diff options
Diffstat (limited to 'arch/arm/dts/armada-385-amc.dts')
| -rw-r--r-- | arch/arm/dts/armada-385-amc.dts | 166 |
1 files changed, 0 insertions, 166 deletions
diff --git a/arch/arm/dts/armada-385-amc.dts b/arch/arm/dts/armada-385-amc.dts deleted file mode 100644 index c9ccbb57ff..0000000000 --- a/arch/arm/dts/armada-385-amc.dts +++ /dev/null @@ -1,166 +0,0 @@ -/* - * Device Tree file for Marvell Armada 385 development board - * (DB-88F6820-AMC) - * - * Copyright (C) 2014 Marvell - * - * Gregory CLEMENT <gregory.clement@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "armada-385.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Marvell Armada 385 AMC"; - compatible = "marvell,a385-amc", "marvell,armada385", "marvell,armada380"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - ethernet0 = ð0; - ethernet1 = ð2; - i2c0 = &i2c0; - spi1 = &spi1; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x80000000>; /* 2 GB */ - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; - - internal-regs { - i2c@11000 { - clock-frequency = <100000>; - u-boot,i2c-slave-addr = <0x0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; - }; - - serial@12000 { - /* - * Exported on the micro USB connector CON16 - * through an FTDI - */ - - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; - u-boot,dm-pre-reloc; - }; - - ethernet@34000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "sgmii"; - }; - - usb@58000 { - status = "okay"; - }; - - ethernet@70000 { - pinctrl-names = "default"; - /* - * The Reference Clock 0 is used to provide a - * clock to the PHY - */ - pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - - - mdio@72004 { - pinctrl-names = "default"; - pinctrl-0 = <&mdio_pins>; - - phy0: ethernet-phy@1 { - reg = <1>; - }; - - phy1: ethernet-phy@0 { - reg = <0>; - }; - }; - - flash@d0000 { - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - }; - }; - - pcie { - status = "okay"; - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - }; - }; -}; - -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; - status = "okay"; - u-boot,dm-pre-reloc; - - spi-flash@0 { - u-boot,dm-pre-reloc; - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p128", "jedec,spi-nor", "spi-flash"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; - m25p,fast-read; - }; -}; - -&refclk { - clock-frequency = <20000000>; -}; |