diff options
Diffstat (limited to 'arch/arm/dts/r8a77995-draak.dts')
| -rw-r--r-- | arch/arm/dts/r8a77995-draak.dts | 31 |
1 files changed, 17 insertions, 14 deletions
diff --git a/arch/arm/dts/r8a77995-draak.dts b/arch/arm/dts/r8a77995-draak.dts index a7dc11e36f..67634cb01d 100644 --- a/arch/arm/dts/r8a77995-draak.dts +++ b/arch/arm/dts/r8a77995-draak.dts @@ -19,11 +19,6 @@ ethernet0 = &avb; }; - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; - stdout-path = "serial0:115200n8"; - }; - backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 50000>; @@ -35,6 +30,11 @@ enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; }; + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:115200n8"; + }; + composite-in { compatible = "composite-video-connector"; @@ -97,7 +97,7 @@ reg = <0x0 0x48000000 0x0 0x18000000>; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -106,7 +106,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -115,7 +115,7 @@ regulator-always-on; }; - reg_12p0v: regulator1 { + reg_12p0v: regulator-12p0v { compatible = "regulator-fixed"; regulator-name = "D12.0V"; regulator-min-microvolt = <12000000>; @@ -175,6 +175,14 @@ reg = <0>; interrupt-parent = <&gpio5>; interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + /* + * TX clock internal delay mode is required for reliable + * 1Gbps communication using the KSZ9031RNX phy present on + * the Draak board, however, TX clock internal delay mode + * isn't supported on r8a77995. Thus, limit speed to + * 100Mbps for reliable communication. + */ + max-speed = <100>; }; }; @@ -511,12 +519,7 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - + port { vin4_in: endpoint { remote-endpoint = <&adv7180_out>; }; |