diff options
Diffstat (limited to 'arch/arm/dts')
39 files changed, 2710 insertions, 127 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index c37580ed84..c34606334d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -22,6 +22,7 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra20-ventana.dtb \ tegra20-whistler.dtb \ tegra20-colibri_t20_iris.dtb \ + tegra30-apalis.dtb \ tegra30-beaver.dtb \ tegra30-cardhu.dtb \ tegra30-colibri.dtb \ diff --git a/arch/arm/dts/am335x-bone-common.dtsi b/arch/arm/dts/am335x-bone-common.dtsi index 2f66deda9f..e70b4d1f1f 100644 --- a/arch/arm/dts/am335x-bone-common.dtsi +++ b/arch/arm/dts/am335x-bone-common.dtsi @@ -10,6 +10,10 @@ model = "TI AM335x BeagleBone"; compatible = "ti,am335x-bone", "ti,am33xx"; + chosen { + stdout-path = &uart0; + }; + cpus { cpu@0 { cpu0-supply = <&dcdc2_reg>; diff --git a/arch/arm/dts/dt-bindings/gpio/gpio.h b/arch/arm/dts/dt-bindings/gpio/gpio.h deleted file mode 100644 index e6b1e0a808..0000000000 --- a/arch/arm/dts/dt-bindings/gpio/gpio.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * This header provides constants for most GPIO bindings. - * - * Most GPIO bindings include a flags cell as part of the GPIO specifier. - * In most cases, the format of the flags cell uses the standard values - * defined in this header. - */ - -#ifndef _DT_BINDINGS_GPIO_GPIO_H -#define _DT_BINDINGS_GPIO_GPIO_H - -#define GPIO_ACTIVE_HIGH 0 -#define GPIO_ACTIVE_LOW 1 - -#endif diff --git a/arch/arm/dts/dt-bindings/pinctrl/am33xx.h b/arch/arm/dts/dt-bindings/pinctrl/am33xx.h deleted file mode 100644 index 2fbc804e1a..0000000000 --- a/arch/arm/dts/dt-bindings/pinctrl/am33xx.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This header provides constants specific to AM33XX pinctrl bindings. - */ - -#ifndef _DT_BINDINGS_PINCTRL_AM33XX_H -#define _DT_BINDINGS_PINCTRL_AM33XX_H - -#include <dt-bindings/pinctrl/omap.h> - -/* am33xx specific mux bit defines */ -#undef PULL_ENA -#undef INPUT_EN - -#define PULL_DISABLE (1 << 3) -#define INPUT_EN (1 << 5) -#define SLEWCTRL_FAST (1 << 6) - -/* update macro depending on INPUT_EN and PULL_ENA */ -#undef PIN_OUTPUT -#undef PIN_OUTPUT_PULLUP -#undef PIN_OUTPUT_PULLDOWN -#undef PIN_INPUT -#undef PIN_INPUT_PULLUP -#undef PIN_INPUT_PULLDOWN - -#define PIN_OUTPUT (PULL_DISABLE) -#define PIN_OUTPUT_PULLUP (PULL_UP) -#define PIN_OUTPUT_PULLDOWN 0 -#define PIN_INPUT (INPUT_EN | PULL_DISABLE) -#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP) -#define PIN_INPUT_PULLDOWN (INPUT_EN) - -/* undef non-existing modes */ -#undef PIN_OFF_NONE -#undef PIN_OFF_OUTPUT_HIGH -#undef PIN_OFF_OUTPUT_LOW -#undef PIN_OFF_INPUT_PULLUP -#undef PIN_OFF_INPUT_PULLDOWN -#undef PIN_OFF_WAKEUPENABLE - -#endif - diff --git a/arch/arm/dts/dt-bindings/pinctrl/omap.h b/arch/arm/dts/dt-bindings/pinctrl/omap.h deleted file mode 100644 index edbd250809..0000000000 --- a/arch/arm/dts/dt-bindings/pinctrl/omap.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This header provides constants for OMAP pinctrl bindings. - * - * Copyright (C) 2009 Nokia - * Copyright (C) 2009-2010 Texas Instruments - */ - -#ifndef _DT_BINDINGS_PINCTRL_OMAP_H -#define _DT_BINDINGS_PINCTRL_OMAP_H - -/* 34xx mux mode options for each pin. See TRM for options */ -#define MUX_MODE0 0 -#define MUX_MODE1 1 -#define MUX_MODE2 2 -#define MUX_MODE3 3 -#define MUX_MODE4 4 -#define MUX_MODE5 5 -#define MUX_MODE6 6 -#define MUX_MODE7 7 - -/* 24xx/34xx mux bit defines */ -#define PULL_ENA (1 << 3) -#define PULL_UP (1 << 4) -#define ALTELECTRICALSEL (1 << 5) - -/* 34xx specific mux bit defines */ -#define INPUT_EN (1 << 8) -#define OFF_EN (1 << 9) -#define OFFOUT_EN (1 << 10) -#define OFFOUT_VAL (1 << 11) -#define OFF_PULL_EN (1 << 12) -#define OFF_PULL_UP (1 << 13) -#define WAKEUP_EN (1 << 14) - -/* 44xx specific mux bit defines */ -#define WAKEUP_EVENT (1 << 15) - -/* Active pin states */ -#define PIN_OUTPUT 0 -#define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP) -#define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA) -#define PIN_INPUT INPUT_EN -#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP) -#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN) - -/* Off mode states */ -#define PIN_OFF_NONE 0 -#define PIN_OFF_OUTPUT_HIGH (OFF_EN | OFFOUT_EN | OFFOUT_VAL) -#define PIN_OFF_OUTPUT_LOW (OFF_EN | OFFOUT_EN) -#define PIN_OFF_INPUT_PULLUP (OFF_EN | OFF_PULL_EN | OFF_PULL_UP) -#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFF_PULL_EN) -#define PIN_OFF_WAKEUPENABLE WAKEUP_EN - -#endif - diff --git a/arch/arm/dts/exynos4.dtsi b/arch/arm/dts/exynos4.dtsi index 110eb43a2f..77fad48fb4 100644 --- a/arch/arm/dts/exynos4.dtsi +++ b/arch/arm/dts/exynos4.dtsi @@ -7,9 +7,16 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { + combiner: interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x10440000 0x1000>; + }; + serial@13800000 { compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x3c>; diff --git a/arch/arm/dts/exynos4210-origen.dts b/arch/arm/dts/exynos4210-origen.dts index 15059d2202..dd2476c1a3 100644 --- a/arch/arm/dts/exynos4210-origen.dts +++ b/arch/arm/dts/exynos4210-origen.dts @@ -8,8 +8,8 @@ */ /dts-v1/; -/include/ "skeleton.dtsi" -/include/ "exynos4.dtsi" +#include "skeleton.dtsi" +#include "exynos4210.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4210"; diff --git a/arch/arm/dts/exynos4210-pinctrl-uboot.dtsi b/arch/arm/dts/exynos4210-pinctrl-uboot.dtsi new file mode 100644 index 0000000000..ee071c162f --- /dev/null +++ b/arch/arm/dts/exynos4210-pinctrl-uboot.dtsi @@ -0,0 +1,27 @@ +/* + * U-Boot additions to enable a generic Exynos GPIO driver + * + * Copyright (c) 2014 Google, Inc + */ + +/{ + pinctrl_0: pinctrl@11400000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos4210-pinctrl"; + }; + + pinctrl_1: pinctrl@11000000 { + #address-cells = <1>; + #size-cells = <0>; + gpy0: gpy0 { + reg = <0xc00>; + }; + }; + + pinctrl_2: pinctrl@03860000 { + #address-cells = <1>; + #size-cells = <0>; + }; + +}; diff --git a/arch/arm/dts/exynos4210-pinctrl.dtsi b/arch/arm/dts/exynos4210-pinctrl.dtsi new file mode 100644 index 0000000000..bda17f79f4 --- /dev/null +++ b/arch/arm/dts/exynos4210-pinctrl.dtsi @@ -0,0 +1,304 @@ +/* + * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2011-2012 Linaro Ltd. + * www.linaro.org + * + * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe2: gpe2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe3: gpe3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe4: gpe4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + pinctrl@11000000 { + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl1: gpl1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl2: gpl2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + pinctrl@03860000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + }; + + }; +}; diff --git a/arch/arm/dts/exynos4210-smdkv310.dts b/arch/arm/dts/exynos4210-smdkv310.dts index c390c8f0c8..00cad0447d 100644 --- a/arch/arm/dts/exynos4210-smdkv310.dts +++ b/arch/arm/dts/exynos4210-smdkv310.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "exynos4.dtsi" +#include "exynos4.dtsi" / { model = "Samsung SMDKV310 on Exynos4210"; diff --git a/arch/arm/dts/exynos4210-trats.dts b/arch/arm/dts/exynos4210-trats.dts index 0ff69393b7..81188bca13 100644 --- a/arch/arm/dts/exynos4210-trats.dts +++ b/arch/arm/dts/exynos4210-trats.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "exynos4.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung Trats based on Exynos4210"; diff --git a/arch/arm/dts/exynos4210-universal_c210.dts b/arch/arm/dts/exynos4210-universal_c210.dts index 6941906aaa..9139810b1a 100644 --- a/arch/arm/dts/exynos4210-universal_c210.dts +++ b/arch/arm/dts/exynos4210-universal_c210.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "exynos4.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung Universal C210 based on Exynos4210 rev0"; @@ -41,6 +41,19 @@ status = "disabled"; }; + soft-spi { + compatible = "u-boot,soft-spi"; + cs-gpio = <&gpio 235 0>; /* Y43 */ + sclk-gpio = <&gpio 225 0>; /* Y31 */ + mosi-gpio = <&gpio 227 0>; /* Y33 */ + miso-gpio = <&gpio 224 0>; /* Y30 */ + spi-delay-us = <1>; + #address-cells = <1>; + #size-cells = <0>; + cs@0 { + }; + }; + fimd@11c00000 { compatible = "samsung,exynos-fimd"; reg = <0x11c00000 0xa4>; diff --git a/arch/arm/dts/exynos4210.dtsi b/arch/arm/dts/exynos4210.dtsi new file mode 100644 index 0000000000..634a5c1dd2 --- /dev/null +++ b/arch/arm/dts/exynos4210.dtsi @@ -0,0 +1,156 @@ +/* + * Samsung's Exynos4210 SoC device tree source + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "exynos4.dtsi" +#include "exynos4210-pinctrl.dtsi" +#include "exynos4210-pinctrl-uboot.dtsi" + +/ { + compatible = "samsung,exynos4210"; + + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + }; + + pd_lcd1: lcd1-power-domain@10023CA0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + }; + + gic: interrupt-controller@10490000 { + cpu-offset = <0x8000>; + }; + + combiner: interrupt-controller@10440000 { + samsung,combiner-nr = <16>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + }; + + mct@10050000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x10050000 0x800>; + interrupt-parent = <&mct_map>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; + clocks = <&clock 3>, <&clock 344>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &gic 0 57 0>, + <1 &gic 0 69 0>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 0 42 0>, + <5 &gic 0 48 0>; + }; + }; + + clock: clock-controller@10030000 { + compatible = "samsung,exynos4210-clock"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&combiner>; + interrupts = <2 2>, <3 2>; + }; + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos4210-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 47 0>; + }; + + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,exynos4210-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <0 46 0>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_2: pinctrl@03860000 { + compatible = "samsung,exynos4210-pinctrl"; + reg = <0x03860000 0x1000>; + }; + + tmu@100C0000 { + compatible = "samsung,exynos4210-tmu"; + interrupt-parent = <&combiner>; + reg = <0x100C0000 0x100>; + interrupts = <2 4>; + clocks = <&clock 383>; + clock-names = "tmu_apbif"; + status = "disabled"; + }; + + g2d@12800000 { + compatible = "samsung,s5pv210-g2d"; + reg = <0x12800000 0x1000>; + interrupts = <0 89 0>; + clocks = <&clock 177>, <&clock 277>; + clock-names = "sclk_fimg2d", "fimg2d"; + status = "disabled"; + }; + + camera { + clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>; + clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; + + fimc_0: fimc@11800000 { + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; + }; + + fimc_1: fimc@11810000 { + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; + }; + + fimc_2: fimc@11820000 { + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,lcd-wb; + }; + + fimc_3: fimc@11830000 { + samsung,pix-limits = <1920 8192 1366 1920>; + samsung,rotators = <0>; + samsung,mainscaler-ext; + samsung,lcd-wb; + }; + }; +}; diff --git a/arch/arm/dts/exynos4412-odroid.dts b/arch/arm/dts/exynos4412-odroid.dts index 24d0bf18e3..4c5e2b39be 100644 --- a/arch/arm/dts/exynos4412-odroid.dts +++ b/arch/arm/dts/exynos4412-odroid.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "exynos4.dtsi" +#include "exynos4.dtsi" / { model = "Odroid based on Exynos4412"; diff --git a/arch/arm/dts/exynos4412-trats2.dts b/arch/arm/dts/exynos4412-trats2.dts index cc58c878b8..3b1e4588b5 100644 --- a/arch/arm/dts/exynos4412-trats2.dts +++ b/arch/arm/dts/exynos4412-trats2.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "exynos4.dtsi" +#include "exynos4412.dtsi" / { model = "Samsung Trats2 based on Exynos4412"; diff --git a/arch/arm/dts/exynos4412.dtsi b/arch/arm/dts/exynos4412.dtsi new file mode 100644 index 0000000000..87b339c739 --- /dev/null +++ b/arch/arm/dts/exynos4412.dtsi @@ -0,0 +1,38 @@ +/* + * Samsung's Exynos4412 SoC device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "exynos4x12.dtsi" + +/ { + compatible = "samsung,exynos4412"; + + gic: interrupt-controller@10490000 { + cpu-offset = <0x4000>; + }; + + interrupt-controller@10440000 { + samsung,combiner-nr = <20>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>; + }; + +}; diff --git a/arch/arm/dts/exynos4x12-pinctrl-uboot.dtsi b/arch/arm/dts/exynos4x12-pinctrl-uboot.dtsi new file mode 100644 index 0000000000..c02796d2b3 --- /dev/null +++ b/arch/arm/dts/exynos4x12-pinctrl-uboot.dtsi @@ -0,0 +1,46 @@ +/* + * U-Boot additions to enable a generic Exynos GPIO driver + * + * Copyright (c) 2014 Google, Inc + */ + +/{ + pinctrl_0: pinctrl@11400000 { + #address-cells = <1>; + #size-cells = <0>; + gpf0: gpf0 { + reg = <0xc180>; + }; + gpj0: gpj0 { + reg = <0x240>; + }; + }; + + pinctrl_1: pinctrl@11000000 { + #address-cells = <1>; + #size-cells = <0>; + gpk0: gpk0 { + reg = <0x40>; + }; + gpm0: gpm0 { + reg = <0x260>; + }; + gpy0: gpy0 { + reg = <0x120>; + }; + gpx0: gpx0 { + reg = <0xc00>; + }; + }; + + pinctrl_2: pinctrl@03860000 { + #address-cells = <1>; + #size-cells = <0>; + }; + + pinctrl_3: pinctrl@106E0000 { + #address-cells = <1>; + #size-cells = <0>; + }; + +}; diff --git a/arch/arm/dts/exynos4x12-pinctrl.dtsi b/arch/arm/dts/exynos4x12-pinctrl.dtsi new file mode 100644 index 0000000000..93f39983b4 --- /dev/null +++ b/arch/arm/dts/exynos4x12-pinctrl.dtsi @@ -0,0 +1,344 @@ +/* + * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pinctrl@11000000 { + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl1: gpl1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl2: gpl2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm0: gpm0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm1: gpm1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm2: gpm2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm3: gpm3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm4: gpm4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pinctrl@03860000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pinctrl@106E0000 { + gpv0: gpv0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv1: gpv1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv2: gpv2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv3: gpv3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv4: gpv4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm/dts/exynos4x12.dtsi b/arch/arm/dts/exynos4x12.dtsi new file mode 100644 index 0000000000..5d58c6eedc --- /dev/null +++ b/arch/arm/dts/exynos4x12.dtsi @@ -0,0 +1,115 @@ +/* + * Samsung's Exynos4x12 SoCs device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4x12 SoCs device nodes are listed in this file. Exynos4x12 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as +` * published by the Free Software Foundation. +*/ + +#include "exynos4.dtsi" +#include "exynos4x12-pinctrl.dtsi" +#include "exynos4x12-pinctrl-uboot.dtsi" + +/ { + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + mshc0 = &mshc_0; + }; + + pd_isp: isp-power-domain@10023CA0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + }; + + clock: clock-controller@10030000 { + compatible = "samsung,exynos4412-clock"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + interrupt-parent = <&mct_map>; + interrupts = <0>, <1>, <2>, <3>, <4>; + clocks = <&clock 3>, <&clock 344>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &gic 0 57 0>, + <1 &combiner 12 5>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 1 12 0>; + }; + }; + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 47 0>; + }; + + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <0 46 0>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_2: pinctrl@03860000 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x03860000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 0>; + }; + + pinctrl_3: pinctrl@106E0000 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x106E0000 0x1000>; + interrupts = <0 72 0>; + }; + + g2d@10800000 { + compatible = "samsung,exynos4212-g2d"; + reg = <0x10800000 0x1000>; + interrupts = <0 89 0>; + clocks = <&clock 177>, <&clock 277>; + clock-names = "sclk_fimg2d", "fimg2d"; + status = "disabled"; + }; + + mshc_0: mmc@12550000 { + compatible = "samsung,exynos4412-dw-mshc"; + reg = <0x12550000 0x1000>; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <0x80>; + clocks = <&clock 301>, <&clock 149>; + clock-names = "biu", "ciu"; + status = "disabled"; + }; +}; diff --git a/arch/arm/dts/exynos5.dtsi b/arch/arm/dts/exynos5.dtsi index a2b533a136..e53906892c 100644 --- a/arch/arm/dts/exynos5.dtsi +++ b/arch/arm/dts/exynos5.dtsi @@ -5,11 +5,38 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "samsung,exynos5"; + combiner: interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + samsung,combiner-nr = <32>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + sromc@12250000 { compatible = "samsung,exynos-sromc"; reg = <0x12250000 0x20>; @@ -17,6 +44,33 @@ #size-cells = <0>; }; + combiner: interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + samsung,combiner-nr = <32>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + i2c@12c60000 { #address-cells = <1>; #size-cells = <0>; @@ -190,6 +244,7 @@ compatible = "samsung,exynos4210-uart"; reg = <0x12C30000 0x100>; interrupts = <0 54 0>; + u-boot,dm-pre-reloc; id = <3>; }; diff --git a/arch/arm/dts/exynos5250-pinctrl-uboot.dtsi b/arch/arm/dts/exynos5250-pinctrl-uboot.dtsi new file mode 100644 index 0000000000..7edb0ca290 --- /dev/null +++ b/arch/arm/dts/exynos5250-pinctrl-uboot.dtsi @@ -0,0 +1,40 @@ +/* + * U-Boot additions to enable a generic Exynos GPIO driver + * + * Copyright (c) 2014 Google, Inc + */ + +/{ + pinctrl_0: pinctrl@11400000 { + #address-cells = <1>; + #size-cells = <0>; + gpc4: gpc4 { + reg = <0x2e0>; + }; + gpx0: gpx0 { + reg = <0xc00>; + }; + }; + + pinctrl_1: pinctrl@13400000 { + #address-cells = <1>; + #size-cells = <0>; + }; + + pinctrl_2: pinctrl@10d10000 { + #address-cells = <1>; + #size-cells = <0>; + gpv2: gpv2 { + reg = <0x060>; + }; + gpv4: gpv4 { + reg = <0xc0>; + }; + }; + + pinctrl_3: pinctrl@03860000 { + #address-cells = <1>; + #size-cells = <0>; + }; + +}; diff --git a/arch/arm/dts/exynos5250-pinctrl.dtsi b/arch/arm/dts/exynos5250-pinctrl.dtsi new file mode 100644 index 0000000000..67755a1e08 --- /dev/null +++ b/arch/arm/dts/exynos5250-pinctrl.dtsi @@ -0,0 +1,331 @@ +/* + * Samsung's Exynos5250 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpc4: gpc4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <23 0>, <24 0>, <25 0>, <25 1>, + <26 0>, <26 1>, <27 0>, <27 1>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <28 0>, <28 1>, <29 0>, <29 1>, + <30 0>, <30 1>, <31 0>, <31 1>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pinctrl@13400000 { + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + pinctrl@10d10000 { + gpv0: gpv0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv1: gpv1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv2: gpv2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv3: gpv3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv4: gpv4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + pinctrl@03860000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; +}; diff --git a/arch/arm/dts/exynos5250-smdk5250.dts b/arch/arm/dts/exynos5250-smdk5250.dts index 9020382d97..885040920c 100644 --- a/arch/arm/dts/exynos5250-smdk5250.dts +++ b/arch/arm/dts/exynos5250-smdk5250.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" +#include "exynos5250.dtsi" / { model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts index ab4f2f8581..6fd9275c4e 100644 --- a/arch/arm/dts/exynos5250-snow.dts +++ b/arch/arm/dts/exynos5250-snow.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" +#include "exynos5250.dtsi" / { model = "Google Snow"; @@ -53,6 +53,14 @@ }; }; + spi@12d30000 { + spi-max-frequency = <50000000>; + firmware_storage_spi: flash@0 { + compatible = "spi-flash"; + reg = <0>; + }; + }; + spi@131b0000 { spi-max-frequency = <1000000>; spi-deactivate-delay = <100>; diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi index 0c644e7cac..ccbafe9b07 100644 --- a/arch/arm/dts/exynos5250.dtsi +++ b/arch/arm/dts/exynos5250.dtsi @@ -5,9 +5,48 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/include/ "exynos5.dtsi" +#include "exynos5.dtsi" +#include "exynos5250-pinctrl.dtsi" +#include "exynos5250-pinctrl-uboot.dtsi" / { + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + }; + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 46 0>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_1: pinctrl@13400000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x13400000 0x1000>; + interrupts = <0 45 0>; + }; + + pinctrl_2: pinctrl@10d10000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x10d10000 0x1000>; + interrupts = <0 50 0>; + }; + + pinctrl_3: pinctrl@03860000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x03860000 0x1000>; + interrupts = <0 47 0>; + }; + i2c@12ca0000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/dts/exynos5420-peach-pit.dts b/arch/arm/dts/exynos5420-peach-pit.dts index 995e62b337..fde863de3c 100644 --- a/arch/arm/dts/exynos5420-peach-pit.dts +++ b/arch/arm/dts/exynos5420-peach-pit.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "exynos54xx.dtsi" +#include "exynos54xx.dtsi" / { model = "Samsung/Google Peach Pit board based on Exynos5420"; @@ -140,6 +140,7 @@ spi@12d30000 { /* spi1 */ spi-max-frequency = <50000000>; firmware_storage_spi: flash@0 { + compatible = "spi-flash"; reg = <0>; /* diff --git a/arch/arm/dts/exynos5420-smdk5420.dts b/arch/arm/dts/exynos5420-smdk5420.dts index 1bc6256283..6855027389 100644 --- a/arch/arm/dts/exynos5420-smdk5420.dts +++ b/arch/arm/dts/exynos5420-smdk5420.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "exynos54xx.dtsi" +#include "exynos54xx.dtsi" / { model = "SAMSUNG SMDK5420 board based on EXYNOS5420"; diff --git a/arch/arm/dts/exynos54xx-pinctrl-uboot.dtsi b/arch/arm/dts/exynos54xx-pinctrl-uboot.dtsi new file mode 100644 index 0000000000..5a86211d4a --- /dev/null +++ b/arch/arm/dts/exynos54xx-pinctrl-uboot.dtsi @@ -0,0 +1,40 @@ +/* + * U-Boot additions to enable a generic Exynos GPIO driver + * + * Copyright (c) 2014 Google, Inc + */ + +/{ + /* + * Replicate the ordering of arch/arm/include/asm/arch-exynos/gpio.h + * TODO(sjg@chromium.org): This ordering ceases to matter once GPIO + * numbers are not needed in U-Boot for exynos. + */ + pinctrl@14010000 { + #address-cells = <1>; + #size-cells = <0>; + }; + pinctrl@13400000 { + #address-cells = <1>; + #size-cells = <0>; + gpy7 { + }; + + gpx0 { + reg = <0xc00>; + }; + }; + pinctrl@13410000 { + #address-cells = <1>; + #size-cells = <0>; + }; + pinctrl@14000000 { + #address-cells = <1>; + #size-cells = <0>; + }; + pinctrl@03860000 { + #address-cells = <1>; + #size-cells = <0>; + }; + +}; diff --git a/arch/arm/dts/exynos54xx-pinctrl.dtsi b/arch/arm/dts/exynos54xx-pinctrl.dtsi new file mode 100644 index 0000000000..775d956a5f --- /dev/null +++ b/arch/arm/dts/exynos54xx-pinctrl.dtsi @@ -0,0 +1,305 @@ +/* + * Samsung's Exynos5420 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos5420 SoC pin-mux and pin-config options are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "exynos54xx-pinctrl-uboot.dtsi" + +/ { + pinctrl@13400000 { + gpy7: gpy7 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <23 0>, <24 0>, <25 0>, <25 1>, + <26 0>, <26 1>, <27 0>, <27 1>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <28 0>, <28 1>, <29 0>, <29 1>, + <30 0>, <30 1>, <31 0>, <31 1>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + pinctrl@13410000 { + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc4: gpc4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + }; + + pinctrl@14000000 { + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj4: gpj4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + pinctrl@14010000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb4: gpb4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + pinctrl@03860000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; +}; diff --git a/arch/arm/dts/exynos54xx.dtsi b/arch/arm/dts/exynos54xx.dtsi index c21d798a23..916cf3a5b6 100644 --- a/arch/arm/dts/exynos54xx.dtsi +++ b/arch/arm/dts/exynos54xx.dtsi @@ -5,7 +5,8 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/include/ "exynos5.dtsi" +#include "exynos5.dtsi" +#include "exynos54xx-pinctrl.dtsi" / { config { @@ -24,6 +25,11 @@ i2c8 = "/i2c@12e00000"; i2c9 = "/i2c@12e10000"; i2c10 = "/i2c@12e20000"; + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + pinctrl4 = &pinctrl_4; spi0 = "/spi@12d20000"; spi1 = "/spi@12d30000"; spi2 = "/spi@12d40000"; @@ -123,6 +129,42 @@ reg = <0x14680000 0x100>; }; + pinctrl_0: pinctrl@13400000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x13400000 0x1000>; + interrupts = <0 45 0>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_1: pinctrl@13410000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x13410000 0x1000>; + interrupts = <0 78 0>; + }; + + pinctrl_2: pinctrl@14000000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x14000000 0x1000>; + interrupts = <0 46 0>; + }; + + pinctrl_3: pinctrl@14010000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x14010000 0x1000>; + interrupts = <0 50 0>; + }; + + pinctrl_4: pinctrl@03860000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x03860000 0x1000>; + interrupts = <0 47 0>; + }; + fimd@14400000 { /* sysmmu is not used in U-Boot */ samsung,disable-sysmmu; diff --git a/arch/arm/dts/s5pc100-pinctrl.dtsi b/arch/arm/dts/s5pc100-pinctrl.dtsi new file mode 100644 index 0000000000..bd9f97c97b --- /dev/null +++ b/arch/arm/dts/s5pc100-pinctrl.dtsi @@ -0,0 +1,180 @@ +/* + * U-Boot additions to enable a generic Exynos GPIO driver + * + * Copyright (c) 2014 Google, Inc + */ + +/ { + pinctrl@e0300000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + }; + + gpc: gpc { + gpio-controller; + #gpio-cells = <2>; + }; + + gpd: gpd { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpi: gpi { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj2: gpj2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj3: gpj3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj4: gpj4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpl1: gpl1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpl2: gpl2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpl3: gpl3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpl4: gpl4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph2: gph2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph3: gph3 { + gpio-controller; + #gpio-cells = <2>; + }; + + }; +}; diff --git a/arch/arm/dts/s5pc110-pinctrl.dtsi b/arch/arm/dts/s5pc110-pinctrl.dtsi new file mode 100644 index 0000000000..d21b6ab756 --- /dev/null +++ b/arch/arm/dts/s5pc110-pinctrl.dtsi @@ -0,0 +1,273 @@ +/* + * U-Boot additions to enable a generic Exynos GPIO driver + * + * Copyright (c) 2014 Google, Inc + */ + +/ { + pinctrl@e0200000 { + #address-cells = <1>; + #size-cells = <0>; + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpi: gpi { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj2: gpj2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj3: gpj3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj4: gpj4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp01: gpmp01 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp02: gpmp02 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp03: gpmp03 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp04: gpmp04 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp05: gpmp05 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp06: gpmp06 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp07: gpmp07 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp10: gpmp10 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp11: gpmp11 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp12: gpmp12 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp13: gpmp13 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp14: gpmp14 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp15: gpmp15 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp16: gpmp16 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp17: gpmp17 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp18: gpmp18 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp20: gpmp20 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp21: gpmp21 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp22: gpmp22 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp23: gpmp23 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp24: gpmp24 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp25: gpmp25 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp26: gpmp26 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp27: gpmp27 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp28: gpmp28 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph0: gph0 { + reg = <0xc00>; + gpio-controller; + #gpio-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph2: gph2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph3: gph3 { + gpio-controller; + #gpio-cells = <2>; + }; + + }; +}; diff --git a/arch/arm/dts/s5pc1xx-goni.dts b/arch/arm/dts/s5pc1xx-goni.dts index 2e671bbf7e..7bbfe591cd 100644 --- a/arch/arm/dts/s5pc1xx-goni.dts +++ b/arch/arm/dts/s5pc1xx-goni.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "skeleton.dtsi" +#include "s5pc110-pinctrl.dtsi" / { model = "Samsung Goni based on S5PC110"; @@ -17,6 +18,12 @@ aliases { serial2 = "/serial@e2900800"; console = "/serial@e2900800"; + pinctrl0 = &pinctrl0; + }; + + pinctrl0: pinctrl@e0200000 { + compatible = "samsung,s5pc110-pinctrl"; + reg = <0xe0200000 0x1000>; }; serial@e2900800 { diff --git a/arch/arm/dts/s5pc1xx-smdkc100.dts b/arch/arm/dts/s5pc1xx-smdkc100.dts index 42754ce811..95f15ed48d 100644 --- a/arch/arm/dts/s5pc1xx-smdkc100.dts +++ b/arch/arm/dts/s5pc1xx-smdkc100.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "skeleton.dtsi" +#include "s5pc100-pinctrl.dtsi" / { model = "Samsung SMDKC100 based on S5PC100"; @@ -17,6 +18,12 @@ aliases { serial0 = "/serial@ec000000"; console = "/serial@ec000000"; + pinctrl0 = &pinctrl0; + }; + + pinctrl0: pinctrl@e0300000 { + compatible = "samsung,s5pc100-pinctrl"; + reg = <0xe0200000 0x1000>; }; serial@ec000000 { diff --git a/arch/arm/dts/tegra20-trimslice.dts b/arch/arm/dts/tegra20-trimslice.dts index cee5cfe0d2..74e8a16280 100644 --- a/arch/arm/dts/tegra20-trimslice.dts +++ b/arch/arm/dts/tegra20-trimslice.dts @@ -15,6 +15,7 @@ usb1 = "/usb@c5000000"; sdhci0 = "/sdhci@c8000600"; sdhci1 = "/sdhci@c8000000"; + spi0 = "/spi@7000c380"; }; memory { diff --git a/arch/arm/dts/tegra30-apalis.dts b/arch/arm/dts/tegra30-apalis.dts new file mode 100644 index 0000000000..5bad3e7769 --- /dev/null +++ b/arch/arm/dts/tegra30-apalis.dts @@ -0,0 +1,304 @@ +/dts-v1/; + +#include "tegra30.dtsi" + +/ { + model = "Toradex Apalis T30"; + compatible = "toradex,apalis_t30", "nvidia,tegra30"; + + chosen { + stdout-path = &uarta; + }; + + aliases { + i2c0 = "/i2c@7000d000"; + i2c1 = "/i2c@7000c000"; + i2c2 = "/i2c@7000c500"; + i2c3 = "/i2c@7000c700"; + sdhci0 = "/sdhci@78000600"; + sdhci1 = "/sdhci@78000400"; + sdhci2 = "/sdhci@78000000"; + usb0 = "/usb@7d000000"; + usb1 = "/usb@7d004000"; + usb2 = "/usb@7d008000"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + pcie-controller@00003000 { + status = "okay"; + avdd-pexa-supply = <&vdd2_reg>; + vdd-pexa-supply = <&vdd2_reg>; + avdd-pexb-supply = <&vdd2_reg>; + vdd-pexb-supply = <&vdd2_reg>; + avdd-pex-pll-supply = <&vdd2_reg>; + avdd-plle-supply = <&ldo6_reg>; + vddio-pex-ctl-supply = <&sys_3v3_reg>; + hvdd-pex-supply = <&sys_3v3_reg>; + + pci@1,0 { + nvidia,num-lanes = <4>; + }; + + pci@2,0 { + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + status = "okay"; + nvidia,num-lanes = <1>; + }; + }; + + /* + * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* GEN2_I2C: unused */ + + /* + * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on + * carrier board) + */ + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */ + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&sys_3v3_reg>; + vcc2-supply = <&sys_3v3_reg>; + vcc3-supply = <&vio_reg>; + vcc4-supply = <&sys_3v3_reg>; + vcc5-supply = <&sys_3v3_reg>; + vcc6-supply = <&vio_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; + vccio-supply = <&sys_3v3_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + /* SW1: +V1.35_VDDIO_DDR */ + vdd1_reg: vdd1 { + regulator-name = "vddio_ddr_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + /* SW2: +V1.05 */ + vdd2_reg: vdd2 { + regulator-name = + "vdd_pexa,vdd_pexb,vdd_sata"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + /* SW CTRL: +V1.0_VDD_CPU */ + vddctrl_reg: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + }; + + /* SWIO: +V1.8 */ + vio_reg: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + /* LDO1: unused */ + + /* + * EN_+V3.3 switching via FET: + * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN + * see also v3_3 fixed supply + */ + ldo2_reg: ldo2 { + regulator-name = "en_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* +V1.2_CSI */ + ldo3_reg: ldo3 { + regulator-name = + "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + /* +V1.2_VDD_RTC */ + ldo4_reg: ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* + * +V2.8_AVDD_VDAC: + * only required for analog RGB + */ + ldo5_reg: ldo5 { + regulator-name = "avdd_vdac"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + /* + * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V + * but LDO6 can't set voltage in 50mV + * granularity + */ + ldo6_reg: ldo6 { + regulator-name = "avdd_plle"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + /* +V1.2_AVDD_PLL */ + ldo7_reg: ldo7 { + regulator-name = "avdd_pll"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* +V1.0_VDD_DDR_HS */ + ldo8_reg: ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + }; + + /* SPI1: Apalis SPI1 */ + spi@7000d400 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + /* SPI4: CAN2 */ + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + /* SPI5: Apalis SPI2 */ + spi@7000dc00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + /* SPI6: CAN1 */ + spi@7000de00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + sdhci@78000000 { + status = "okay"; + bus-width = <4>; + cd-gpios = <&gpio 229 1>; /* PCC5, SD1_CD# */ + }; + + sdhci@78000400 { + status = "okay"; + bus-width = <8>; + cd-gpios = <&gpio 171 1>; /* PV3, MMC1_CD# */ + }; + + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */ + usb@7d000000 { + status = "okay"; + dr_mode = "peripheral"; + nvidia,vbus-gpio = <&gpio 157 0>; /* PT5, USBO1_EN */ + }; + + /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ + usb@7d004000 { + status = "okay"; + nvidia,vbus-gpio = <&gpio 233 0>; /* PDD1, USBH_EN */ + phy_type = "utmi"; + }; + + /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */ + usb@7d008000 { + status = "okay"; + nvidia,vbus-gpio = <&gpio 233 0>; /* PDD1, USBH_EN */ + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + sys_3v3_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/dts/tegra30-beaver.dts b/arch/arm/dts/tegra30-beaver.dts index ad140def95..9acd84d802 100644 --- a/arch/arm/dts/tegra30-beaver.dts +++ b/arch/arm/dts/tegra30-beaver.dts @@ -18,6 +18,7 @@ i2c4 = "/i2c@7000c700"; sdhci0 = "/sdhci@78000600"; sdhci1 = "/sdhci@78000000"; + spi0 = "/spi@7000da00"; usb0 = "/usb@7d000000"; usb1 = "/usb@7d008000"; }; diff --git a/arch/arm/dts/tegra30-cardhu.dts b/arch/arm/dts/tegra30-cardhu.dts index b4fbe71aa5..1b8ed737e0 100644 --- a/arch/arm/dts/tegra30-cardhu.dts +++ b/arch/arm/dts/tegra30-cardhu.dts @@ -18,6 +18,7 @@ i2c4 = "/i2c@7000c700"; sdhci0 = "/sdhci@78000600"; sdhci1 = "/sdhci@78000000"; + spi0 = "/spi@7000da00"; usb0 = "/usb@7d008000"; }; diff --git a/arch/arm/dts/tegra30-colibri.dts b/arch/arm/dts/tegra30-colibri.dts index 43d03ca4fa..572520a00e 100644 --- a/arch/arm/dts/tegra30-colibri.dts +++ b/arch/arm/dts/tegra30-colibri.dts @@ -6,12 +6,17 @@ model = "Toradex Colibri T30"; compatible = "toradex,colibri_t30", "nvidia,tegra30"; + chosen { + stdout-path = &uarta; + }; + aliases { i2c0 = "/i2c@7000d000"; i2c1 = "/i2c@7000c000"; i2c2 = "/i2c@7000c700"; sdhci0 = "/sdhci@78000600"; sdhci1 = "/sdhci@78000200"; + spi0 = "/spi@7000d400"; usb0 = "/usb@7d000000"; usb1 = "/usb@7d004000"; /* on module only, for ASIX */ usb2 = "/usb@7d008000"; |