diff options
Diffstat (limited to 'arch/arm/dts/logicpd-som-lv.dtsi')
-rw-r--r-- | arch/arm/dts/logicpd-som-lv.dtsi | 68 |
1 files changed, 66 insertions, 2 deletions
diff --git a/arch/arm/dts/logicpd-som-lv.dtsi b/arch/arm/dts/logicpd-som-lv.dtsi index c1aa7a4518..3bb28c03ca 100644 --- a/arch/arm/dts/logicpd-som-lv.dtsi +++ b/arch/arm/dts/logicpd-som-lv.dtsi @@ -26,7 +26,7 @@ gpio = <&gpio1 3 0>; /* gpio_3 */ startup-delay-us = <70000>; enable-active-high; - vin-supply = <&vmmc2>; + vin-supply = <&vaux3>; }; /* HS USB Host PHY on PORT 1 */ @@ -35,6 +35,13 @@ reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */ #phy-cells = <0>; }; + + /* fixed 26MHz oscillator */ + hfclk_26m: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; }; &gpmc { @@ -71,26 +78,54 @@ }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; clock-frequency = <2600000>; twl: twl@48 { reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + clocks = <&hfclk_26m>; + clock-names = "fck"; twl_audio: audio { compatible = "ti,twl4030-audio"; codec { + ti,hs_extmute_gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; }; }; }; }; &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; }; &i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; + + touchscreen: tsc2004@48 { + compatible = "ti,tsc2004"; + reg = <0x48>; + vio-supply = <&vaux1>; + pinctrl-names = "default"; + pinctrl-0 = <&tsc2004_pins>; + interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */ + + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + touchscreen-fuzz-pressure = <2>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + touchscreen-max-pressure = <2048>; + + ti,x-plate-ohms = <280>; + ti,esd-recovery-timeout-ms = <8000>; + }; }; &mmc3 { @@ -189,7 +224,19 @@ >; }; + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ + >; + }; + tsc2004_pins: pinmux_tsc2004_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */ + >; + }; }; &omap3_pmx_wkup { @@ -202,10 +249,22 @@ }; wl127x_gpio: pinmux_wl127x_gpio_pin { pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */ + OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ >; }; + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + >; + }; + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ + >; + }; }; &omap3_pmx_core2 { @@ -237,6 +296,11 @@ #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" +&vaux3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + &twl { twl_power: power { compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle"; |