDAT6 -> NFD6_GB */ - sg_set_pinsel(31, 0); /* MMCDAT7 -> NFD7_GB */ -#endif - -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(53, 0); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(54, 0); /* USB0OD -> USB0OD */ - sg_set_pinsel(55, 0); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(56, 0); /* USB1OD -> USB1OD */ - /* sg_set_pinsel(67, 23); */ /* PCOE -> USB2VBUS */ - /* sg_set_pinsel(68, 23); */ /* PCWAIT -> USB2OD */ -#endif - - tmp = readl(SG_IECTRL); - tmp |= 0x41; - writel(tmp, SG_IECTRL); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c deleted file mode 100644 index 9d51299308..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/arch/platdevice.h> - -#define UART_MASTER_CLK 36864000 - -SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) -SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) -SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) -SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) - -struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { - { - .base = 0x5a800100, - }, - { - .base = 0x5a810100, - }, - { - .base = 0x5a820100, - }, -}; diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c deleted file mode 100644 index b83582fee7..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sc-regs.h> -#include <asm/arch/sg-regs.h> - -#undef DPLL_SSC_RATE_1PER - -static void dpll_init(void) -{ - u32 tmp; - - /* - * Set Frequency - * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) - * to FOUT (DPLLCTRL.bit[29:20]) - */ - tmp = readl(SC_DPLLCTRL); - tmp &= ~0x000f0000; -#if CONFIG_DDR_FREQ == 1600 - tmp |= 0x000c0000; -#elif CONFIG_DDR_FREQ == 1333 - tmp |= 0x000d0000; -#else -# error "Unknown frequency" -#endif - -#if defined(DPLL_SSC_RATE_1PER) - tmp &= ~SC_DPLLCTRL_SSC_RATE; -#else - tmp |= SC_DPLLCTRL_SSC_RATE; -#endif - writel(tmp, SC_DPLLCTRL); - - tmp = readl(SC_DPLLCTRL2); - tmp |= SC_DPLLCTRL2_NRSTDS; - writel(tmp, SC_DPLLCTRL2); -} - -static void upll_init(void) -{ - u32 tmp, clk_mode_upll, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ - tmp = readl(SC_UPLLCTRL); - tmp &= ~0x18000000; - writel(tmp, SC_UPLLCTRL); - - if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x0228f5c0; - } else { - /* AXO: default 24.576MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x02328000; - } - } - - writel(tmp, SC_UPLLCTRL); - - /* set 1 to K_LD(UPLLCTRL.bit[27]) */ - tmp |= 0x08000000; - writel(tmp, SC_UPLLCTRL); - - /* wait 10 usec */ - udelay(10); - - /* set 1 to SNRT(UPLLCTRL.bit[28]) */ - tmp |= 0x10000000; - writel(tmp, SC_UPLLCTRL); -} - -static void vpll_init(void) -{ - u32 tmp, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* set 1 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27BCTRL); - - /* Set 0 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27BCTRL2); - - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27BCTRL3); - } else { - /* AXO: default 24.576MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27BCTRL3); - } - - /* Set 1 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* wait 10 usec */ - udelay(10); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* set 0 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= ~0x00000001; - writel(tmp, SC_VPLL27BCTRL); -} - -void pll_init(void) -{ - dpll_init(); - upll_init(); - vpll_init(); - - /* - * Wait 500 usec until dpll get stable - * We wait 10 usec in upll_init() and vpll_init() - * so 20 usec can be saved here. - */ - udelay(480); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c deleted file mode 100644 index 837b2a891b..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/pll_spectrum.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c deleted file mode 100644 index 4839c943c7..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sbc-regs.h> -#include <asm/arch/sg-regs.h> - -void sbc_init(void) -{ - u32 tmp; - - /* system bus output enable */ - tmp = readl(PC0CTRL); - tmp &= 0xfffffcff; - writel(tmp, PC0CTRL); - - /* XECS1: sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - -#if !defined(CONFIG_SPL_BUILD) - /* XECS0: boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); -#endif - /* XECS3: peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); - writel(0x0400bc01, SBBASE1); - writel(0x0800bf01, SBBASE3); - -#if !defined(CONFIG_SPL_BUILD) - /* enable access to sub memory when boot swap is on */ - sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */ -#endif - sg_set_pinsel(156, 1); /* PORT25 -> XECS3 */ -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c deleted file mode 100644 index 2cc5df608f..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sg-regs.h> - -void sg_init(void) -{ - u32 tmp; - - /* Set DDR size */ - tmp = sg_memconf_val_ch0(CONFIG_SDRAM0_SIZE, CONFIG_DDR_NUM_CH0); - tmp |= sg_memconf_val_ch1(CONFIG_SDRAM1_SIZE, CONFIG_DDR_NUM_CH1); -#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE < CONFIG_SDRAM1_BASE - tmp |= SG_MEMCONF_SPARSEMEM; -#endif - writel(tmp, SG_MEMCONF); - - /* Input ports must be enabled before deasserting reset of cores */ - tmp = readl(SG_IECTRL); - tmp |= 0x1; - writel(tmp, SG_IECTRL); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c deleted file mode 100644 index bbc3dcb3da..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/umc-regs.h> -#include <asm/arch/ddrphy-regs.h> - -static void umc_start_ssif(void __iomem *ssif_base) -{ - writel(0x00000000, ssif_base + 0x0000b004); - writel(0xffffffff, ssif_base + 0x0000c004); - writel(0x000fffcf, ssif_base + 0x0000c008); - writel(0x00000001, ssif_base + 0x0000b000); - writel(0x00000001, ssif_base + 0x0000c000); - writel(0x03010101, ssif_base + UMC_MDMCHSEL); - writel(0x03010100, ssif_base + UMC_DMDCHSEL); - - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); - - writel(0x00000001, ssif_base + UMC_CPURST); - writel(0x00000001, ssif_base + UMC_IDSRST); - writel(0x00000001, ssif_base + UMC_IXMRST); - writel(0x00000001, ssif_base + UMC_MDMRST); - writel(0x00000001, ssif_base + UMC_MDDRST); - writel(0x00000001, ssif_base + UMC_SIORST); - writel(0x00000001, ssif_base + UMC_VIORST); - writel(0x00000001, ssif_base + UMC_FRCRST); - writel(0x00000001, ssif_base + UMC_RGLRST); - writel(0x00000001, ssif_base + UMC_AIORST); - writel(0x00000001, ssif_base + UMC_DMDRST); -} - -static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, - int size, int freq) -{ - if (freq == 1333) { - writel(0x45990b11, dramcont + UMC_CMDCTLA); - writel(0x16958924, dramcont + UMC_CMDCTLB); - writel(0x5101046A, dramcont + UMC_INITCTLA); - - if (size == 1) - writel(0x27028B0A, dramcont + UMC_INITCTLB); - else if (size == 2) - writel(0x38028B0A, dramcont + UMC_INITCTLB); - - writel(0x000FF0FF, dramcont + UMC_INITCTLC); - writel(0x00000b51, dramcont + UMC_DRMMR0); - } else if (freq == 1600) { - writel(0x36BB0F17, dramcont + UMC_CMDCTLA); - writel(0x18C6AA24, dramcont + UMC_CMDCTLB); - writel(0x5101387F, dramcont + UMC_INITCTLA); - - if (size == 1) - writel(0x2F030D3F, dramcont + UMC_INITCTLB); - else if (size == 2) - writel(0x43030D3F, dramcont + UMC_INITCTLB); - - writel(0x00FF00FF, dramcont + UMC_INITCTLC); - writel(0x00000d71, dramcont + UMC_DRMMR0); - } - - writel(0x00000006, dramcont + UMC_DRMMR1); - - if (freq == 1333) - writel(0x00000290, dramcont + UMC_DRMMR2); - else if (freq == 1600) - writel(0x00000298, dramcont + UMC_DRMMR2); - - writel(0x00000800, dramcont + UMC_DRMMR3); - - if (freq == 1333) { - if (size == 1) - writel(0x00240512, dramcont + UMC_SPCCTLA); - else if (size == 2) - writel(0x00350512, dramcont + UMC_SPCCTLA); - - writel(0x00ff0006, dramcont + UMC_SPCCTLB); - writel(0x000a00ac, dramcont + UMC_RDATACTL_D0); - } else if (freq == 1600) { - if (size == 1) - writel(0x002B0617, dramcont + UMC_SPCCTLA); - else if (size == 2) - writel(0x003F0617, dramcont + UMC_SPCCTLA); - - writel(0x00ff0008, dramcont + UMC_SPCCTLB); - writel(0x000c00ae, dramcont + UMC_RDATACTL_D0); - } - - writel(0x04060806, dramcont + UMC_WDATACTL_D0); - writel(0x04a02000, dramcont + UMC_DATASET); - writel(0x00000000, ca_base + 0x2300); - writel(0x00400020, dramcont + UMC_DCCGCTL); - writel(0x00000003, dramcont + 0x7000); - writel(0x0000000f, dramcont + 0x8000); - writel(0x000000c3, dramcont + 0x8004); - writel(0x00000071, dramcont + 0x8008); - writel(0x0000003b, dramcont + UMC_DICGCTLA); - writel(0x020a0808, dramcont + UMC_DICGCTLB); - writel(0x00000004, dramcont + UMC_FLOWCTLG); - writel(0x80000201, ca_base + 0xc20); - writel(0x0801e01e, dramcont + UMC_FLOWCTLA); - writel(0x00200000, dramcont + UMC_FLOWCTLB); - writel(0x00004444, dramcont + UMC_FLOWCTLC); - writel(0x200a0a00, dramcont + UMC_SPCSETB); - writel(0x00000000, dramcont + UMC_SPCSETD); - writel(0x00000520, dramcont + UMC_DFICUPDCTLA); -} - -static int umc_init_sub(int freq, int size_ch0, int size_ch1) -{ - void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; - void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); - void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); - void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); - void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); - void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); - void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); - - umc_dram_init_start(dramcont0); - umc_dram_init_start(dramcont1); - umc_dram_init_poll(dramcont0); - umc_dram_init_poll(dramcont1); - - writel(0x00000101, dramcont0 + UMC_DIOCTLA); - - ddrphy_init(phy0_0, freq, size_ch0); - - ddrphy_prepare_training(phy0_0, 0); - ddrphy_training(phy0_0); - - writel(0x00000101, dramcont1 + UMC_DIOCTLA); - - ddrphy_init(phy1_0, freq, size_ch1); - - ddrphy_prepare_training(phy1_0, 1); - ddrphy_training(phy1_0); - - umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); - umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); - - umc_start_ssif(ssif_base); - - return 0; -} - -int umc_init(void) -{ - return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, - CONFIG_SDRAM1_SIZE / 0x08000000); -} - -#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ - (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ - CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 -/* OK */ -#else -#error Unsupported DDR configuration. -#endif diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile deleted file mode 100644 index e330fda1ed..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-y += sbc_init.o sg_init.o pll_init.o clkrst_init.o \ - pll_spectrum.o umc_init.o ddrphy_init.o -else -obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o -obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o -endif - -obj-y += boot-mode.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c deleted file mode 100644 index c31b74badd..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <spl.h> -#include <asm/io.h> -#include <asm/arch/boot-device.h> -#include <asm/arch/sg-regs.h> -#include <asm/arch/sbc-regs.h> - -struct boot_device_info boot_device_table[] = { - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize 1MB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize 1MB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, ONFI, Addr 5)"}, - {BOOT_DEVICE_MMC1, "eMMC Boot (3.3V)"}, - {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - { /* sentinel */ } -}; - -int get_boot_mode_sel(void) -{ - return (readl(SG_PINMON0) >> 1) & 0x1f; -} - -u32 spl_boot_device(void) -{ - int boot_mode; - - if (boot_is_swapped()) - return BOOT_DEVICE_NOR; - - boot_mode = get_boot_mode_sel(); - - return boot_device_table[boot_mode].type; -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c deleted file mode 100644 index 18965a94c5..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sc-regs.h> - -void clkrst_init(void) -{ - u32 tmp; - - /* deassert reset */ - tmp = readl(SC_RSTCTRL); - tmp |= SC_RSTCTRL_NRST_ETHER | SC_RSTCTRL_NRST_UMC1 - | SC_RSTCTRL_NRST_UMC0 | SC_RSTCTRL_NRST_NAND; - writel(tmp, SC_RSTCTRL); - readl(SC_RSTCTRL); /* dummy read */ - - /* privide clocks */ - tmp = readl(SC_CLKCTRL); - tmp |= SC_CLKCTRL_CLK_ETHER | SC_CLKCTRL_CLK_MIO | SC_CLKCTRL_CLK_UMC - | SC_CLKCTRL_CLK_NAND | SC_CLKCTRL_CLK_SBC | SC_CLKCTRL_CLK_PERI; - writel(tmp, SC_CLKCTRL); - readl(SC_CLKCTRL); /* dummy read */ -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c deleted file mode 100644 index c5d1f606cf..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/types.h> -#include <asm/io.h> -#include <asm/arch/ddrphy-regs.h> - -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) -{ - u32 tmp; - - writel(0x0300c473, &phy->pgcr[1]); - if (freq == 1333) { - writel(0x0a806844, &phy->ptr[0]); - writel(0x208e0124, &phy->ptr[1]); - } else { - writel(0x0c807d04, &phy->ptr[0]); - writel(0x2710015E, &phy->ptr[1]); - } - writel(0x00083DEF, &phy->ptr[2]); - if (freq == 1333) { - writel(0x0f051616, &phy->ptr[3]); - writel(0x06ae08d6, &phy->ptr[4]); - } else { - writel(0x12061A80, &phy->ptr[3]); - writel(0x08027100, &phy->ptr[4]); - } - writel(0xF004001A, &phy->dsgcr); - - /* change the value of the on-die pull-up/pull-down registors */ - tmp = readl(&phy->dxccr); - tmp &= ~0x0ee0; - tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; - writel(tmp, &phy->dxccr); - - writel(0x0000040B, &phy->dcr); - if (freq == 1333) { - writel(0x85589955, &phy->dtpr[0]); - if (size == 1) - writel(0x1a8363c0, &phy->dtpr[1]); - else - writel(0x1a8363c0, &phy->dtpr[1]); - writel(0x5002c200, &phy->dtpr[2]); - writel(0x00000b51, &phy->mr0); - } else { - writel(0x999cbb66, &phy->dtpr[0]); - if (size == 1) - writel(0x1a878400, &phy->dtpr[1]); - else - writel(0x1a878400, &phy->dtpr[1]); - writel(0xa00214f8, &phy->dtpr[2]); - writel(0x00000d71, &phy->mr0); - } - writel(0x00000006, &phy->mr1); - if (freq == 1333) - writel(0x00000290, &phy->mr2); - else - writel(0x00000298, &phy->mr2); - - writel(0x00000000, &phy->mr3); - - while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) - ; - - writel(0x0300C473, &phy->pgcr[1]); - writel(0x0000005D, &phy->zq[0].cr[1]); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S b/arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S deleted file mode 100644 index a793b7c118..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/linkage.h> -#include <asm/arch/sc-regs.h> -#include <asm/arch/sg-regs.h> - -#define UART_CLK 73728000 -#include <asm/arch/debug-uart.S> - -ENTRY(setup_lowlevel_debug) - ldr r0, =SC_CLKCTRL - ldr r1, [r0] - orr r1, r1, #SC_CLKCTRL_CLK_PERI - str r1, [r0] - - init_debug_uart r0, r1, r2 - - /* UART Port 0 */ - set_pinsel 127, 0, r0, r1 - set_pinsel 128, 0, r0, r1 - - ldr r0, =SG_LOADPINCTRL - mov r1, #1 - str r1, [r0] - - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c deleted file mode 100644 index 4e3d47615b..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sg-regs.h> - -void pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(127, 0); /* RXD0 -> RXD0 */ - sg_set_pinsel(128, 0); /* TXD0 -> TXD0 */ - sg_set_pinsel(129, 0); /* RXD1 -> RXD1 */ - sg_set_pinsel(130, 0); /* TXD1 -> TXD1 */ - sg_set_pinsel(131, 0); /* RXD2 -> RXD2 */ - sg_set_pinsel(132, 0); /* TXD2 -> TXD2 */ - sg_set_pinsel(88, 2); /* CH6CLK -> RXD3 */ - sg_set_pinsel(89, 2); /* CH6VAL -> TXD3 */ -#endif - -#ifdef CONFIG_NAND_DENALI - sg_set_pinsel(40, 0); /* NFD0 -> NFD0 */ - sg_set_pinsel(41, 0); /* NFD1 -> NFD1 */ - sg_set_pinsel(42, 0); /* NFD2 -> NFD2 */ - sg_set_pinsel(43, 0); /* NFD3 -> NFD3 */ - sg_set_pinsel(44, 0); /* NFD4 -> NFD4 */ - sg_set_pinsel(45, 0); /* NFD5 -> NFD5 */ - sg_set_pinsel(46, 0); /* NFD6 -> NFD6 */ - sg_set_pinsel(47, 0); /* NFD7 -> NFD7 */ - sg_set_pinsel(48, 0); /* NFALE -> NFALE */ - sg_set_pinsel(49, 0); /* NFCLE -> NFCLE */ - sg_set_pinsel(50, 0); /* XNFRE -> XNFRE */ - sg_set_pinsel(51, 0); /* XNFWE -> XNFWE */ - sg_set_pinsel(52, 0); /* XNFWP -> XNFWP */ - sg_set_pinsel(53, 0); /* XNFCE0 -> XNFCE0 */ - sg_set_pinsel(54, 0); /* NRYBY0 -> NRYBY0 */ -#endif - -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(184, 0); /* USB2VBUS -> USB2VBUS */ - sg_set_pinsel(185, 0); /* USB2OD -> USB2OD */ - sg_set_pinsel(187, 0); /* USB3VBUS -> USB3VBUS */ - sg_set_pinsel(188, 0); /* USB3OD -> USB3OD */ -#endif - - writel(1, SG_LOADPINCTRL); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c deleted file mode 100644 index 31ee2a2100..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/arch/platdevice.h> - -#define UART_MASTER_CLK 73728000 - -SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) -SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) -SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) -SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) - -struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { - { - .base = 0x5a800100, - }, - { - .base = 0x5a810100, - }, -}; diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c deleted file mode 100644 index 1db90f88a0..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sc-regs.h> -#include <asm/arch/sg-regs.h> - -#undef DPLL_SSC_RATE_1PER - -static void dpll_init(void) -{ - u32 tmp; - - /* - * Set Frequency - * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) - * to FOUT ( DPLLCTRL.bit[29:20] ) - */ - tmp = readl(SC_DPLLCTRL); - tmp &= ~(0x000f0000); -#if CONFIG_DDR_FREQ == 1600 - tmp |= 0x000c0000; -#elif CONFIG_DDR_FREQ == 1333 - tmp |= 0x000d0000; -#else -# error "Unsupported frequency" -#endif - - /* - * Set Moduration rate - * Set 0x0(1%)/0x1(2%) to SSC_RATE(DPLLCTRL.bit[15]) - */ -#if defined(DPLL_SSC_RATE_1PER) - tmp &= ~0x00008000; -#else - tmp |= 0x00008000; -#endif - writel(tmp, SC_DPLLCTRL); - - tmp = readl(SC_DPLLCTRL2); - tmp |= SC_DPLLCTRL2_NRSTDS; - writel(tmp, SC_DPLLCTRL2); -} - -static void stop_mpll(void) -{ - u32 tmp; - - tmp = readl(SC_MPLLOSCCTL); - - if (!(tmp & SC_MPLLOSCCTL_MPLLST)) - return; /* already stopped */ - - tmp &= ~SC_MPLLOSCCTL_MPLLEN; - writel(tmp, SC_MPLLOSCCTL); - - while (readl(SC_MPLLOSCCTL) & SC_MPLLOSCCTL_MPLLST) - ; -} - -static void vpll_init(void) -{ - u32 tmp, clk_mode_axosel; - - /* Set VPLL27A & VPLL27B */ - tmp = readl(SG_PINMON0); - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - -#if defined(CONFIG_MACH_PH1_PRO4) - /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */ - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) - return; -#endif - - /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ - tmp = readl(SC_VPLL27ACTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27BCTRL); - - /* Unset VPLA_K_LD and VPLB_K_LD bit */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Set VPLA_M and VPLB_M to 0x20 */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27BCTRL2); - - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) { - /* Set VPLA_K and VPLB_K for AXO: 25MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066666; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066666; - writel(tmp, SC_VPLL27BCTRL3); - } else { - /* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27BCTRL3); - } - - /* wait 1 usec */ - udelay(1); - - /* Set VPLA_K_LD and VPLB_K_LD to load K parameters */ - tmp = readl(SC_VPLL27ACTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Unset VPLA_SNRST and VPLB_SNRST bit */ - tmp = readl(SC_VPLL27ACTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ - tmp = readl(SC_VPLL27ACTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27BCTRL); -} - -void pll_init(void) -{ - dpll_init(); - stop_mpll(); - vpll_init(); - - /* - * Wait 500 usec until dpll get stable - * We wait 1 usec in vpll_init() so 1 usec can be saved here. - */ - udelay(499); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c deleted file mode 100644 index 4538d1af44..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sc-regs.h> - -void enable_dpll_ssc(void) -{ - u32 tmp; - - tmp = readl(SC_DPLLCTRL); - tmp |= SC_DPLLCTRL_SSC_EN; - writel(tmp, SC_DPLLCTRL); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c deleted file mode 100644 index 3c82a1aca4..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sbc-regs.h> -#include <asm/arch/sg-regs.h> - -void sbc_init(void) -{ -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) - /* - * Only CS1 is connected to support card. - * BKSZ[1:0] should be set to "01". - */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); - - if (boot_is_swapped()) { - /* - * Boot Swap On: boot from external NOR/SRAM - * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. - * - * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank - * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals - */ - writel(0x0000bc01, SBBASE0); - } else { - /* - * Boot Swap Off: boot from mask ROM - * 0x00000000-0x01ffffff: mask ROM - * 0x02000000-0x3effffff: memory bank (31MB) - * 0x03f00000-0x3fffffff: peripherals (1MB) - */ - writel(0x0000be01, SBBASE0); /* dummy */ - writel(0x0200be01, SBBASE1); - } -#elif defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -#if !defined(CONFIG_SPL_BUILD) - /* XECS0: boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); -#endif - /* XECS1: sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - - /* XECS3: peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); - - writel(0x0000bc01, SBBASE0); /* boot memory */ - writel(0x0400bc01, SBBASE1); /* sub memory */ - writel(0x0800bf01, SBBASE3); /* peripherals */ - -#if !defined(CONFIG_SPL_BUILD) - sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */ -#endif - sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */ - writel(0x00000001, SG_LOADPINCTRL); - -#endif /* CONFIG_XXX_MICRO_SUPPORT_CARD */ -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c deleted file mode 100644 index b7c4b10969..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sg-regs.h> - -void sg_init(void) -{ - u32 tmp; - - /* Set DDR size */ - tmp = sg_memconf_val_ch0(CONFIG_SDRAM0_SIZE, CONFIG_DDR_NUM_CH0); - tmp |= sg_memconf_val_ch1(CONFIG_SDRAM1_SIZE, CONFIG_DDR_NUM_CH1); -#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE < CONFIG_SDRAM1_BASE - tmp |= SG_MEMCONF_SPARSEMEM; -#endif - writel(tmp, SG_MEMCONF); - - /* Input ports must be enabled before deasserting reset of cores */ - tmp = readl(SG_IECTRL); - tmp |= 1 << 6; - writel(tmp, SG_IECTRL); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c deleted file mode 100644 index 2d1bde6f13..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/umc-regs.h> -#include <asm/arch/ddrphy-regs.h> - -static void umc_start_ssif(void __iomem *ssif_base) -{ - writel(0x00000001, ssif_base + 0x0000b004); - writel(0xffffffff, ssif_base + 0x0000c004); - writel(0x07ffffff, ssif_base + 0x0000c008); - writel(0x00000001, ssif_base + 0x0000b000); - writel(0x00000001, ssif_base + 0x0000c000); - - writel(0x03010100, ssif_base + UMC_HDMCHSEL); - writel(0x03010101, ssif_base + UMC_MDMCHSEL); - writel(0x03010100, ssif_base + UMC_DVCCHSEL); - writel(0x03010100, ssif_base + UMC_DMDCHSEL); - - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); - writel(0x00000000, ssif_base + 0x0000c044); /* DCGIV_SSIF_REG */ - - writel(0x00000001, ssif_base + UMC_CPURST); - writel(0x00000001, ssif_base + UMC_IDSRST); - writel(0x00000001, ssif_base + UMC_IXMRST); - writel(0x00000001, ssif_base + UMC_HDMRST); - writel(0x00000001, ssif_base + UMC_MDMRST); - writel(0x00000001, ssif_base + UMC_HDDRST); - writel(0x00000001, ssif_base + UMC_MDDRST); - writel(0x00000001, ssif_base + UMC_SIORST); - writel(0x00000001, ssif_base + UMC_GIORST); - writel(0x00000001, ssif_base + UMC_HD2RST); - writel(0x00000001, ssif_base + UMC_VIORST); - writel(0x00000001, ssif_base + UMC_DVCRST); - writel(0x00000001, ssif_base + UMC_RGLRST); - writel(0x00000001, ssif_base + UMC_VPERST); - writel(0x00000001, ssif_base + UMC_AIORST); - writel(0x00000001, ssif_base + UMC_DMDRST); -} - -static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, - int size, int freq) -{ - writel(0x66bb0f17, dramcont + UMC_CMDCTLA); - writel(0x18c6aa44, dramcont + UMC_CMDCTLB); - writel(0x5101387f, dramcont + UMC_INITCTLA); - writel(0x43030d3f, dramcont + UMC_INITCTLB); - writel(0x00ff00ff, dramcont + UMC_INITCTLC); - writel(0x00000d71, dramcont + UMC_DRMMR0); - writel(0x00000006, dramcont + UMC_DRMMR1); - writel(0x00000298, dramcont + UMC_DRMMR2); - writel(0x00000000, dramcont + UMC_DRMMR3); - writel(0x003f0617, dramcont + UMC_SPCCTLA); - writel(0x00ff0008, dramcont + UMC_SPCCTLB); - writel(0x000c00ae, dramcont + UMC_RDATACTL_D0); - writel(0x000c00ae, dramcont + UMC_RDATACTL_D1); - writel(0x04060802, dramcont + UMC_WDATACTL_D0); - writel(0x04060802, dramcont + UMC_WDATACTL_D1); - writel(0x04a02000, dramcont + UMC_DATASET); - writel(0x00000000, ca_base + 0x2300); - writel(0x00400020, dramcont + UMC_DCCGCTL); - writel(0x0000000f, dramcont + 0x7000); - writel(0x0000000f, dramcont + 0x8000); - writel(0x000000c3, dramcont + 0x8004); - writel(0x00000071, dramcont + 0x8008); - writel(0x00000004, dramcont + UMC_FLOWCTLG); - writel(0x00000000, dramcont + 0x0060); - writel(0x80000201, ca_base + 0xc20); - writel(0x0801e01e, dramcont + UMC_FLOWCTLA); - writel(0x00200000, dramcont + UMC_FLOWCTLB); - writel(0x00004444, dramcont + UMC_FLOWCTLC); - writel(0x200a0a00, dramcont + UMC_SPCSETB); - writel(0x00010000, dramcont + UMC_SPCSETD); - writel(0x80000020, dramcont + UMC_DFICUPDCTLA); -} - -static int umc_init_sub(int freq, int size_ch0, int size_ch1) -{ - void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; - void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); - void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); - void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); - void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); - void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); - void __iomem *phy0_1 = (void __iomem *)DDRPHY_BASE(0, 1); - void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); - void __iomem *phy1_1 = (void __iomem *)DDRPHY_BASE(1, 1); - - umc_dram_init_start(dramcont0); - umc_dram_init_start(dramcont1); - umc_dram_init_poll(dramcont0); - umc_dram_init_poll(dramcont1); - - writel(0x00000101, dramcont0 + UMC_DIOCTLA); - - ddrphy_init(phy0_0, freq, size_ch0); - - ddrphy_prepare_training(phy0_0, 0); - ddrphy_training(phy0_0); - - writel(0x00000103, dramcont0 + UMC_DIOCTLA); - - ddrphy_init(phy0_1, freq, size_ch0); - - ddrphy_prepare_training(phy0_1, 1); - ddrphy_training(phy0_1); - - writel(0x00000101, dramcont1 + UMC_DIOCTLA); - - ddrphy_init(phy1_0, freq, size_ch1); - - ddrphy_prepare_training(phy1_0, 0); - ddrphy_training(phy1_0); - - writel(0x00000103, dramcont1 + UMC_DIOCTLA); - - ddrphy_init(phy1_1, freq, size_ch1); - - ddrphy_prepare_training(phy1_1, 1); - ddrphy_training(phy1_1); - - umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); - umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); - - umc_start_ssif(ssif_base); - - return 0; -} - -int umc_init(void) -{ - return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, - CONFIG_SDRAM1_SIZE / 0x08000000); -} - -#if ((CONFIG_SDRAM0_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH0 == 2) || \ - (CONFIG_SDRAM0_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH0 == 1)) && \ - ((CONFIG_SDRAM1_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH1 == 2) || \ - (CONFIG_SDRAM1_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH1 == 1)) -/* OK */ -#else - #error Unsupported DDR configuration. -#endif diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile deleted file mode 100644 index 72f46636fd..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-y += bcu_init.o sbc_init.o sg_init.o pll_init.o clkrst_init.o \ - pll_spectrum.o umc_init.o ddrphy_init.o -else -obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o -obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o -endif - -obj-y += boot-mode.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/bcu_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/bcu_init.c deleted file mode 100644 index 69b172e4e7..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/bcu_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/bcu_init.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/boot-mode.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/boot-mode.c deleted file mode 100644 index d359b56291..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/boot-mode.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/boot-mode.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c deleted file mode 100644 index 18965a94c5..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sc-regs.h> - -void clkrst_init(void) -{ - u32 tmp; - - /* deassert reset */ - tmp = readl(SC_RSTCTRL); - tmp |= SC_RSTCTRL_NRST_ETHER | SC_RSTCTRL_NRST_UMC1 - | SC_RSTCTRL_NRST_UMC0 | SC_RSTCTRL_NRST_NAND; - writel(tmp, SC_RSTCTRL); - readl(SC_RSTCTRL); /* dummy read */ - - /* privide clocks */ - tmp = readl(SC_CLKCTRL); - tmp |= SC_CLKCTRL_CLK_ETHER | SC_CLKCTRL_CLK_MIO | SC_CLKCTRL_CLK_UMC - | SC_CLKCTRL_CLK_NAND | SC_CLKCTRL_CLK_SBC | SC_CLKCTRL_CLK_PERI; - writel(tmp, SC_CLKCTRL); - readl(SC_CLKCTRL); /* dummy read */ -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/ddrphy_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/ddrphy_init.c deleted file mode 100644 index a5eafef9a8..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/ddrphy_init.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <linux/types.h> -#include <asm/io.h> -#include <asm/arch/ddrphy-regs.h> - -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) -{ - u32 tmp; - - writel(0x0300c473, &phy->pgcr[1]); - if (freq == 1333) { - writel(0x0a806844, &phy->ptr[0]); - writel(0x208e0124, &phy->ptr[1]); - } else { - writel(0x0c807d04, &phy->ptr[0]); - writel(0x2710015E, &phy->ptr[1]); - } - writel(0x00083DEF, &phy->ptr[2]); - if (freq == 1333) { - writel(0x0f051616, &phy->ptr[3]); - writel(0x06ae08d6, &phy->ptr[4]); - } else { - writel(0x12061A80, &phy->ptr[3]); - writel(0x08027100, &phy->ptr[4]); - } - writel(0xF004001A, &phy->dsgcr); - - /* change the value of the on-die pull-up/pull-down registors */ - tmp = readl(&phy->dxccr); - tmp &= ~0x0ee0; - tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; - writel(tmp, &phy->dxccr); - - writel(0x0000040B, &phy->dcr); - if (freq == 1333) { - writel(0x85589955, &phy->dtpr[0]); - if (size == 1) - writel(0x1a8363c0, &phy->dtpr[1]); - else - writel(0x1a8363c0, &phy->dtpr[1]); - writel(0x5002c200, &phy->dtpr[2]); - writel(0x00000b51, &phy->mr0); - } else { - writel(0x999cbb66, &phy->dtpr[0]); - if (size == 1) - writel(0x1a878400, &phy->dtpr[1]); - else - writel(0x1a878400, &phy->dtpr[1]); - writel(0xa00214f8, &phy->dtpr[2]); - writel(0x00000d71, &phy->mr0); - } - writel(0x00000006, &phy->mr1); - if (freq == 1333) - writel(0x00000290, &phy->mr2); - else - writel(0x00000298, &phy->mr2); - -#ifdef CONFIG_DDR_STANDARD - writel(0x00000000, &phy->mr3); -#else - writel(0x00000800, &phy->mr3); -#endif - - while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) - ; - - writel(0x0300C473, &phy->pgcr[1]); - writel(0x0000005D, &phy->zq[0].cr[1]); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/lowlevel_debug.S b/arch/arm/cpu/armv7/uniphier/ph1-sld8/lowlevel_debug.S deleted file mode 100644 index a413e5fd8a..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/lowlevel_debug.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/linkage.h> -#include <asm/arch/sg-regs.h> - -#define UART_CLK 80000000 -#include <asm/arch/debug-uart.S> - -ENTRY(setup_lowlevel_debug) - init_debug_uart r0, r1, r2 - - /* UART Port 0 */ - set_pinsel 70, 3, r0, r1 - set_pinsel 71, 3, r0, r1 - - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c deleted file mode 100644 index 5e80335b58..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sg-regs.h> - -void pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(70, 3); /* HDDOUT0 -> TXD0 */ - sg_set_pinsel(71, 3); /* HSDOUT1 -> RXD0 */ - - sg_set_pinsel(114, 0); /* TXD1 -> TXD1 */ - sg_set_pinsel(115, 0); /* RXD1 -> RXD1 */ - - sg_set_pinsel(112, 1); /* SBO1 -> TXD2 */ - sg_set_pinsel(113, 1); /* SBI1 -> RXD2 */ - - sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */ - sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */ -#endif - -#ifdef CONFIG_SYS_I2C_UNIPHIER - { - u32 tmp; - tmp = readl(SG_IECTRL); - tmp |= 0xc00; /* enable SCL0, SDA0, SCL1, SDA1 */ - writel(tmp, SG_IECTRL); - } -#endif - -#ifdef CONFIG_NAND_DENALI - sg_set_pinsel(15, 0); /* XNFRE_GB -> XNFRE_GB */ - sg_set_pinsel(16, 0); /* XNFWE_GB -> XNFWE_GB */ - sg_set_pinsel(17, 0); /* XFALE_GB -> NFALE_GB */ - sg_set_pinsel(18, 0); /* XFCLE_GB -> NFCLE_GB */ - sg_set_pinsel(19, 0); /* XNFWP_GB -> XFNWP_GB */ - sg_set_pinsel(20, 0); /* XNFCE0_GB -> XNFCE0_GB */ - sg_set_pinsel(21, 0); /* NANDRYBY0_GB -> NANDRYBY0_GB */ - sg_set_pinsel(22, 0); /* XFNCE1_GB -> XFNCE1_GB */ - sg_set_pinsel(23, 0); /* NANDRYBY1_GB -> NANDRYBY1_GB */ - sg_set_pinsel(24, 0); /* NFD0_GB -> NFD0_GB */ - sg_set_pinsel(25, 0); /* NFD1_GB -> NFD1_GB */ - sg_set_pinsel(26, 0); /* NFD2_GB -> NFD2_GB */ - sg_set_pinsel(27, 0); /* NFD3_GB -> NFD3_GB */ - sg_set_pinsel(28, 0); /* NFD4_GB -> NFD4_GB */ - sg_set_pinsel(29, 0); /* NFD5_GB -> NFD5_GB */ - sg_set_pinsel(30, 0); /* NFD6_GB -> NFD6_GB */ - sg_set_pinsel(31, 0); /* NFD7_GB -> NFD7_GB */ -#endif - -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(41, 0); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(42, 0); /* USB0OD -> USB0OD */ - sg_set_pinsel(43, 0); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(44, 0); /* USB1OD -> USB1OD */ - /* sg_set_pinsel(114, 4); */ /* TXD1 -> USB2VBUS (shared with UART) */ - /* sg_set_pinsel(115, 4); */ /* RXD1 -> USB2OD */ -#endif -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c deleted file mode 100644 index ea0691dd67..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/arch/platdevice.h> - -#define UART_MASTER_CLK 80000000 - -SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) -SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) -SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) -SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) - -struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { - { - .base = 0x5a800100, - }, - { - .base = 0x5a810100, - }, - { - .base = 0x5a820100, - }, -}; diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c deleted file mode 100644 index 4b82700f44..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sc-regs.h> -#include <asm/arch/sg-regs.h> - -static void dpll_init(void) -{ - u32 tmp; - /* - * Set DPLL SSC parameters for DPLLCTRL3 - * [23] DIVN_TEST 0x1 - * [22:16] DIVN 0x50 - * [10] FREFSEL_TEST 0x1 - * [9:8] FREFSEL 0x2 - * [4] ICPD_TEST 0x1 - * [3:0] ICPD 0xb - */ - tmp = readl(SC_DPLLCTRL3); - tmp &= ~0x00ff0717; - tmp |= 0x00d0061b; - writel(tmp, SC_DPLLCTRL3); - - /* - * Set DPLL SSC parameters for DPLLCTRL - * <-1%> <-2%> - * [29:20] SSC_UPCNT 132 (0x084) 132 (0x084) - * [14:0] SSC_dK 6335(0x18bf) 12710(0x31a6) - */ - tmp = readl(SC_DPLLCTRL); - tmp &= ~0x3ff07fff; -#ifdef CONFIG_DPLL_SSC_RATE_1PER - tmp |= 0x084018bf; -#else - tmp |= 0x084031a6; -#endif - writel(tmp, SC_DPLLCTRL); - - /* - * Set DPLL SSC parameters for DPLLCTRL2 - * [31:29] SSC_STEP 0 - * [27] SSC_REG_REF 1 - * [26:20] SSC_M 79 (0x4f) - * [19:0] SSC_K 964689 (0xeb851) - */ - tmp = readl(SC_DPLLCTRL2); - tmp &= ~0xefffffff; - tmp |= 0x0cfeb851; - writel(tmp, SC_DPLLCTRL2); -} - -static void upll_init(void) -{ - u32 tmp, clk_mode_upll, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ - tmp = readl(SC_UPLLCTRL); - tmp &= ~0x18000000; - writel(tmp, SC_UPLLCTRL); - - if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x0228f5c0; - } else { - /* AXO: default 24.576MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x02328000; - } - } - - writel(tmp, SC_UPLLCTRL); - - /* set 1 to K_LD(UPLLCTRL.bit[27]) */ - tmp |= 0x08000000; - writel(tmp, SC_UPLLCTRL); - - /* wait 10 usec */ - udelay(10); - - /* set 1 to SNRT(UPLLCTRL.bit[28]) */ - tmp |= 0x10000000; - writel(tmp, SC_UPLLCTRL); -} - -static void vpll_init(void) -{ - u32 tmp, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* set 1 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27BCTRL); - - /* Set 0 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27BCTRL2); - - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27BCTRL3); - } else { - /* AXO: default 24.576MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27BCTRL3); - } - - /* Set 1 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* wait 10 usec */ - udelay(10); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* set 0 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= ~0x00000001; - writel(tmp, SC_VPLL27BCTRL); -} - -void pll_init(void) -{ - dpll_init(); - upll_init(); - vpll_init(); - - /* - * Wait 500 usec until dpll get stable - * We wait 10 usec in upll_init() and vpll_init() - * so 20 usec can be saved here. - */ - udelay(480); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_spectrum.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_spectrum.c deleted file mode 100644 index 9b8c4855e5..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_spectrum.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/pll_spectrum.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c deleted file mode 100644 index 5efee9c505..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sbc-regs.h> -#include <asm/arch/sg-regs.h> - -void sbc_init(void) -{ - u32 tmp; - - /* system bus output enable */ - tmp = readl(PC0CTRL); - tmp &= 0xfffffcff; - writel(tmp, PC0CTRL); - -#if !defined(CONFIG_SPL_BUILD) - /* XECS0 : dummy */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); -#endif - /* XECS1 : boot memory (always boot swap = on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - - /* XECS4 : sub memory */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL40); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL41); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL42); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL44); - - /* XECS5 : peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL50); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL51); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL52); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL54); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); /* boot memory */ - writel(0x0900bfff, SBBASE1); /* dummy */ - writel(0x0400bc01, SBBASE4); /* sub memory */ - writel(0x0800bf01, SBBASE5); /* peripherals */ - - sg_set_pinsel(134, 16); /* XIRQ6 -> XECS4 */ - sg_set_pinsel(135, 16); /* XIRQ7 -> XECS5 */ - - /* dummy read to assure write process */ - readl(SG_PINCTRL(33)); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/sg_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/sg_init.c deleted file mode 100644 index a808289a56..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/sg_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/sg_init.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c deleted file mode 100644 index 2fbc73ab03..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/umc-regs.h> -#include <asm/arch/ddrphy-regs.h> - -static void umc_start_ssif(void __iomem *ssif_base) -{ - writel(0x00000000, ssif_base + 0x0000b004); - writel(0xffffffff, ssif_base + 0x0000c004); - writel(0x000fffcf, ssif_base + 0x0000c008); - writel(0x00000001, ssif_base + 0x0000b000); - writel(0x00000001, ssif_base + 0x0000c000); - writel(0x03010101, ssif_base + UMC_MDMCHSEL); - writel(0x03010100, ssif_base + UMC_DMDCHSEL); - - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); - - writel(0x00000001, ssif_base + UMC_CPURST); - writel(0x00000001, ssif_base + UMC_IDSRST); - writel(0x00000001, ssif_base + UMC_IXMRST); - writel(0x00000001, ssif_base + UMC_MDMRST); - writel(0x00000001, ssif_base + UMC_MDDRST); - writel(0x00000001, ssif_base + UMC_SIORST); - writel(0x00000001, ssif_base + UMC_VIORST); - writel(0x00000001, ssif_base + UMC_FRCRST); - writel(0x00000001, ssif_base + UMC_RGLRST); - writel(0x00000001, ssif_base + UMC_AIORST); - writel(0x00000001, ssif_base + UMC_DMDRST); -} - -static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, - int size, int freq) -{ -#ifdef CONFIG_DDR_STANDARD - writel(0x55990b11, dramcont + UMC_CMDCTLA); - writel(0x16958944, dramcont + UMC_CMDCTLB); -#else - writel(0x45990b11, dramcont + UMC_CMDCTLA); - writel(0x16958924, dramcont + UMC_CMDCTLB); -#endif - - writel(0x5101046A, dramcont + UMC_INITCTLA); - - if (size == 1) - writel(0x27028B0A, dramcont + UMC_INITCTLB); - else if (size == 2) - writel(0x38028B0A, dramcont + UMC_INITCTLB); - - writel(0x00FF00FF, dramcont + UMC_INITCTLC); - writel(0x00000b51, dramcont + UMC_DRMMR0); - writel(0x00000006, dramcont + UMC_DRMMR1); - writel(0x00000290, dramcont + UMC_DRMMR2); - -#ifdef CONFIG_DDR_STANDARD - writel(0x00000000, dramcont + UMC_DRMMR3); -#else - writel(0x00000800, dramcont + UMC_DRMMR3); -#endif - - if (size == 1) - writel(0x00240512, dramcont + UMC_SPCCTLA); - else if (size == 2) - writel(0x00350512, dramcont + UMC_SPCCTLA); - - writel(0x00ff0006, dramcont + UMC_SPCCTLB); - writel(0x000a00ac, dramcont + UMC_RDATACTL_D0); - writel(0x04060806, dramcont + UMC_WDATACTL_D0); - writel(0x04a02000, dramcont + UMC_DATASET); - writel(0x00000000, ca_base + 0x2300); - writel(0x00400020, dramcont + UMC_DCCGCTL); - writel(0x00000003, dramcont + 0x7000); - writel(0x0000004f, dramcont + 0x8000); - writel(0x000000c3, dramcont + 0x8004); - writel(0x00000077, dramcont + 0x8008); - writel(0x0000003b, dramcont + UMC_DICGCTLA); - writel(0x020a0808, dramcont + UMC_DICGCTLB); - writel(0x00000004, dramcont + UMC_FLOWCTLG); - writel(0x80000201, ca_base + 0xc20); - writel(0x0801e01e, dramcont + UMC_FLOWCTLA); - writel(0x00200000, dramcont + UMC_FLOWCTLB); - writel(0x00004444, dramcont + UMC_FLOWCTLC); - writel(0x200a0a00, dramcont + UMC_SPCSETB); - writel(0x00000000, dramcont + UMC_SPCSETD); - writel(0x00000520, dramcont + UMC_DFICUPDCTLA); -} - -static int umc_init_sub(int freq, int size_ch0, int size_ch1) -{ - void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; - void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); - void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); - void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); - void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); - void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); - void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); - - umc_dram_init_start(dramcont0); - umc_dram_init_start(dramcont1); - umc_dram_init_poll(dramcont0); - umc_dram_init_poll(dramcont1); - - writel(0x00000101, dramcont0 + UMC_DIOCTLA); - - ddrphy_init(phy0_0, freq, size_ch0); - - ddrphy_prepare_training(phy0_0, 0); - ddrphy_training(phy0_0); - - writel(0x00000101, dramcont1 + UMC_DIOCTLA); - - ddrphy_init(phy1_0, freq, size_ch1); - - ddrphy_prepare_training(phy1_0, 1); - ddrphy_training(phy1_0); - - umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); - umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); - - umc_start_ssif(ssif_base); - - return 0; -} - -int umc_init(void) -{ - return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, - CONFIG_SDRAM1_SIZE / 0x08000000); -} - -#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ - (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ - CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 -/* OK */ -#else -#error Unsupported DDR configuration. -#endif diff --git a/arch/arm/cpu/armv7/uniphier/print_misc_info.c b/arch/arm/cpu/armv7/uniphier/print_misc_info.c deleted file mode 100644 index 69cfab519f..0000000000 --- a/arch/arm/cpu/armv7/uniphier/print_misc_info.c +++ /dev/null @@ -1,13 +0,0 @@ -/* - * Copyright (C) 2015 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/arch/board.h> - -int misc_init_f(void) -{ - return check_support_card(); -} diff --git a/arch/arm/cpu/armv7/uniphier/reset.c b/arch/arm/cpu/armv7/uniphier/reset.c deleted file mode 100644 index 50d1fed647..0000000000 --- a/arch/arm/cpu/armv7/uniphier/reset.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sc-regs.h> - -void reset_cpu(unsigned long ignored) -{ - u32 tmp; - - writel(5, SC_IRQTIMSET); /* default value */ - - tmp = readl(SC_SLFRSTSEL); - tmp &= ~0x3; /* mask [1:0] */ - tmp |= 0x0; /* XRST reboot */ - writel(tmp, SC_SLFRSTSEL); - - tmp = readl(SC_SLFRSTCTL); - tmp |= 0x1; - writel(tmp, SC_SLFRSTCTL); -} diff --git a/arch/arm/cpu/armv7/uniphier/smp.S b/arch/arm/cpu/armv7/uniphier/smp.S deleted file mode 100644 index 25ba981cea..0000000000 --- a/arch/arm/cpu/armv7/uniphier/smp.S +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Copyright (C) 2013 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <linux/linkage.h> -#include <asm/system.h> -#include <asm/arch/led.h> -#include <asm/arch/sbc-regs.h> - -/* Entry point of U-Boot main program for the secondary CPU */ -LENTRY(secondary_entry) - mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) - bic r0, r0, #(CR_C | CR_M) @ MMU and Dcache disable - mcr p15, 0, r0, c1, c0, 0 - mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs - mcr p15, 0, r0, c7, c5, 0 @ invalidate icache - dsb - led_write(C,0,,) - ldr r1, =ROM_BOOT_ROMRSV2 - mov r0, #0 - str r0, [r1] -0: wfe - ldr r4, [r1] @ r4: entry point for secondary CPUs - cmp r4, #0 - beq 0b - led_write(C, P, U, 1) - bx r4 @ secondary CPUs jump to linux -ENDPROC(secondary_entry) - -ENTRY(wakeup_secondary) - ldr r1, =ROM_BOOT_ROMRSV2 -0: ldr r0, [r1] - cmp r0, #0 - bne 0b - - /* set entry address and send event to the secondary CPU */ - ldr r0, =secondary_entry - str r0, [r1] - ldr r0, [r1] @ make sure store is complete - mov r0, #0x100 -0: subs r0, r0, #1 @ I don't know the reason, but without this wait - bne 0b @ fails to wake up the secondary CPU - sev - - /* wait until the secondary CPU reach to secondary_entry */ -0: ldr r0, [r1] - cmp r0, #0 - bne 0b - bx lr -ENDPROC(wakeup_secondary) diff --git a/arch/arm/cpu/armv7/uniphier/spl.c b/arch/arm/cpu/armv7/uniphier/spl.c deleted file mode 100644 index 8a4eafc266..0000000000 --- a/arch/arm/cpu/armv7/uniphier/spl.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (C) 2013-2015 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <spl.h> -#include <linux/compiler.h> -#include <asm/arch/led.h> -#include <asm/arch/board.h> - -void __weak bcu_init(void) -{ -}; -void sbc_init(void); -void sg_init(void); -void pll_init(void); -void pin_init(void); -void clkrst_init(void); -int umc_init(void); -void enable_dpll_ssc(void); - -void spl_board_init(void) -{ - bcu_init(); - - sbc_init(); - - sg_init(); - - uniphier_board_reset(); - - pll_init(); - - uniphier_board_init(); - - led_write(L, 0, , ); - - clkrst_init(); - - led_write(L, 1, , ); - - { - int res; - - res = umc_init(); - if (res < 0) { - while (1) - ; - } - } - led_write(L, 2, , ); - - enable_dpll_ssc(); - - led_write(L, 3, , ); -} diff --git a/arch/arm/cpu/armv7/uniphier/support_card.c b/arch/arm/cpu/armv7/uniphier/support_card.c deleted file mode 100644 index 443224c451..0000000000 --- a/arch/arm/cpu/armv7/uniphier/support_card.c +++ /dev/null @@ -1,225 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/board.h> - -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) - -#define PFC_MICRO_SUPPORT_CARD_RESET \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x000D0034) -#define PFC_MICRO_SUPPORT_CARD_REVISION \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x000D00E0) -/* - * 0: reset deassert, 1: reset - * - * bit[0]: LAN, I2C, LED - * bit[1]: UART - */ -void support_card_reset_deassert(void) -{ - writel(0, PFC_MICRO_SUPPORT_CARD_RESET); -} - -void support_card_reset(void) -{ - writel(3, PFC_MICRO_SUPPORT_CARD_RESET); -} - -static int support_card_show_revision(void) -{ - u32 revision; - - revision = readl(PFC_MICRO_SUPPORT_CARD_REVISION); - printf("(PFC CPLD version %d.%d)\n", revision >> 4, revision & 0xf); - return 0; -} -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) - -#define DCC_MICRO_SUPPORT_CARD_RESET_LAN \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401300) -#define DCC_MICRO_SUPPORT_CARD_RESET_UART \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401304) -#define DCC_MICRO_SUPPORT_CARD_RESET_I2C \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401308) -#define DCC_MICRO_SUPPORT_CARD_REVISION \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x005000E0) - -void support_card_reset_deassert(void) -{ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ -} - -void support_card_reset(void) -{ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ -} - -static int support_card_show_revision(void) -{ - u32 revision; - - revision = readl(DCC_MICRO_SUPPORT_CARD_REVISION); - - if (revision >= 0x67) { - printf("(DCC CPLD version 3.%d.%d)\n", - revision >> 4, revision & 0xf); - return 0; - } else { - printf("(DCC CPLD unknown version)\n"); - return -1; - } -} -#endif - -int check_support_card(void) -{ - printf("SC: Micro Support Card "); - return support_card_show_revision(); -} - -void support_card_init(void) -{ - /* - * After power on, we need to keep the LAN controller in reset state - * for a while. (200 usec) - * Fortunatelly, enough wait time is already inserted in pll_init() - * function. So we do not have to wait here. - */ - support_card_reset_deassert(); -} - -#if defined(CONFIG_SMC911X) -#include <netdev.h> - -int board_eth_init(bd_t *bis) -{ - return smc911x_initialize(0, CONFIG_SMC911X_BASE); -} -#endif - -#if !defined(CONFIG_SYS_NO_FLASH) - -#include <mtd/cfi_flash.h> -#include <asm/arch/sbc-regs.h> - -struct memory_bank { - phys_addr_t base; - unsigned long size; -}; - -static int mem_is_flash(const struct memory_bank *mem) -{ - const int loop = 128; - u32 *scratch_addr; - u32 saved_value; - int ret = 1; - int i; - - /* just in case, use the tail of the memory bank */ - scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop, - sizeof(u32) * loop, MAP_NOCACHE); - - for (i = 0; i < loop; i++, scratch_addr++) { - saved_value = readl(scratch_addr); - writel(~saved_value, scratch_addr); - if (readl(scratch_addr) != saved_value) { - /* We assume no memory or SRAM here. */ - writel(saved_value, scratch_addr); - ret = 0; - break; - } - } - - unmap_physmem(scratch_addr, MAP_NOCACHE); - - return ret; -} - -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) - /* {address, size} */ -static const struct memory_bank memory_banks_boot_swap_off[] = { - {0x02000000, 0x01f00000}, -}; - -static const struct memory_bank memory_banks_boot_swap_on[] = { - {0x00000000, 0x01f00000}, -}; -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -static const struct memory_bank memory_banks_boot_swap_off[] = { - {0x04000000, 0x02000000}, -}; - -static const struct memory_bank memory_banks_boot_swap_on[] = { - {0x00000000, 0x02000000}, - {0x04000000, 0x02000000}, -}; -#endif - -static const struct memory_bank -*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT]; - -phys_addr_t cfi_flash_bank_addr(int i) -{ - return flash_banks_list[i]->base; -} - -unsigned long cfi_flash_bank_size(int i) -{ - return flash_banks_list[i]->size; -} - -static void detect_num_flash_banks(void) -{ - const struct memory_bank *memory_bank, *end; - - cfi_flash_num_flash_banks = 0; - - if (boot_is_swapped()) { - memory_bank = memory_banks_boot_swap_on; - end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_on); - } else { - memory_bank = memory_banks_boot_swap_off; - end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_off); - } - - for (; memory_bank < end; memory_bank++) { - if (cfi_flash_num_flash_banks >= - CONFIG_SYS_MAX_FLASH_BANKS_DETECT) - break; - - if (mem_is_flash(memory_bank)) { - flash_banks_list[cfi_flash_num_flash_banks] = - memory_bank; - - debug("flash bank found: base = 0x%lx, size = 0x%lx\n", - memory_bank->base, memory_bank->size); - cfi_flash_num_flash_banks++; - } - } - - debug("number of flash banks: %d\n", cfi_flash_num_flash_banks); -} -#else /* ONFIG_SYS_NO_FLASH */ -void detect_num_flash_banks(void) -{ -}; -#endif /* ONFIG_SYS_NO_FLASH */ - -void support_card_late_init(void) -{ - detect_num_flash_banks(); -} diff --git a/arch/arm/cpu/armv7/uniphier/timer.c b/arch/arm/cpu/armv7/uniphier/timer.c deleted file mode 100644 index 6edc0842a9..0000000000 --- a/arch/arm/cpu/armv7/uniphier/timer.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/arm-mpcore.h> - -#define PERIPHCLK (50 * 1000 * 1000) /* 50 MHz */ -#define PRESCALER ((PERIPHCLK) / (CONFIG_SYS_TIMER_RATE) - 1) - -static void *get_global_timer_base(void) -{ - void *val; - - asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (val) : : "memory"); - - return val + GLOBAL_TIMER_OFFSET; -} - -unsigned long timer_read_counter(void) -{ - /* - * ARM 64bit Global Timer is too much for our purpose. - * We use only lower 32 bit of the timer counter. - */ - return readl(get_global_timer_base() + GTIMER_CNT_L); -} - -int timer_init(void) -{ - /* enable timer */ - writel(PRESCALER << 8 | 1, get_global_timer_base() + GTIMER_CTRL); - - return 0; -} |