diff options
Diffstat (limited to 'arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts')
| -rw-r--r-- | arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts | 210 |
1 files changed, 210 insertions, 0 deletions
diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts new file mode 100644 index 0000000000..d6a010355b --- /dev/null +++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts @@ -0,0 +1,210 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP zc1751-xm017-dc3 + * + * (C) Copyright 2016 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" + +/ { + model = "ZynqMP zc1751-xm017-dc3 RevA"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + gpio0 = &gpio; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + usb0 = &usb0; + usb1 = &usb1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@0 { /* VSC8211 */ + reg = <0>; + }; +}; + +&gpio { + status = "okay"; +}; + +/* just eeprom here */ +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u26: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + /* IRQ not connected */ + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +/* eeprom24c02 and SE98A temp chip pca9306 */ +&i2c1 { + status = "okay"; + clock-frequency = <400000>; +}; + +/* MT29F64G08AECDBJ4-6 */ +&nand0 { + status = "okay"; + arasan,has-mdma; + num-cs = <2>; + + partition@0 { /* for testing purpose */ + label = "nand-fsbl-uboot"; + reg = <0x0 0x0 0x400000>; + }; + partition@1 { /* for testing purpose */ + label = "nand-linux"; + reg = <0x0 0x400000 0x1400000>; + }; + partition@2 { /* for testing purpose */ + label = "nand-device-tree"; + reg = <0x0 0x1800000 0x400000>; + }; + partition@3 { /* for testing purpose */ + label = "nand-rootfs"; + reg = <0x0 0x1C00000 0x1400000>; + }; + partition@4 { /* for testing purpose */ + label = "nand-bitstream"; + reg = <0x0 0x3000000 0x400000>; + }; + partition@5 { /* for testing purpose */ + label = "nand-misc"; + reg = <0x0 0x3400000 0xFCC00000>; + }; + + partition@6 { /* for testing purpose */ + label = "nand1-fsbl-uboot"; + reg = <0x1 0x0 0x400000>; + }; + partition@7 { /* for testing purpose */ + label = "nand1-linux"; + reg = <0x1 0x400000 0x1400000>; + }; + partition@8 { /* for testing purpose */ + label = "nand1-device-tree"; + reg = <0x1 0x1800000 0x400000>; + }; + partition@9 { /* for testing purpose */ + label = "nand1-rootfs"; + reg = <0x1 0x1C00000 0x1400000>; + }; + partition@10 { /* for testing purpose */ + label = "nand1-bitstream"; + reg = <0x1 0x3000000 0x400000>; + }; + partition@11 { /* for testing purpose */ + label = "nand1-misc"; + reg = <0x1 0x3400000 0xFCC00000>; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA phy OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +&sdhci1 { /* emmc with some settings */ + status = "okay"; +}; + +/* main */ +&uart0 { + status = "okay"; +}; + +/* DB9 */ +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +/* ULPI SMSC USB3320 */ +&usb1 { + status = "okay"; + dr_mode = "host"; +}; |