1 files changed, 64 insertions, 0 deletions
diff --git a/arch/arm/include/asm/arch-stm32f7/rcc.h b/arch/arm/include/asm/arch-stm32f7/rcc.h
new file mode 100644
index 0000000000..8bfb7b6628
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f7/rcc.h
@@ -0,0 +1,64 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _STM32_RCC_H
+#define _STM32_RCC_H
+
+#define RCC_CR		0x00	/* clock control */
+#define RCC_PLLCFGR	0x04	/* PLL configuration */
+#define RCC_CFGR	0x08	/* clock configuration */
+#define RCC_CIR		0x0C	/* clock interrupt */
+#define RCC_AHB1RSTR	0x10	/* AHB1 peripheral reset */
+#define RCC_AHB2RSTR	0x14	/* AHB2 peripheral reset */
+#define RCC_AHB3RSTR	0x18	/* AHB3 peripheral reset */
+#define RCC_APB1RSTR	0x20	/* APB1 peripheral reset */
+#define RCC_APB2RSTR	0x24	/* APB2 peripheral reset */
+#define RCC_AHB1ENR	0x30	/* AHB1 peripheral clock enable */
+#define RCC_AHB2ENR	0x34	/* AHB2 peripheral clock enable */
+#define RCC_AHB3ENR	0x38	/* AHB3 peripheral clock enable */
+#define RCC_APB1ENR	0x40	/* APB1 peripheral clock enable */
+#define RCC_APB2ENR	0x44	/* APB2 peripheral clock enable */
+#define RCC_AHB1LPENR	0x50	/* periph clk enable in low pwr mode */
+#define RCC_AHB2LPENR	0x54	/* AHB2 periph clk enable in low pwr mode */
+#define RCC_AHB3LPENR	0x58	/* AHB3 periph clk enable in low pwr mode */
+#define RCC_APB1LPENR	0x60	/* APB1 periph clk enable in low pwr mode */
+#define RCC_APB2LPENR	0x64	/* APB2 periph clk enable in low pwr mode */
+#define RCC_BDCR	0x70	/* Backup domain control */
+#define RCC_CSR		0x74	/* clock control & status */
+#define RCC_SSCGR	0x80	/* spread spectrum clock generation */
+#define RCC_PLLI2SCFGR	0x84	/* PLLI2S configuration */
+#define RCC_PLLSAICFG	0x88	/* PLLSAI configuration */
+#define RCC_DCKCFG1	0x8C	/* dedicated clocks configuration register */
+#define RCC_DCKCFG2	0x90	/* dedicated clocks configuration register */
+
+#define RCC_APB1ENR_TIM2EN		(1 << 0)
+#define RCC_APB1ENR_PWREN		(1 << 28)
+
+/*
+ * RCC USART specific definitions
+ */
+#define RCC_ENR_USART1EN		(1 << 4)
+#define RCC_ENR_USART2EN		(1 << 17)
+#define RCC_ENR_USART3EN		(1 << 18)
+#define RCC_ENR_USART6EN		(1 <<  5)
+
+/*
+ * RCC GPIO specific definitions
+ */
+#define RCC_ENR_GPIO_A_EN		(1 << 0)
+#define RCC_ENR_GPIO_B_EN		(1 << 1)
+#define RCC_ENR_GPIO_C_EN		(1 << 2)
+#define RCC_ENR_GPIO_D_EN		(1 << 3)
+#define RCC_ENR_GPIO_E_EN		(1 << 4)
+#define RCC_ENR_GPIO_F_EN		(1 << 5)
+#define RCC_ENR_GPIO_G_EN		(1 << 6)
+#define RCC_ENR_GPIO_H_EN		(1 << 7)
+#define RCC_ENR_GPIO_I_EN		(1 << 8)
+#define RCC_ENR_GPIO_J_EN		(1 << 9)
+#define RCC_ENR_GPIO_K_EN		(1 << 10)
+
+#endif