diff options
Diffstat (limited to 'arch/arm/dts/sun8i-h3-orangepi-plus.dts')
| -rw-r--r-- | arch/arm/dts/sun8i-h3-orangepi-plus.dts | 127 |
1 files changed, 27 insertions, 100 deletions
diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts index 900ec4fc8c..28f74f6ffd 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts @@ -40,26 +40,13 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/dts-v1/; -#include "sun8i-h3.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> +/* The Orange Pi Plus is an extended version of the Orange Pi 2 */ +#include "sun8i-h3-orangepi-2.dts" / { - model = "Xunlong Orange Pi Plus"; + model = "Xunlong Orange Pi Plus / Plus 2 / Plus 2E"; compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -71,75 +58,42 @@ enable-active-high; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>; - - status_led { - label = "status:red:user"; - gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; - }; - }; - - r_leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_r_opc>; - - tx { - label = "pwr:green:user"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - r_gpio_keys { - compatible = "gpio-keys"; - input-name = "sw4"; - - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; +&ehci2 { + status = "okay"; +}; - sw4@0 { - label = "sw4"; - linux,code = <BTN_0>; - gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; - }; - }; +&ehci3 { + status = "okay"; }; -&pio { - leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; }; -&r_pio { - leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + /* eMMC is missing pull-ups */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; - sw_r_opc: key_pins@0 { - allwinner,pins = "PL03"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; +&ohci1 { + status = "okay"; }; -&ehci1 { +&ohci2 { status = "okay"; }; -&ehci3 { +&ohci3 { status = "okay"; }; @@ -152,33 +106,6 @@ }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; - status = "okay"; -}; - -®_usb1_vbus { - gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usb1_vbus_pin_a { - allwinner,pins = "PG13"; -}; - &usbphy { - usb1_vbus-supply = <®_usb1_vbus>; usb3_vbus-supply = <®_usb3_vbus>; - status = "okay"; }; |