diff options
Diffstat (limited to 'arch/arm/dts/armada-xp-gp.dts')
| -rw-r--r-- | arch/arm/dts/armada-xp-gp.dts | 167 |
1 files changed, 71 insertions, 96 deletions
diff --git a/arch/arm/dts/armada-xp-gp.dts b/arch/arm/dts/armada-xp-gp.dts index 27799d1254..1139e9469a 100644 --- a/arch/arm/dts/armada-xp-gp.dts +++ b/arch/arm/dts/armada-xp-gp.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Marvell Armada XP development board * (DB-MV784MP-GP) @@ -8,44 +9,6 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the default * 0xd0000000). The 0xf1000000 is the default used by the recent, @@ -68,11 +31,7 @@ stdout-path = "serial0:115200n8"; }; - aliases { - spi0 = &spi0; - }; - - memory { + memory@0 { device_type = "memory"; /* * 8 GB of plug-in RAM modules by default.The amount @@ -98,7 +57,10 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>; + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>; devbus-bootcs { status = "okay"; @@ -128,31 +90,9 @@ }; }; - pcie-controller { - status = "okay"; - - /* - * The 3 slots are physically present as - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@9,0 { - /* Port 2, Lane 0 */ - status = "okay"; - }; - pcie@10,0 { - /* Port 3, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { serial@12000 { status = "okay"; - u-boot,dm-pre-reloc; }; serial@12100 { status = "okay"; @@ -177,43 +117,33 @@ status = "okay"; }; - mdio { - phy0: ethernet-phy@0 { - reg = <16>; - }; - - phy1: ethernet-phy@1 { - reg = <17>; - }; - - phy2: ethernet-phy@2 { - reg = <18>; - }; - - phy3: ethernet-phy@3 { - reg = <19>; - }; - }; - ethernet@70000 { status = "okay"; phy = <&phy0>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <0>; }; ethernet@74000 { status = "okay"; phy = <&phy1>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <1>; }; ethernet@30000 { status = "okay"; phy = <&phy2>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; }; ethernet@34000 { status = "okay"; phy = <&phy3>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; }; /* Front-side USB slot */ @@ -226,27 +156,72 @@ status = "okay"; }; - spi0: spi@10600 { + bm@c0000 { status = "okay"; - u-boot,dm-pre-reloc; - - spi-flash@0 { - u-boot,dm-pre-reloc; - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q128a13", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; }; nand@d0000 { status = "okay"; + label = "pxa3xx_nand-0"; num-cs = <1>; marvell,nand-keep-config; - marvell,nand-enable-arbiter; nand-on-flash-bbt; }; }; + + bm-bppi { + status = "okay"; + }; + }; +}; + +&pciec { + status = "okay"; + + /* + * The 3 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@a,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + phy0: ethernet-phy@0 { + reg = <16>; + }; + + phy1: ethernet-phy@1 { + reg = <17>; + }; + + phy2: ethernet-phy@2 { + reg = <18>; + }; + + phy3: ethernet-phy@3 { + reg = <19>; + }; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; }; }; |