diff options
Diffstat (limited to 'arch/arm/mach-mvebu/include/mach/soc.h')
| -rw-r--r-- | arch/arm/mach-mvebu/include/mach/soc.h | 64 |
1 files changed, 53 insertions, 11 deletions
diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h index 22abde080e..b317940366 100644 --- a/arch/arm/mach-mvebu/include/mach/soc.h +++ b/arch/arm/mach-mvebu/include/mach/soc.h @@ -11,6 +11,8 @@ #ifndef _MVEBU_SOC_H #define _MVEBU_SOC_H +#define SOC_MV78230_ID 0x7823 +#define SOC_MV78260_ID 0x7826 #define SOC_MV78460_ID 0x7846 #define SOC_88F6810_ID 0x6810 #define SOC_88F6820_ID 0x6820 @@ -33,10 +35,11 @@ #define INTREG_BASE_ADDR_REG (INTREG_BASE + 0x20080) #if defined(CONFIG_SPL_BUILD) /* - * On A38x switching the regs base address without running from - * SDRAM doesn't seem to work. So let the SPL still use the - * default base address and switch to the new address in the - * main u-boot later. + * The SPL U-Boot version still runs with the default + * address for the internal registers, configured by + * the BootROM. Only the main U-Boot version uses the + * new internal register base address, that also is + * required for the Linux kernel. */ #define SOC_REGS_PHY_BASE 0xd0000000 #else @@ -47,10 +50,7 @@ #define MVEBU_SDRAM_SCRATCH (MVEBU_REGISTER(0x01504)) #define MVEBU_L2_CACHE_BASE (MVEBU_REGISTER(0x08000)) #define CONFIG_SYS_PL310_BASE MVEBU_L2_CACHE_BASE -#define MVEBU_SPI_BASE (MVEBU_REGISTER(0x10600)) #define MVEBU_TWSI_BASE (MVEBU_REGISTER(0x11000)) -#define MVEBU_UART0_BASE (MVEBU_REGISTER(0x12000)) -#define MVEBU_UART1_BASE (MVEBU_REGISTER(0x12100)) #define MVEBU_MPP_BASE (MVEBU_REGISTER(0x18000)) #define MVEBU_GPIO0_BASE (MVEBU_REGISTER(0x18100)) #define MVEBU_GPIO1_BASE (MVEBU_REGISTER(0x18140)) @@ -60,17 +60,14 @@ #define MVEBU_CPU_WIN_BASE (MVEBU_REGISTER(0x20000)) #define MVEBU_SDRAM_BASE (MVEBU_REGISTER(0x20180)) #define MVEBU_TIMER_BASE (MVEBU_REGISTER(0x20300)) -#define MVEBU_EGIGA2_BASE (MVEBU_REGISTER(0x30000)) -#define MVEBU_EGIGA3_BASE (MVEBU_REGISTER(0x34000)) #define MVEBU_REG_PCIE_BASE (MVEBU_REGISTER(0x40000)) #define MVEBU_AXP_USB_BASE (MVEBU_REGISTER(0x50000)) #define MVEBU_USB20_BASE (MVEBU_REGISTER(0x58000)) -#define MVEBU_EGIGA0_BASE (MVEBU_REGISTER(0x70000)) -#define MVEBU_EGIGA1_BASE (MVEBU_REGISTER(0x74000)) #define MVEBU_AXP_SATA_BASE (MVEBU_REGISTER(0xa0000)) #define MVEBU_SATA0_BASE (MVEBU_REGISTER(0xa8000)) #define MVEBU_NAND_BASE (MVEBU_REGISTER(0xd0000)) #define MVEBU_SDIO_BASE (MVEBU_REGISTER(0xd8000)) +#define MVEBU_LCD_BASE (MVEBU_REGISTER(0xe0000)) #define SOC_COHERENCY_FABRIC_CTRL_REG (MVEBU_REGISTER(0x20200)) #define MBUS_ERR_PROP_EN (1 << 8) @@ -101,4 +98,49 @@ #define MVCPU_WIN_ENABLE CPU_WIN_ENABLE #define MVCPU_WIN_DISABLE CPU_WIN_DISABLE +#define COMPHY_REFCLK_ALIGNMENT (MVEBU_REGISTER(0x182f8)) + +/* BootROM error register (also includes some status infos) */ +#define CONFIG_BOOTROM_ERR_REG (MVEBU_REGISTER(0x182d0)) +#define BOOTROM_ERR_MODE_OFFS 28 +#define BOOTROM_ERR_MODE_MASK (0xf << BOOTROM_ERR_MODE_OFFS) +#define BOOTROM_ERR_MODE_UART 0x6 + +#if defined(CONFIG_ARMADA_38X) +/* SAR values for Armada 38x */ +#define CONFIG_SAR_REG (MVEBU_REGISTER(0x18600)) + +#define SAR_CPU_FREQ_OFFS 10 +#define SAR_CPU_FREQ_MASK (0x1f << SAR_CPU_FREQ_OFFS) +#define SAR_BOOT_DEVICE_OFFS 4 +#define SAR_BOOT_DEVICE_MASK (0x1f << SAR_BOOT_DEVICE_OFFS) + +#define BOOT_DEV_SEL_OFFS 4 +#define BOOT_DEV_SEL_MASK (0x3f << BOOT_DEV_SEL_OFFS) + +#define BOOT_FROM_UART 0x28 +#define BOOT_FROM_SPI 0x32 +#define BOOT_FROM_MMC 0x30 +#define BOOT_FROM_MMC_ALT 0x31 +#else +/* SAR values for Armada XP */ +#define CONFIG_SAR_REG (MVEBU_REGISTER(0x18230)) +#define CONFIG_SAR2_REG (MVEBU_REGISTER(0x18234)) + +#define SAR_CPU_FREQ_OFFS 21 +#define SAR_CPU_FREQ_MASK (0x7 << SAR_CPU_FREQ_OFFS) +#define SAR_FFC_FREQ_OFFS 24 +#define SAR_FFC_FREQ_MASK (0xf << SAR_FFC_FREQ_OFFS) +#define SAR2_CPU_FREQ_OFFS 20 +#define SAR2_CPU_FREQ_MASK (0x1 << SAR2_CPU_FREQ_OFFS) +#define SAR_BOOT_DEVICE_OFFS 5 +#define SAR_BOOT_DEVICE_MASK (0xf << SAR_BOOT_DEVICE_OFFS) + +#define BOOT_DEV_SEL_OFFS 5 +#define BOOT_DEV_SEL_MASK (0xf << BOOT_DEV_SEL_OFFS) + +#define BOOT_FROM_UART 0x2 +#define BOOT_FROM_SPI 0x3 +#endif + #endif /* _MVEBU_SOC_H */ |