diff options
Diffstat (limited to 'arch/arm/dts/salvator-common.dtsi')
| -rw-r--r-- | arch/arm/dts/salvator-common.dtsi | 85 |
1 files changed, 71 insertions, 14 deletions
diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi index 7b19549d38..a36e0ebca0 100644 --- a/arch/arm/dts/salvator-common.dtsi +++ b/arch/arm/dts/salvator-common.dtsi @@ -52,7 +52,7 @@ */ compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <11289600>; + clock-frequency = <12288000>; }; backlight: backlight { @@ -255,9 +255,8 @@ &avb { pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; - renesas,no-ether-link; phy-handle = <&phy0>; - reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + phy-mode = "rgmii-txid"; status = "okay"; phy0: ethernet-phy@0 { @@ -265,6 +264,7 @@ reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; }; }; @@ -283,6 +283,7 @@ }; &ehci0 { + dr_mode = "otg"; status = "okay"; }; @@ -295,6 +296,7 @@ }; &hsusb { + dr_mode = "otg"; status = "okay"; }; @@ -337,6 +339,13 @@ &i2c4 { status = "okay"; + pca9654: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + csa_vdd: adc@7c { compatible = "maxim,max9611"; reg = <0x7c>; @@ -354,9 +363,34 @@ &i2c_dvfs { status = "okay"; + + pmic: pmic@30 { + pinctrl-0 = <&irq0_pins>; + pinctrl-names = "default"; + + compatible = "rohm,bd9571mwv"; + reg = <0x30>; + interrupt-parent = <&intc_ex>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + regulators { + dvfs: dvfs { + regulator-name = "dvfs"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1030000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &ohci0 { + dr_mode = "otg"; status = "okay"; }; @@ -382,8 +416,7 @@ avb_pins: avb { mux { - groups = "avb_link", "avb_phy_int", "avb_mdc", - "avb_mii"; + groups = "avb_link", "avb_mdc", "avb_mii"; function = "avb"; }; @@ -409,6 +442,11 @@ function = "i2c2"; }; + irq0_pins: irq0 { + groups = "intc_ex_irq0"; + function = "intc_ex"; + }; + pwm1_pins: pwm1 { groups = "pwm1_a"; function = "pwm1"; @@ -497,6 +535,11 @@ bias-pull-down; }; }; + + usb30_pins: usb30 { + groups = "usb30"; + function = "usb30"; + }; }; &pwm1 { @@ -576,10 +619,7 @@ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; bus-width = <4>; sd-uhs-sdr50; - sd-uhs-sdr104; status = "okay"; - - max-frequency = <208000000>; }; &sdhi2 { @@ -591,12 +631,10 @@ vmmc-supply = <®_3p3v>; vqmmc-supply = <®_1p8v>; bus-width = <8>; - mmc-ddr-1_8v; mmc-hs200-1_8v; non-removable; + fixed-emmc-driver-type = <1>; status = "okay"; - - max-frequency = <200000000>; }; &sdhi3 { @@ -610,16 +648,17 @@ wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; bus-width = <4>; sd-uhs-sdr50; - sd-uhs-sdr104; status = "okay"; - - max-frequency = <208000000>; }; &ssi1 { shared-pin; }; +&usb_extal_clk { + clock-frequency = <50000000>; +}; + &usb2_phy0 { pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; @@ -635,11 +674,29 @@ status = "okay"; }; +&usb3_peri0 { + phys = <&usb3_phy0>; + phy-names = "usb"; + + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3s0_clk { + clock-frequency = <100000000>; +}; + &wdt0 { timeout-sec = <60>; status = "okay"; }; &xhci0 { + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + status = "okay"; }; |