diff options
Diffstat (limited to 'arch/arm/dts/bcm283x.dtsi')
| -rw-r--r-- | arch/arm/dts/bcm283x.dtsi | 57 |
1 files changed, 47 insertions, 10 deletions
diff --git a/arch/arm/dts/bcm283x.dtsi b/arch/arm/dts/bcm283x.dtsi index e45ba584e0..9777644c6c 100644 --- a/arch/arm/dts/bcm283x.dtsi +++ b/arch/arm/dts/bcm283x.dtsi @@ -2,6 +2,8 @@ #include <dt-bindings/clock/bcm2835.h> #include <dt-bindings/clock/bcm2835-aux.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/soc/bcm2835-pm.h> /* firmware-provided startup stubs live here, where the secondary CPUs are * spinning. @@ -20,8 +22,13 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + chosen { - bootargs = "earlyprintk console=ttyAMA0"; + stdout-path = "serial0:115200n8"; }; thermal-zones { @@ -44,7 +51,7 @@ }; }; - soc: soc { + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -60,6 +67,12 @@ clock-frequency = <1000000>; }; + txp@7e004000 { + compatible = "brcm,bcm2835-txp"; + reg = <0x7e004000 0x20>; + interrupts = <1 11>; + }; + dma: dma@7e007000 { compatible = "brcm,bcm2835-dma"; reg = <0x7e007000 0xf00>; @@ -108,9 +121,18 @@ #interrupt-cells = <2>; }; - watchdog@7e100000 { - compatible = "brcm,bcm2835-pm-wdt"; - reg = <0x7e100000 0x28>; + pm: watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; }; clocks: cprman@7e101000 { @@ -130,6 +152,7 @@ rng@7e104000 { compatible = "brcm,bcm2835-rng"; reg = <0x7e104000 0x10>; + interrupts = <2 29>; }; mailbox: mailbox@7e00b880 { @@ -217,6 +240,7 @@ gpclk2_gpio43: gpclk2_gpio43 { brcm,pins = <43>; brcm,function = <BCM2835_FSEL_ALT0>; + brcm,pull = <BCM2835_PUD_OFF>; }; i2c0_gpio0: i2c0_gpio0 { @@ -329,10 +353,12 @@ uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 { brcm,pins = <30 31>; brcm,function = <BCM2835_FSEL_ALT3>; + brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>; }; uart0_gpio32: uart0_gpio32 { brcm,pins = <32 33>; brcm,function = <BCM2835_FSEL_ALT3>; + brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>; }; uart0_gpio36: uart0_gpio36 { brcm,pins = <36 37>; @@ -391,8 +417,8 @@ i2s: i2s@7e203000 { compatible = "brcm,bcm2835-i2s"; - reg = <0x7e203000 0x20>, - <0x7e101098 0x02>; + reg = <0x7e203000 0x24>; + clocks = <&clocks BCM2835_CLOCK_PCM>; dmas = <&dma 2>, <&dma 3>; @@ -432,6 +458,17 @@ interrupts = <2 14>; /* pwa1 */ }; + dpi: dpi@7e208000 { + compatible = "brcm,bcm2835-dpi"; + reg = <0x7e208000 0x8c>; + clocks = <&clocks BCM2835_CLOCK_VPU>, + <&clocks BCM2835_CLOCK_DPI>; + clock-names = "core", "pixel"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + dsi0: dsi@7e209000 { compatible = "brcm,bcm2835-dsi0"; reg = <0x7e209000 0x78>; @@ -459,7 +496,7 @@ status = "disabled"; }; - aux: aux@0x7e215000 { + aux: aux@7e215000 { compatible = "brcm,bcm2835-aux"; #clock-cells = <1>; reg = <0x7e215000 0x8>; @@ -602,6 +639,7 @@ compatible = "brcm,bcm2835-v3d"; reg = <0x7ec00000 0x1000>; interrupts = <1 10>; + power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; }; vc4: gpu { @@ -634,7 +672,6 @@ usbphy: phy { compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; }; - -#include "bcm283x-uboot.dtsi" |