diff options
Diffstat (limited to 'arch/arm/include/asm')
| -rw-r--r-- | arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h | 12 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-fsl-layerscape/soc.h | 7 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h | 16 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-imx8m/ddr.h | 6 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h | 6 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h | 15 | ||||
| -rw-r--r-- | arch/arm/include/asm/mach-imx/sys_proto.h | 7 | ||||
| -rw-r--r-- | arch/arm/include/asm/omap_gpio.h | 2 |
8 files changed, 55 insertions, 16 deletions
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index d46477d96e..299201b157 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -23,7 +23,13 @@ #define CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR (CONFIG_SYS_IMMR + 0x00300000) #define CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR (CONFIG_SYS_IMMR + 0x00310000) #define CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR (CONFIG_SYS_IMMR + 0x00370000) +#ifndef CONFIG_NXP_LSCH3_2 #define SYS_FSL_QSPI_ADDR (CONFIG_SYS_IMMR + 0x010c0000) +#else +#define SYS_NXP_FSPI_ADDR (CONFIG_SYS_IMMR + 0x010c0000) +#define SYS_NXP_FSPI_LUTKEY_BASE_ADDR 0x18 +#define SYS_NXP_FSPI_LUT_BASE_ADDR 0x200 +#endif #define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x01140000) #define FSL_ESDHC1_BASE_ADDR CONFIG_SYS_FSL_ESDHC_ADDR #define FSL_ESDHC2_BASE_ADDR (CONFIG_SYS_IMMR + 0x01150000) @@ -252,8 +258,14 @@ #define DCSR_USB_PHY_RX_OVRD_IN_HI 0x200C #define USB_PHY_RX_EQ_VAL_1 0x0000 #define USB_PHY_RX_EQ_VAL_2 0x0080 +#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A) || \ + defined(CONFIG_ARCH_LS1028A) #define USB_PHY_RX_EQ_VAL_3 0x0380 #define USB_PHY_RX_EQ_VAL_4 0x0b80 +#elif defined(CONFIG_ARCH_LX2160A) +#define USB_PHY_RX_EQ_VAL_3 0x0080 +#define USB_PHY_RX_EQ_VAL_4 0x0880 +#endif #define DCSR_USB_IOCR1 0x108004 #define DCSR_USB_PCSTXSWINGFULL 0x71 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h index 35719d747b..c62d414aac 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h @@ -140,6 +140,13 @@ void init_pfe_scfg_dcfg_regs(void); int qspi_ahb_init(void); #endif +#ifdef CONFIG_FSPI_AHB_EN_4BYTE +#define SYS_NXP_FSPI_LUTCR_LOCK 0x00000001 +#define SYS_NXP_FSPI_LUTCR_UNLOCK 0x00000002 +#define SYS_NXP_FSPI_LUTKEY 0x5AF05AF0 +int fspi_ahb_init(void); +#endif + void cpu_name(char *name); #ifdef CONFIG_SYS_FSL_ERRATUM_A009635 void erratum_a009635(void); diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h index 94ea99a349..4c54e3d3d5 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright 2015-2018 NXP + * Copyright 2015-2019 NXP * Copyright 2014 Freescale Semiconductor, Inc. * */ @@ -42,6 +42,10 @@ * -the MC is responsible for allocating and setting up 'isolation context * IDs (ICIDs) based on the allocated stream IDs for all DPAA2 devices. * + * - ECAM (integrated PCI) + * - U-Boot applies the value here to HW and does DT fix-up for both + * 'iommu-map' and 'msi-map' + * * On Chasis-3 SoCs stream IDs are programmed in AMQ registers (32-bits) for * each of the different bus masters. The relationship between * the AMQ registers and stream IDs is defined in the table below: @@ -83,14 +87,12 @@ /* PCI - programmed in PEXn_LUT */ #define FSL_PEX_STREAM_ID_START 7 -#ifdef CONFIG_ARCH_LX2160A -#define FSL_PEX_STREAM_ID_NUM (0x100) -#endif - #if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1028A) #define FSL_PEX_STREAM_ID_END 22 #elif defined(CONFIG_ARCH_LS1088A) #define FSL_PEX_STREAM_ID_END 18 +#elif defined(CONFIG_ARCH_LX2160A) +#define FSL_PEX_STREAM_ID_END (0x100) #endif @@ -98,6 +100,10 @@ #define FSL_DPAA2_STREAM_ID_START 23 #define FSL_DPAA2_STREAM_ID_END 63 +/* PCI IEPs, this overlaps DPAA2 but these two are exclusive at least for now */ +#define FSL_ECAM_STREAM_ID_START 32 +#define FSL_ECAM_STREAM_ID_END 63 + #define FSL_SEC_STREAM_ID 64 #define FSL_SEC_JR1_STREAM_ID 65 #define FSL_SEC_JR2_STREAM_ID 66 diff --git a/arch/arm/include/asm/arch-imx8m/ddr.h b/arch/arm/include/asm/arch-imx8m/ddr.h index 53d46256d8..7a2a2d8edc 100644 --- a/arch/arm/include/asm/arch-imx8m/ddr.h +++ b/arch/arm/include/asm/arch-imx8m/ddr.h @@ -703,14 +703,14 @@ struct dram_timing_info { extern struct dram_timing_info dram_timing; void ddr_load_train_firmware(enum fw_type type); -void ddr_init(struct dram_timing_info *timing_info); -void ddr_cfg_phy(struct dram_timing_info *timing_info); +int ddr_init(struct dram_timing_info *timing_info); +int ddr_cfg_phy(struct dram_timing_info *timing_info); void load_lpddr4_phy_pie(void); void ddrphy_trained_csr_save(struct dram_cfg_param *param, unsigned int num); void dram_config_save(struct dram_timing_info *info, unsigned long base); /* utils function for ddr phy training */ -void wait_ddrphy_training_complete(void); +int wait_ddrphy_training_complete(void); void ddrphy_init_set_dfi_clk(unsigned int drate); void ddrphy_init_read_msg_block(enum fw_type type); diff --git a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h index 6e9ffeb6d5..50fdc9cd03 100644 --- a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h +++ b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h @@ -24,8 +24,10 @@ struct mxs_clkctrl_regs { mxs_reg_32(hw_clkctrl_xbus) /* 0x40 */ mxs_reg_32(hw_clkctrl_xtal) /* 0x50 */ mxs_reg_32(hw_clkctrl_pix) /* 0x60 */ - mxs_reg_32(hw_clkctrl_ssp0) /* 0x70 */ - mxs_reg_32(hw_clkctrl_gpmi) /* 0x80 */ + uint32_t hw_clkctrl_ssp0; /* 0x70 */ + uint32_t reserved_ssp0[3]; /* 0x74-0x7c */ + uint32_t hw_clkctrl_gpmi; /* 0x80 */ + uint32_t reserved_gpmi[3]; /* 0x84-0x8c */ mxs_reg_32(hw_clkctrl_spdif) /* 0x90 */ mxs_reg_32(hw_clkctrl_emi) /* 0xa0 */ diff --git a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h index 01e0a7a053..caef9e4b1f 100644 --- a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h +++ b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h @@ -27,11 +27,16 @@ struct mxs_clkctrl_regs { mxs_reg_32(hw_clkctrl_hbus) /* 0x60 */ mxs_reg_32(hw_clkctrl_xbus) /* 0x70 */ mxs_reg_32(hw_clkctrl_xtal) /* 0x80 */ - mxs_reg_32(hw_clkctrl_ssp0) /* 0x90 */ - mxs_reg_32(hw_clkctrl_ssp1) /* 0xa0 */ - mxs_reg_32(hw_clkctrl_ssp2) /* 0xb0 */ - mxs_reg_32(hw_clkctrl_ssp3) /* 0xc0 */ - mxs_reg_32(hw_clkctrl_gpmi) /* 0xd0 */ + uint32_t hw_clkctrl_ssp0; /* 0x90 */ + uint32_t reserved_ssp0[3]; /* 0x94-0x9c */ + uint32_t hw_clkctrl_ssp1; /* 0xa0 */ + uint32_t reserved_ssp1[3]; /* 0xa4-0xac */ + uint32_t hw_clkctrl_ssp2; /* 0xb0 */ + uint32_t reserved_ssp2[3]; /* 0xb4-0xbc */ + uint32_t hw_clkctrl_ssp3; /* 0xc0 */ + uint32_t reserved_ssp3[3]; /* 0xc4-0xcc */ + uint32_t hw_clkctrl_gpmi; /* 0xd0 */ + uint32_t reserved_gpmi[3]; /* 0xd4-0xdc */ mxs_reg_32(hw_clkctrl_spdif) /* 0xe0 */ mxs_reg_32(hw_clkctrl_emi) /* 0xf0 */ mxs_reg_32(hw_clkctrl_saif0) /* 0x100 */ diff --git a/arch/arm/include/asm/mach-imx/sys_proto.h b/arch/arm/include/asm/mach-imx/sys_proto.h index c9b509e6a7..fff4800808 100644 --- a/arch/arm/include/asm/mach-imx/sys_proto.h +++ b/arch/arm/include/asm/mach-imx/sys_proto.h @@ -106,6 +106,13 @@ void gpr_init(void); #endif /* CONFIG_MX6 */ +/* address translation table */ +struct rproc_att { + u32 da; /* device address (From Cortex M4 view) */ + u32 sa; /* system bus address */ + u32 size; /* size of reg range */ +}; + #ifdef CONFIG_IMX8M struct rom_api { u16 ver; diff --git a/arch/arm/include/asm/omap_gpio.h b/arch/arm/include/asm/omap_gpio.h index 20268fa084..151afa8f44 100644 --- a/arch/arm/include/asm/omap_gpio.h +++ b/arch/arm/include/asm/omap_gpio.h @@ -22,7 +22,7 @@ #include <asm/arch/cpu.h> -#ifdef CONFIG_DM_GPIO +#if CONFIG_IS_ENABLED(DM_GPIO) /* Information about a GPIO bank */ struct omap_gpio_platdata { |