diff options
Diffstat (limited to 'arch/arm/dts/rk3399-orangepi.dts')
| -rw-r--r-- | arch/arm/dts/rk3399-orangepi.dts | 79 |
1 files changed, 68 insertions, 11 deletions
diff --git a/arch/arm/dts/rk3399-orangepi.dts b/arch/arm/dts/rk3399-orangepi.dts index cf37b96a6b..f9f7246d4d 100644 --- a/arch/arm/dts/rk3399-orangepi.dts +++ b/arch/arm/dts/rk3399-orangepi.dts @@ -136,13 +136,13 @@ vin-supply = <&vcc_sys>; }; - vcc5v0_typec0: vcc5v0-typec0-regulator { + vbus_typec: vbus-typec-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec0_en>; - regulator-name = "vcc5v0_typec0"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vbus_typec"; vin-supply = <&vcc_sys>; }; @@ -202,14 +202,27 @@ clock_in_out = "input"; phy-supply = <&vcc3v3_s3>; phy-mode = "rgmii"; + phy-handle = <&rtl8211e>; pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; + pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>; tx_delay = <0x28>; rx_delay = <0x11>; status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211e: phy@1 { + reg = <1>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + }; + }; }; &gpu { @@ -419,6 +432,8 @@ compatible = "silergy,syr827"; reg = <0x40>; fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&cpu_b_sleep>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -436,6 +451,8 @@ compatible = "silergy,syr828"; reg = <0x41>; fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpu_sleep>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -472,6 +489,7 @@ compatible = "asahi-kasei,ak09911"; reg = <0x0c>; vdd-supply = <&vcc3v3_s3>; + vid-supply = <&vcc3v3_s3>; }; mpu6500@68 { @@ -504,6 +522,16 @@ pinctrl-0 = <&light_int_l>; vdd-supply = <&vcc3v3_s3>; }; + + fusb302@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&chg_cc_int_l>; + vbus-supply = <&vbus_typec>; + }; }; &io_domains { @@ -526,7 +554,25 @@ }; }; + phy { + phy_intb: phy-intb { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rstb: phy-rstb { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { + cpu_b_sleep: cpu-b-sleep { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + gpu_sleep: gpu-sleep { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; @@ -536,7 +582,7 @@ sd { sdmmc0_pwr_h: sdmmc0-pwr-h { rockchip,pins = - <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -546,7 +592,7 @@ <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; - vcc5v0_typec0_en: vcc5v0-typec0-en { + vcc5v0_typec_en: vcc5v0-typec-en { rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; @@ -595,6 +641,12 @@ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + fusb302 { + chg_cc_int_l: chg-cc-int-l { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; }; &pwm0 { @@ -631,9 +683,12 @@ pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; sd-uhs-sdr104; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; brcmf: wifi@1 { + reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; @@ -676,7 +731,7 @@ status = "okay"; u2phy0_otg: otg-port { - phy-supply = <&vcc5v0_typec0>; + phy-supply = <&vbus_typec>; status = "okay"; }; @@ -707,12 +762,14 @@ bluetooth { compatible = "brcm,bcm43438-bt"; clocks = <&rk808 1>; - clock-names = "ext_clock"; + clock-names = "lpo"; device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; }; }; |