diff options
Diffstat (limited to 'arch/arm/dts')
92 files changed, 6719 insertions, 1332 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 20a4c37d48..62fbf32a62 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -143,17 +143,25 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zc770-xm012.dtb \ zynq-zc770-xm013.dtb \ zynq-zed.dtb \ - zynq-zturn-myir.dtb \ + zynq-zturn.dtb \ zynq-zybo.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += \ - zynqmp-ep108.dtb \ zynqmp-mini-emmc.dtb \ zynqmp-mini-nand.dtb \ + zynqmp-zcu100-revC.dtb \ zynqmp-zcu102-revA.dtb \ zynqmp-zcu102-revB.dtb \ zynqmp-zcu102-rev1.0.dtb \ + zynqmp-zcu104-revA.dtb \ + zynqmp-zcu104-revC.dtb \ + zynqmp-zcu106-revA.dtb \ + zynqmp-zcu111-revA.dtb \ + zynqmp-zc1232-revA.dtb \ + zynqmp-zc1254-revA.dtb \ + zynqmp-zc1275-revA.dtb \ zynqmp-zc1751-xm015-dc1.dtb \ zynqmp-zc1751-xm016-dc2.dtb \ + zynqmp-zc1751-xm017-dc3.dtb \ zynqmp-zc1751-xm018-dc4.dtb \ zynqmp-zc1751-xm019-dc5.dtb dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-bone.dtb \ @@ -167,7 +175,8 @@ dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-bone.dtb \ am335x-pdu001.dtb dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb \ am43x-epos-evm.dtb \ - am437x-idk-evm.dtb + am437x-idk-evm.dtb \ + am4372-generic.dtb dtb-$(CONFIG_TI816X) += dm8168-evm.dtb dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb @@ -225,7 +234,8 @@ dtb-$(CONFIG_STM32F4) += stm32f429-disco.dtb \ stm32f469-disco.dtb dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \ - stm32f769-disco.dtb + stm32f769-disco.dtb \ + stm32746g-eval.dtb dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \ stm32h743i-eval.dtb @@ -304,6 +314,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-m5.dtb \ sun7i-a20-mk808c.dtb \ sun7i-a20-olimex-som-evb.dtb \ + sun7i-a20-olimex-som204-evb.dtb \ + sun7i-a20-olimex-som204-evb-emmc.dtb \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-lime2-emmc.dtb \ @@ -478,12 +490,18 @@ dtb-$(CONFIG_TARGET_SAMA5D3XEK) += \ dtb-$(CONFIG_TARGET_SAMA5D3_XPLAINED) += \ at91-sama5d3_xplained.dtb +dtb-$(CONFIG_TARGET_MA5D4EK) += \ + at91-sama5d4_ma5d4evk.dts.dtb + dtb-$(CONFIG_TARGET_SAMA5D4EK) += \ at91-sama5d4ek.dtb dtb-$(CONFIG_TARGET_SAMA5D4_XPLAINED) += \ at91-sama5d4_xplained.dtb +dtb-$(CONFIG_TARGET_VINCO) += \ + at91-vinco.dtb + dtb-$(CONFIG_ARCH_BCM283X) += \ bcm2835-rpi-a-plus.dtb \ bcm2835-rpi-a.dtb \ @@ -497,6 +515,9 @@ dtb-$(CONFIG_ARCH_ASPEED) += ast2500-evb.dtb dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb +dtb-$(CONFIG_TARGET_STM32MP1) += \ + stm32mp157c-ed1.dtb + targets += $(dtb-y) # Add any required device tree compiler flags here diff --git a/arch/arm/dts/am4372-generic-u-boot.dtsi b/arch/arm/dts/am4372-generic-u-boot.dtsi new file mode 100644 index 0000000000..03a8a8d17b --- /dev/null +++ b/arch/arm/dts/am4372-generic-u-boot.dtsi @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/{ + ocp { + u-boot,dm-pre-reloc; + }; +}; + +&i2c0 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/am4372-generic.dts b/arch/arm/dts/am4372-generic.dts new file mode 100644 index 0000000000..0c48439018 --- /dev/null +++ b/arch/arm/dts/am4372-generic.dts @@ -0,0 +1,24 @@ +/* + * Device Tree Source for Generic AM4372 EVM + * + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "am4372.dtsi" + +/ { + compatible = "ti,am4372", "ti,am43"; + model = "Texas Instruments AM4372 Generic"; + + chosen { + stdout-path = &uart0; + }; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/dts/am437x-idk-evm-u-boot.dtsi b/arch/arm/dts/am437x-idk-evm-u-boot.dtsi new file mode 100644 index 0000000000..2f68d7ae9c --- /dev/null +++ b/arch/arm/dts/am437x-idk-evm-u-boot.dtsi @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/{ + ocp { + u-boot,dm-spl; + }; +}; + +&uart0 { + u-boot,dm-spl; +}; + +&i2c0 { + u-boot,dm-spl; +}; + +&mmc1 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/am437x-sk-evm-u-boot.dtsi b/arch/arm/dts/am437x-sk-evm-u-boot.dtsi new file mode 100644 index 0000000000..2f68d7ae9c --- /dev/null +++ b/arch/arm/dts/am437x-sk-evm-u-boot.dtsi @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/{ + ocp { + u-boot,dm-spl; + }; +}; + +&uart0 { + u-boot,dm-spl; +}; + +&i2c0 { + u-boot,dm-spl; +}; + +&mmc1 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/armada-3720-db.dts b/arch/arm/dts/armada-3720-db.dts index 5f06252e4e..770c08aa7d 100644 --- a/arch/arm/dts/armada-3720-db.dts +++ b/arch/arm/dts/armada-3720-db.dts @@ -82,7 +82,7 @@ ð0 { pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; + pinctrl-0 = <&rgmii_pins>, <&smi_pins>; status = "okay"; phy-mode = "rgmii"; }; @@ -100,6 +100,8 @@ &sdhci0 { bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; status = "okay"; }; @@ -109,6 +111,8 @@ mmc-ddr-1_8v; mmc-hs400-1_8v; marvell,pad-type = "fixed-1-8v"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; status = "okay"; #address-cells = <1>; @@ -150,3 +154,11 @@ &usb3 { status = "okay"; }; + +/* CON17 */ +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts index aa6587af66..7bfccb0435 100644 --- a/arch/arm/dts/armada-3720-espressobin.dts +++ b/arch/arm/dts/armada-3720-espressobin.dts @@ -89,6 +89,8 @@ ð0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&smi_pins>; phy-mode = "rgmii"; phy_addr = <0x1>; fixed-link { @@ -98,6 +100,8 @@ }; &i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; @@ -108,6 +112,8 @@ &spi0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; spi-flash@0 { #address-cells = <1>; @@ -121,6 +127,8 @@ /* Exported on the micro USB connector CON32 through an FTDI */ &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; status = "okay"; }; @@ -133,3 +141,10 @@ &usb3 { status = "okay"; }; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/dts/armada-37xx.dtsi b/arch/arm/dts/armada-37xx.dtsi index 690234234b..54007428ed 100644 --- a/arch/arm/dts/armada-37xx.dtsi +++ b/arch/arm/dts/armada-37xx.dtsi @@ -46,6 +46,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/comphy/comphy_data.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Marvell Armada 37xx SoC"; @@ -154,6 +155,11 @@ groups = "uart2"; function = "uart"; }; + + mmc_pins: mmc-pins { + groups = "emmc_nb"; + function = "emmc"; + }; }; pinctrl_sb: pinctrl-sb@18800 { @@ -162,7 +168,7 @@ reg = <0x18800 0x100>, <0x18C00 0x20>; gpiosb: gpiosb { #gpio-cells = <2>; - gpio-ranges = <&pinctrl_sb 0 0 29>; + gpio-ranges = <&pinctrl_sb 0 0 30>; gpio-controller; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, @@ -177,6 +183,20 @@ function = "mii"; }; + smi_pins: smi-pins { + groups = "smi"; + function = "smi"; + }; + + sdio_pins: sdio-pins { + groups = "sdio_sb"; + function = "sdio"; + }; + + pcie_pins: pcie-pins { + groups = "pcie1"; + function = "gpio"; + }; }; usb3: usb@58000 { @@ -266,20 +286,6 @@ status = "disabled"; }; - pinctl0: pinctl@13830 { /* north bridge */ - compatible = "marvell,armada-3700-pinctl"; - bank-name = "armada-3700-nb"; - reg = <0x13830 0x4>; - pin-count = <36>; - }; - - pinctl1: pinctl@18830 { /* south bridge */ - compatible = "marvell,armada-3700-pinctl"; - bank-name = "armada-3700-sb"; - reg = <0x18830 0x4>; - pin-count = <30>; - }; - comphy: comphy@18300 { compatible = "marvell,mvebu-comphy", "marvell,comphy-armada-3700"; reg = <0x18300 0x28>, @@ -288,5 +294,21 @@ max-lanes = <2>; }; }; + + pcie0: pcie@d0070000 { + compatible = "marvell,armada-37xx-pcie"; + reg = <0 0xd0070000 0 0x20000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + status = "disabled"; + + bus-range = <0 0xff>; + ranges = <0x82000000 0 0xe8000000 + 0 0xe8000000 0 0x1000000 /* Port 0 MEM */ + 0x81000000 0 0xe9000000 + 0 0xe9000000 0 0x10000>; /* Port 0 IO*/ + }; }; }; diff --git a/arch/arm/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/dts/at91-sama5d4_ma5d4.dtsi new file mode 100644 index 0000000000..d3e79fbf19 --- /dev/null +++ b/arch/arm/dts/at91-sama5d4_ma5d4.dtsi @@ -0,0 +1,142 @@ +/* + * Copyright (C) 2015 Marek Vasut <marex@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "sama5d4.dtsi" + +/ { + model = "Aries/DENX MA5D4"; + compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5"; + + memory { + reg = <0x20000000 0x10000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + + clk20m: clk20m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + clock-output-names = "clk20m"; + }; + }; + + ahb { + apb { + mmc0: mmc@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>; + vmmc-supply = <&vcc_mmc0_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <8>; + broken-cd; + }; + }; + + spi0: spi@f8010000 { + cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; + status = "okay"; + + m25p80@0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; + + i2c0: i2c@f8014000 { + status = "okay"; + }; + + spi1: spi@fc018000 { + cs-gpios = <&pioB 22 0>, <&pioB 23 0>, <0>, <0>; + status = "okay"; + + can0: can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk20m>; + interrupt-parent = <&pioE>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; + spi-max-frequency = <10000000>; + }; + + can1: can@1 { + compatible = "microchip,mcp2515"; + reg = <1>; + clocks = <&clk20m>; + interrupt-parent = <&pioE>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + spi-max-frequency = <10000000>; + }; + }; + + tcb2: timer@fc024000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + + adc0: adc@fc034000 { + pinctrl-names = "default"; + pinctrl-0 = < + /* external trigger conflicts with USBA_VBUS */ + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + >; + atmel,adc-vref = <3300>; + status = "okay"; + }; + + watchdog@fc068640 { + status = "okay"; + }; + }; + }; + + vcc_3v3_reg: fixedregulator_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC 3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_mmc0_reg: fixedregulator_mmc0 { + compatible = "regulator-fixed"; + gpio = <&pioE 15 GPIO_ACTIVE_HIGH>; + regulator-name = "RST_n MCI0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_reg>; + regulator-boot-on; + }; +}; diff --git a/arch/arm/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/dts/at91-sama5d4_ma5d4evk.dts new file mode 100644 index 0000000000..f65a67b751 --- /dev/null +++ b/arch/arm/dts/at91-sama5d4_ma5d4evk.dts @@ -0,0 +1,149 @@ +/* + * Copyright (C) 2015 Marek Vasut <marex@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "at91-sama5d4_ma5d4.dtsi" + +/ { + model = "Aries/DENX MA5D4EVK"; + compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5"; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + ahb { + apb { + hlcdc: hlcdc@f0000000 { + status = "okay"; + + hlcdc-display-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + + port@0 { + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + + }; + + macb0: ethernet@f8020000 { + phy-mode = "rmii"; + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + usart0: serial@f802c000 { + status = "okay"; + }; + + usart1: serial@f8030000 { + status = "okay"; + }; + + mmc1: mmc@fc000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + vmmc-supply = <&vcc_mmc1_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 5 0>; + }; + }; + + adc0: adc@fc034000 { + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + }; + + + pinctrl@fc06a000 { + board { + pinctrl_mmc1_cd: mmc1_cd { + atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + }; + }; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + status = "okay"; + + user1 { + label = "user1"; + gpios = <&pioD 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + user2 { + label = "user2"; + gpios = <&pioD 29 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + user3 { + label = "user3"; + gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + panel: panel { + /* Actually Ampire 800480R2 */ + compatible = "foxlink,fl500wvr00-a0t", "simple-panel"; + backlight = <&backlight>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&hlcdc_panel_output>; + }; + }; + }; + + vcc_mmc1_reg: fixedregulator_mmc1 { + compatible = "regulator-fixed"; + gpio = <&pioE 17 GPIO_ACTIVE_LOW>; + regulator-name = "VDD MCI1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_reg>; + }; +}; diff --git a/arch/arm/dts/at91-vinco.dts b/arch/arm/dts/at91-vinco.dts new file mode 100644 index 0000000000..ff6d2e3205 --- /dev/null +++ b/arch/arm/dts/at91-vinco.dts @@ -0,0 +1,246 @@ +/* + * Device Tree file for VInCo platform + * + * Copyright (C) 2014 Atmel, + * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> + * 2015 Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "sama5d4.dtsi" + +/ { + model = "L+G VInCo platform"; + compatible = "l+g,vinco", "atmel,sama5d4", "atmel,sama5"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + + adc0: adc@fc034000 { + status = "okay"; /* Enable ADC IIO support */ + }; + + mmc0: mmc@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 + &pinctrl_mmc0_dat1_3 + &pinctrl_mmc0_dat4_7>; + vqmmc-supply = <&vcc_3v3_reg>; + vmmc-supply = <&vcc_3v3_reg>; + no-1-8-v; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <8>; + non-removable; + broken-cd; + status = "okay"; + }; + }; + + spi0: spi@f8010000 { + cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; + status = "okay"; + m25p80@0 { + compatible = "n25q32b", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; + + i2c0: i2c@f8014000 { + status = "okay"; + }; + + i2c1: i2c@f8018000 { + status = "okay"; + /* kerkey security module */ + }; + + macb0: ethernet@f8020000 { + phy-mode = "rmii"; + status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>; + interrupt-parent = <&pioB>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + }; + + }; + + i2c2: i2c@f8024000 { + status = "okay"; + + rtc1: rtc@64 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + }; + + usart2: serial@fc008000 { + /* MBUS */ + status = "okay"; + }; + + usart3: serial@fc00c000 { + /* debug */ + status = "okay"; + }; + + usart4: serial@fc010000 { + /* LMN */ + pinctrl-0 = <&pinctrl_usart4 &pinctrl_usart4_rts>; + linux,rs485-enabled-at-boot-time; + status = "okay"; + }; + + tcb2: timer@fc024000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + + macb1: ethernet@fc028000 { + phy-mode = "rmii"; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioB>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>; + }; + }; + + watchdog@fc068640 { + status = "okay"; + }; + + pinctrl@fc06a000 { + board { + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + }; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + status = "okay"; + + led_err { + label = "err"; + gpios = <&pioA 7 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_rssi { + label = "rssi"; + gpios = <&pioA 9 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_tls { + label = "tls"; + gpios = <&pioA 24 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_lmc { + label = "lmc"; + gpios = <&pioA 25 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_wmt { + label = "wmt"; + gpios = <&pioA 29 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_pwr { + label = "pwr"; + gpios = <&pioA 26 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + }; + + vcc_3v3_reg: fixedregulator_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC 3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; diff --git a/arch/arm/dts/da850-lcdk-u-boot.dtsi b/arch/arm/dts/da850-lcdk-u-boot.dtsi new file mode 100644 index 0000000000..c67c3ddbf7 --- /dev/null +++ b/arch/arm/dts/da850-lcdk-u-boot.dtsi @@ -0,0 +1,13 @@ +/* + * da850-lcdk U-Boot Additions + * + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/ { + aliases { + i2c0 = &i2c0; + }; +}; diff --git a/arch/arm/dts/da850-lcdk.dts b/arch/arm/dts/da850-lcdk.dts new file mode 100644 index 0000000000..a1f4d6d5a5 --- /dev/null +++ b/arch/arm/dts/da850-lcdk.dts @@ -0,0 +1,339 @@ +/* + * Copyright (c) 2016 BayLibre, Inc. + * + * Licensed under GPLv2. + */ +/dts-v1/; +#include "da850.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "DA850/AM1808/OMAP-L138 LCDK"; + compatible = "ti,da850-lcdk", "ti,da850"; + + aliases { + serial2 = &serial2; + ethernet0 = ð0; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0xc0000000 0x08000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dsp_memory_region: dsp-memory@c3000000 { + compatible = "shared-dma-pool"; + reg = <0xc3000000 0x1000000>; + reusable; + status = "okay"; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "DA850/OMAP-L138 LCDK"; + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out"; + simple-audio-card,routing = + "LINE1L", "Line In", + "LINE1R", "Line In", + "Line Out", "LLOUT", + "Line Out", "RLOUT"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&link0_codec>; + simple-audio-card,frame-master = <&link0_codec>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp0>; + system-clock-frequency = <24576000>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + system-clock-frequency = <24576000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + user1 { + label = "GPIO Key USER1"; + linux,code = <BTN_0>; + gpios = <&gpio 36 GPIO_ACTIVE_LOW>; + }; + + user2 { + label = "GPIO Key USER2"; + linux,code = <BTN_1>; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + }; + }; + + vga-bridge { + compatible = "ti,ths8135"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&lcdc_out_vga>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + ddc-i2c-bus = <&i2c0>; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; +}; + +&pmx_core { + status = "okay"; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,bits = < + /* AHCLKX AFSX ACLKX */ + 0x00 0x00101010 0x00f0f0f0 + /* ARX13 ARX14 */ + 0x04 0x00000110 0x00000ff0 + >; + }; + + nand_pins: nand_pins { + pinctrl-single,bits = < + /* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[3] */ + 0x1c 0x10110010 0xf0ff00f0 + /* + * EMA_D[0], EMA_D[1], EMA_D[2], + * EMA_D[3], EMA_D[4], EMA_D[5], + * EMA_D[6], EMA_D[7] + */ + 0x24 0x11111111 0xffffffff + /* + * EMA_D[8], EMA_D[9], EMA_D[10], + * EMA_D[11], EMA_D[12], EMA_D[13], + * EMA_D[14], EMA_D[15] + */ + 0x20 0x11111111 0xffffffff + /* EMA_A[1], EMA_A[2] */ + 0x30 0x01100000 0x0ff00000 + >; + }; +}; + +&serial2 { + pinctrl-names = "default"; + pinctrl-0 = <&serial2_rxtx_pins>; + status = "okay"; +}; + +&wdt { + status = "okay"; +}; + +&rtc0 { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + bus_freq = <2200000>; + status = "okay"; +}; + +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&mii_pins>; + status = "okay"; +}; + +&mmc0 { + max-frequency = <50000000>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <100000>; + status = "okay"; + + tlv320aic3106: tlv320aic3106@18 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x18>; + status = "okay"; + }; +}; + +&mcasp0 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + status = "okay"; + + op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + 0 1 2 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +&usb_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&aemif { + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins>; + status = "okay"; + cs3 { + #address-cells = <2>; + #size-cells = <1>; + clock-ranges; + ranges; + + ti,cs-chipselect = <3>; + + nand@2000000,0 { + compatible = "ti,davinci-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x02000000 0x02000000 + 1 0x00000000 0x00008000>; + + ti,davinci-chipselect = <1>; + ti,davinci-mask-ale = <0>; + ti,davinci-mask-cle = <0>; + ti,davinci-mask-chipsel = <0>; + + ti,davinci-nand-buswidth = <16>; + ti,davinci-ecc-mode = "hw"; + ti,davinci-ecc-bits = <4>; + ti,davinci-nand-use-bbt; + + /* + * The OMAP-L132/L138 Bootloader doc SPRAB41E reads: + * "To boot from NAND Flash, the AIS should be written + * to NAND block 1 (NAND block 0 is not used by default)". + * The same doc mentions that for ROM "Silicon Revision 2.1", + * "Updated NAND boot mode to offer boot from block 0 or block 1". + * However the limitaion is left here by default for compatibility + * with older silicon and because it needs new boot pin settings + * not possible in stock LCDK. + */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot env"; + reg = <0 0x020000>; + }; + partition@20000 { + /* The LCDK defaults to booting from this partition */ + label = "u-boot"; + reg = <0x020000 0x080000>; + }; + partition@a0000 { + label = "free space"; + reg = <0x0a0000 0>; + }; + }; + }; + }; +}; + +&prictrl { + status = "okay"; +}; + +&memctrl { + status = "okay"; +}; + +&lcdc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + port { + lcdc_out_vga: endpoint { + remote-endpoint = <&vga_bridge_in>; + }; + }; +}; + +&vpif { + pinctrl-names = "default"; + pinctrl-0 = <&vpif_capture_pins>; + status = "okay"; +}; + +&dsp { + memory-region = <&dsp_memory_region>; + status = "okay"; +}; diff --git a/arch/arm/dts/da850.dtsi b/arch/arm/dts/da850.dtsi index 02e2f8f258..c66cf78953 100644 --- a/arch/arm/dts/da850.dtsi +++ b/arch/arm/dts/da850.dtsi @@ -23,11 +23,18 @@ reg = <0xfffee000 0x2000>; }; }; - - aliases { - spi0 = &spi0; + dsp: dsp@11800000 { + compatible = "ti,da850-dsp"; + reg = <0x11800000 0x40000>, + <0x11e00000 0x8000>, + <0x11f00000 0x8000>, + <0x01c14044 0x4>, + <0x01c14174 0x8>; + reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig"; + interrupt-parent = <&intc>; + interrupts = <28>; + status = "disabled"; }; - soc@1c00000 { compatible = "simple-bus"; model = "da850"; diff --git a/arch/arm/dts/dra7-evm-u-boot.dtsi b/arch/arm/dts/dra7-evm-u-boot.dtsi index 62ef83047e..3e7da7c766 100644 --- a/arch/arm/dts/dra7-evm-u-boot.dtsi +++ b/arch/arm/dts/dra7-evm-u-boot.dtsi @@ -13,3 +13,23 @@ &pcf_hdmi{ u-boot,i2c-offset-len = <0>; }; + +&mmc2_pins_default { + u-boot,dm-spl; +}; + +&mmc2_pins_hs { + u-boot,dm-spl; +}; + +&mmc2_pins_ddr_rev20 { + u-boot,dm-spl; +}; + +&mmc2_pins_hs200 { + u-boot,dm-spl; +}; + +&mmc2_iodelay_hs200_rev20_conf { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/dra71-evm-u-boot.dtsi b/arch/arm/dts/dra71-evm-u-boot.dtsi index 8ae64c0a3c..e2ab0bbfab 100644 --- a/arch/arm/dts/dra71-evm-u-boot.dtsi +++ b/arch/arm/dts/dra71-evm-u-boot.dtsi @@ -21,3 +21,27 @@ &cpsw_emac1 { phy-handle = <&dp83867_1>; }; + +&mmc2_pins_default { + u-boot,dm-spl; +}; + +&mmc2_pins_hs { + u-boot,dm-spl; +}; + +&mmc2_pins_ddr_rev20 { + u-boot,dm-spl; +}; + +&mmc2_iodelay_ddr_conf { + u-boot,dm-spl; +}; + +&mmc2_pins_hs200 { + u-boot,dm-spl; +}; + +&mmc2_iodelay_hs200_rev20_conf { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/dra72-evm-revc-u-boot.dtsi b/arch/arm/dts/dra72-evm-revc-u-boot.dtsi index 8ae64c0a3c..e2ab0bbfab 100644 --- a/arch/arm/dts/dra72-evm-revc-u-boot.dtsi +++ b/arch/arm/dts/dra72-evm-revc-u-boot.dtsi @@ -21,3 +21,27 @@ &cpsw_emac1 { phy-handle = <&dp83867_1>; }; + +&mmc2_pins_default { + u-boot,dm-spl; +}; + +&mmc2_pins_hs { + u-boot,dm-spl; +}; + +&mmc2_pins_ddr_rev20 { + u-boot,dm-spl; +}; + +&mmc2_iodelay_ddr_conf { + u-boot,dm-spl; +}; + +&mmc2_pins_hs200 { + u-boot,dm-spl; +}; + +&mmc2_iodelay_hs200_rev20_conf { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/dra76-evm-u-boot.dtsi b/arch/arm/dts/dra76-evm-u-boot.dtsi index b007f78d46..a5a0694d50 100644 --- a/arch/arm/dts/dra76-evm-u-boot.dtsi +++ b/arch/arm/dts/dra76-evm-u-boot.dtsi @@ -13,3 +13,15 @@ &cpsw_emac1 { phy-handle = <&dp83867_1>; }; + +&mmc2_pins_default { + u-boot,dm-spl; +}; + +&mmc2_pins_hs200 { + u-boot,dm-spl; +}; + +&mmc2_iodelay_hs200_conf { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/dra76-evm.dts b/arch/arm/dts/dra76-evm.dts index b024a65c6e..a1f289f345 100644 --- a/arch/arm/dts/dra76-evm.dts +++ b/arch/arm/dts/dra76-evm.dts @@ -9,6 +9,7 @@ #include "dra76x.dtsi" #include "dra7-evm-common.dtsi" +#include "dra76x-mmc-iodelay.dtsi" #include <dt-bindings/net/ti-dp83867.h> / { @@ -100,46 +101,6 @@ }; }; -&dra7_pmx_core { - mmc1_pins_default: mmc1_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ - DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ - DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ - >; - }; - - mmc1_pins_sdr12: pinmux_mmc1_sdr12_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ - DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ - >; - }; - - mmc2_pins_default: mmc2_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ - DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ - DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ - DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ - DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ - DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ - DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ - DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ - DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ - DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ - >; - }; -}; - &i2c1 { status = "okay"; clock-frequency = <400000>; @@ -345,23 +306,27 @@ &mmc1 { status = "okay"; vmmc-supply = <&vio_3v3_sd>; - vmmc_aux-supply = <&ldo4_reg>; + vqmmc-supply = <&ldo4_reg>; bus-width = <4>; /* * SDCD signal is not being used here - using the fact that GPIO mode * is always hardwired. */ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; + pinctrl-names = "default", "hs"; pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; }; &mmc2 { status = "okay"; vmmc-supply = <&vio_1v8>; bus-width = <8>; - pinctrl-names = "default"; + pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v"; pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_default>; + pinctrl-2 = <&mmc2_pins_default>; + pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_conf>; }; /* No RTC on this device */ diff --git a/arch/arm/dts/dra76x-mmc-iodelay.dtsi b/arch/arm/dts/dra76x-mmc-iodelay.dtsi new file mode 100644 index 0000000000..baba7b00ec --- /dev/null +++ b/arch/arm/dts/dra76x-mmc-iodelay.dtsi @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Texas Instruments +// MMC IOdelay values for TI's DRA76x and AM576x SoCs. +// Author: Sekhar Nori <nsekhar@ti.com> + +/* + * Rules for modifying this file: + * a) Update of this file should typically correspond to a datamanual revision. + * Datamanual revision that was used should be updated in comment below. + * If there is no update to datamanual, do not update the values. If you + * need to use values different from that recommended by the datamanual + * for your design, then you should consider adding values to the device- + * -tree file for your board directly. + * b) We keep the mode names as close to the datamanual as possible. So + * if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v, + * we follow that in code too. + * c) If the values change between multiple revisions of silicon, we add + * a revision tag to both the new and old entry. Use 'rev11' for PG 1.1, + * 'rev20' for PG 2.0 and so on. + * d) The node name and node label should be the exact same string. This is + * to curb naming creativity and achieve consistency. + * + * Datamanual Revisions: + * + * DRA76x Silicon Revision 1.0: SPRS993A, Revised July 2017 + * + */ + +&dra7_pmx_core { + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_hs: mmc1_pins_hs { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr50: mmc1_pins_sdr50 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_ddr50: mmc1_pins_ddr50 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_hs200: mmc2_pins_hs200 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc3_pins_default: mmc3_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + >; + }; + + mmc4_pins_hs: mmc4_pins_hs { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */ + DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */ + DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */ + DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */ + DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */ + DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */ + >; + }; +}; + +&dra7_iodelay_core { + + /* Corresponds to MMC1_DDR_MANUAL1 in datamanual */ + mmc1_iodelay_ddr_conf: mmc1_iodelay_ddr_conf { + pinctrl-pin-array = < + 0x618 A_DELAY_PS(489) G_DELAY_PS(0) /* CFG_MMC1_CLK_IN */ + 0x624 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_IN */ + 0x630 A_DELAY_PS(374) G_DELAY_PS(0) /* CFG_MMC1_DAT0_IN */ + 0x63c A_DELAY_PS(31) G_DELAY_PS(0) /* CFG_MMC1_DAT1_IN */ + 0x648 A_DELAY_PS(56) G_DELAY_PS(0) /* CFG_MMC1_DAT2_IN */ + 0x654 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */ + 0x620 A_DELAY_PS(1355) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */ + 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x638 A_DELAY_PS(0) G_DELAY_PS(4) /* CFG_MMC1_DAT0_OUT */ + 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */ + mmc1_iodelay_sdr104_conf: mmc1_iodelay_sdr104_conf { + pinctrl-pin-array = < + 0x620 A_DELAY_PS(892) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */ + 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x638 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */ + 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */ + mmc2_iodelay_hs200_conf: mmc2_iodelay_hs200_conf { + pinctrl-pin-array = < + 0x190 A_DELAY_PS(384) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ + 0x194 A_DELAY_PS(0) G_DELAY_PS(174) /* CFG_GPMC_A19_OUT */ + 0x1a8 A_DELAY_PS(410) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ + 0x1ac A_DELAY_PS(85) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b4 A_DELAY_PS(468) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ + 0x1b8 A_DELAY_PS(139) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ + 0x1c0 A_DELAY_PS(676) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ + 0x1c4 A_DELAY_PS(69) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ + 0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154) /* CFG_GPMC_A23_OUT */ + 0x1d8 A_DELAY_PS(640) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ + 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e4 A_DELAY_PS(356) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ + 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1f0 A_DELAY_PS(579) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ + 0x1f4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x1fc A_DELAY_PS(435) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ + 0x200 A_DELAY_PS(36) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x364 A_DELAY_PS(759) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ + 0x368 A_DELAY_PS(72) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ + >; + }; + + /* Corresponds to MMC3_MANUAL1 in datamanual */ + mmc3_iodelay_manual1_conf: mmc3_iodelay_manual1_conf { + pinctrl-pin-array = < + 0x678 A_DELAY_PS(0) G_DELAY_PS(386) /* CFG_MMC3_CLK_IN */ + 0x680 A_DELAY_PS(605) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */ + 0x684 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */ + 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */ + 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */ + 0x690 A_DELAY_PS(171) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */ + 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */ + 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */ + 0x69c A_DELAY_PS(221) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */ + 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */ + 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */ + 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */ + 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */ + 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */ + 0x6b4 A_DELAY_PS(474) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */ + 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */ + 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC3_MANUAL2 in datamanual */ + mmc3_iodelay_sdr50_conf: mmc3_iodelay_sdr50_conf { + pinctrl-pin-array = < + 0x678 A_DELAY_PS(852) G_DELAY_PS(0) /* CFG_MMC3_CLK_IN */ + 0x680 A_DELAY_PS(94) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */ + 0x684 A_DELAY_PS(122) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */ + 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */ + 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */ + 0x690 A_DELAY_PS(91) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */ + 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */ + 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */ + 0x69c A_DELAY_PS(57) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */ + 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */ + 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */ + 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */ + 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */ + 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */ + 0x6b4 A_DELAY_PS(375) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */ + 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */ + 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC4_MANUAL1 in datamanual */ + mmc4_iodelay_manual1_conf: mmc4_iodelay_manual1_conf { + pinctrl-pin-array = < + 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */ + 0x848 A_DELAY_PS(1147) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */ + 0x84c A_DELAY_PS(1834) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */ + 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */ + 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */ + 0x870 A_DELAY_PS(2165) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */ + 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */ + 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */ + 0x87c A_DELAY_PS(1929) G_DELAY_PS(64) /* CFG_UART2_RTSN_IN */ + 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */ + 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */ + 0x888 A_DELAY_PS(1935) G_DELAY_PS(128) /* CFG_UART2_RXD_IN */ + 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */ + 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */ + 0x894 A_DELAY_PS(2172) G_DELAY_PS(44) /* CFG_UART2_TXD_IN */ + 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */ + 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */ + >; + }; + + /* Corresponds to MMC4_DS_MANUAL1 in datamanual */ + mmc4_iodelay_default_conf: mmc4_iodelay_default_conf { + pinctrl-pin-array = < + 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */ + 0x848 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */ + 0x84c A_DELAY_PS(307) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */ + 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */ + 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */ + 0x870 A_DELAY_PS(785) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */ + 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */ + 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */ + 0x87c A_DELAY_PS(613) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */ + 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */ + 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */ + 0x888 A_DELAY_PS(683) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */ + 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */ + 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */ + 0x894 A_DELAY_PS(835) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */ + 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */ + 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */ + >; + }; +}; diff --git a/arch/arm/dts/fsl-ls1088a-qds.dts b/arch/arm/dts/fsl-ls1088a-qds.dts index 225c7c53c7..02000fcba8 100644 --- a/arch/arm/dts/fsl-ls1088a-qds.dts +++ b/arch/arm/dts/fsl-ls1088a-qds.dts @@ -19,6 +19,43 @@ }; }; +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NOR, NAND Flashes and FPGA on board */ + ranges = <0 0 0x5 0x80000000 0x08000000 + 2 0 0x5 0x30000000 0x00010000 + 3 0 0x5 0x20000000 0x00010000>; + status = "okay"; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + compatible = "fsl,ifc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1 0x0 0x10000>; + }; + + fpga: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus", "fsl,ls1088aqds-fpga", + "fsl,fpga-qixis"; + reg = <0x2 0x0 0x0000100>; + bank-width = <1>; + device-width = <1>; + ranges = <0 2 0 0x100>; + }; +}; + &dspi { bus-num = <0>; status = "okay"; diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi index f8f8654e15..b4a42cf5d0 100644 --- a/arch/arm/dts/fsl-ls1088a.dtsi +++ b/arch/arm/dts/fsl-ls1088a.dtsi @@ -75,6 +75,11 @@ reg-names = "QuadSPI", "QuadSPI-memory"; num-cs = <4>; }; + ifc: ifc@1530000 { + compatible = "fsl,ifc", "simple-bus"; + reg = <0x0 0x2240000 0x0 0x20000>; + interrupts = <0 21 0x4>; /* Level high type */ + }; usb0: usb3@3100000 { compatible = "fsl,layerscape-dwc3"; diff --git a/arch/arm/dts/r8a7790-stout-u-boot.dts b/arch/arm/dts/r8a7790-stout-u-boot.dts index 12092fcf5d..d2b7d371aa 100644 --- a/arch/arm/dts/r8a7790-stout-u-boot.dts +++ b/arch/arm/dts/r8a7790-stout-u-boot.dts @@ -8,3 +8,7 @@ #include "r8a7790-stout.dts" #include "r8a7790-u-boot.dtsi" + +&scifa0 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/rk3288-vyasa-u-boot.dtsi b/arch/arm/dts/rk3288-vyasa-u-boot.dtsi new file mode 100644 index 0000000000..6017ca2ddc --- /dev/null +++ b/arch/arm/dts/rk3288-vyasa-u-boot.dtsi @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +&dmc { + rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa + 0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7 + 0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0 + 0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0 + 0x5 0x0>; + rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200 + 0xa60 0x40 0x10 0x0>; + /* Add a dummy value to cause of-platdata think this is bytes */ + rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>; +}; + +&sdmmc { + u-boot,dm-pre-reloc; +}; + +&emmc { + u-boot,dm-pre-reloc; +}; + +&uart2 { + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts index 93a9c5ee09..850aa25818 100644 --- a/arch/arm/dts/rk3288-vyasa.dts +++ b/arch/arm/dts/rk3288-vyasa.dts @@ -52,48 +52,146 @@ }; memory { + reg = <0x0 0x0 0x0 0x80000000>; device_type = "memory"; - reg = <0 0x80000000>; }; - vcc_sd: sdmmc-regulator { + dc12_vbat: dc12-vbat { compatible = "regulator-fixed"; - gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_pwr>; - regulator-name = "vcc_sd"; + regulator-name = "dc12_vbat"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vboot_3v3: vboot-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vboot_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - vin-supply = <&vcc_io>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc12_vbat>; }; vcc_sys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc12_vbat>; + }; + + vboot_5v: vboot-5v { + compatible = "regulator-fixed"; + regulator-name = "vboot_sv"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; regulator-boot-on; + vin-supply = <&dc12_vbat>; + }; + + v3g_3v3: v3g-3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3g_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc12_vbat>; + }; + + vsus_5v: vsus-5v { + compatible = "regulator-fixed"; + regulator-name = "vsus_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vusb1_5v: vusb1-5v { + compatible = "regulator-fixed"; + regulator-name = "vusb1_5v"; + enable-active-high; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* OTG_VBUS_DRV */ + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsus_5v>; + }; + + vusb2_5v: vusb2-5v { + compatible = "regulator-fixed"; + regulator-name = "vusb2_5v"; + enable-active-high; + gpio = <&gpio8 RK_PB1 GPIO_ACTIVE_HIGH>; /* USB2_PWR_EN */ + pinctrl-names = "default"; + pinctrl-0 = <&usb2_pwr_en>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsus_5v>; }; -}; -&dmc { - rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa - 0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7 - 0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0 - 0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0 - 0x5 0x0>; - rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200 - 0xa60 0x40 0x10 0x0>; - /* Add a dummy value to cause of-platdata think this is bytes */ - rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>; + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; }; &cpu0 { cpu0-supply = <&vdd_cpu>; }; +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + vmmc-supply = <&vcc_io>; + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; status = "okay"; @@ -103,12 +201,12 @@ reg = <0x1b>; interrupt-parent = <&gpio0>; interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; pinctrl-names = "default"; pinctrl-0 = <&pmic_int &global_pwroff>; - wakeup-source; rockchip,system-power-controller; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; + wakeup-source; vcc1-supply = <&vcc_sys>; vcc2-supply = <&vcc_sys>; @@ -123,23 +221,23 @@ vcc12-supply = <&vcc_io>; regulators { - vdd_cpu: vdd_log: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; + vdd_cpu: DCDC_REG1 { + regulator-name = "vdd_arm"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1350000>; - regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vdd_gpu"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; - regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1000000>; @@ -147,20 +245,20 @@ }; vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; regulator-always-on; regulator-boot-on; - regulator-name = "vcc_ddr"; regulator-state-mem { regulator-on-in-suspend; }; }; vcc_io: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc_io"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc_io"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; @@ -168,11 +266,11 @@ }; vcca_tp: LDO_REG1 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc_tp"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc_tp"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; @@ -180,22 +278,22 @@ }; vcc_codec: LDO_REG2 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc_codec"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc_codec"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_10: LDO_REG3 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vdd_10"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; - regulator-name = "vdd_10"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1000000>; @@ -203,11 +301,11 @@ }; vcc_gps: LDO_REG4 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc_gps"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc_gps"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; @@ -215,11 +313,11 @@ }; vccio_sd: LDO_REG5 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vccio_sd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; @@ -227,11 +325,11 @@ }; vcc10_lcd: LDO_REG6 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc10_lcd"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; - regulator-name = "vcc10_lcd"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; @@ -239,11 +337,11 @@ }; vcc_18: LDO_REG7 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc_18"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; @@ -251,34 +349,34 @@ }; vcc18_lcd: LDO_REG8 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc18_lcd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_lcd"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; - vcc33_sd: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; + vcc_sd: SWITCH_REG1 { + regulator-name = "vcc_sd"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc33_sd"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; }; }; vcc_lan: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc_lan"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc_lan"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; }; @@ -287,10 +385,11 @@ }; }; -&sdmmc { - u-boot,dm-pre-reloc; +&i2c2 { status = "okay"; +}; +&sdmmc { bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; @@ -300,10 +399,44 @@ pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; vmmc-supply = <&vcc_sd>; vqmmc-supply = <&vccio_sd>; + status = "okay"; }; &uart2 { - u-boot,dm-pre-reloc; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host1 { + pinctrl-names = "default"; + pinctrl-0 = <&phy_pwr_en>; + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { status = "okay"; }; @@ -312,16 +445,44 @@ }; &pinctrl { - u-boot,dm-pre-reloc; + pcfg_output_high: pcfg-output-high { + output-high; + }; + + gmac { + phy_int: phy-int { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_pmeb: phy-pmeb { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rst: phy-rst { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + pmic { pmic_int: pmic-int { rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; - sdmmc { - sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + usb_host { + phy_pwr_en: phy-pwr-en { + rockchip,pins = <RK_GPIO2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>; + }; + + usb2_pwr_en: usb2-pwr-en { + rockchip,pins = <8 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb_otg { + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <RK_GPIO0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; }; diff --git a/arch/arm/dts/stm32429i-eval.dts b/arch/arm/dts/stm32429i-eval.dts index 362ea4245e..4bf53a717d 100644 --- a/arch/arm/dts/stm32429i-eval.dts +++ b/arch/arm/dts/stm32429i-eval.dts @@ -230,6 +230,7 @@ pinctrl-0 = <&sdio_pins>; pinctrl-1 = <&sdio_pins_od>; bus-width = <4>; + max-frequency = <14000000>; }; &timers1 { diff --git a/arch/arm/dts/stm32746g-eval.dts b/arch/arm/dts/stm32746g-eval.dts new file mode 100644 index 0000000000..4f6d38accc --- /dev/null +++ b/arch/arm/dts/stm32746g-eval.dts @@ -0,0 +1,240 @@ +/* + * Copyright 2018 - Christophe Priouzeau <christophe.priouzeau@st.com> + * + * Based on: + * stm32f746-disco.dts from U-boot 2018.01 + * Copyright 2016 - Lee Jones <lee.jones@linaro.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32f746.dtsi" +#include <dt-bindings/memory/stm32-sdram.h> + +/ { + model = "STMicroelectronics STM32F746G-EVAL board"; + compatible = "st,stm32f746g-eval", "st,stm32f746"; + + chosen { + bootargs = "root=/dev/mmcblk0p1 rw rootwait"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0xC0000000 0x2000000>; + }; + + aliases { + serial0 = &usart1; + spi0 = &qspi; + mmc0 = &sdio; + /* Aliases for gpios so as to use sequence */ + gpio0 = &gpioa; + gpio1 = &gpiob; + gpio2 = &gpioc; + gpio3 = &gpiod; + gpio4 = &gpioe; + gpio5 = &gpiof; + gpio6 = &gpiog; + gpio7 = &gpioh; + gpio8 = &gpioi; + gpio9 = &gpioj; + gpio10 = &gpiok; + }; + + led1 { + compatible = "st,led1"; + led-gpio = <&gpiof 10 0>; + }; + + button1 { + compatible = "st,button1"; + button-gpio = <&gpioc 13 0>; + }; +}; + +&clk_hse { + clock-frequency = <25000000>; +}; + +&pinctrl { + usart1_pins_a: usart1@0 { + pins1 { + pinmux = <STM32F746_PA9_FUNC_USART1_TX>; + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32F746_PA10_FUNC_USART1_RX>; + bias-disable; + }; + }; + + ethernet_mii: mii@0 { + pins { + pinmux = <STM32F746_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>, + <STM32F746_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>, + <STM32F746_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>, + <STM32F746_PA2_FUNC_ETH_MDIO>, + <STM32F746_PC1_FUNC_ETH_MDC>, + <STM32F746_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>, + <STM32F746_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>, + <STM32F746_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>, + <STM32F746_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>; + slew-rate = <2>; + }; + }; + + fmc_pins: fmc@0 { + pins { + pinmux = <STM32F746_PI10_FUNC_FMC_D31>, /* FMC_D31 */ + <STM32F746_PI9_FUNC_FMC_D30>, /* FMC_D30*/ + <STM32F746_PI7_FUNC_FMC_D29>, /* FMC_D29 */ + <STM32F746_PI6_FUNC_FMC_D28>, /* FMC_D28 */ + <STM32F746_PI3_FUNC_FMC_D27>, /* FMC_D27 */ + <STM32F746_PI2_FUNC_FMC_D26>, /* FMC_D26 */ + <STM32F746_PI1_FUNC_FMC_D25>, /* FMC_D25 */ + <STM32F746_PI0_FUNC_FMC_D24>, /* FMC_D24 */ + <STM32F746_PH15_FUNC_FMC_D23>, /* FMC_D23 */ + <STM32F746_PH14_FUNC_FMC_D22>, /* FMC_D22 */ + <STM32F746_PH13_FUNC_FMC_D21>, /* FMC_D21 */ + <STM32F746_PH12_FUNC_FMC_D20>, /* FMC_D20 */ + <STM32F746_PH11_FUNC_FMC_D19>, /* FMC_D19 */ + <STM32F746_PH10_FUNC_FMC_D18>, /* FMC_D18 */ + <STM32F746_PH9_FUNC_FMC_D17>, /* FMC_D17 */ + <STM32F746_PH8_FUNC_FMC_D16>, /* FMC_D16 */ + + <STM32F746_PD10_FUNC_FMC_D15>, /* FMC_D15 */ + <STM32F746_PD9_FUNC_FMC_D14>, /* FMC_D14*/ + <STM32F746_PD8_FUNC_FMC_D13>, /* FMC_D13 */ + <STM32F746_PE15_FUNC_FMC_D12>,/* FMC_D12 */ + <STM32F746_PE14_FUNC_FMC_D11>,/* FMC_D11 */ + <STM32F746_PE13_FUNC_FMC_D10>,/* FMC_D10 */ + <STM32F746_PE12_FUNC_FMC_D9>, /* FMC_D9 */ + <STM32F746_PE11_FUNC_FMC_D8>, /* FMC_D8 */ + <STM32F746_PE10_FUNC_FMC_D7>, /* FMC_D7 */ + <STM32F746_PE9_FUNC_FMC_D6>, /* FMC_D6 */ + <STM32F746_PE8_FUNC_FMC_D5>, /* FMC_D5*/ + <STM32F746_PE7_FUNC_FMC_D4>, /* FMC_D4 */ + <STM32F746_PD1_FUNC_FMC_D3>, /* FMC_D3 */ + <STM32F746_PD0_FUNC_FMC_D2>, /* FMC_D2 */ + <STM32F746_PD15_FUNC_FMC_D1>, /* FMC_D1 */ + <STM32F746_PD14_FUNC_FMC_D0>, /* FMC_D0 */ + + <STM32F746_PI5_FUNC_FMC_NBL3>, /* FMC_NBL3 */ + <STM32F746_PI4_FUNC_FMC_NBL2>, /* FMC_NBL2 */ + <STM32F746_PE1_FUNC_FMC_NBL1>, /* FMC_NBL1 */ + <STM32F746_PE0_FUNC_FMC_NBL0>, /* FMC_NBL0 */ + + <STM32F746_PG5_FUNC_FMC_A15_FMC_BA1>, /* FMC_A15 FMC_BA1 */ + <STM32F746_PG4_FUNC_FMC_A14_FMC_BA0>, /* FMC_A14 FMC_BA0*/ + + <STM32F746_PG1_FUNC_FMC_A11>, /* FMC_A11 */ + <STM32F746_PG0_FUNC_FMC_A10>, /* FMC_A10 */ + <STM32F746_PF15_FUNC_FMC_A9>, /* FMC_A9 */ + <STM32F746_PF14_FUNC_FMC_A8>, /* FMC_A8 */ + <STM32F746_PF13_FUNC_FMC_A7>, /* FMC_A7 */ + <STM32F746_PF12_FUNC_FMC_A6>, /* FMC_A6 */ + <STM32F746_PF5_FUNC_FMC_A5>, /* FUNC_FMC_A5 */ + <STM32F746_PF4_FUNC_FMC_A4>, /* FMC_A4 */ + <STM32F746_PF3_FUNC_FMC_A3>, /* FMC_A3 */ + <STM32F746_PF2_FUNC_FMC_A2>, /* FMC_A2 */ + <STM32F746_PF1_FUNC_FMC_A1>, /* FMC_A1 */ + <STM32F746_PF0_FUNC_FMC_A0>, /* FMC_A0 */ + + <STM32F746_PH3_FUNC_FMC_SDNE0>,/* FMC_SDNE0 */ + <STM32F746_PH5_FUNC_FMC_SDNWE>, /* FMC_SDNWE */ + <STM32F746_PF11_FUNC_FMC_SDNRAS>, /* FMC_SDNRAS */ + <STM32F746_PG15_FUNC_FMC_SDNCAS>, /* FMC_SDNCAS */ + <STM32F746_PH2_FUNC_FMC_SDCKE0>, /* FMC_SDCKE0 */ + <STM32F746_PG8_FUNC_FMC_SDCLK>; /* FMC_SDCLK */ + slew-rate = <2>; + }; + }; +}; + +&usart1 { + pinctrl-0 = <&usart1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mac { + status = "okay"; + pinctrl-0 = <ðernet_mii>; + phy-mode = "rmii"; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&fmc { + pinctrl-0 = <&fmc_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* + * Memory configuration from sdram datasheet IS42S32800G-6BLI + */ + bank1: bank@0 { + st,sdram-control = /bits/ 8 <NO_COL_9 NO_ROW_12 MWIDTH_32 BANKS_4 + CAS_2 SDCLK_3 RD_BURST_EN RD_PIPE_DL_0>; + st,sdram-timing = /bits/ 8 <TMRD_1 TXSR_1 TRAS_1 TRC_6 TRP_2 + TWR_1 TRCD_1>; + st,sdram-refcount = <1539>; + }; +}; + +&sdio { + status = "okay"; + pinctrl-names = "default", "opendrain"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_pins_od>; + bus-width = <4>; + max-frequency = <25000000>; +}; diff --git a/arch/arm/dts/stm32f7-u-boot.dtsi b/arch/arm/dts/stm32f7-u-boot.dtsi index 9a9e4e5f37..4a677192a2 100644 --- a/arch/arm/dts/stm32f7-u-boot.dtsi +++ b/arch/arm/dts/stm32f7-u-boot.dtsi @@ -1,3 +1,11 @@ +/{ + soc { + timer5: timer@40000c00 { + u-boot,dm-pre-reloc; + }; + }; +}; + &pinctrl { usart1_pins_a: usart1@0 { u-boot,dm-pre-reloc; diff --git a/arch/arm/dts/stm32f746-disco.dts b/arch/arm/dts/stm32f746-disco.dts index 9e8d2a045c..e47f762e54 100644 --- a/arch/arm/dts/stm32f746-disco.dts +++ b/arch/arm/dts/stm32f746-disco.dts @@ -89,6 +89,37 @@ compatible = "st,button1"; button-gpio = <&gpioi 11 0>; }; + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpiok 3 0>; + status = "okay"; + }; + + panel-rgb@0 { + compatible = "simple-panel"; + backlight = <&backlight>; + enable-gpios = <&gpioi 12 0>; + status = "okay"; + + display-timings { + timing@0 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <2>; + hback-porch = <2>; + hsync-len = <41>; + vfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <1>; + }; + }; + }; }; &clk_hse { @@ -183,6 +214,40 @@ slew-rate = <2>; }; }; + + ltdc_pins: ltdc@0 { + pins { + pinmux = <STM32F746_PE4_FUNC_LCD_B0>, + <STM32F746_PG12_FUNC_LCD_B4>, + <STM32F746_PI9_FUNC_LCD_VSYNC>, + <STM32F746_PI10_FUNC_LCD_HSYNC>, + <STM32F746_PI14_FUNC_LCD_CLK>, + <STM32F746_PI15_FUNC_LCD_R0>, + <STM32F746_PJ0_FUNC_LCD_R1>, + <STM32F746_PJ1_FUNC_LCD_R2>, + <STM32F746_PJ2_FUNC_LCD_R3>, + <STM32F746_PJ3_FUNC_LCD_R4>, + <STM32F746_PJ4_FUNC_LCD_R5>, + <STM32F746_PJ5_FUNC_LCD_R6>, + <STM32F746_PJ6_FUNC_LCD_R7>, + <STM32F746_PJ7_FUNC_LCD_G0>, + <STM32F746_PJ8_FUNC_LCD_G1>, + <STM32F746_PJ9_FUNC_LCD_G2>, + <STM32F746_PJ10_FUNC_LCD_G3>, + <STM32F746_PJ11_FUNC_LCD_G4>, + <STM32F746_PJ13_FUNC_LCD_B1>, + <STM32F746_PJ14_FUNC_LCD_B2>, + <STM32F746_PJ15_FUNC_LCD_B3>, + <STM32F746_PK0_FUNC_LCD_G5>, + <STM32F746_PK1_FUNC_LCD_G6>, + <STM32F746_PK2_FUNC_LCD_G7>, + <STM32F746_PK4_FUNC_LCD_B5>, + <STM32F746_PK5_FUNC_LCD_B6>, + <STM32F746_PK6_FUNC_LCD_B7>, + <STM32F746_PK7_FUNC_LCD_DE>; + slew-rate = <2>; + }; + }; }; &usart1 { @@ -250,3 +315,8 @@ bus-width = <4>; max-frequency = <25000000>; }; + +<dc { + status = "okay"; + pinctrl-0 = <<dc_pins>; +}; diff --git a/arch/arm/dts/stm32f746.dtsi b/arch/arm/dts/stm32f746.dtsi index 46d148eab2..8581df9a27 100644 --- a/arch/arm/dts/stm32f746.dtsi +++ b/arch/arm/dts/stm32f746.dtsi @@ -323,6 +323,22 @@ pinctrl-names = "default", "opendrain"; max-frequency = <48000000>; }; + + timer5: timer@40000c00 { + compatible = "st,stm32-timer"; + reg = <0x40000c00 0x400>; + interrupts = <50>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>; + }; + + ltdc: display-controller@40016800 { + compatible = "st,stm32-ltdc"; + reg = <0x40016800 0x200>; + resets = <&rcc STM32F7_APB2_RESET(LTDC)>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>; + u-boot,dm-pre-reloc; + status = "disabled"; + }; }; }; diff --git a/arch/arm/dts/stm32mp15-ddr.dtsi b/arch/arm/dts/stm32mp15-ddr.dtsi new file mode 100644 index 0000000000..ddfa0794d9 --- /dev/null +++ b/arch/arm/dts/stm32mp15-ddr.dtsi @@ -0,0 +1,155 @@ +/* + * Copyright : STMicroelectronics 2018 + * + * SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause + */ + +/ { + soc { + ddr: ddr@0x5A003000{ + u-boot,dm-pre-reloc; + + compatible = "st,stm32mp1-ddr"; + + reg = <0x5A003000 0x550 + 0x5A004000 0x234>; + + clocks = <&rcc_clk AXIDCG>, + <&rcc_clk DDRC1>, + <&rcc_clk DDRC2>, + <&rcc_clk DDRPHYC>, + <&rcc_clk DDRCAPB>, + <&rcc_clk DDRPHYCAPB>; + + clock-names = "axidcg", + "ddrc1", + "ddrc2", + "ddrphyc", + "ddrcapb", + "ddrphycapb"; + + st,mem-name = DDR_MEM_NAME; + st,mem-speed = <DDR_MEM_SPEED>; + st,mem-size = <DDR_MEM_SIZE>; + + st,ctl-reg = < + DDR_MSTR + DDR_MRCTRL0 + DDR_MRCTRL1 + DDR_DERATEEN + DDR_DERATEINT + DDR_PWRCTL + DDR_PWRTMG + DDR_HWLPCTL + DDR_RFSHCTL0 + DDR_RFSHCTL3 + DDR_CRCPARCTL0 + DDR_ZQCTL0 + DDR_DFITMG0 + DDR_DFITMG1 + DDR_DFILPCFG0 + DDR_DFIUPD0 + DDR_DFIUPD1 + DDR_DFIUPD2 + DDR_DFIPHYMSTR + DDR_ODTMAP + DDR_DBG0 + DDR_DBG1 + DDR_DBGCMD + DDR_POISONCFG + DDR_PCCFG + >; + + st,ctl-timing = < + DDR_RFSHTMG + DDR_DRAMTMG0 + DDR_DRAMTMG1 + DDR_DRAMTMG2 + DDR_DRAMTMG3 + DDR_DRAMTMG4 + DDR_DRAMTMG5 + DDR_DRAMTMG6 + DDR_DRAMTMG7 + DDR_DRAMTMG8 + DDR_DRAMTMG14 + DDR_ODTCFG + >; + + st,ctl-map = < + DDR_ADDRMAP1 + DDR_ADDRMAP2 + DDR_ADDRMAP3 + DDR_ADDRMAP4 + DDR_ADDRMAP5 + DDR_ADDRMAP6 + DDR_ADDRMAP9 + DDR_ADDRMAP10 + DDR_ADDRMAP11 + >; + + st,ctl-perf = < + DDR_SCHED + DDR_SCHED1 + DDR_PERFHPR1 + DDR_PERFLPR1 + DDR_PERFWR1 + DDR_PCFGR_0 + DDR_PCFGW_0 + DDR_PCFGQOS0_0 + DDR_PCFGQOS1_0 + DDR_PCFGWQOS0_0 + DDR_PCFGWQOS1_0 + DDR_PCFGR_1 + DDR_PCFGW_1 + DDR_PCFGQOS0_1 + DDR_PCFGQOS1_1 + DDR_PCFGWQOS0_1 + DDR_PCFGWQOS1_1 + >; + + st,phy-reg = < + DDR_PGCR + DDR_ACIOCR + DDR_DXCCR + DDR_DSGCR + DDR_DCR + DDR_ODTCR + DDR_ZQ0CR1 + DDR_DX0GCR + DDR_DX1GCR + DDR_DX2GCR + DDR_DX3GCR + >; + + st,phy-timing = < + DDR_PTR0 + DDR_PTR1 + DDR_PTR2 + DDR_DTPR0 + DDR_DTPR1 + DDR_DTPR2 + DDR_MR0 + DDR_MR1 + DDR_MR2 + DDR_MR3 + >; + + st,phy-cal = < + DDR_DX0DLLCR + DDR_DX0DQTR + DDR_DX0DQSTR + DDR_DX1DLLCR + DDR_DX1DQTR + DDR_DX1DQSTR + DDR_DX2DLLCR + DDR_DX2DQTR + DDR_DX2DQSTR + DDR_DX3DLLCR + DDR_DX3DQTR + DDR_DX3DQSTR + >; + + status = "okay"; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi new file mode 100644 index 0000000000..352e470fa9 --- /dev/null +++ b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi @@ -0,0 +1,122 @@ +/* + * Copyright (C) 2018, STMicroelectronics - All Rights Reserved + * + * SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause + */ + +/* STM32MP157C ED1 and ED2 BOARD configuration + * 2x DDR3L 4Gb each, 16-bit, 533MHz, Single Die Package in flyby topology. + * Reference used NT5CC256M16DP-DI from NANYA + * + * DDR type / Platform DDR3/3L + * freq 533MHz + * width 32 + * datasheet 0 = MT41J256M16-187 / DDR3-1066 bin G + * DDR density 8 + * timing mode optimized + * Scheduling/QoS options : type = 2 + * address mapping : RBC + */ + +#define DDR_MEM_NAME "DDR3-1066 bin G 2x4Gb 533MHz v1.36" +#define DDR_MEM_SPEED 533 +#define DDR_MEM_SIZE 0x40000000 + +#define DDR_MSTR 0x00040401 +#define DDR_MRCTRL0 0x00000010 +#define DDR_MRCTRL1 0x00000000 +#define DDR_DERATEEN 0x00000000 +#define DDR_DERATEINT 0x00800000 +#define DDR_PWRCTL 0x00000000 +#define DDR_PWRTMG 0x00400010 +#define DDR_HWLPCTL 0x00000000 +#define DDR_RFSHCTL0 0x00210000 +#define DDR_RFSHCTL3 0x00000000 +#define DDR_RFSHTMG 0x0081008B +#define DDR_CRCPARCTL0 0x00000000 +#define DDR_DRAMTMG0 0x121B2414 +#define DDR_DRAMTMG1 0x000A041C +#define DDR_DRAMTMG2 0x0608090F +#define DDR_DRAMTMG3 0x0050400C +#define DDR_DRAMTMG4 0x08040608 +#define DDR_DRAMTMG5 0x06060403 +#define DDR_DRAMTMG6 0x02020002 +#define DDR_DRAMTMG7 0x00000202 +#define DDR_DRAMTMG8 0x00001005 +#define DDR_DRAMTMG14 0x000000A0 +#define DDR_ZQCTL0 0xC2000040 +#define DDR_DFITMG0 0x02060105 +#define DDR_DFITMG1 0x00000202 +#define DDR_DFILPCFG0 0x07000000 +#define DDR_DFIUPD0 0xC0400003 +#define DDR_DFIUPD1 0x00000000 +#define DDR_DFIUPD2 0x00000000 +#define DDR_DFIPHYMSTR 0x00000000 +#define DDR_ADDRMAP1 0x00080808 +#define DDR_ADDRMAP2 0x00000000 +#define DDR_ADDRMAP3 0x00000000 +#define DDR_ADDRMAP4 0x00001F1F +#define DDR_ADDRMAP5 0x07070707 +#define DDR_ADDRMAP6 0x0F070707 +#define DDR_ADDRMAP9 0x00000000 +#define DDR_ADDRMAP10 0x00000000 +#define DDR_ADDRMAP11 0x00000000 +#define DDR_ODTCFG 0x06000600 +#define DDR_ODTMAP 0x00000001 +#define DDR_SCHED 0x00001201 +#define DDR_SCHED1 0x00000000 +#define DDR_PERFHPR1 0x01000001 +#define DDR_PERFLPR1 0x08000200 +#define DDR_PERFWR1 0x08000400 +#define DDR_DBG0 0x00000000 +#define DDR_DBG1 0x00000000 +#define DDR_DBGCMD 0x00000000 +#define DDR_POISONCFG 0x00000000 +#define DDR_PCCFG 0x00000010 +#define DDR_PCFGR_0 0x00010000 +#define DDR_PCFGW_0 0x00000000 +#define DDR_PCFGQOS0_0 0x02100B03 +#define DDR_PCFGQOS1_0 0x00800100 +#define DDR_PCFGWQOS0_0 0x01100B03 +#define DDR_PCFGWQOS1_0 0x01000200 +#define DDR_PCFGR_1 0x00010000 +#define DDR_PCFGW_1 0x00000000 +#define DDR_PCFGQOS0_1 0x02100B03 +#define DDR_PCFGQOS1_1 0x00800100 +#define DDR_PCFGWQOS0_1 0x01100B03 +#define DDR_PCFGWQOS1_1 0x01000200 +#define DDR_PGCR 0x01442E02 +#define DDR_PTR0 0x0022AA5B +#define DDR_PTR1 0x04841104 +#define DDR_PTR2 0x042DA068 +#define DDR_ACIOCR 0x10400812 +#define DDR_DXCCR 0x00000C40 +#define DDR_DSGCR 0xF200001F +#define DDR_DCR 0x0000000B +#define DDR_DTPR0 0x38D488D0 +#define DDR_DTPR1 0x098B00D8 +#define DDR_DTPR2 0x10023600 +#define DDR_MR0 0x00000840 +#define DDR_MR1 0x00000000 +#define DDR_MR2 0x00000208 +#define DDR_MR3 0x00000000 +#define DDR_ODTCR 0x00010000 +#define DDR_ZQ0CR1 0x0000005B +#define DDR_DX0GCR 0x0000CE81 +#define DDR_DX0DLLCR 0x40000000 +#define DDR_DX0DQTR 0xFFFFFFFF +#define DDR_DX0DQSTR 0x3DB02000 +#define DDR_DX1GCR 0x0000CE81 +#define DDR_DX1DLLCR 0x40000000 +#define DDR_DX1DQTR 0xFFFFFFFF +#define DDR_DX1DQSTR 0x3DB02000 +#define DDR_DX2GCR 0x0000CE81 +#define DDR_DX2DLLCR 0x40000000 +#define DDR_DX2DQTR 0xFFFFFFFF +#define DDR_DX2DQSTR 0x3DB02000 +#define DDR_DX3GCR 0x0000CE81 +#define DDR_DX3DLLCR 0x40000000 +#define DDR_DX3DQTR 0xFFFFFFFF +#define DDR_DX3DQSTR 0x3DB02000 + +#include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp157-u-boot.dtsi b/arch/arm/dts/stm32mp157-u-boot.dtsi new file mode 100644 index 0000000000..1eca8020f9 --- /dev/null +++ b/arch/arm/dts/stm32mp157-u-boot.dtsi @@ -0,0 +1,145 @@ +/* + * Copyright : STMicroelectronics 2018 + * + * SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause + */ + +/ { + aliases { + gpio0 = &gpioa; + gpio1 = &gpiob; + gpio2 = &gpioc; + gpio3 = &gpiod; + gpio4 = &gpioe; + gpio5 = &gpiof; + gpio6 = &gpiog; + gpio7 = &gpioh; + gpio8 = &gpioi; + gpio9 = &gpioj; + gpio10 = &gpiok; + gpio25 = &gpioz; + }; + + config { + u-boot,dm-pre-reloc; + }; + + clocks { + u-boot,dm-pre-reloc; + }; + + soc { + u-boot,dm-pre-reloc; + }; + + stgen: stgen@5C008000 { + compatible = "st,stm32-stgen"; + reg = <0x5C008000 0x1000>; + status = "okay"; + u-boot,dm-pre-reloc; + }; +}; + +&clk_hsi { + u-boot,dm-pre-reloc; +}; + +&clk_hse { + u-boot,dm-pre-reloc; +}; + +&clk_lse { + u-boot,dm-pre-reloc; +}; + +&clk_lsi { + u-boot,dm-pre-reloc; +}; + +&clk_csi { + u-boot,dm-pre-reloc; +}; + +&rcc { + u-boot,dm-pre-reloc; +}; + +&rcc_clk { + u-boot,dm-pre-reloc; +}; + +&rcc_rst { + u-boot,dm-pre-reloc; +}; + +&rcc_reboot { + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_z { + u-boot,dm-pre-reloc; +}; + +&gpioa { + compatible = "st,stm32-gpio"; + u-boot,dm-pre-reloc; +}; + +&gpiob { + compatible = "st,stm32-gpio"; + u-boot,dm-pre-reloc; +}; + +&gpioc { + compatible = "st,stm32-gpio"; + u-boot,dm-pre-reloc; +}; + +&gpiod { + compatible = "st,stm32-gpio"; + u-boot,dm-pre-reloc; +}; + +&gpioe { + compatible = "st,stm32-gpio"; + u-boot,dm-pre-reloc; +}; + +&gpiof { + compatible = "st,stm32-gpio"; + u-boot,dm-pre-reloc; +}; + +&gpiog { + compatible = "st,stm32-gpio"; + u-boot,dm-pre-reloc; +}; + +&gpioh { + compatible = "st,stm32-gpio"; + u-boot,dm-pre-reloc; +}; + +&gpioi { + compatible = "st,stm32-gpio"; + u-boot,dm-pre-reloc; +}; + +&gpioj { + compatible = "st,stm32-gpio"; + u-boot,dm-pre-reloc; +}; + +&gpiok { + compatible = "st,stm32-gpio"; + u-boot,dm-pre-reloc; +}; + +&gpioz { + compatible = "st,stm32-gpio"; + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/stm32mp157.dtsi b/arch/arm/dts/stm32mp157.dtsi new file mode 100644 index 0000000000..b84899a1ea --- /dev/null +++ b/arch/arm/dts/stm32mp157.dtsi @@ -0,0 +1,338 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/stm32mp1-clks.h> +#include <dt-bindings/reset-controller/stm32mp1-resets.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + aliases { + serial3 = &uart4; + }; + + intc: interrupt-controller@a0021000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xa0021000 0x1000>, + <0xa0022000 0x2000>; + }; + + clocks { + clk_hse: clk-hse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + clk_hsi: clk-hsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <64000000>; + }; + + clk_lse: clk-lse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + clk_lsi: clk-lsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32000>; + }; + + clk_csi: clk-csi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <4000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + + uart4: serial@40010000 { + compatible = "st,stm32h7-uart"; + reg = <0x40010000 0x400>; + clocks = <&rcc_clk UART4_K>; + status = "disabled"; + }; + + sdmmc3: sdmmc@48004000 { + compatible = "st,stm32-sdmmc2"; + reg = <0x48004000 0x400>, <0x48005000 0x400>; + reg-names = "sdmmc", "delay"; + interrupts = <GIC_SPI 137 IRQ_TYPE_NONE>; + clocks = <&rcc_clk SDMMC3_K>; + resets = <&rcc_rst SDMMC3_R>; + st,idma = <1>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; + }; + + rcc: rcc@50000000 { + compatible = "syscon", "simple-mfd"; + + reg = <0x50000000 0x1000>; + + rcc_clk: rcc-clk@50000000 { + #clock-cells = <1>; + compatible = "st,stm32mp1-rcc-clk"; + }; + + rcc_rst: rcc-reset@50000000 { + #reset-cells = <1>; + compatible = "st,stm32mp1-rcc-rst"; + }; + + rcc_reboot: rcc-reboot@50000000 { + compatible = "syscon-reboot"; + regmap = <&rcc>; + offset = <0x404>; + mask = <0x1>; + }; + }; + + pinctrl: pin-controller { + compatible = "st,stm32mp157-pinctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50002000 0xa400>; + pins-are-numbered; + + gpioa: gpio@50002000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc_clk GPIOA>; + st,bank-name = "GPIOA"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + status = "disabled"; + }; + + gpiob: gpio@50003000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc_clk GPIOB>; + st,bank-name = "GPIOB"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + status = "disabled"; + }; + + gpioc: gpio@50004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc_clk GPIOC>; + st,bank-name = "GPIOC"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + status = "disabled"; + }; + + gpiod: gpio@50005000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x400>; + clocks = <&rcc_clk GPIOD>; + st,bank-name = "GPIOD"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + status = "disabled"; + }; + + gpioe: gpio@50006000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x400>; + clocks = <&rcc_clk GPIOE>; + st,bank-name = "GPIOE"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + status = "disabled"; + }; + + gpiof: gpio@50007000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x400>; + clocks = <&rcc_clk GPIOF>; + st,bank-name = "GPIOF"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + status = "disabled"; + }; + + gpiog: gpio@50008000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x400>; + clocks = <&rcc_clk GPIOG>; + st,bank-name = "GPIOG"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + status = "disabled"; + }; + + gpioh: gpio@50009000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x400>; + clocks = <&rcc_clk GPIOH>; + st,bank-name = "GPIOH"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + status = "disabled"; + }; + + gpioi: gpio@5000a000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x400>; + clocks = <&rcc_clk GPIOI>; + st,bank-name = "GPIOI"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + status = "disabled"; + }; + + gpioj: gpio@5000b000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x9000 0x400>; + clocks = <&rcc_clk GPIOJ>; + st,bank-name = "GPIOJ"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + status = "disabled"; + }; + + gpiok: gpio@5000c000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xa000 0x400>; + clocks = <&rcc_clk GPIOK>; + st,bank-name = "GPIOK"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + status = "disabled"; + }; + }; + + pinctrl_z: pin-controller-z { + compatible = "st,stm32mp157-z-pinctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x54004000 0x400>; + pins-are-numbered; + + gpioz: gpio@54004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x400>; + clocks = <&rcc_clk GPIOZ>; + st,bank-name = "GPIOZ"; + st,bank-ioport = <11>; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + status = "disabled"; + }; + }; + + sdmmc1: sdmmc@58005000 { + compatible = "st,stm32-sdmmc2"; + reg = <0x58005000 0x1000>, <0x58006000 0x1000>; + reg-names = "sdmmc", "delay"; + clocks = <&rcc_clk SDMMC1_K>; + resets = <&rcc_rst SDMMC1_R>; + st,idma = <1>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; + }; + + sdmmc2: sdmmc@58007000 { + compatible = "st,stm32-sdmmc2"; + reg = <0x58007000 0x1000>, <0x58008000 0x1000>; + reg-names = "sdmmc", "delay"; + interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>; + clocks = <&rcc_clk SDMMC2_K>; + resets = <&rcc_rst SDMMC2_R>; + st,idma = <1>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; + }; + + i2c4: i2c@5c002000 { + compatible = "st,stm32f7-i2c"; + reg = <0x5c002000 0x400>; + interrupt-names = "event", "error", "wakeup"; + clocks = <&rcc_clk I2C4_K>; + resets = <&rcc_rst I2C4_R>; + #address-cells = <1>; + #size-cells = <0>; + wakeup-source; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi new file mode 100644 index 0000000000..2caa939760 --- /dev/null +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi @@ -0,0 +1,155 @@ +/* + * Copyright : STMicroelectronics 2018 + * + * SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause + */ + +#include <dt-bindings/clock/stm32mp1-clksrc.h> +#include "stm32mp157-u-boot.dtsi" +#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi" + +/ { + aliases { + mmc0 = &sdmmc1; + mmc1 = &sdmmc2; + i2c3 = &i2c4; + }; +}; + +&uart4_pins_a { + u-boot,dm-pre-reloc; + pins1 { + u-boot,dm-pre-reloc; + }; + pins2 { + u-boot,dm-pre-reloc; + }; +}; + +&i2c4_pins_a { + u-boot,dm-pre-reloc; + pins { + u-boot,dm-pre-reloc; + }; +}; + +&uart4 { + u-boot,dm-pre-reloc; +}; + +&i2c4 { + u-boot,dm-pre-reloc; +}; + +&pmic { + u-boot,dm-pre-reloc; +}; + +/* CLOCK init */ +&rcc_clk { + st,clksrc = < + CLK_MPU_PLL1P + CLK_AXI_PLL2P + CLK_MCU_PLL3P + CLK_PLL12_HSE + CLK_PLL3_HSE + CLK_PLL4_HSE + CLK_RTC_LSE + CLK_MCO1_DISABLED + CLK_MCO2_DISABLED + >; + + st,clkdiv = < + 1 /*MPU*/ + 0 /*AXI*/ + 0 /*MCU*/ + 1 /*APB1*/ + 1 /*APB2*/ + 1 /*APB3*/ + 1 /*APB4*/ + 2 /*APB5*/ + 23 /*RTC*/ + 0 /*MCO1*/ + 0 /*MCO2*/ + >; + + st,pkcs = < + CLK_CKPER_DISABLED + CLK_SDMMC12_PLL3R + CLK_STGEN_HSE + CLK_I2C46_PCLK5 + CLK_I2C12_PCLK1 + CLK_SDMMC3_PLL3R + CLK_I2C35_PCLK1 + CLK_UART1_PCLK5 + CLK_UART24_PCLK1 + CLK_UART35_PCLK1 + CLK_UART6_PCLK2 + CLK_UART78_PCLK1 + >; + + /* VCO = 1300.0 MHz => P = 650 (CPU) */ + pll1: st,pll@0 { + cfg = < 2 80 0 0 0 PQR(1,0,0) >; + frac = < 0x800 >; + u-boot,dm-pre-reloc; + }; + + /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ + pll2: st,pll@1 { + cfg = < 2 65 1 0 0 PQR(1,1,1) >; + frac = < 0x1400 >; + u-boot,dm-pre-reloc; + }; + + /* VCO = 774.0 MHz => P = 194, Q = 37, R = 97 */ + pll3: st,pll@2 { + cfg = < 3 128 3 20 7 PQR(1,1,1) >; + u-boot,dm-pre-reloc; + }; + + /* VCO = 508.0 MHz => P = 56, Q = 56, R = 56 */ + pll4: st,pll@3 { + cfg = < 5 126 8 8 8 PQR(1,1,1) >; + u-boot,dm-pre-reloc; + }; +}; + +/* SPL part **************************************/ +/* MMC1 boot */ +&sdmmc1_b4_pins_a { + u-boot,dm-spl; + pins { + u-boot,dm-spl; + }; +}; + +&sdmmc1_dir_pins_a { + u-boot,dm-spl; + pins { + u-boot,dm-spl; + }; +}; + +&sdmmc1 { + u-boot,dm-spl; +}; + +/* MMC2 boot */ +&sdmmc2_b4_pins_a { + u-boot,dm-spl; + pins { + u-boot,dm-spl; + }; +}; + +&sdmmc2_d47_pins_a { + u-boot,dm-spl; + pins { + u-boot,dm-spl; + }; +}; + +&sdmmc2 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts new file mode 100644 index 0000000000..129cd02418 --- /dev/null +++ b/arch/arm/dts/stm32mp157c-ed1.dts @@ -0,0 +1,204 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/stm32-pinfunc.h> + +/ { + model = "STMicroelectronics STM32MP157C pmic eval daughter"; + compatible = "st,stm32mp157c-ed1", "st,stm32mp157"; + + chosen { + bootargs = "earlyprintk console=ttyS3,115200 root=/dev/ram"; + stdout-path = "serial3:115200n8"; + }; + + memory { + reg = <0xC0000000 0x40000000>; + }; +}; + +&gpioa { + status = "okay"; +}; + +&gpiob { + status = "okay"; +}; + +&gpioc { + status = "okay"; +}; + +&gpiod { + status = "okay"; +}; + +&gpioe { + status = "okay"; +}; + +&gpiof { + status = "okay"; +}; + +&gpiog { + status = "okay"; +}; + +&gpioh { + status = "okay"; +}; + +&gpioi { + status = "okay"; +}; + +&gpioj { + status = "okay"; +}; + +&gpiok { + status = "okay"; +}; + +&gpioz { + status = "okay"; +}; + +&pinctrl { + uart4_pins_a: uart4@0 { + pins1 { + pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + sdmmc1_b4_pins_a: sdmmc1-b4@0 { + pins { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_dir_pins_a: sdmmc1-dir@0 { + pins { + pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF11)>, /* SDMMC1_CDIR */ + <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */ + slew-rate = <3>; + drive-push-pull; + bias-pull-up; + }; + }; + sdmmc2_b4_pins_a: sdmmc2-b4@0 { + pins { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('E', 3, AF9)>, /* SDMMC2_CK */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <3>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_d47_pins_a: sdmmc2-d47@0 { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */ + slew-rate = <3>; + drive-push-pull; + bias-pull-up; + }; + }; +}; + +&pinctrl_z { + i2c4_pins_a: i2c4@0 { + pins { + pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */ + <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + pmic: stpmu1@33 { + compatible = "st,stpmu1"; + reg = <0x33>; + interrupts = <0 2>; + interrupt-parent = <&gpioa>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + }; +}; + +&sdmmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; + broken-cd; + st,dirpol; + st,negedge; + st,pin-ckin; + bus-width = <4>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + non-removable; + no-sd; + no-sdio; + st,dirpol; + st,negedge; + bus-width = <8>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi b/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi index 9c61beac01..32a263ce3d 100644 --- a/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi +++ b/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi @@ -4,25 +4,38 @@ }; soc { - emac: ethernet@01c30000 { + syscon: syscon@1c00000 { + compatible = "allwinner,sun50i-a64-system-controller", + "syscon"; + reg = <0x01c00000 0x1000>; + }; + + emac: ethernet@1c30000 { compatible = "allwinner,sun50i-a64-emac"; - reg = <0x01c30000 0x2000>, <0x01c00030 0x4>; - reg-names = "emac", "syscon"; + syscon = <&syscon>; + reg = <0x01c30000 0x10000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; resets = <&ccu RST_BUS_EMAC>; - reset-names = "ahb"; + reset-names = "stmmaceth"; clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "ahb"; + clock-names = "stmmaceth"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; phy-mode = "rgmii"; - phy = <&phy1>; + phy-handle = <&ext_rgmii_phy>; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; }; }; }; @@ -30,21 +43,17 @@ &pio { rmii_pins: rmii_pins { - allwinner,pins = "PD10", "PD11", "PD13", "PD14", - "PD17", "PD18", "PD19", "PD20", - "PD22", "PD23"; - allwinner,function = "emac"; - allwinner,drive = <3>; - allwinner,pull = <0>; + pins = "PD10", "PD11", "PD13", "PD14", "PD17", + "PD18", "PD19", "PD20", "PD22", "PD23"; + function = "emac"; + drive-strength = <40>; }; rgmii_pins: rgmii_pins { - allwinner,pins = "PD8", "PD9", "PD10", "PD11", - "PD12", "PD13", "PD15", - "PD16", "PD17", "PD18", "PD19", - "PD20", "PD21", "PD22", "PD23"; - allwinner,function = "emac"; - allwinner,drive = <3>; - allwinner,pull = <0>; + pins = "PD8", "PD9", "PD10", "PD11", "PD12", + "PD13", "PD15", "PD16", "PD17", "PD18", + "PD19", "PD20", "PD21", "PD22", "PD23"; + function = "emac"; + drive-strength = <40>; }; }; diff --git a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts index 780d59a096..d1c347d2b8 100644 --- a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts @@ -108,10 +108,13 @@ pinctrl-names = "default"; pinctrl-0 = <&emac_rgmii_pins>; phy-mode = "rgmii"; - phy = <&phy1>; + phy-handle = <&ext_rgmii_phy>; status = "okay"; +}; - phy1: ethernet-phy@1 { +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; }; }; diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts new file mode 100644 index 0000000000..c56620a8fb --- /dev/null +++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Source for A20-SOM204-EVB-eMMC Board + * + * Copyright (C) 2018 Olimex Ltd. + * Author: Stefan Mavrodiev <stefan@olimex.com> + */ + +/dts-v1/; +#include "sun7i-a20-olimex-som204-evb.dts" + +/ { + model = "Olimex A20-SOM204-EVB-eMMC"; + compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20"; + + mmc2_pwrseq: mmc2_pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&mmc2_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + emmc: emmc@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts new file mode 100644 index 0000000000..c183920cef --- /dev/null +++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts @@ -0,0 +1,296 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Source for A20-SOM204-EVB Board + * + * Copyright (C) 2018 Olimex Ltd. + * Author: Stefan Mavrodiev <stefan@olimex.com> + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Olimex A20-SOM204-EVB"; + compatible = "olimex,a20-olimex-som204-evb", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + serial1 = &uart4; + serial2 = &uart7; + spi0 = &spi1; + spi1 = &spi2; + ethernet1 = &rtl8723bs; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + stat { + label = "a20-som204-evb:green:stat"; + gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led1 { + label = "a20-som204-evb:green:led1"; + gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led2 { + label = "a20-som204-evb:yellow:led2"; + gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + rtl_pwrseq: rtl_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy3>; + phy-mode = "rgmii"; + phy-supply = <®_vcc3v3>; + + snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + status = "okay"; + + phy3: ethernet-phy@3 { + reg = <3>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +/* Exposed to UEXT1 */ +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +/* Exposed to UEXT2 */ +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&rtl_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723bs: sdio_wifi@1 { + reg = <1>; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + bt_uart_pins: bt_uart_pins@0 { + pins = "PG6", "PG7", "PG8"; + function = "uart3"; + }; +}; + +#include "axp209.dtsi" + +®_ahci_5v { + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-always-on; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pg"; +}; + +®_usb0_vbus { + gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +/* Exposed to UEXT1 */ +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>, + <&spi1_cs0_pins_a>; + status = "okay"; +}; + +/* Exposed to UEXT2 */ +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>, + <&spi2_cs0_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +/* Used for RTL8723BS bluetooth */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&bt_uart_pins>; + status = "okay"; +}; + +/* Exposed to UEXT1 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +/* Exposed to UEXT2 */ +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi index ea50dda75a..ffd21487dc 100644 --- a/arch/arm/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/dts/sun8i-a23-a33.dtsi @@ -289,6 +289,23 @@ function = "uart1"; }; + nand_pins_a: nand-base0@0 { + pins = "PC0", "PC1", "PC2", "PC5", + "PC8", "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", "PC15"; + function = "nand0"; + }; + + nand_cs0_pins_a: nand-cs@0 { + pins = "PC4"; + function = "nand0"; + }; + + nand_rb0_pins_a: nand-rb@0 { + pins = "PC6"; + function = "nand0"; + }; + mmc0_pins_a: mmc0@0 { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; diff --git a/arch/arm/dts/sun8i-a83t.dtsi b/arch/arm/dts/sun8i-a83t.dtsi index 0fe73e173f..bab6c1812b 100644 --- a/arch/arm/dts/sun8i-a83t.dtsi +++ b/arch/arm/dts/sun8i-a83t.dtsi @@ -227,6 +227,7 @@ usb_otg: usb@01c19000 { compatible = "allwinner,sun8i-a33-musb"; + reg = <0x01c19000 0x400>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "mc"; status = "disabled"; diff --git a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts index 20d489cb2a..e0efcb3ba3 100644 --- a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts @@ -100,14 +100,10 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&int_mii_phy>; phy-mode = "mii"; - allwinner,use-internal-phy; allwinner,leds-active-low; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &mmc0 { diff --git a/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts index 97b993f636..c8fd69f0a4 100644 --- a/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts +++ b/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts @@ -125,15 +125,10 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&int_mii_phy>; phy-mode = "mii"; - allwinner,use-internal-phy; allwinner,leds-active-low; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &ir { diff --git a/arch/arm/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/dts/sun8i-h3-nanopi-neo.dts index 5113059098..78f6c24952 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-neo.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-neo.dts @@ -48,12 +48,8 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&int_mii_phy>; phy-mode = "mii"; - allwinner,use-internal-phy; allwinner,leds-active-low; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; - }; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-2.dts b/arch/arm/dts/sun8i-h3-orangepi-2.dts index caa1a6959c..d97fdacb35 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-2.dts @@ -55,6 +55,7 @@ aliases { serial0 = &uart0; /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet0 = &emac; ethernet1 = &rtl8189; }; @@ -110,14 +111,10 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&int_mii_phy>; phy-mode = "mii"; - allwinner,use-internal-phy; allwinner,leds-active-low; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &ir { diff --git a/arch/arm/dts/sun8i-h3-orangepi-one.dts b/arch/arm/dts/sun8i-h3-orangepi-one.dts index 8df5c74f04..adab1cbfc9 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-one.dts @@ -53,6 +53,7 @@ compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -95,14 +96,10 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&int_mii_phy>; phy-mode = "mii"; - allwinner,use-internal-phy; allwinner,leds-active-low; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &mmc0 { diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/dts/sun8i-h3-orangepi-pc.dts index b8340f74e7..afba264ea5 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-pc.dts @@ -53,6 +53,7 @@ compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -167,12 +168,8 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&int_mii_phy>; phy-mode = "mii"; - allwinner,use-internal-phy; allwinner,leds-active-low; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; - }; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts index e7079b26bc..136e4414a4 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts @@ -82,7 +82,13 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-mode = "rgmii"; - /delete-property/allwinner,use-internal-phy; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; }; &mmc2 { diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts index f97b040b35..51aaf49b6d 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts @@ -69,8 +69,15 @@ pinctrl-names = "default"; pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; phy-mode = "rgmii"; - /delete-property/allwinner,use-internal-phy; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; }; &pio { diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi index afa60793a2..d9d31fa3f5 100644 --- a/arch/arm/dts/sun8i-h3.dtsi +++ b/arch/arm/dts/sun8i-h3.dtsi @@ -144,9 +144,10 @@ #size-cells = <1>; ranges; - syscon: syscon@01c00000 { - compatible = "allwinner,sun8i-h3-syscon","syscon"; - reg = <0x01c00000 0x34>; + syscon: syscon@1c00000 { + compatible = "allwinner,sun8i-h3-system-controller", + "syscon"; + reg = <0x01c00000 0x1000>; }; dma: dma-controller@01c02000 { @@ -339,15 +340,12 @@ interrupt-controller; #interrupt-cells = <3>; - emac_rgmii_pins: emac0@0 { - allwinner,pins = "PD0", "PD1", "PD2", "PD3", - "PD4", "PD5", "PD7", - "PD8", "PD9", "PD10", - "PD12", "PD13", "PD15", - "PD16", "PD17"; - allwinner,function = "emac"; - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + emac_rgmii_pins: emac0 { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", + "PD5", "PD7", "PD8", "PD9", "PD10", + "PD12", "PD13", "PD15", "PD16", "PD17"; + function = "emac"; + drive-strength = <40>; }; mmc0_pins_a: mmc0@0 { @@ -466,16 +464,51 @@ emac: ethernet@1c30000 { compatible = "allwinner,sun8i-h3-emac"; - reg = <0x01c30000 0x104>, <0x01c00030 0x4>; - reg-names = "emac", "syscon"; + syscon = <&syscon>; + reg = <0x01c30000 0x10000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - resets = <&ccu RST_BUS_EMAC>, <&ccu RST_BUS_EPHY>; - reset-names = "ahb", "ephy"; - clocks = <&ccu CLK_BUS_EMAC>, <&ccu CLK_BUS_EPHY>; - clock-names = "ahb", "ephy"; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio>; + /* Only one MDIO is usable at the time */ + internal_mdio: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + int_mii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; + + external_mdio: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; gic: interrupt-controller@01c81000 { diff --git a/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts b/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts index dce688ec8e..72a8505d94 100644 --- a/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts +++ b/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts @@ -61,3 +61,17 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; + status = "okay"; + + nand@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + allwinner,rb = <0>; + nand-ecc-mode = "hw"; + }; +}; diff --git a/arch/arm/dts/uniphier-ld11.dtsi b/arch/arm/dts/uniphier-ld11.dtsi index 40f27bbb64..8b5b363508 100644 --- a/arch/arm/dts/uniphier-ld11.dtsi +++ b/arch/arm/dts/uniphier-ld11.dtsi @@ -352,6 +352,7 @@ <&mio_clk 12>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>; + has-transaction-translator; }; usb1: usb@5a810100 { @@ -365,6 +366,7 @@ <&mio_clk 13>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>; + has-transaction-translator; }; usb2: usb@5a820100 { @@ -378,6 +380,7 @@ <&mio_clk 14>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>; + has-transaction-translator; }; mioctrl@5b3e0000 { diff --git a/arch/arm/dts/uniphier-ld4.dtsi b/arch/arm/dts/uniphier-ld4.dtsi index 4f8f386ebd..0393bceffa 100644 --- a/arch/arm/dts/uniphier-ld4.dtsi +++ b/arch/arm/dts/uniphier-ld4.dtsi @@ -276,6 +276,7 @@ <&mio_clk 12>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>; + has-transaction-translator; }; usb1: usb@5a810100 { @@ -289,6 +290,7 @@ <&mio_clk 13>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>; + has-transaction-translator; }; usb2: usb@5a820100 { @@ -302,6 +304,7 @@ <&mio_clk 14>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>; + has-transaction-translator; }; soc-glue@5f800000 { @@ -314,6 +317,24 @@ }; }; + soc-glue@5f900000 { + compatible = "socionext,uniphier-ld4-soc-glue-debug", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@130 { + compatible = "socionext,uniphier-efuse"; + reg = <0x130 0x8>; + }; + }; + timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; diff --git a/arch/arm/dts/uniphier-pro4-ref.dts b/arch/arm/dts/uniphier-pro4-ref.dts index 3f9ce6d3dd..c2466cdfe5 100644 --- a/arch/arm/dts/uniphier-pro4-ref.dts +++ b/arch/arm/dts/uniphier-pro4-ref.dts @@ -91,3 +91,7 @@ &usb1 { status = "okay"; }; + +&nand { + status = "okay"; +}; diff --git a/arch/arm/dts/uniphier-pro4.dtsi b/arch/arm/dts/uniphier-pro4.dtsi index 9b3ce13499..e9d3a3d186 100644 --- a/arch/arm/dts/uniphier-pro4.dtsi +++ b/arch/arm/dts/uniphier-pro4.dtsi @@ -327,6 +327,7 @@ <&mio_clk 12>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>; + has-transaction-translator; }; usb3: usb@5a810100 { @@ -340,6 +341,7 @@ <&mio_clk 13>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>; + has-transaction-translator; }; soc-glue@5f800000 { @@ -352,6 +354,29 @@ }; }; + soc-glue@5f900000 { + compatible = "socionext,uniphier-pro4-soc-glue-debug", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@130 { + compatible = "socionext,uniphier-efuse"; + reg = <0x130 0x8>; + }; + + efuse@200 { + compatible = "socionext,uniphier-efuse"; + reg = <0x200 0x14>; + }; + }; + aidet: aidet@5fc20000 { compatible = "socionext,uniphier-pro4-aidet"; reg = <0x5fc20000 0x200>; diff --git a/arch/arm/dts/uniphier-pro5.dtsi b/arch/arm/dts/uniphier-pro5.dtsi index c3b627cf47..a4de9b8aac 100644 --- a/arch/arm/dts/uniphier-pro5.dtsi +++ b/arch/arm/dts/uniphier-pro5.dtsi @@ -359,6 +359,39 @@ }; }; + soc-glue@5f900000 { + compatible = "socionext,uniphier-pro5-soc-glue-debug", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@130 { + compatible = "socionext,uniphier-efuse"; + reg = <0x130 0x8>; + }; + + efuse@200 { + compatible = "socionext,uniphier-efuse"; + reg = <0x200 0x28>; + }; + + efuse@300 { + compatible = "socionext,uniphier-efuse"; + reg = <0x300 0x14>; + }; + + efuse@400 { + compatible = "socionext,uniphier-efuse"; + reg = <0x400 0x8>; + }; + }; + aidet: aidet@5fc20000 { compatible = "socionext,uniphier-pro5-aidet"; reg = <0x5fc20000 0x200>; diff --git a/arch/arm/dts/uniphier-pxs2.dtsi b/arch/arm/dts/uniphier-pxs2.dtsi index 549d930cee..7822c9e128 100644 --- a/arch/arm/dts/uniphier-pxs2.dtsi +++ b/arch/arm/dts/uniphier-pxs2.dtsi @@ -415,6 +415,24 @@ }; }; + soc-glue@5f900000 { + compatible = "socionext,uniphier-pxs2-soc-glue-debug", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@200 { + compatible = "socionext,uniphier-efuse"; + reg = <0x200 0x58>; + }; + }; + aidet: aidet@5fc20000 { compatible = "socionext,uniphier-pxs2-aidet"; reg = <0x5fc20000 0x200>; diff --git a/arch/arm/dts/uniphier-pxs3-ref.dts b/arch/arm/dts/uniphier-pxs3-ref.dts index f5496100ac..0463a8f0ba 100644 --- a/arch/arm/dts/uniphier-pxs3-ref.dts +++ b/arch/arm/dts/uniphier-pxs3-ref.dts @@ -45,6 +45,14 @@ status = "okay"; }; +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + &gpio { xirq4 { gpio-hog; diff --git a/arch/arm/dts/uniphier-pxs3.dtsi b/arch/arm/dts/uniphier-pxs3.dtsi index 9c3aad5043..87ab5e7ff8 100644 --- a/arch/arm/dts/uniphier-pxs3.dtsi +++ b/arch/arm/dts/uniphier-pxs3.dtsi @@ -203,8 +203,8 @@ gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinctrl 0 0 0>, - <&pinctrl 96 0 0>, - <&pinctrl 160 0 0>; + <&pinctrl 104 0 0>, + <&pinctrl 168 0 0>; gpio-ranges-group-names = "gpio_range0", "gpio_range1", "gpio_range2"; diff --git a/arch/arm/dts/uniphier-sld8.dtsi b/arch/arm/dts/uniphier-sld8.dtsi index c759ac6472..fc7585b2ce 100644 --- a/arch/arm/dts/uniphier-sld8.dtsi +++ b/arch/arm/dts/uniphier-sld8.dtsi @@ -280,6 +280,7 @@ <&mio_clk 12>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>; + has-transaction-translator; }; usb1: usb@5a810100 { @@ -293,6 +294,7 @@ <&mio_clk 13>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>; + has-transaction-translator; }; usb2: usb@5a820100 { @@ -306,6 +308,7 @@ <&mio_clk 14>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>; + has-transaction-translator; }; soc-glue@5f800000 { @@ -318,6 +321,24 @@ }; }; + soc-glue@5f900000 { + compatible = "socionext,uniphier-sld8-soc-glue-debug", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@200 { + compatible = "socionext,uniphier-efuse"; + reg = <0x200 0x14>; + }; + }; + timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; diff --git a/arch/arm/dts/zynq-cc108.dts b/arch/arm/dts/zynq-cc108.dts index 4804da5235..5f8a0d2555 100644 --- a/arch/arm/dts/zynq-cc108.dts +++ b/arch/arm/dts/zynq-cc108.dts @@ -1,13 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Xilinx CC108 board DTS * - * (C) Copyright 2007-2013 Xilinx, Inc. + * (C) Copyright 2007-2018 Xilinx, Inc. * (C) Copyright 2007-2013 Michal Simek * (C) Copyright 2007-2012 PetaLogix Qld Pty Ltd * * Michal SIMEK <monstr@monstr.eu> - * - * SPDX-License-Identifier: GPL-2.0+ */ /dts-v1/; /include/ "zynq-7000.dtsi" @@ -70,23 +69,23 @@ label = "qspi-fsbl-uboot-bs"; reg = <0x0 0x400000>; /* 4MB */ }; - partition@0x400000 { + partition@400000 { label = "qspi-linux"; reg = <0x400000 0x400000>; /* 4MB */ }; - partition@0x800000 { + partition@800000 { label = "qspi-rootfs"; reg = <0x800000 0x400000>; /* 4MB */ }; - partition@0xc00000 { + partition@c00000 { label = "qspi-devicetree"; reg = <0xc00000 0x100000>; /* 1MB */ }; - partition@0xd00000 { + partition@d00000 { label = "qspi-scratch"; reg = <0xd00000 0x200000>; /* 2MB */ }; - partition@0xf00000 { + partition@f00000 { label = "qspi-uboot-env"; reg = <0xf00000 0x100000>; /* 1MB */ }; diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts index da698a19cc..bb224662bb 100644 --- a/arch/arm/dts/zynq-zc702.dts +++ b/arch/arm/dts/zynq-zc702.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Xilinx ZC702 board DTS - * * Copyright (C) 2011 - 2015 Xilinx * Copyright (C) 2012 National Instruments Corp. - * - * SPDX-License-Identifier: GPL-2.0+ */ /dts-v1/; #include "zynq-7000.dtsi" @@ -114,7 +111,7 @@ scl-gpios = <&gpio0 50 0>; sda-gpios = <&gpio0 51 0>; - i2cswitch@74 { + i2c-mux@74 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; @@ -154,7 +151,7 @@ #size-cells = <0>; reg = <2>; eeprom@54 { - compatible = "at,24c08"; + compatible = "atmel,24c08"; reg = <0x54>; }; }; diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts index d342306293..f24364b385 100644 --- a/arch/arm/dts/zynq-zc706.dts +++ b/arch/arm/dts/zynq-zc706.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Xilinx ZC706 board DTS - * * Copyright (C) 2011 - 2015 Xilinx * Copyright (C) 2012 National Instruments Corp. - * - * SPDX-License-Identifier: GPL-2.0+ */ /dts-v1/; #include "zynq-7000.dtsi" @@ -65,7 +62,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0_default>; - i2cswitch@74 { + i2c-mux@74 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; @@ -105,7 +102,7 @@ #size-cells = <0>; reg = <2>; eeprom@54 { - compatible = "at,24c08"; + compatible = "atmel,24c08"; reg = <0x54>; }; }; @@ -333,3 +330,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; }; + +&watchdog0 { + reset-on-timeout; +}; diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts index cc5ba98d6b..a779672f3a 100644 --- a/arch/arm/dts/zynq-zc770-xm010.dts +++ b/arch/arm/dts/zynq-zc770-xm010.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Xilinx ZC770 XM010 board DTS * - * Copyright (C) 2013 - 2015 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ + * Copyright (C) 2013-2018 Xilinx, Inc. */ /dts-v1/; #include "zynq-7000.dtsi" @@ -55,8 +54,8 @@ status = "okay"; clock-frequency = <400000>; - m24c02_eeprom@52 { - compatible = "at,24c02"; + eeprom: eeprom@52 { + compatible = "atmel,24c02"; reg = <0x52>; }; @@ -75,14 +74,17 @@ num-cs = <4>; is-decoded-cs = <0>; flash@0 { - compatible = "sst25wf080"; + compatible = "sst25wf080", "jedec,spi-nor"; reg = <1>; spi-max-frequency = <1000000>; - #address-cells = <1>; - #size-cells = <1>; - partition@test { - label = "spi-flash"; - reg = <0x0 0x100000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "data"; + reg = <0x0 0x100000>; + }; }; }; }; diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts index 7f08961491..3fe6eb559e 100644 --- a/arch/arm/dts/zynq-zc770-xm011.dts +++ b/arch/arm/dts/zynq-zc770-xm011.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Xilinx ZC770 XM013 board DTS * - * Copyright (C) 2013 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ + * Copyright (C) 2013-2018 Xilinx, Inc. */ /dts-v1/; #include "zynq-7000.dtsi" @@ -42,8 +41,8 @@ status = "okay"; clock-frequency = <400000>; - m24c02_eeprom@52 { - compatible = "at,24c02"; + eeprom: eeprom@52 { + compatible = "atmel,24c02"; reg = <0x52>; }; }; diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts index 699cd2c0fb..19d5b275ae 100644 --- a/arch/arm/dts/zynq-zc770-xm012.dts +++ b/arch/arm/dts/zynq-zc770-xm012.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Xilinx ZC770 XM012 board DTS * - * Copyright (C) 2013 - 2015 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ + * Copyright (C) 2013-2018 Xilinx, Inc. */ /dts-v1/; #include "zynq-7000.dtsi" @@ -38,8 +37,8 @@ status = "okay"; clock-frequency = <400000>; - m24c02_eeprom@52 { - compatible = "at,24c02"; + eeprom0: eeprom@52 { + compatible = "atmel,24c02"; reg = <0x52>; }; }; @@ -48,8 +47,8 @@ status = "okay"; clock-frequency = <400000>; - m24c02_eeprom@52 { - compatible = "at,24c02"; + eeprom1: eeprom@52 { + compatible = "atmel,24c02"; reg = <0x52>; }; }; diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts index 81a6aa562a..efd0833eab 100644 --- a/arch/arm/dts/zynq-zc770-xm013.dts +++ b/arch/arm/dts/zynq-zc770-xm013.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Xilinx ZC770 XM013 board DTS * * Copyright (C) 2013 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ */ /dts-v1/; #include "zynq-7000.dtsi" @@ -68,7 +67,7 @@ status = "okay"; num-cs = <4>; is-decoded-cs = <0>; - eeprom: at25@0 { + eeprom: eeprom@0 { at25,byte-len = <8192>; at25,addr-mode = <2>; at25,page-size = <32>; diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts index a9ff0e6fa8..24eccf1633 100644 --- a/arch/arm/dts/zynq-zed.dts +++ b/arch/arm/dts/zynq-zed.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Xilinx ZED board DTS - * * Copyright (C) 2011 - 2015 Xilinx * Copyright (C) 2012 National Instruments Corp. - * - * SPDX-License-Identifier: GPL-2.0+ */ /dts-v1/; #include "zynq-7000.dtsi" diff --git a/arch/arm/dts/zynq-zturn-myir.dts b/arch/arm/dts/zynq-zturn.dts index a5ecfcc1d7..8aa384b59b 100644 --- a/arch/arm/dts/zynq-zturn-myir.dts +++ b/arch/arm/dts/zynq-zturn.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com> * Copyright (C) 2017 Alexander Graf <agraf@suse.de> @@ -6,31 +7,23 @@ * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ + /dts-v1/; /include/ "zynq-7000.dtsi" / { model = "Zynq Z-Turn MYIR Board"; - compatible = "xlnx,zynq-7000"; + compatible = "myir,zynq-zturn", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; serial0 = &uart1; serial1 = &uart0; - spi0 = &qspi; mmc0 = &sdhci0; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x40000000>; }; @@ -41,52 +34,23 @@ gpio-leds { compatible = "gpio-leds"; - led_r { - label = "led_r"; - gpios = <&gpio0 0x72 0x1>; - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - led_g { - label = "led_g"; - gpios = <&gpio0 0x73 0x1>; - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - led_b { - label = "led_b"; - gpios = <&gpio0 0x74 0x1>; - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - usr_led1 { - label = "usr_led1"; + usr-led1 { + label = "usr-led1"; gpios = <&gpio0 0x0 0x1>; default-state = "off"; - linux,default-trigger = "none"; }; - usr_led2 { - label = "usr_led2"; + usr-led2 { + label = "usr-led2"; gpios = <&gpio0 0x9 0x1>; default-state = "off"; - linux,default-trigger = "none"; }; }; - gpio-beep { - compatible = "gpio-beeper"; - label = "pl-beep"; - gpios = <&gpio0 0x75 0x0>; - }; - gpio-keys { compatible = "gpio-keys"; - #address-cells = <0x1>; - #size-cells = <0x0>; + #address-cells = <1>; + #size-cells = <0>; autorepeat; K1 { label = "K1"; @@ -100,7 +64,6 @@ &clkc { ps-clk-frequency = <33333333>; - fclk-enable = <0xf>; }; &qspi { @@ -152,8 +115,8 @@ reg = <0x49>; }; - adxl345@53 { - compatible = "adi,adxl34x", "adxl34x"; + accelerometer@53 { + compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x"; reg = <0x53>; interrupt-parent = <&intc>; interrupts = <0x0 0x1e 0x4>; diff --git a/arch/arm/dts/zynq-zybo.dts b/arch/arm/dts/zynq-zybo.dts index 52ec5a4566..3844822305 100644 --- a/arch/arm/dts/zynq-zybo.dts +++ b/arch/arm/dts/zynq-zybo.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Digilent ZYBO board DTS - * * Copyright (C) 2011 - 2015 Xilinx * Copyright (C) 2012 National Instruments Corp. - * - * SPDX-License-Identifier: GPL-2.0+ */ /dts-v1/; #include "zynq-7000.dtsi" diff --git a/arch/arm/dts/zynqmp-clk-ccf.dtsi b/arch/arm/dts/zynqmp-clk-ccf.dtsi new file mode 100644 index 0000000000..b18d8d19c3 --- /dev/null +++ b/arch/arm/dts/zynqmp-clk-ccf.dtsi @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Clock specification for Xilinx ZynqMP + * + * (C) Copyright 2017, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/ { + fclk0: fclk0 { + status = "disabled"; + compatible = "xlnx,fclk"; + clocks = <&clkc 71>; + }; + + fclk1: fclk1 { + status = "disabled"; + compatible = "xlnx,fclk"; + clocks = <&clkc 72>; + }; + + fclk2: fclk2 { + status = "disabled"; + compatible = "xlnx,fclk"; + clocks = <&clkc 73>; + }; + + fclk3: fclk3 { + status = "disabled"; + compatible = "xlnx,fclk"; + clocks = <&clkc 74>; + }; + + pss_ref_clk: pss_ref_clk { + u-boot,dm-pre-reloc; + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33333333>; + }; + + video_clk: video_clk { + u-boot,dm-pre-reloc; + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + pss_alt_ref_clk: pss_alt_ref_clk { + u-boot,dm-pre-reloc; + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + gt_crx_ref_clk: gt_crx_ref_clk { + u-boot,dm-pre-reloc; + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <108000000>; + }; + + aux_ref_clk: aux_ref_clk { + u-boot,dm-pre-reloc; + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + clkc: clkc { + u-boot,dm-pre-reloc; + #clock-cells = <1>; + compatible = "xlnx,zynqmp-clkc"; + clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <>_crx_ref_clk>; + clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk", "aux_ref_clk", "gt_crx_ref_clk"; + clock-output-names = "iopll", "rpll", "apll", "dpll", + "vpll", "iopll_to_fpd", "rpll_to_fpd", + "apll_to_lpd", "dpll_to_lpd", "vpll_to_lpd", + "acpu", "acpu_half", "dbf_fpd", "dbf_lpd", + "dbg_trace", "dbg_tstmp", "dp_video_ref", + "dp_audio_ref", "dp_stc_ref", "gdma_ref", + "dpdma_ref", "ddr_ref", "sata_ref", "pcie_ref", + "gpu_ref", "gpu_pp0_ref", "gpu_pp1_ref", + "topsw_main", "topsw_lsbus", "gtgref0_ref", + "lpd_switch", "lpd_lsbus", "usb0_bus_ref", + "usb1_bus_ref", "usb3_dual_ref", "usb0", + "usb1", "cpu_r5", "cpu_r5_core", "csu_spb", + "csu_pll", "pcap", "iou_switch", "gem_tsu_ref", + "gem_tsu", "gem0_ref", "gem1_ref", "gem2_ref", + "gem3_ref", "gem0_tx", "gem1_tx", "gem2_tx", + "gem3_tx", "qspi_ref", "sdio0_ref", "sdio1_ref", + "uart0_ref", "uart1_ref", "spi0_ref", + "spi1_ref", "nand_ref", "i2c0_ref", "i2c1_ref", + "can0_ref", "can1_ref", "can0", "can1", + "dll_ref", "adma_ref", "timestamp_ref", + "ams_ref", "pl0", "pl1", "pl2", "pl3", "wdt"; + }; + + dp_aclk: dp_aclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-accuracy = <100>; + }; +}; + +&can0 { + clocks = <&clkc 63>, <&clkc 31>; +}; + +&can1 { + clocks = <&clkc 64>, <&clkc 31>; +}; + +&cpu0 { + clocks = <&clkc 10>; +}; + +&fpd_dma_chan1 { + clocks = <&clkc 19>, <&clkc 31>; +}; + +&fpd_dma_chan2 { + clocks = <&clkc 19>, <&clkc 31>; +}; + +&fpd_dma_chan3 { + clocks = <&clkc 19>, <&clkc 31>; +}; + +&fpd_dma_chan4 { + clocks = <&clkc 19>, <&clkc 31>; +}; + +&fpd_dma_chan5 { + clocks = <&clkc 19>, <&clkc 31>; +}; + +&fpd_dma_chan6 { + clocks = <&clkc 19>, <&clkc 31>; +}; + +&fpd_dma_chan7 { + clocks = <&clkc 19>, <&clkc 31>; +}; + +&fpd_dma_chan8 { + clocks = <&clkc 19>, <&clkc 31>; +}; + +&gpu { + clocks = <&clkc 24>, <&clkc 25>, <&clkc 26>; +}; + +&lpd_dma_chan1 { + clocks = <&clkc 68>, <&clkc 31>; +}; + +&lpd_dma_chan2 { + clocks = <&clkc 68>, <&clkc 31>; +}; + +&lpd_dma_chan3 { + clocks = <&clkc 68>, <&clkc 31>; +}; + +&lpd_dma_chan4 { + clocks = <&clkc 68>, <&clkc 31>; +}; + +&lpd_dma_chan5 { + clocks = <&clkc 68>, <&clkc 31>; +}; + +&lpd_dma_chan6 { + clocks = <&clkc 68>, <&clkc 31>; +}; + +&lpd_dma_chan7 { + clocks = <&clkc 68>, <&clkc 31>; +}; + +&lpd_dma_chan8 { + clocks = <&clkc 68>, <&clkc 31>; +}; + +&nand0 { + clocks = <&clkc 60>, <&clkc 31>; +}; + +&gem0 { + clocks = <&clkc 31>, <&clkc 49>, <&clkc 45>, <&clkc 49>, <&clkc 44>; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; +}; + +&gem1 { + clocks = <&clkc 31>, <&clkc 50>, <&clkc 46>, <&clkc 50>, <&clkc 44>; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; +}; + +&gem2 { + clocks = <&clkc 31>, <&clkc 51>, <&clkc 47>, <&clkc 51>, <&clkc 44>; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; +}; + +&gem3 { + clocks = <&clkc 31>, <&clkc 52>, <&clkc 48>, <&clkc 52>, <&clkc 44>; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; +}; + +&gpio { + clocks = <&clkc 31>; +}; + +&i2c0 { + clocks = <&clkc 61>; +}; + +&i2c1 { + clocks = <&clkc 62>; +}; + +&pcie { + clocks = <&clkc 23>; +}; + +&qspi { + clocks = <&clkc 53>, <&clkc 31>; +}; + +&sata { + clocks = <&clkc 22>; +}; + +&sdhci0 { + clocks = <&clkc 54>, <&clkc 31>; +}; + +&sdhci1 { + clocks = <&clkc 55>, <&clkc 31>; +}; + +&spi0 { + clocks = <&clkc 58>, <&clkc 31>; +}; + +&spi1 { + clocks = <&clkc 59>, <&clkc 31>; +}; + +&uart0 { + clocks = <&clkc 56>, <&clkc 31>; +}; + +&uart1 { + clocks = <&clkc 57>, <&clkc 31>; +}; + +&usb0 { + clocks = <&clkc 32>, <&clkc 34>; +}; + +&usb1 { + clocks = <&clkc 33>, <&clkc 34>; +}; + +&watchdog0 { + clocks = <&clkc 75>; +}; + +&xilinx_ams { + clocks = <&clkc 70>; +}; + +&xilinx_drm { + clocks = <&clkc 16>; +}; + +&xlnx_dp { + clocks = <&dp_aclk>, <&clkc 17>; +}; + +&xlnx_dpdma { + clocks = <&clkc 20>; +}; + +&xlnx_dp_snd_codec0 { + clocks = <&clkc 17>; +}; diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi index f6e83e1513..a8664e8187 100644 --- a/arch/arm/dts/zynqmp-clk.dtsi +++ b/arch/arm/dts/zynqmp-clk.dtsi @@ -1,11 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Clock specification for Xilinx ZynqMP * - * (C) Copyright 2015, Xilinx, Inc. + * (C) Copyright 2015 - 2018, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> - * - * SPDX-License-Identifier: GPL-2.0+ */ / { @@ -26,6 +25,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <200000000>; + u-boot,dm-pre-reloc; }; clk250: clk250 { diff --git a/arch/arm/dts/zynqmp-ep108-clk.dtsi b/arch/arm/dts/zynqmp-ep108-clk.dtsi deleted file mode 100644 index 12d9fe1498..0000000000 --- a/arch/arm/dts/zynqmp-ep108-clk.dtsi +++ /dev/null @@ -1,172 +0,0 @@ -/* - * clock specification for Xilinx ZynqMP ep108 development board - * - * (C) Copyright 2015, Xilinx, Inc. - * - * Michal Simek <michal.simek@xilinx.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/ { - misc_clk: misc_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - u-boot,dm-pre-reloc; - }; - - i2c_clk: i2c_clk { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <111111111>; - }; - - sata_clk: sata_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <75000000>; - }; - - dp_aclk: clock0 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - clock-accuracy = <100>; - }; - - clk100: clk100 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - - clk600: clk600 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <600000000>; - }; - - dp_aud_clk: clock1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <22579200>; - clock-accuracy = <100>; - }; -}; - -&can0 { - clocks = <&misc_clk &misc_clk>; -}; - -&can1 { - clocks = <&misc_clk &misc_clk>; -}; - -&fpd_dma_chan1 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan2 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan3 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan4 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan5 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan6 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan7 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan8 { - clocks = <&clk600>, <&clk100>; -}; - -&gem0 { - clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; -}; - -&gpio { - clocks = <&misc_clk>; -}; - -&i2c0 { - clocks = <&i2c_clk>; -}; - -&i2c1 { - clocks = <&i2c_clk>; -}; - -&nand0 { - clocks = <&misc_clk &misc_clk>; -}; - -&qspi { - clocks = <&misc_clk &misc_clk>; -}; - -&sata { - clocks = <&sata_clk>; -}; - -&sdhci0 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&sdhci1 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&spi0 { - clocks = <&misc_clk &misc_clk>; -}; - -&spi1 { - clocks = <&misc_clk &misc_clk>; -}; - -&uart0 { - clocks = <&misc_clk &misc_clk>; -}; - -&usb0 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&usb1 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&watchdog0 { - clocks= <&misc_clk>; -}; - -&xilinx_drm { - clocks = <&misc_clk>; -}; - -&xlnx_dp { - clocks = <&dp_aclk>, <&dp_aud_clk>; -}; - -&xlnx_dp_snd_codec0 { - clocks = <&dp_aud_clk>; -}; - -&xlnx_dpdma { - clocks = <&misc_clk>; -}; diff --git a/arch/arm/dts/zynqmp-ep108.dts b/arch/arm/dts/zynqmp-ep108.dts deleted file mode 100644 index a16ffdc3f0..0000000000 --- a/arch/arm/dts/zynqmp-ep108.dts +++ /dev/null @@ -1,235 +0,0 @@ -/* - * dts file for Xilinx ZynqMP ep108 development board - * - * (C) Copyright 2014 - 2015, Xilinx, Inc. - * - * Michal Simek <michal.simek@xilinx.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/dts-v1/; - -#include "zynqmp.dtsi" -#include "zynqmp-ep108-clk.dtsi" - -/ { - model = "ZynqMP EP108"; - - aliases { - ethernet0 = &gem0; - mmc0 = &sdhci0; - mmc1 = &sdhci1; - serial0 = &uart0; - spi0 = &qspi; - spi1 = &spi0; - spi2 = &spi1; - usb0 = &usb0; - usb1 = &usb1; - }; - - chosen { - bootargs = "earlycon"; - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; -}; - -&can0 { - status = "okay"; -}; - -&can1 { - status = "okay"; -}; - -&gem0 { - status = "okay"; - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - phy0: phy@0 { - reg = <0>; - max-speed = <100>; - }; -}; - -&gpio { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - clock-frequency = <400000>; - eeprom@54 { - compatible = "atmel,24c64"; - reg = <0x54>; - }; -}; - -&i2c1 { - status = "okay"; - clock-frequency = <400000>; - eeprom@55 { - compatible = "atmel,24c64"; - reg = <0x55>; - }; -}; - -&nand0 { - status = "okay"; - arasan,has-mdma; - num-cs = <1>; - - partition@0 { /* for testing purpose */ - label = "nand-fsbl-uboot"; - reg = <0x0 0x0 0x400000>; - }; - partition@1 { /* for testing purpose */ - label = "nand-linux"; - reg = <0x0 0x400000 0x1400000>; - }; - partition@2 { /* for testing purpose */ - label = "nand-device-tree"; - reg = <0x0 0x1800000 0x400000>; - }; - partition@3 { /* for testing purpose */ - label = "nand-rootfs"; - reg = <0x0 0x1C00000 0x1400000>; - }; - partition@4 { /* for testing purpose */ - label = "nand-bitstream"; - reg = <0x0 0x3000000 0x400000>; - }; - partition@5 { /* for testing purpose */ - label = "nand-misc"; - reg = <0x0 0x3400000 0xFCC00000>; - }; -}; - -&qspi { - status = "okay"; - flash@0 { - compatible = "m25p80"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x0>; - spi-tx-bus-width = <1>; - spi-rx-bus-width = <4>; - spi-max-frequency = <10000000>; - partition@qspi-fsbl-uboot { /* for testing purpose */ - label = "qspi-fsbl-uboot"; - reg = <0x0 0x100000>; - }; - partition@qspi-linux { /* for testing purpose */ - label = "qspi-linux"; - reg = <0x100000 0x500000>; - }; - partition@qspi-device-tree { /* for testing purpose */ - label = "qspi-device-tree"; - reg = <0x600000 0x20000>; - }; - partition@qspi-rootfs { /* for testing purpose */ - label = "qspi-rootfs"; - reg = <0x620000 0x5E0000>; - }; - }; -}; - -&sata { - status = "okay"; - ceva,broken-gen2; - /* SATA Phy OOB timing settings */ - ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; - ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; - ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; - ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>; - ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; - ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; - ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; - ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>; -}; - -&sdhci0 { - status = "okay"; - bus-width = <8>; - xlnx,mio_bank = <2>; -}; - -&sdhci1 { - status = "okay"; - xlnx,mio_bank = <1>; -}; - -&spi0 { - status = "okay"; - num-cs = <1>; - spi0_flash0: spi0_flash0@0 { - compatible = "m25p80"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - spi0_flash0@0 { - label = "spi0_flash0"; - reg = <0x0 0x100000>; - }; - }; -}; - -&spi1 { - status = "okay"; - num-cs = <1>; - spi1_flash0: spi1_flash0@0 { - compatible = "m25p80"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - spi1_flash0@0 { - label = "spi1_flash0"; - reg = <0x0 0x100000>; - }; - }; -}; - -&uart0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&dwc3_0 { - status = "okay"; - dr_mode = "peripheral"; - maximum-speed = "high-speed"; -}; - -&usb1 { - status = "okay"; -}; - -&dwc3_1 { - status = "okay"; - dr_mode = "host"; - maximum-speed = "high-speed"; -}; - -&watchdog0 { - status = "okay"; -}; - -&xlnx_dp { - xlnx,max-pclock-frequency = <200000>; -}; - -&xlnx_dpdma { - xlnx,axi-clock-freq = <200000000>; -}; diff --git a/arch/arm/dts/zynqmp-zc1232-revA.dts b/arch/arm/dts/zynqmp-zc1232-revA.dts new file mode 100644 index 0000000000..ea1ca561a1 --- /dev/null +++ b/arch/arm/dts/zynqmp-zc1232-revA.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZC1232 + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/phy/phy.h> + +/ { + model = "ZynqMP ZC1232 RevA"; + compatible = "xlnx,zynqmp-zc1232-revA", "xlnx,zynqmp-zc1232", "xlnx,zynqmp"; + + aliases { + serial0 = &uart0; + serial1 = &dcc; + spi0 = &qspi; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&dcc { + status = "okay"; +}; + +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80"; /* 32MB FIXME */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + partition@qspi-fsbl-uboot { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@qspi-linux { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@qspi-device-tree { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@qspi-rootfs { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5E0000>; + }; + }; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&lane0 PHY_TYPE_SATA 0 0 125000000>, <&lane1 PHY_TYPE_SATA 1 1 125000000>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/dts/zynqmp-zc1254-revA.dts b/arch/arm/dts/zynqmp-zc1254-revA.dts new file mode 100644 index 0000000000..2493883e6f --- /dev/null +++ b/arch/arm/dts/zynqmp-zc1254-revA.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZC1254 + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + * Siva Durga Prasad Paladugu <sivadur@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" + +/ { + model = "ZynqMP ZC1254 RevA"; + compatible = "xlnx,zynqmp-zc1254-revA", "xlnx,zynqmp-zc1254", "xlnx,zynqmp"; + + aliases { + serial0 = &uart0; + serial1 = &dcc; + spi0 = &qspi; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&dcc { + status = "okay"; +}; + +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80"; /* 32MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + partition@qspi-fsbl-uboot { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@qspi-linux { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@qspi-device-tree { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@qspi-rootfs { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5E0000>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/dts/zynqmp-zc1275-revA.dts b/arch/arm/dts/zynqmp-zc1275-revA.dts new file mode 100644 index 0000000000..2543a674ca --- /dev/null +++ b/arch/arm/dts/zynqmp-zc1275-revA.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZC1275 + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + * Siva Durga Prasad Paladugu <sivadur@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" + +/ { + model = "ZynqMP ZC1275 RevA"; + compatible = "xlnx,zynqmp-zc1275-revA", "xlnx,zynqmp-zc1275", "xlnx,zynqmp"; + + aliases { + serial0 = &uart0; + serial1 = &dcc; + spi0 = &qspi; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&dcc { + status = "okay"; +}; + +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80"; /* 32MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + partition@qspi-fsbl-uboot { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@qspi-linux { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@qspi-device-tree { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@qspi-rootfs { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5E0000>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts index 04d82c4d2e..c794c91de1 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts @@ -1,17 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * dts file for Xilinx ZynqMP zc1751-xm015-dc1 * - * (C) Copyright 2015, Xilinx, Inc. + * (C) Copyright 2015 - 2018, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> - * - * SPDX-License-Identifier: GPL-2.0+ */ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" / { model = "ZynqMP zc1751-xm015-dc1 RevA"; @@ -40,7 +39,6 @@ }; }; -/* fpd_dma clk 667MHz, lpd_dma 500MHz */ &fpd_dma_chan1 { status = "okay"; }; @@ -93,8 +91,9 @@ &i2c1 { status = "okay"; clock-frequency = <400000>; - eeprom@55 { - compatible = "at,24c64"; /* 24AA64 */ + + eeprom: eeprom@55 { + compatible = "atmel,24c64"; /* 24AA64 */ reg = <0x55>; }; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts index 7dfe960135..afa90a8a5b 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts @@ -1,17 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * dts file for Xilinx ZynqMP zc1751-xm016-dc2 * - * (C) Copyright 2015, Xilinx, Inc. + * (C) Copyright 2015 - 2018, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> - * - * SPDX-License-Identifier: GPL-2.0+ */ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" / { model = "ZynqMP zc1751-xm016-dc2 RevA"; @@ -50,7 +49,6 @@ status = "okay"; }; -/* fpd_dma clk 667MHz, lpd_dma 500MHz */ &fpd_dma_chan1 { status = "okay"; }; @@ -180,15 +178,15 @@ &spi0 { status = "okay"; num-cs = <1>; - spi0_flash0: spi0_flash0@0 { - compatible = "m25p80"; + spi0_flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; + compatible = "sst,sst25wf080", "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; - spi0_flash0@0 { - label = "spi0_flash0"; + partition@0 { + label = "data"; reg = <0x0 0x100000>; }; }; @@ -197,15 +195,15 @@ &spi1 { status = "okay"; num-cs = <1>; - spi1_flash0: spi1_flash0@0 { - compatible = "mtd_dataflash"; + spi1_flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; + compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash"; spi-max-frequency = <20000000>; reg = <0>; - spi1_flash0@0 { - label = "spi1_flash0"; + partition@0 { + label = "data"; reg = <0x0 0x84000>; }; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts new file mode 100644 index 0000000000..d6a010355b --- /dev/null +++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts @@ -0,0 +1,210 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP zc1751-xm017-dc3 + * + * (C) Copyright 2016 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" + +/ { + model = "ZynqMP zc1751-xm017-dc3 RevA"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + gpio0 = &gpio; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + usb0 = &usb0; + usb1 = &usb1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@0 { /* VSC8211 */ + reg = <0>; + }; +}; + +&gpio { + status = "okay"; +}; + +/* just eeprom here */ +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u26: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + /* IRQ not connected */ + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +/* eeprom24c02 and SE98A temp chip pca9306 */ +&i2c1 { + status = "okay"; + clock-frequency = <400000>; +}; + +/* MT29F64G08AECDBJ4-6 */ +&nand0 { + status = "okay"; + arasan,has-mdma; + num-cs = <2>; + + partition@0 { /* for testing purpose */ + label = "nand-fsbl-uboot"; + reg = <0x0 0x0 0x400000>; + }; + partition@1 { /* for testing purpose */ + label = "nand-linux"; + reg = <0x0 0x400000 0x1400000>; + }; + partition@2 { /* for testing purpose */ + label = "nand-device-tree"; + reg = <0x0 0x1800000 0x400000>; + }; + partition@3 { /* for testing purpose */ + label = "nand-rootfs"; + reg = <0x0 0x1C00000 0x1400000>; + }; + partition@4 { /* for testing purpose */ + label = "nand-bitstream"; + reg = <0x0 0x3000000 0x400000>; + }; + partition@5 { /* for testing purpose */ + label = "nand-misc"; + reg = <0x0 0x3400000 0xFCC00000>; + }; + + partition@6 { /* for testing purpose */ + label = "nand1-fsbl-uboot"; + reg = <0x1 0x0 0x400000>; + }; + partition@7 { /* for testing purpose */ + label = "nand1-linux"; + reg = <0x1 0x400000 0x1400000>; + }; + partition@8 { /* for testing purpose */ + label = "nand1-device-tree"; + reg = <0x1 0x1800000 0x400000>; + }; + partition@9 { /* for testing purpose */ + label = "nand1-rootfs"; + reg = <0x1 0x1C00000 0x1400000>; + }; + partition@10 { /* for testing purpose */ + label = "nand1-bitstream"; + reg = <0x1 0x3000000 0x400000>; + }; + partition@11 { /* for testing purpose */ + label = "nand1-misc"; + reg = <0x1 0x3400000 0xFCC00000>; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA phy OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +&sdhci1 { /* emmc with some settings */ + status = "okay"; +}; + +/* main */ +&uart0 { + status = "okay"; +}; + +/* DB9 */ +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +/* ULPI SMSC USB3320 */ +&usb1 { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts index 648e3ba799..fb49b4fcb4 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts @@ -1,17 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * dts file for Xilinx ZynqMP zc1751-xm018-dc4 * - * (C) Copyright 2015 - 2016, Xilinx, Inc. + * (C) Copyright 2015 - 2018, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> - * - * SPDX-License-Identifier: GPL-2.0+ */ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" / { model = "ZynqMP zc1751-xm018-dc4"; @@ -52,7 +51,6 @@ status = "okay"; }; -/* fpd_dma clk 667MHz, lpd_dma 500MHz */ &fpd_dma_chan1 { status = "okay"; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts index f3020a5760..0632b18ccf 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts @@ -1,18 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * dts file for Xilinx ZynqMP zc1751-xm019-dc5 * - * (C) Copyright 2015, Xilinx, Inc. + * (C) Copyright 2015 - 2018, Xilinx, Inc. * * Siva Durga Prasad <siva.durga.paladugu@xilinx.com> * Michal Simek <michal.simek@xilinx.com> - * - * SPDX-License-Identifier: GPL-2.0+ */ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" / { model = "ZynqMP zc1751-xm019-dc5 RevA"; compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; @@ -38,7 +37,6 @@ }; }; -/* fpd_dma clk 667MHz, lpd_dma 500MHz */ &fpd_dma_chan1 { status = "okay"; }; @@ -84,18 +82,33 @@ status = "okay"; }; -/* FIXME: Add device */ &i2c0 { status = "okay"; }; -/* FIXME: Add device */ &i2c1 { status = "okay"; }; &sdhci0 { status = "okay"; + no-1-8-v; +}; + +&ttc0 { + status = "okay"; +}; + +&ttc1 { + status = "okay"; +}; + +&ttc2 { + status = "okay"; +}; + +&ttc3 { + status = "okay"; }; &uart0 { diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts new file mode 100644 index 0000000000..9114f98140 --- /dev/null +++ b/arch/arm/dts/zynqmp-zcu100-revC.dts @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU100 revC + * + * (C) Copyright 2016 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + * Nathalie Chan King Choy + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> + +/ { + model = "ZynqMP ZCU100 RevC"; + compatible = "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100", "xlnx,zynqmp"; + + aliases { + gpio0 = &gpio; + i2c0 = &i2c1; + rtc0 = &rtc; + serial0 = &uart1; + serial1 = &uart0; + serial2 = &dcc; + spi0 = &spi0; + spi1 = &spi1; + usb0 = &usb0; + usb1 = &usb1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw4 { + label = "sw4"; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + autorepeat; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&xilinx_ams 0>, <&xilinx_ams 1>, <&xilinx_ams 2>, + <&xilinx_ams 3>, <&xilinx_ams 4>, <&xilinx_ams 5>, + <&xilinx_ams 6>, <&xilinx_ams 7>, <&xilinx_ams 8>, + <&xilinx_ams 9>, <&xilinx_ams 10>, + <&xilinx_ams 11>, <&xilinx_ams 12>; + }; + + leds { + compatible = "gpio-leds"; + ds2 { + label = "ds2"; + gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + ds3 { + label = "ds3"; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; /* WLAN tx */ + default-state = "off"; + }; + + ds4 { + label = "ds4"; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0rx"; /* WLAN rx */ + default-state = "off"; + }; + + ds5 { + label = "ds5"; + gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + }; + + vbus_det { /* U5 USB5744 VBUS detection via MIO25 */ + label = "vbus_det"; + gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + ltc2954: ltc2954 { /* U7 */ + compatible = "lltc,ltc2954", "lltc,ltc2952"; + trigger-gpios = <&gpio 26 GPIO_ACTIVE_LOW>; /* INT line - input */ + /* If there is HW watchdog on mezzanine this signal should be connected there */ + watchdog-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; /* MIO on PAD */ + kill-gpios = <&gpio 34 GPIO_ACTIVE_LOW>; /* KILL signal - output */ + }; + + wmmcsdio_fixed: fixedregulator-mmcsdio { + compatible = "regulator-fixed"; + regulator-name = "wmmcsdio_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + sdio_pwrseq: sdio_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */ + }; +}; + +&dcc { + status = "okay"; +}; + +&gpio { + status = "okay"; + gpio-line-names = "UART1_TX", "UART1_RX", "UART0_RX", "UART0_TX", "I2C1_SCL", + "I2C1_SDA", "SPI1_SCLK", "WLAN_EN", "BT_EN", "SPI1_CS", + "SPI1_MISO", "SPI1_MOSI", "I2C_MUX_RESET", "SD0_DAT0", "SD0_DAT1", + "SD0_DAT2", "SD0_DAT3", "PS_LED3", "PS_LED2", "PS_LED1", + "PS_LED0", "SD0_CMD", "SD0_CLK", "GPIO_PB", "SD0_DETECT", + "VBUS_DET", "POWER_INT", "DP_AUX", "DP_HPD", "DP_OE", + "DP_AUX_IN", "INA226_ALERT", "PS_FP_PWR_EN", "PL_PWR_EN", "POWER_KILL", + "", "GPIO-A", "GPIO-B", "SPI0_SCLK", "GPIO-C", + "GPIO-D", "SPI0_CS", "SPI0_MISO", "SPI_MOSI", "GPIO-E", + "GPIO-F", "SD1_D0", "SD1_D1", "SD1_D2", "SD1_D3", + "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", + "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", + "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", + "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", + "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", + "USB_DATA7", "WLAN_IRQ", "PMIC_IRQ", /* MIO end and EMIO start */ + "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", ""; +}; + +&gpu { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; + i2c-mux@75 { /* u11 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2csw_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + label = "LS-I2C0"; + }; + i2csw_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + label = "LS-I2C1"; + }; + i2csw_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + label = "HS-I2C2"; + }; + i2csw_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + label = "HS-I2C3"; + }; + i2csw_4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + + pmic: pmic@5e { /* Custom TI PMIC u33 */ + compatible = "ti,tps65086"; + reg = <0x5e>; + interrupt-parent = <&gpio>; + interrupts = <77 GPIO_ACTIVE_LOW>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + i2csw_5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* PS_PMBUS */ + ina226@40 { /* u35 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <10000>; + /* MIO31 is alert which should be routed to PMUFW */ + }; + }; + i2csw_6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* + * Not Connected + */ + }; + i2csw_7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* + * usb5744 (DNP) - U5 + * 100kHz - this is default freq for us + */ + }; + }; +}; + +&rtc { + status = "okay"; +}; + +/* SD0 only supports 3.3V, no level shifter */ +&sdhci0 { + status = "okay"; + no-1-8-v; + broken-cd; /* CD has to be enabled by default */ + disable-wp; + xlnx,mio_bank = <0>; +}; + +&sdhci1 { + status = "okay"; + bus-width = <0x4>; + xlnx,mio_bank = <0>; + non-removable; + disable-wp; + cap-power-off-card; + mmc-pwrseq = <&sdio_pwrseq>; + vqmmc-supply = <&wmmcsdio_fixed>; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wifi@2 { + compatible = "ti,wl1831"; + reg = <2>; + interrupt-parent = <&gpio>; + interrupts = <76 IRQ_TYPE_EDGE_RISING>; /* MIO76 WLAN_IRQ 1V8 */ + }; +}; + +&serdes { + status = "okay"; +}; + +&spi0 { /* Low Speed connector */ + status = "okay"; + label = "LS-SPI0"; +}; + +&spi1 { /* High Speed connector */ + status = "okay"; + label = "HS-SPI1"; +}; + +&uart0 { + status = "okay"; + bluetooth { + compatible = "ti,wl1831-st"; + enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + }; + +}; + +&uart1 { + status = "okay"; + +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "peripheral"; + phy-names = "usb3-phy"; + phys = <&lane2 PHY_TYPE_USB3 0 0 26000000>; + maximum-speed = "super-speed"; +}; + +/* ULPI SMSC USB3320 */ +&usb1 { + status = "okay"; +}; + +&dwc3_1 { + status = "okay"; + dr_mode = "host"; + phy-names = "usb3-phy"; + phys = <&lane3 PHY_TYPE_USB3 1 0 26000000>; + maximum-speed = "super-speed"; +}; + +&watchdog0 { + status = "okay"; +}; + +&xilinx_ams { + status = "okay"; +}; + +&ams_ps { + status = "okay"; +}; diff --git a/arch/arm/dts/zynqmp-zcu102-rev1.0.dts b/arch/arm/dts/zynqmp-zcu102-rev1.0.dts index 323a674e3a..6647e97edb 100644 --- a/arch/arm/dts/zynqmp-zcu102-rev1.0.dts +++ b/arch/arm/dts/zynqmp-zcu102-rev1.0.dts @@ -1,11 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * dts file for Xilinx ZynqMP ZCU102 Rev1.0 * - * (C) Copyright 2016, Xilinx, Inc. + * (C) Copyright 2016 - 2018, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> - * - * SPDX-License-Identifier: GPL-2.0+ */ #include "zynqmp-zcu102-revB.dts" @@ -15,23 +14,23 @@ compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; }; -&eeprom { +&eeprom { #address-cells = <1>; #size-cells = <1>; - board_sn: board_sn@0 { + board_sn: board-sn@0 { reg = <0x0 0x14>; }; - eth_mac: eth_mac@20 { + eth_mac: eth-mac@20 { reg = <0x20 0x6>; }; - board_name: board_name@d0 { + board_name: board-name@d0 { reg = <0xd0 0x6>; }; - board_revision: board_revision@e0 { + board_revision: board-revision@e0 { reg = <0xe0 0x3>; }; }; diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts index 64a883b96e..b7c638bc9e 100644 --- a/arch/arm/dts/zynqmp-zcu102-revA.dts +++ b/arch/arm/dts/zynqmp-zcu102-revA.dts @@ -1,19 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * dts file for Xilinx ZynqMP ZCU102 RevA * - * (C) Copyright 2015, Xilinx, Inc. + * (C) Copyright 2015 - 2018, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> - * - * SPDX-License-Identifier: GPL-2.0+ */ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> #include <dt-bindings/phy/phy.h> / { @@ -52,7 +51,7 @@ sw19 { label = "sw19"; gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; - linux,code = <108>; /* down */ + linux,code = <KEY_DOWN>; gpio-key,wakeup; autorepeat; }; @@ -70,15 +69,12 @@ &can1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can1_default>; }; &dcc { status = "okay"; }; -/* fpd_dma clk 667MHz, lpd_dma 500MHz */ &fpd_dma_chan1 { status = "okay"; }; @@ -115,8 +111,6 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gem3_default>; phy0: phy@21 { reg = <21>; ti,rx-internal-delay = <0x8>; @@ -127,8 +121,6 @@ &gpio { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_default>; }; &gpu { @@ -138,19 +130,8 @@ &i2c0 { status = "okay"; clock-frequency = <400000>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c0_default>; - pinctrl-1 = <&pinctrl_i2c0_gpio>; - scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; tca6416_u97: gpio@20 { - /* - * Enable all GTs to out from U-Boot - * i2c mw 20 6 0 - setup IO to output - * i2c mw 20 2 ef - setup output values on pins 0-7 - * i2c mw 20 3 ff - setup output values on pins 10-17 - */ compatible = "ti,tca6416"; reg = <0x20>; gpio-controller; @@ -194,7 +175,7 @@ }; }; - tca6416_u61: gpio@21 { /* FIXME enable it by i2c mw 21 6 0 */ + tca6416_u61: gpio@21 { compatible = "ti,tca6416"; reg = <0x21>; gpio-controller; @@ -220,12 +201,12 @@ */ }; - i2cswitch@75 { /* u60 */ + i2c-mux@75 { /* u60 */ compatible = "nxp,pca9544"; #address-cells = <1>; #size-cells = <0>; reg = <0x75>; - i2c@0 { /* i2c mw 75 0 1 */ + i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; @@ -281,7 +262,7 @@ shunt-resistor = <5000>; }; }; - i2c@1 { /* i2c mw 75 0 1 */ + i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; @@ -327,97 +308,85 @@ shunt-resistor = <5000>; }; }; - i2c@2 { /* i2c mw 75 0 1 */ + i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; /* MAXIM_PMBUS - 00 */ max15301@a { /* u46 */ - compatible = "max15301"; + compatible = "maxim,max15301"; reg = <0xa>; }; max15303@b { /* u4 */ - compatible = "max15303"; + compatible = "maxim,max15303"; reg = <0xb>; }; max15303@10 { /* u13 */ - compatible = "max15303"; + compatible = "maxim,max15303"; reg = <0x10>; }; max15301@13 { /* u47 */ - compatible = "max15301"; + compatible = "maxim,max15301"; reg = <0x13>; }; max15303@14 { /* u7 */ - compatible = "max15303"; + compatible = "maxim,max15303"; reg = <0x14>; }; max15303@15 { /* u6 */ - compatible = "max15303"; + compatible = "maxim,max15303"; reg = <0x15>; }; max15303@16 { /* u10 */ - compatible = "max15303"; + compatible = "maxim,max15303"; reg = <0x16>; }; max15303@17 { /* u9 */ - compatible = "max15303"; + compatible = "maxim,max15303"; reg = <0x17>; }; max15301@18 { /* u63 */ - compatible = "max15301"; + compatible = "maxim,max15301"; reg = <0x18>; }; max15303@1a { /* u49 */ - compatible = "max15303"; + compatible = "maxim,max15303"; reg = <0x1a>; }; max15303@1d { /* u18 */ - compatible = "max15303"; + compatible = "maxim,max15303"; reg = <0x1d>; }; max15303@20 { /* u8 */ - compatible = "max15303"; + compatible = "maxim,max15303"; status = "disabled"; /* unreachable */ reg = <0x20>; }; -/* drivers/hwmon/pmbus/Kconfig:86: be called max20751. -drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o -*/ - max20751@72 { /* u95 FIXME - not detected */ - compatible = "max20751"; + max20751@72 { /* u95 */ + compatible = "maxim,max20751"; reg = <0x72>; }; - max20751@73 { /* u96 FIXME - not detected */ - compatible = "max20751"; + max20751@73 { /* u96 */ + compatible = "maxim,max20751"; reg = <0x73>; }; }; /* Bus 3 is not connected */ }; - - /* FIXME PMOD - j160 */ - /* FIXME MSP430F - u41 - not detected */ }; &i2c1 { status = "okay"; clock-frequency = <400000>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c1_default>; - pinctrl-1 = <&pinctrl_i2c1_gpio>; - scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; - - /* FIXME PL i2c via PCA9306 - u45 */ - /* FIXME MSP430 - u41 - not detected */ - i2cswitch@74 { /* u34 */ + + /* PL i2c via PCA9306 - u45 */ + i2c-mux@74 { /* u34 */ compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; reg = <0x74>; - i2c@0 { /* i2c mw 74 0 1 */ + i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; @@ -430,25 +399,25 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o * 768B - 1024B address 0x57 */ eeprom: eeprom@54 { /* u23 */ - compatible = "at,24c08"; + compatible = "atmel,24c08"; reg = <0x54>; }; }; - i2c@1 { /* i2c mw 74 0 2 */ + i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; - si5341: clock-generator1@36 { /* SI5341 - u69 */ - compatible = "si5341"; + si5341: clock-generator@36 { /* SI5341 - u69 */ + compatible = "silabs,si5341"; reg = <0x36>; }; }; - i2c@2 { /* i2c mw 74 0 4 */ + i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; - si570_1: clock-generator2@5d { /* USER SI570 - u42 */ + si570_1: clock-generator@5d { /* USER SI570 - u42 */ #clock-cells = <0>; compatible = "silabs,si570"; reg = <0x5d>; @@ -457,11 +426,11 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o clock-frequency = <300000000>; }; }; - i2c@3 { /* i2c mw 74 0 8 */ + i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; - si570_2: clock-generator3@5d { /* USER MGT SI570 - u56 */ + si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */ #clock-cells = <0>; compatible = "silabs,si570"; reg = <0x5d>; @@ -470,11 +439,11 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o clock-frequency = <148500000>; }; }; - i2c@4 { /* i2c mw 74 0 10 */ + i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; - si5328: clock-generator4@69 {/* SI5328 - u20 */ + si5328: clock-generator@69 {/* SI5328 - u20 */ compatible = "silabs,si5328"; reg = <0x69>; /* @@ -487,7 +456,7 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o /* 5 - 7 unconnected */ }; - i2cswitch@75 { + i2c-mux@75 { compatible = "nxp,pca9548"; /* u135 */ #address-cells = <1>; #size-cells = <0>; @@ -511,29 +480,24 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o reg = <2>; /* SYSMON */ }; - i2c@3 { /* i2c mw 75 0 8 */ + i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; /* DDR4 SODIMM */ - dev@19 { /* u-boot detection */ - compatible = "xxx"; + dev@19 { reg = <0x19>; }; - dev@30 { /* u-boot detection */ - compatible = "xxx"; + dev@30 { reg = <0x30>; }; - dev@35 { /* u-boot detection */ - compatible = "xxx"; + dev@35 { reg = <0x35>; }; - dev@36 { /* u-boot detection */ - compatible = "xxx"; + dev@36 { reg = <0x36>; }; - dev@51 { /* u-boot detection - maybe SPD */ - compatible = "xxx"; + dev@51 { reg = <0x51>; }; }; @@ -564,269 +528,6 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o }; }; -&pinctrl0 { - status = "okay"; - pinctrl_i2c0_default: i2c0-default { - mux { - groups = "i2c0_3_grp"; - function = "i2c0"; - }; - - conf { - groups = "i2c0_3_grp"; - bias-pull-up; - slew-rate = <SLEW_RATE_SLOW>; - io-standard = <IO_STANDARD_LVCMOS18>; - }; - }; - - pinctrl_i2c0_gpio: i2c0-gpio { - mux { - groups = "gpio0_14_grp", "gpio0_15_grp"; - function = "gpio0"; - }; - - conf { - groups = "gpio0_14_grp", "gpio0_15_grp"; - slew-rate = <SLEW_RATE_SLOW>; - io-standard = <IO_STANDARD_LVCMOS18>; - }; - }; - - pinctrl_i2c1_default: i2c1-default { - mux { - groups = "i2c1_4_grp"; - function = "i2c1"; - }; - - conf { - groups = "i2c1_4_grp"; - bias-pull-up; - slew-rate = <SLEW_RATE_SLOW>; - io-standard = <IO_STANDARD_LVCMOS18>; - }; - }; - - pinctrl_i2c1_gpio: i2c1-gpio { - mux { - groups = "gpio0_16_grp", "gpio0_17_grp"; - function = "gpio0"; - }; - - conf { - groups = "gpio0_16_grp", "gpio0_17_grp"; - slew-rate = <SLEW_RATE_SLOW>; - io-standard = <IO_STANDARD_LVCMOS18>; - }; - }; - - pinctrl_uart0_default: uart0-default { - mux { - groups = "uart0_4_grp"; - function = "uart0"; - }; - - conf { - groups = "uart0_4_grp"; - slew-rate = <SLEW_RATE_SLOW>; - io-standard = <IO_STANDARD_LVCMOS18>; - }; - - conf-rx { - pins = "MIO18"; - bias-high-impedance; - }; - - conf-tx { - pins = "MIO19"; - bias-disable; - }; - }; - - pinctrl_uart1_default: uart1-default { - mux { - groups = "uart1_5_grp"; - function = "uart1"; - }; - - conf { - groups = "uart1_5_grp"; - slew-rate = <SLEW_RATE_SLOW>; - io-standard = <IO_STANDARD_LVCMOS18>; - }; - - conf-rx { - pins = "MIO21"; - bias-high-impedance; - }; - - conf-tx { - pins = "MIO20"; - bias-disable; - }; - }; - - pinctrl_usb0_default: usb0-default { - mux { - groups = "usb0_0_grp"; - function = "usb0"; - }; - - conf { - groups = "usb0_0_grp"; - slew-rate = <SLEW_RATE_SLOW>; - io-standard = <IO_STANDARD_LVCMOS18>; - }; - - conf-rx { - pins = "MIO52", "MIO53", "MIO55"; - bias-high-impedance; - }; - - conf-tx { - pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", - "MIO60", "MIO61", "MIO62", "MIO63"; - bias-disable; - }; - }; - - pinctrl_gem3_default: gem3-default { - mux { - function = "ethernet3"; - groups = "ethernet3_0_grp"; - }; - - conf { - groups = "ethernet3_0_grp"; - slew-rate = <SLEW_RATE_SLOW>; - io-standard = <IO_STANDARD_LVCMOS18>; - }; - - conf-rx { - pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", - "MIO75"; - bias-high-impedance; - low-power-disable; - }; - - conf-tx { - pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", - "MIO69"; - bias-disable; - low-power-enable; - }; - - mux-mdio { - function = "mdio3"; - groups = "mdio3_0_grp"; - }; - - conf-mdio { - groups = "mdio3_0_grp"; - slew-rate = <SLEW_RATE_SLOW>; - io-standard = <IO_STANDARD_LVCMOS18>; - bias-disable; - }; - }; - - pinctrl_can1_default: can1-default { - mux { - function = "can1"; - groups = "can1_6_grp"; - }; - - conf { - groups = "can1_6_grp"; - slew-rate = <SLEW_RATE_SLOW>; - io-standard = <IO_STANDARD_LVCMOS18>; - }; - - conf-rx { - pins = "MIO25"; - bias-high-impedance; - }; - - conf-tx { - pins = "MIO24"; - bias-disable; - }; - }; - - pinctrl_sdhci1_default: sdhci1-default { - mux { - groups = "sdio1_0_grp"; - function = "sdio1"; - }; - - conf { - groups = "sdio1_0_grp"; - slew-rate = <SLEW_RATE_SLOW>; - io-standard = <IO_STANDARD_LVCMOS18>; - bias-disable; - }; - - mux-cd { - groups = "sdio1_0_cd_grp"; - function = "sdio1_cd"; - }; - - conf-cd { - groups = "sdio1_0_cd_grp"; - bias-high-impedance; - bias-pull-up; - slew-rate = <SLEW_RATE_SLOW>; - io-standard = <IO_STANDARD_LVCMOS18>; - }; - - mux-wp { - groups = "sdio1_0_wp_grp"; - function = "sdio1_wp"; - }; - - conf-wp { - groups = "sdio1_0_wp_grp"; - bias-high-impedance; - bias-pull-up; - slew-rate = <SLEW_RATE_SLOW>; - io-standard = <IO_STANDARD_LVCMOS18>; - }; - }; - - pinctrl_gpio_default: gpio-default { - mux-sw { - function = "gpio0"; - groups = "gpio0_22_grp", "gpio0_23_grp"; - }; - - conf-sw { - groups = "gpio0_22_grp", "gpio0_23_grp"; - slew-rate = <SLEW_RATE_SLOW>; - io-standard = <IO_STANDARD_LVCMOS18>; - }; - - mux-msp { - function = "gpio0"; - groups = "gpio0_13_grp", "gpio0_38_grp"; - }; - - conf-msp { - groups = "gpio0_13_grp", "gpio0_38_grp"; - slew-rate = <SLEW_RATE_SLOW>; - io-standard = <IO_STANDARD_LVCMOS18>; - }; - - conf-pull-up { - pins = "MIO22", "MIO23"; - bias-pull-up; - }; - - conf-pull-none { - pins = "MIO13", "MIO38"; - bias-disable; - }; - }; -}; - &pcie { status = "okay"; }; @@ -883,8 +584,6 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o /* SD1 with level shifter */ &sdhci1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sdhci1_default>; no-1-8-v; /* for 1.0 silicon */ xlnx,mio_bank = <1>; }; @@ -895,21 +594,15 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o &uart0 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb0_default>; }; &dwc3_0 { diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts index c771a946b2..af4d86882a 100644 --- a/arch/arm/dts/zynqmp-zcu102-revB.dts +++ b/arch/arm/dts/zynqmp-zcu102-revB.dts @@ -1,11 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * dts file for Xilinx ZynqMP ZCU102 RevB * - * (C) Copyright 2016, Xilinx, Inc. + * (C) Copyright 2016 - 2018, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> - * - * SPDX-License-Identifier: GPL-2.0+ */ #include "zynqmp-zcu102-revA.dts" @@ -27,14 +26,12 @@ /delete-node/ phy@21; }; -/* Different qspi 512Mbit version */ - /* Fix collision with u61 */ &i2c0 { - i2cswitch@75 { + i2c-mux@75 { i2c@2 { max15303@1b { /* u8 */ - compatible = "max15303"; + compatible = "maxim,max15303"; reg = <0x1b>; }; /delete-node/ max15303@20; diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts new file mode 100644 index 0000000000..a0e13d8dc5 --- /dev/null +++ b/arch/arm/dts/zynqmp-zcu104-revA.dts @@ -0,0 +1,265 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU104 + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> + +/ { + model = "ZynqMP ZCU104 RevA"; + compatible = "xlnx,zynqmp-zcu104-revA", "xlnx,zynqmp-zcu104", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + gpio0 = &gpio; + i2c0 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + spi0 = &qspi; + usb0 = &usb0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&can1 { + status = "okay"; +}; + +&dcc { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + /* Another connection to this bus via PL i2c via PCA9306 - u45 */ + i2c-mux@74 { /* u34 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom: eeprom@54 { /* u23 */ + compatible = "atmel,24c08"; + reg = <0x54>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */ + compatible = "idt,8t49n287"; + reg = <0x6c>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + irps5401_43: irps54012@43 { /* IRPS5401 - u175 */ + #clock-cells = <0>; + compatible = "infineon,irps5401"; + reg = <0x43>; + }; + irps5401_4d: irps54012@4d { /* IRPS5401 - u180 */ + #clock-cells = <0>; + compatible = "infineon,irps5401"; + reg = <0x4d>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + tca6416_u97: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - IRPS5401_ALERT_B + * 1 - HDMI_8T49N241_INT_ALM + * 2 - MAX6643_OT_B + * 3 - MAX6643_FANFAIL_B + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 7 - FMC_LPC_PRSNT_M2C_B + * 4, 10 - 17 - not connected + */ + }; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + + /* 3, 6 not connected */ + }; +}; + +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80"; /* n25q512a 128MiB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + partition@qspi-fsbl-uboot { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@qspi-linux { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@qspi-device-tree { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@qspi-rootfs { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5E0000>; + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&lane3 PHY_TYPE_SATA 1 1 125000000>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; + xlnx,mio_bank = <1>; + disable-wp; +}; + +&serdes { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + phy-names = "usb3-phy"; + phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>; + maximum-speed = "super-speed"; +}; + +&watchdog0 { + status = "okay"; +}; + +&xilinx_ams { + status = "okay"; +}; + +&ams_ps { + status = "okay"; +}; + +&ams_pl { + status = "okay"; +}; diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts new file mode 100644 index 0000000000..6e3cf5a97f --- /dev/null +++ b/arch/arm/dts/zynqmp-zcu104-revC.dts @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU104 + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> + +/ { + model = "ZynqMP ZCU104 RevC"; + compatible = "xlnx,zynqmp-zcu104-revC", "xlnx,zynqmp-zcu104", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + gpio0 = &gpio; + i2c0 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + spi0 = &qspi; + usb0 = &usb0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&can1 { + status = "okay"; +}; + +&dcc { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u97: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - IRPS5401_ALERT_B + * 1 - HDMI_8T49N241_INT_ALM + * 2 - MAX6643_OT_B + * 3 - MAX6643_FANFAIL_B + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 7 - FMC_LPC_PRSNT_M2C_B + * 4, 10 - 17 - not connected + */ + }; + + /* Another connection to this bus via PL i2c via PCA9306 - u45 */ + i2c-mux@74 { /* u34 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom: eeprom@54 { /* u23 */ + compatible = "atmel,24c08"; + reg = <0x54>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */ + compatible = "idt,8t49n287"; + reg = <0x6c>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + irps5401_43: irps54012@43 { /* IRPS5401 - u175 */ + #clock-cells = <0>; + compatible = "infineon,irps5401"; + reg = <0x43>; + }; + irps5401_4d: irps54012@4d { /* IRPS5401 - u180 */ + #clock-cells = <0>; + compatible = "infineon,irps5401"; + reg = <0x4d>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + + /* 3, 6 not connected */ + }; +}; + +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80"; /* n25q512a 128MiB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + partition@qspi-fsbl-uboot { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@qspi-linux { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@qspi-device-tree { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@qspi-rootfs { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5E0000>; + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&lane3 PHY_TYPE_SATA 1 1 125000000>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; + xlnx,mio_bank = <1>; + disable-wp; +}; + +&serdes { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + phy-names = "usb3-phy"; + phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>; + maximum-speed = "super-speed"; +}; + +&watchdog0 { + status = "okay"; +}; + +&xilinx_ams { + status = "okay"; +}; + +&ams_ps { + status = "okay"; +}; + +&ams_pl { + status = "okay"; +}; diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts new file mode 100644 index 0000000000..bbcd26031d --- /dev/null +++ b/arch/arm/dts/zynqmp-zcu106-revA.dts @@ -0,0 +1,596 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU106 + * + * (C) Copyright 2016, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> + +/ { + model = "ZynqMP ZCU106 RevA"; + compatible = "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + gpio0 = &gpio; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + spi0 = &qspi; + usb0 = &usb0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw19 { + label = "sw19"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_DOWN>; + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + heartbeat_led { + label = "heartbeat"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&can1 { + status = "okay"; +}; + +&dcc { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u97: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; /* interrupt not connected */ + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - SFP_SI5328_INT_ALM + * 1 - HDMI_SI5328_INT_ALM + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 10 - FMC_HPC0_PRSNT_M2C_B + * 11 - FMC_HPC1_PRSNT_M2C_B + * 2-4, 7, 12-17 - not connected + */ + }; + + tca6416_u61: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - VCCPSPLL_EN + * 1 - MGTRAVCC_EN + * 2 - MGTRAVTT_EN + * 3 - VCCPSDDRPLL_EN + * 4 - MIO26_PMU_INPUT_LS + * 5 - PL_PMBUS_ALERT + * 6 - PS_PMBUS_ALERT + * 7 - MAXIM_PMBUS_ALERT + * 10 - PL_DDR4_VTERM_EN + * 11 - PL_DDR4_VPP_2V5_EN + * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON + * 13 - PS_DIMM_SUSPEND_EN + * 14 - PS_DDR4_VTERM_EN + * 15 - PS_DDR4_VPP_2V5_EN + * 16 - 17 - not connected + */ + }; + + i2c-mux@75 { /* u60 */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* PS_PMBUS */ + ina226@40 { /* u76 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + ina226@41 { /* u77 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u78 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u87 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@44 { /* u85 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u86 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u93 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + ina226@47 { /* u88 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + ina226@4a { /* u15 */ + compatible = "ti,ina226"; + reg = <0x4a>; + shunt-resistor = <5000>; + }; + ina226@4b { /* u92 */ + compatible = "ti,ina226"; + reg = <0x4b>; + shunt-resistor = <5000>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* PL_PMBUS */ + ina226@40 { /* u79 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + ina226@41 { /* u81 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u80 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u84 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@44 { /* u16 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u65 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u74 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + ina226@47 { /* u75 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* MAXIM_PMBUS - 00 */ + max15301@a { /* u46 */ + compatible = "maxim,max15301"; + reg = <0xa>; + }; + max15303@b { /* u4 */ + compatible = "maxim,max15303"; + reg = <0xb>; + }; + max15303@10 { /* u13 */ + compatible = "maxim,max15303"; + reg = <0x10>; + }; + max15301@13 { /* u47 */ + compatible = "maxim,max15301"; + reg = <0x13>; + }; + max15303@14 { /* u7 */ + compatible = "maxim,max15303"; + reg = <0x14>; + }; + max15303@15 { /* u6 */ + compatible = "maxim,max15303"; + reg = <0x15>; + }; + max15303@16 { /* u10 */ + compatible = "maxim,max15303"; + reg = <0x16>; + }; + max15303@17 { /* u9 */ + compatible = "maxim,max15303"; + reg = <0x17>; + }; + max15301@18 { /* u63 */ + compatible = "maxim,max15301"; + reg = <0x18>; + }; + max15303@1a { /* u49 */ + compatible = "maxim,max15303"; + reg = <0x1a>; + }; + max15303@1b { /* u8 */ + compatible = "maxim,max15303"; + reg = <0x1b>; + }; + max15303@1d { /* u18 */ + compatible = "maxim,max15303"; + reg = <0x1d>; + }; + + max20751@72 { /* u95 */ + compatible = "maxim,max20751"; + reg = <0x72>; + }; + max20751@73 { /* u96 */ + compatible = "maxim,max20751"; + reg = <0x73>; + }; + }; + /* Bus 3 is not connected */ + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + /* PL i2c via PCA9306 - u45 */ + i2c-mux@74 { /* u34 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom: eeprom@54 { /* u23 */ + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + si5341: clock-generator@36 { /* SI5341 - u69 */ + compatible = "si5341"; + reg = <0x36>; + }; + + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_1: clock-generator@5d { /* USER SI570 - u42 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <300000000>; + clock-frequency = <300000000>; + }; + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; /* copy from zc702 */ + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si5328: clock-generator@69 {/* SI5328 - u20 */ + compatible = "silabs,si5328"; + reg = <0x69>; + }; + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; /* FAN controller */ + temp@4c {/* lm96163 - u128 */ + compatible = "national,lm96163"; + reg = <0x4c>; + }; + }; + /* 6 - 7 unconnected */ + }; + + i2c-mux@75 { + compatible = "nxp,pca9548"; /* u135 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* HPC0_IIC */ + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* HPC1_IIC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* SYSMON */ + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* DDR4 SODIMM */ + dev@19 { /* u-boot detection */ + compatible = "xxx"; + reg = <0x19>; + }; + dev@30 { /* u-boot detection */ + compatible = "xxx"; + reg = <0x30>; + }; + dev@35 { /* u-boot detection */ + compatible = "xxx"; + reg = <0x35>; + }; + dev@36 { /* u-boot detection */ + compatible = "xxx"; + reg = <0x36>; + }; + dev@51 { /* u-boot detection - maybe SPD */ + compatible = "xxx"; + reg = <0x51>; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* SEP 3 */ + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* SEP 2 */ + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* SEP 1 */ + }; + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* SEP 0 */ + }; + }; +}; + +&qspi { + status = "okay"; + is-dual = <1>; + flash@0 { + compatible = "m25p80"; /* 32MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + partition@qspi-fsbl-uboot { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@qspi-linux { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@qspi-device-tree { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@qspi-rootfs { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5E0000>; + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&lane3 PHY_TYPE_SATA 1 1 125000000>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; + xlnx,mio_bank = <1>; +}; + +&serdes { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + phy-names = "usb3-phy"; + phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts new file mode 100644 index 0000000000..4002d78806 --- /dev/null +++ b/arch/arm/dts/zynqmp-zcu111-revA.dts @@ -0,0 +1,525 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU111 + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> + +/ { + model = "ZynqMP ZCU111 RevA"; + compatible = "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + gpio0 = &gpio; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &dcc; + spi0 = &qspi; + usb0 = &usb0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + /* Another 4GB connected to PL */ + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw19 { + label = "sw19"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_DOWN>; + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + heartbeat_led { + label = "heartbeat"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&dcc { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u22: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; /* interrupt not connected */ + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - MAX6643_OT_B + * 1 - MAX6643_FANFAIL_B + * 2 - MIO26_PMU_INPUT_LS + * 4 - SFP_SI5382_INT_ALM + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 10 - FMCP_HSPC_PRSNT_M2C_B + * 11 - CLK_SPI_MUX_SEL0 + * 12 - CLK_SPI_MUX_SEL1 + * 16 - IRPS5401_ALERT_B + * 17 - INA226_PMBUS_ALERT + * 3, 7, 13-15 - not connected + */ + }; + + i2c-mux@75 { /* u23 */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* PS_PMBUS */ + /* PMBUS_ALERT done via pca9544 */ + ina226@40 { /* u67 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + ina226@41 { /* u59 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u61 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u60 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u64 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u69 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <2000>; + }; + ina226@47 { /* u66 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + ina226@48 { /* u65 */ + compatible = "ti,ina226"; + reg = <0x48>; + shunt-resistor = <5000>; + }; + ina226@49 { /* u63 */ + compatible = "ti,ina226"; + reg = <0x49>; + shunt-resistor = <5000>; + }; + ina226@4a { /* u3 */ + compatible = "ti,ina226"; + reg = <0x4a>; + shunt-resistor = <5000>; + }; + ina226@4b { /* u71 */ + compatible = "ti,ina226"; + reg = <0x4b>; + shunt-resistor = <5000>; + }; + ina226@4c { /* u77 */ + compatible = "ti,ina226"; + reg = <0x4c>; + shunt-resistor = <5000>; + }; + ina226@4d { /* u73 */ + compatible = "ti,ina226"; + reg = <0x4d>; + shunt-resistor = <5000>; + }; + ina226@4e { /* u79 */ + compatible = "ti,ina226"; + reg = <0x4e>; + shunt-resistor = <5000>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* NC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + irps5401_43: irps54012@43 { /* IRPS5401 - u53 check these */ + #clock-cells = <0>; + compatible = "infineon,irps5401"; + reg = <0x43>; + }; + irps5401_44: irps54012@44 { /* IRPS5401 - u55 */ + #clock-cells = <0>; + compatible = "infineon,irps5401"; + reg = <0x44>; + }; + irps5401_45: irps54012@45 { /* IRPS5401 - u57 */ + #clock-cells = <0>; + compatible = "infineon,irps5401"; + reg = <0x45>; + }; + /* u68 IR38064 +0 */ + /* u70 IR38060 +1 */ + /* u74 IR38060 +2 */ + /* u75 IR38060 +6 */ + /* J19 header too */ + + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* SYSMON */ + }; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + i2c-mux@74 { /* u26 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom: eeprom@54 { /* u88 */ + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + si5341: clock-generator@36 { /* SI5341 - u46 */ + compatible = "si5341"; + reg = <0x36>; + }; + + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_1: clock-generator@5d { /* USER SI570 - u47 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <300000000>; + clock-frequency = <300000000>; + }; + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_2: clock-generator@5d { /* USER MGT SI570 - u49 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si5328: clock-generator@69 { /* SI5328 - u48 */ + compatible = "silabs,si5328"; + reg = <0x69>; + }; + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + sc18is603@2f { /* sc18is602 - u93 */ + compatible = "nxp,sc18is603"; + reg = <0x2f>; + /* 4 gpios for CS not handled by driver */ + /* + * USB2ANY cable or + * LMK04208 - u90 or + * LMX2594 - u102 or + * LMX2594 - u103 or + * LMX2594 - u104 + */ + }; + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* FMC connector */ + }; + /* 7 NC */ + }; + + i2c-mux@75 { + compatible = "nxp,pca9548"; /* u27 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* FMCP_HSPC_IIC */ + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* NC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* SYSMON */ + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* DDR4 SODIMM */ + dev@19 { /* u-boot detection FIXME */ + compatible = "xxx"; + reg = <0x19>; + }; + dev@30 { /* u-boot detection */ + compatible = "xxx"; + reg = <0x30>; + }; + dev@35 { /* u-boot detection */ + compatible = "xxx"; + reg = <0x35>; + }; + dev@36 { /* u-boot detection */ + compatible = "xxx"; + reg = <0x36>; + }; + dev@51 { /* u-boot detection - maybe SPD */ + compatible = "xxx"; + reg = <0x51>; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* SFP3 */ + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* SFP2 */ + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* SFP1 */ + }; + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* SFP0 */ + }; + }; +}; + +&qspi { + status = "okay"; + is-dual = <1>; + flash@0 { + compatible = "m25p80"; /* 32MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + partition@qspi-fsbl-uboot { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@qspi-linux { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@qspi-device-tree { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@qspi-rootfs { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5E0000>; + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&lane3 PHY_TYPE_SATA 1 3 125000000>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; + xlnx,mio_bank = <1>; +}; + +&serdes { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + phy-names = "usb3-phy"; + phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>; +}; diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi index 5bdab61164..80ac9a6ac7 100644 --- a/arch/arm/dts/zynqmp.dtsi +++ b/arch/arm/dts/zynqmp.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * dts file for Xilinx ZynqMP * @@ -5,7 +6,10 @@ * * Michal Simek <michal.simek@xilinx.com> * - * SPDX-License-Identifier: GPL-2.0+ + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. */ / { @@ -98,155 +102,6 @@ u-boot,dm-pre-reloc; }; - power-domains { - compatible = "xlnx,zynqmp-genpd"; - - pd_usb0: pd-usb0 { - #power-domain-cells = <0x0>; - pd-id = <0x16>; - }; - - pd_usb1: pd-usb1 { - #power-domain-cells = <0x0>; - pd-id = <0x17>; - }; - - pd_sata: pd-sata { - #power-domain-cells = <0x0>; - pd-id = <0x1c>; - }; - - pd_spi0: pd-spi0 { - #power-domain-cells = <0x0>; - pd-id = <0x23>; - }; - - pd_spi1: pd-spi1 { - #power-domain-cells = <0x0>; - pd-id = <0x24>; - }; - - pd_uart0: pd-uart0 { - #power-domain-cells = <0x0>; - pd-id = <0x21>; - }; - - pd_uart1: pd-uart1 { - #power-domain-cells = <0x0>; - pd-id = <0x22>; - }; - - pd_eth0: pd-eth0 { - #power-domain-cells = <0x0>; - pd-id = <0x1d>; - }; - - pd_eth1: pd-eth1 { - #power-domain-cells = <0x0>; - pd-id = <0x1e>; - }; - - pd_eth2: pd-eth2 { - #power-domain-cells = <0x0>; - pd-id = <0x1f>; - }; - - pd_eth3: pd-eth3 { - #power-domain-cells = <0x0>; - pd-id = <0x20>; - }; - - pd_i2c0: pd-i2c0 { - #power-domain-cells = <0x0>; - pd-id = <0x25>; - }; - - pd_i2c1: pd-i2c1 { - #power-domain-cells = <0x0>; - pd-id = <0x26>; - }; - - pd_dp: pd-dp { - #power-domain-cells = <0x0>; - pd-id = <0x29>; - }; - - pd_gdma: pd-gdma { - #power-domain-cells = <0x0>; - pd-id = <0x2a>; - }; - - pd_adma: pd-adma { - #power-domain-cells = <0x0>; - pd-id = <0x2b>; - }; - - pd_ttc0: pd-ttc0 { - #power-domain-cells = <0x0>; - pd-id = <0x18>; - }; - - pd_ttc1: pd-ttc1 { - #power-domain-cells = <0x0>; - pd-id = <0x19>; - }; - - pd_ttc2: pd-ttc2 { - #power-domain-cells = <0x0>; - pd-id = <0x1a>; - }; - - pd_ttc3: pd-ttc3 { - #power-domain-cells = <0x0>; - pd-id = <0x1b>; - }; - - pd_sd0: pd-sd0 { - #power-domain-cells = <0x0>; - pd-id = <0x27>; - }; - - pd_sd1: pd-sd1 { - #power-domain-cells = <0x0>; - pd-id = <0x28>; - }; - - pd_nand: pd-nand { - #power-domain-cells = <0x0>; - pd-id = <0x2c>; - }; - - pd_qspi: pd-qspi { - #power-domain-cells = <0x0>; - pd-id = <0x2d>; - }; - - pd_gpio: pd-gpio { - #power-domain-cells = <0x0>; - pd-id = <0x2e>; - }; - - pd_can0: pd-can0 { - #power-domain-cells = <0x0>; - pd-id = <0x2f>; - }; - - pd_can1: pd-can1 { - #power-domain-cells = <0x0>; - pd-id = <0x30>; - }; - - pd_pcie: pd-pcie { - #power-domain-cells = <0x0>; - pd-id = <0x3b>; - }; - - pd_gpu: pd-gpu { - #power-domain-cells = <0x0>; - pd-id = <0x3a 0x14 0x15>; - }; - }; - pmu { compatible = "arm,armv8-pmuv3"; interrupt-parent = <&gic>; @@ -390,7 +245,6 @@ interrupt-parent = <&gic>; tx-fifo-depth = <0x40>; rx-fifo-depth = <0x40>; - power-domains = <&pd_can0>; }; can1: can@ff070000 { @@ -402,7 +256,6 @@ interrupt-parent = <&gic>; tx-fifo-depth = <0x40>; rx-fifo-depth = <0x40>; - power-domains = <&pd_can1>; }; cci: cci@fd6e0000 { @@ -435,7 +288,6 @@ xlnx,bus-width = <128>; #stream-id-cells = <1>; iommus = <&smmu 0x14e8>; - power-domains = <&pd_gdma>; }; fpd_dma_chan2: dma@fd510000 { @@ -448,7 +300,6 @@ xlnx,bus-width = <128>; #stream-id-cells = <1>; iommus = <&smmu 0x14e9>; - power-domains = <&pd_gdma>; }; fpd_dma_chan3: dma@fd520000 { @@ -461,7 +312,6 @@ xlnx,bus-width = <128>; #stream-id-cells = <1>; iommus = <&smmu 0x14ea>; - power-domains = <&pd_gdma>; }; fpd_dma_chan4: dma@fd530000 { @@ -474,7 +324,6 @@ xlnx,bus-width = <128>; #stream-id-cells = <1>; iommus = <&smmu 0x14eb>; - power-domains = <&pd_gdma>; }; fpd_dma_chan5: dma@fd540000 { @@ -487,7 +336,6 @@ xlnx,bus-width = <128>; #stream-id-cells = <1>; iommus = <&smmu 0x14ec>; - power-domains = <&pd_gdma>; }; fpd_dma_chan6: dma@fd550000 { @@ -500,7 +348,6 @@ xlnx,bus-width = <128>; #stream-id-cells = <1>; iommus = <&smmu 0x14ed>; - power-domains = <&pd_gdma>; }; fpd_dma_chan7: dma@fd560000 { @@ -513,7 +360,6 @@ xlnx,bus-width = <128>; #stream-id-cells = <1>; iommus = <&smmu 0x14ee>; - power-domains = <&pd_gdma>; }; fpd_dma_chan8: dma@fd570000 { @@ -526,7 +372,6 @@ xlnx,bus-width = <128>; #stream-id-cells = <1>; iommus = <&smmu 0x14ef>; - power-domains = <&pd_gdma>; }; gpu: gpu@fd4b0000 { @@ -537,7 +382,6 @@ interrupts = <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>; interrupt-names = "IRQGP", "IRQGPMMU", "IRQPP0", "IRQPPMMU0", "IRQPP1", "IRQPPMMU1"; clock-names = "gpu", "gpu_pp0", "gpu_pp1"; - power-domains = <&pd_gpu>; }; /* LPDDMA default allows only secured access. inorder to enable @@ -547,105 +391,97 @@ lpd_dma_chan1: dma@ffa80000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; - clock-names = "clk_main", "clk_apb"; reg = <0x0 0xffa80000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 77 4>; + clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; #stream-id-cells = <1>; iommus = <&smmu 0x868>; - power-domains = <&pd_adma>; }; lpd_dma_chan2: dma@ffa90000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; - clock-names = "clk_main", "clk_apb"; reg = <0x0 0xffa90000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 78 4>; + clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; #stream-id-cells = <1>; iommus = <&smmu 0x869>; - power-domains = <&pd_adma>; }; lpd_dma_chan3: dma@ffaa0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; - clock-names = "clk_main", "clk_apb"; reg = <0x0 0xffaa0000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 79 4>; + clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; #stream-id-cells = <1>; iommus = <&smmu 0x86a>; - power-domains = <&pd_adma>; }; lpd_dma_chan4: dma@ffab0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; - clock-names = "clk_main", "clk_apb"; reg = <0x0 0xffab0000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 80 4>; + clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; #stream-id-cells = <1>; iommus = <&smmu 0x86b>; - power-domains = <&pd_adma>; }; lpd_dma_chan5: dma@ffac0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; - clock-names = "clk_main", "clk_apb"; reg = <0x0 0xffac0000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 81 4>; + clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; #stream-id-cells = <1>; iommus = <&smmu 0x86c>; - power-domains = <&pd_adma>; }; lpd_dma_chan6: dma@ffad0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; - clock-names = "clk_main", "clk_apb"; reg = <0x0 0xffad0000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 82 4>; + clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; #stream-id-cells = <1>; iommus = <&smmu 0x86d>; - power-domains = <&pd_adma>; }; lpd_dma_chan7: dma@ffae0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; - clock-names = "clk_main", "clk_apb"; reg = <0x0 0xffae0000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 83 4>; + clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; #stream-id-cells = <1>; iommus = <&smmu 0x86e>; - power-domains = <&pd_adma>; }; lpd_dma_chan8: dma@ffaf0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; - clock-names = "clk_main", "clk_apb"; reg = <0x0 0xffaf0000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 84 4>; + clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; #stream-id-cells = <1>; iommus = <&smmu 0x86f>; - power-domains = <&pd_adma>; }; mc: memory-controller@fd070000 { @@ -666,7 +502,6 @@ #size-cells = <1>; #stream-id-cells = <1>; iommus = <&smmu 0x872>; - power-domains = <&pd_nand>; }; gem0: ethernet@ff0b0000 { @@ -680,7 +515,6 @@ #size-cells = <0>; #stream-id-cells = <1>; iommus = <&smmu 0x874>; - power-domains = <&pd_eth0>; }; gem1: ethernet@ff0c0000 { @@ -694,7 +528,6 @@ #size-cells = <0>; #stream-id-cells = <1>; iommus = <&smmu 0x875>; - power-domains = <&pd_eth1>; }; gem2: ethernet@ff0d0000 { @@ -708,7 +541,6 @@ #size-cells = <0>; #stream-id-cells = <1>; iommus = <&smmu 0x876>; - power-domains = <&pd_eth2>; }; gem3: ethernet@ff0e0000 { @@ -722,7 +554,6 @@ #size-cells = <0>; #stream-id-cells = <1>; iommus = <&smmu 0x877>; - power-domains = <&pd_eth3>; }; gpio: gpio@ff0a0000 { @@ -735,7 +566,6 @@ #interrupt-cells = <2>; reg = <0x0 0xff0a0000 0x0 0x1000>; gpio-controller; - power-domains = <&pd_gpio>; }; i2c0: i2c@ff020000 { @@ -746,7 +576,6 @@ reg = <0x0 0xff020000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; - power-domains = <&pd_i2c0>; }; i2c1: i2c@ff030000 { @@ -757,7 +586,6 @@ reg = <0x0 0xff030000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; - power-domains = <&pd_i2c1>; }; ocm: memory-controller@ff960000 { @@ -781,7 +609,8 @@ <0 116 4>, <0 115 4>, /* MSI_1 [63...32] */ <0 114 4>; /* MSI_0 [31...0] */ - interrupt-names = "misc","dummy","intx", "msi1", "msi0"; + interrupt-names = "misc", "dummy", "intx", + "msi1", "msi0"; msi-parent = <&pcie>; reg = <0x0 0xfd0e0000 0x0 0x1000>, <0x0 0xfd480000 0x0 0x1000>, @@ -795,7 +624,6 @@ <0x0 0x0 0x0 0x2 &pcie_intc 0x2>, <0x0 0x0 0x0 0x3 &pcie_intc 0x3>, <0x0 0x0 0x0 0x4 &pcie_intc 0x4>; - power-domains = <&pd_pcie>; pcie_intc: legacy-interrupt-controller { interrupt-controller; #address-cells = <0>; @@ -817,7 +645,6 @@ #size-cells = <0>; #stream-id-cells = <1>; iommus = <&smmu 0x873>; - power-domains = <&pd_qspi>; }; rtc: rtc@ffa60000 { @@ -867,7 +694,6 @@ reg = <0x0 0xfd0c0000 0x0 0x2000>; interrupt-parent = <&gic>; interrupts = <0 133 4>; - power-domains = <&pd_sata>; #stream-id-cells = <4>; iommus = <&smmu 0x4c0>, <&smmu 0x4c1>, <&smmu 0x4c2>, <&smmu 0x4c3>; @@ -885,7 +711,6 @@ xlnx,device_id = <0>; #stream-id-cells = <1>; iommus = <&smmu 0x870>; - power-domains = <&pd_sd0>; nvmem-cells = <&soc_revision>; nvmem-cell-names = "soc_revision"; }; @@ -901,7 +726,6 @@ xlnx,device_id = <1>; #stream-id-cells = <1>; iommus = <&smmu 0x871>; - power-domains = <&pd_sd1>; nvmem-cells = <&soc_revision>; nvmem-cell-names = "soc_revision"; }; @@ -935,7 +759,6 @@ clock-names = "ref_clk", "pclk"; #address-cells = <1>; #size-cells = <0>; - power-domains = <&pd_spi0>; }; spi1: spi@ff050000 { @@ -947,7 +770,6 @@ clock-names = "ref_clk", "pclk"; #address-cells = <1>; #size-cells = <0>; - power-domains = <&pd_spi1>; }; ttc0: timer@ff110000 { @@ -957,7 +779,6 @@ interrupts = <0 36 4>, <0 37 4>, <0 38 4>; reg = <0x0 0xff110000 0x0 0x1000>; timer-width = <32>; - power-domains = <&pd_ttc0>; }; ttc1: timer@ff120000 { @@ -967,7 +788,6 @@ interrupts = <0 39 4>, <0 40 4>, <0 41 4>; reg = <0x0 0xff120000 0x0 0x1000>; timer-width = <32>; - power-domains = <&pd_ttc1>; }; ttc2: timer@ff130000 { @@ -977,7 +797,6 @@ interrupts = <0 42 4>, <0 43 4>, <0 44 4>; reg = <0x0 0xff130000 0x0 0x1000>; timer-width = <32>; - power-domains = <&pd_ttc2>; }; ttc3: timer@ff140000 { @@ -987,7 +806,6 @@ interrupts = <0 45 4>, <0 46 4>, <0 47 4>; reg = <0x0 0xff140000 0x0 0x1000>; timer-width = <32>; - power-domains = <&pd_ttc3>; }; uart0: serial@ff000000 { @@ -998,7 +816,6 @@ interrupts = <0 21 4>; reg = <0x0 0xff000000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; - power-domains = <&pd_uart0>; }; uart1: serial@ff010000 { @@ -1009,7 +826,6 @@ interrupts = <0 22 4>; reg = <0x0 0xff010000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; - power-domains = <&pd_uart1>; }; usb0: usb0@ff9d0000 { @@ -1019,7 +835,6 @@ compatible = "xlnx,zynqmp-dwc3"; reg = <0x0 0xff9d0000 0x0 0x100>; clock-names = "bus_clk", "ref_clk"; - power-domains = <&pd_usb0>; ranges; nvmem-cells = <&soc_revision>; nvmem-cell-names = "soc_revision"; @@ -1045,7 +860,6 @@ compatible = "xlnx,zynqmp-dwc3"; reg = <0x0 0xff9e0000 0x0 0x100>; clock-names = "bus_clk", "ref_clk"; - power-domains = <&pd_usb1>; ranges; nvmem-cells = <&soc_revision>; nvmem-cell-names = "soc_revision"; @@ -1106,7 +920,6 @@ interrupts = <0 119 4>; interrupt-parent = <&gic>; clock-names = "aclk", "aud_clk"; - power-domains = <&pd_dp>; xlnx,dp-version = "v1.2"; xlnx,max-lanes = <2>; xlnx,max-link-rate = <540000>; @@ -1129,7 +942,6 @@ xlnx,output-fmt = "rgb"; xlnx,vid-fmt = "yuyv"; xlnx,gfx-fmt = "rgb565"; - power-domains = <&pd_dp>; }; xlnx_dpdma: dma@fd4c0000 { @@ -1139,7 +951,6 @@ interrupts = <0 122 4>; interrupt-parent = <&gic>; clock-names = "axi_clk"; - power-domains = <&pd_dp>; dma-channels = <6>; #dma-cells = <1>; dma-video0channel { |