7 files changed, 0 insertions, 270 deletions
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
deleted file mode 100644
index ba72a4105d..0000000000
--- a/arch/arm/mach-nomadik/Kconfig
+++ /dev/null
@@ -1,17 +0,0 @@
-if ARCH_NOMADIK
-
-choice
-	prompt "Nomadik board select"
-	optional
-
-config NOMADIK_NHK8815
-	bool "ST 8815 Nomadik Hardware Kit"
-
-endchoice
-
-config SYS_SOC
-	default "nomadik"
-
-source "board/st/nhk8815/Kconfig"
-
-endif
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
deleted file mode 100644
index cdf1345d58..0000000000
--- a/arch/arm/mach-nomadik/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= timer.o gpio.o
-obj-y	+= reset.o
diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/mach-nomadik/gpio.c
deleted file mode 100644
index eff5b2b75e..0000000000
--- a/arch/arm/mach-nomadik/gpio.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * (C) Copyright 2009 Alessandro Rubini
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/gpio.h>
-
-static unsigned long gpio_base[4] = {
-	NOMADIK_GPIO0_BASE,
-	NOMADIK_GPIO1_BASE,
-	NOMADIK_GPIO2_BASE,
-	NOMADIK_GPIO3_BASE
-};
-
-enum gpio_registers {
-	GPIO_DAT =	0x00,		/* data register */
-	GPIO_DATS =	0x04,		/* data set */
-	GPIO_DATC =	0x08,		/* data clear */
-	GPIO_PDIS =	0x0c,		/* pull disable */
-	GPIO_DIR =	0x10,		/* direction */
-	GPIO_DIRS =	0x14,		/* direction set */
-	GPIO_DIRC =	0x18,		/* direction clear */
-	GPIO_AFSLA =	0x20,		/* alternate function select A */
-	GPIO_AFSLB =	0x24,		/* alternate function select B */
-};
-
-static inline unsigned long gpio_to_base(int gpio)
-{
-	return gpio_base[gpio / 32];
-}
-
-static inline u32 gpio_to_bit(int gpio)
-{
-	return 1 << (gpio & 0x1f);
-}
-
-void nmk_gpio_af(int gpio, int alternate_function)
-{
-	unsigned long base = gpio_to_base(gpio);
-	u32 bit = gpio_to_bit(gpio);
-	u32 afunc, bfunc;
-
-	/* alternate function is 0..3, with one bit per register */
-	afunc = readl(base + GPIO_AFSLA) & ~bit;
-	bfunc = readl(base + GPIO_AFSLB) & ~bit;
-	if (alternate_function & 1) afunc |= bit;
-	if (alternate_function & 2) bfunc |= bit;
-	writel(afunc, base + GPIO_AFSLA);
-	writel(bfunc, base + GPIO_AFSLB);
-}
-
-void nmk_gpio_dir(int gpio, int dir)
-{
-	unsigned long base = gpio_to_base(gpio);
-	u32 bit = gpio_to_bit(gpio);
-
-	if (dir)
-		writel(bit, base + GPIO_DIRS);
-	else
-		writel(bit, base + GPIO_DIRC);
-}
-
-void nmk_gpio_set(int gpio, int val)
-{
-	unsigned long base = gpio_to_base(gpio);
-	u32 bit = gpio_to_bit(gpio);
-
-	if (val)
-		writel(bit, base + GPIO_DATS);
-	else
-		writel(bit, base + GPIO_DATC);
-}
-
-int nmk_gpio_get(int gpio)
-{
-	unsigned long base = gpio_to_base(gpio);
-	u32 bit = gpio_to_bit(gpio);
-
-	return readl(base + GPIO_DAT) & bit;
-}
diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
deleted file mode 100644
index 311758ae1a..0000000000
--- a/arch/arm/mach-nomadik/include/mach/gpio.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * (C) Copyright 2009 Alessandro Rubini
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __NMK_GPIO_H__
-#define __NMK_GPIO_H__
-
-/*
- * These functions are called from the soft-i2c driver, but
- * are also used by board files to set output bits.
- */
-
-enum nmk_af { /* alternate function settings */
-	GPIO_GPIO = 0,
-	GPIO_ALT_A,
-	GPIO_ALT_B,
-	GPIO_ALT_C
-};
-
-extern void nmk_gpio_af(int gpio, int alternate_function);
-extern void nmk_gpio_dir(int gpio, int dir);
-extern void nmk_gpio_set(int gpio, int val);
-extern int nmk_gpio_get(int gpio);
-
-#endif /* __NMK_GPIO_H__ */
diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/mach-nomadik/include/mach/mtu.h
deleted file mode 100644
index f89f242247..0000000000
--- a/arch/arm/mach-nomadik/include/mach/mtu.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * (C) Copyright 2009 Alessandro Rubini
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __ASM_ARCH_MTU_H
-#define __ASM_ARCH_MTU_H
-
-/*
- * The MTU device hosts four different counters, with 4 set of
- * registers. These are register names.
- */
-
-#define MTU_IMSC	0x00	/* Interrupt mask set/clear */
-#define MTU_RIS		0x04	/* Raw interrupt status */
-#define MTU_MIS		0x08	/* Masked interrupt status */
-#define MTU_ICR		0x0C	/* Interrupt clear register */
-
-/* per-timer registers take 0..3 as argument */
-#define MTU_LR(x)	(0x10 + 0x10 * (x) + 0x00)	/* Load value */
-#define MTU_VAL(x)	(0x10 + 0x10 * (x) + 0x04)	/* Current value */
-#define MTU_CR(x)	(0x10 + 0x10 * (x) + 0x08)	/* Control reg */
-#define MTU_BGLR(x)	(0x10 + 0x10 * (x) + 0x0c)	/* At next overflow */
-
-/* bits for the control register */
-#define MTU_CRn_ENA		0x80
-#define MTU_CRn_PERIODIC	0x40	/* if 0 = free-running */
-#define MTU_CRn_PRESCALE_MASK	0x0c
-#define MTU_CRn_PRESCALE_1		0x00
-#define MTU_CRn_PRESCALE_16		0x04
-#define MTU_CRn_PRESCALE_256		0x08
-#define MTU_CRn_32BITS		0x02
-#define MTU_CRn_ONESHOT		0x01	/* if 0 = wraps reloading from BGLR*/
-
-/* Other registers are usual amba/primecell registers, currently not used */
-#define MTU_ITCR	0xff0
-#define MTU_ITOP	0xff4
-
-#define MTU_PERIPH_ID0	0xfe0
-#define MTU_PERIPH_ID1	0xfe4
-#define MTU_PERIPH_ID2	0xfe8
-#define MTU_PERIPH_ID3	0xfeC
-
-#define MTU_PCELL0	0xff0
-#define MTU_PCELL1	0xff4
-#define MTU_PCELL2	0xff8
-#define MTU_PCELL3	0xffC
-
-#endif /* __ASM_ARCH_MTU_H */
diff --git a/arch/arm/mach-nomadik/reset.S b/arch/arm/mach-nomadik/reset.S
deleted file mode 100644
index ec954726ae..0000000000
--- a/arch/arm/mach-nomadik/reset.S
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <config.h>
-/*
- * Processor reset for Nomadik
- */
-
-	.align 5
-.globl reset_cpu
-reset_cpu:
-	ldr	r0, =NOMADIK_SRC_BASE	/* System and Reset Controller */
-	ldr	r1, =0x1
-	str	r1, [r0, #0x18]
-
-_loop_forever:
-	b	_loop_forever
diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/mach-nomadik/timer.c
deleted file mode 100644
index 775d0b7488..0000000000
--- a/arch/arm/mach-nomadik/timer.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * (C) Copyright 2009 Alessandro Rubini
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/mtu.h>
-
-/*
- * The timer is a decrementer, we'll left it free running at 2.4MHz.
- * We have 2.4 ticks per microsecond and an overflow in almost 30min
- */
-#define TIMER_CLOCK		(24 * 100 * 1000)
-#define COUNT_TO_USEC(x)	((x) * 5 / 12)	/* overflows at 6min */
-#define USEC_TO_COUNT(x)	((x) * 12 / 5)	/* overflows at 6min */
-#define TICKS_PER_HZ		(TIMER_CLOCK / CONFIG_SYS_HZ)
-#define TICKS_TO_HZ(x)		((x) / TICKS_PER_HZ)
-
-/* macro to read the decrementing 32 bit timer as an increasing count */
-#define READ_TIMER() (0 - readl(CONFIG_SYS_TIMERBASE + MTU_VAL(0)))
-
-/* Configure a free-running, auto-wrap counter with no prescaler */
-int timer_init(void)
-{
-	ulong val;
-
-	writel(MTU_CRn_ENA | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS,
-	       CONFIG_SYS_TIMERBASE + MTU_CR(0));
-
-	/* Reset the timer */
-	writel(0, CONFIG_SYS_TIMERBASE + MTU_LR(0));
-	/*
-	 * The load-register isn't really immediate: it changes on clock
-	 * edges, so we must wait for our newly-written value to appear.
-	 * Since we might miss reading 0, wait for any change in value.
-	 */
-	val = READ_TIMER();
-	while (READ_TIMER() == val)
-		;
-
-	return 0;
-}
-
-/* Return how many HZ passed since "base" */
-ulong get_timer(ulong base)
-{
-	return  TICKS_TO_HZ(READ_TIMER()) - base;
-}
-
-/* Delay x useconds */
-void __udelay(unsigned long usec)
-{
-	ulong ini, end;
-
-	ini = READ_TIMER();
-	end = ini + USEC_TO_COUNT(usec);
-	while ((signed)(end - READ_TIMER()) > 0)
-		;
-}
-
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-ulong get_tbclk(void)
-{
-	return CONFIG_SYS_HZ;
-}