diff options
Diffstat (limited to 'arch/arm/dts/imx6q-logicpd.dts')
| -rw-r--r-- | arch/arm/dts/imx6q-logicpd.dts | 188 |
1 files changed, 88 insertions, 100 deletions
diff --git a/arch/arm/dts/imx6q-logicpd.dts b/arch/arm/dts/imx6q-logicpd.dts index d1e7a389d0..dcea784477 100644 --- a/arch/arm/dts/imx6q-logicpd.dts +++ b/arch/arm/dts/imx6q-logicpd.dts @@ -1,5 +1,5 @@ /* - * Copyright 2017 Logic PD, Inc. + * Copyright 2018 Logic PD, Inc. * Based on SabreSD, Copyright 2016 Freescale Semiconductor, Inc. * * This file is dual-licensed: you can use it either under the terms @@ -42,149 +42,137 @@ */ /dts-v1/; - -#include "imx6qdl-logicpd.dtsi" +#include "imx6q.dtsi" +#include "imx6-logicpd-som.dtsi" +#include "imx6-logicpd-baseboard.dtsi" / { - model = "Logic PD i.MX6QDL SOM"; + model = "Logic PD i.MX6QD SOM-M3 (HDMI)"; compatible = "fsl,imx6q"; - reg_usb_otg_vbus: regulator-otg-vbus@0 { - compatible = "regulator-fixed"; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; - enable-active-high; + backlight: backlight_lvds { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 20000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <®_lcd>; }; - reg_usb_h1_vbus: regulator-usbh1vbus@1 { + reg_lcd: regulator-lcd { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_reg>; compatible = "regulator-fixed"; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + regulator-name = "lcd_panel_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + vin-supply = <®_3v3>; + startup-delay-us = <500000>; }; - reg_3v3: regulator-3v3@2 { + lcd_reset: lcd_reset { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_reset>; compatible = "regulator-fixed"; - regulator-name = "reg_3v3"; + regulator-name = "nLCD_RESET"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <®_lcd>; + }; + + panel-lvds0 { + compatible = "ampire,am800480b3tmqw"; + backlight = <&backlight>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; }; }; -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; +&hdmi { + ddc-i2c-bus = <&i2c3>; status = "okay"; }; -&usbh1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; +&i2c1 { + ili_touch: ilitouch@26 { + compatible = "ili,ili2117a"; + reg = <0x26>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>; + ili2117a,poll-period = <10>; + ili2117a,max-touch = <2>; + }; }; -&usbh2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh2>; - phy_type = "hsic"; - disable-over-current; - status = "okay"; +®_hdmi { + regulator-always-on; }; -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; +&ldb { status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; + }; -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rmii"; - phy-speed = <10>; +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>; +}; + +&pwm3 { status = "okay"; }; &usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - no-1-8-v; - keep-power-in-suspend; - status = "okay"; }; &iomuxc { - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 - MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 - MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 - MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 /* nINT */ - MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 /* Ethernet Reset */ - >; - }; - - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x130b0 - MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x130b0 - MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x130b0 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 - >; - }; - pinctrl_uart3: uart3grp { + pinctrl_lcd_reg: lcdreg { fsl,pins = < - MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x100b0 /* R_LCD_PANEL_PWR */ >; }; - pinctrl_usbh1: usbh1grp { + pinctrl_lcd_reset: lcdreset { fsl,pins = < - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* USB_H1_PWR_EN */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 /* LCD_nRESET */ >; }; - pinctrl_usbh2: usbh2grp { + pinctrl_touchscreen: touchscreengrp { fsl,pins = < - MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x17030 - MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x13030 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 /* USB_OTG_PWR_EN */ - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* TOUCH_nPINTDAV */ >; }; }; + |