summaryrefslogtreecommitdiff
path: root/arch/arm/dts/rk3399-nanopi4.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/dts/rk3399-nanopi4.dtsi')
-rw-r--r--arch/arm/dts/rk3399-nanopi4.dtsi66
1 files changed, 60 insertions, 6 deletions
diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi
index d325e11728..c88018a0ef 100644
--- a/arch/arm/dts/rk3399-nanopi4.dtsi
+++ b/arch/arm/dts/rk3399-nanopi4.dtsi
@@ -48,7 +48,7 @@
};
/* switched by pmic_sleep */
- vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ vcc1v8_s3: vcc1v8-s3 {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
@@ -71,6 +71,27 @@
vin-supply = <&vcc3v3_sys>;
};
+ /*
+ * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only
+ * drives the enable pin, but we can't quite model that.
+ */
+ vcca0v9_s3: vcca0v9-s3 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vcca0v9_s3";
+ vin-supply = <&vcc1v8_s3>;
+ };
+
+ /* As above, actually supplied by vcc3v3_sys */
+ vcca1v8_s3: vcca1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_s3";
+ vin-supply = <&vcc1v8_s3>;
+ };
+
vbus_typec: vbus-typec {
compatible = "regulator-fixed";
regulator-min-microvolt = <5000000>;
@@ -148,15 +169,28 @@
assigned-clocks = <&cru SCLK_RMII_SRC>;
clock_in_out = "input";
pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
+ pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
+ phy-handle = <&rtl8211e>;
phy-mode = "rgmii";
phy-supply = <&vcc3v3_s3>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
tx_delay = <0x28>;
rx_delay = <0x11>;
status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtl8211e: phy@1 {
+ reg = <1>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&gpu {
@@ -171,6 +205,10 @@
status = "okay";
};
+&hdmi_sound {
+ status = "okay";
+};
+
&i2c0 {
clock-frequency = <400000>;
i2c-scl-rising-time-ns = <160>;
@@ -446,6 +484,10 @@
status = "okay";
};
+&i2s2 {
+ status = "okay";
+};
+
&io_domains {
bt656-supply = <&vcc_1v8>;
audio-supply = <&vcca1v8_codec>;
@@ -464,7 +506,9 @@
&pcie0 {
ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
max-link-speed = <2>;
- num-lanes = <4>;
+ num-lanes = <2>;
+ vpcie0v9-supply = <&vcca0v9_s3>;
+ vpcie1v8-supply = <&vcca1v8_s3>;
status = "okay";
};
@@ -481,6 +525,16 @@
};
};
+ phy {
+ phy_intb: phy-intb {
+ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ phy_rstb: phy-rstb {
+ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
cpu_b_sleep: cpu-b-sleep {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;