diff options
Diffstat (limited to 'arch/arm/mach-omap2/am33xx/clock_am33xx.c')
| -rw-r--r-- | arch/arm/mach-omap2/am33xx/clock_am33xx.c | 234 |
1 files changed, 234 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/am33xx/clock_am33xx.c b/arch/arm/mach-omap2/am33xx/clock_am33xx.c new file mode 100644 index 0000000000..7b841b2d55 --- /dev/null +++ b/arch/arm/mach-omap2/am33xx/clock_am33xx.c @@ -0,0 +1,234 @@ +/* + * clock_am33xx.c + * + * clocks for AM33XX based boards + * + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include <asm/arch/hardware.h> +#include <asm/io.h> + +#define OSC (V_OSCK/1000000) + +struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER; +struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP; +struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL; +struct cm_rtc *const cmrtc = (struct cm_rtc *)CM_RTC; + +const struct dpll_regs dpll_mpu_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x88, + .cm_idlest_dpll = CM_WKUP + 0x20, + .cm_clksel_dpll = CM_WKUP + 0x2C, + .cm_div_m2_dpll = CM_WKUP + 0xA8, +}; + +const struct dpll_regs dpll_core_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x90, + .cm_idlest_dpll = CM_WKUP + 0x5C, + .cm_clksel_dpll = CM_WKUP + 0x68, + .cm_div_m4_dpll = CM_WKUP + 0x80, + .cm_div_m5_dpll = CM_WKUP + 0x84, + .cm_div_m6_dpll = CM_WKUP + 0xD8, +}; + +const struct dpll_regs dpll_per_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x8C, + .cm_idlest_dpll = CM_WKUP + 0x70, + .cm_clksel_dpll = CM_WKUP + 0x9C, + .cm_div_m2_dpll = CM_WKUP + 0xAC, +}; + +const struct dpll_regs dpll_ddr_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x94, + .cm_idlest_dpll = CM_WKUP + 0x34, + .cm_clksel_dpll = CM_WKUP + 0x40, + .cm_div_m2_dpll = CM_WKUP + 0xA0, +}; + +struct dpll_params dpll_mpu_opp100 = { + CONFIG_SYS_MPUCLK, OSC-1, 1, -1, -1, -1, -1}; +const struct dpll_params dpll_core_opp100 = { + 1000, OSC-1, -1, -1, 10, 8, 4}; +const struct dpll_params dpll_mpu = { + MPUPLL_M_300, OSC-1, 1, -1, -1, -1, -1}; +const struct dpll_params dpll_core = { + 50, OSC-1, -1, -1, 1, 1, 1}; +const struct dpll_params dpll_per = { + 960, OSC-1, 5, -1, -1, -1, -1}; + +const struct dpll_params *get_dpll_mpu_params(void) +{ + return &dpll_mpu; +} + +const struct dpll_params *get_dpll_core_params(void) +{ + return &dpll_core; +} + +const struct dpll_params *get_dpll_per_params(void) +{ + return &dpll_per; +} + +void setup_clocks_for_console(void) +{ + clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, + CD_CLKCTRL_CLKTRCTRL_SW_WKUP << + CD_CLKCTRL_CLKTRCTRL_SHIFT); + + clrsetbits_le32(&cmper->l4hsclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, + CD_CLKCTRL_CLKTRCTRL_SW_WKUP << + CD_CLKCTRL_CLKTRCTRL_SHIFT); + + clrsetbits_le32(&cmwkup->wkup_uart0ctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + clrsetbits_le32(&cmper->uart1clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + clrsetbits_le32(&cmper->uart2clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + clrsetbits_le32(&cmper->uart3clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + clrsetbits_le32(&cmper->uart4clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + clrsetbits_le32(&cmper->uart5clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); +} + +void enable_basic_clocks(void) +{ + u32 *const clk_domains[] = { + &cmper->l3clkstctrl, + &cmper->l4fwclkstctrl, + &cmper->l3sclkstctrl, + &cmper->l4lsclkstctrl, + &cmwkup->wkclkstctrl, + &cmper->emiffwclkctrl, + &cmrtc->clkstctrl, + 0 + }; + + u32 *const clk_modules_explicit_en[] = { + &cmper->l3clkctrl, + &cmper->l4lsclkctrl, + &cmper->l4fwclkctrl, + &cmwkup->wkl4wkclkctrl, + &cmper->l3instrclkctrl, + &cmper->l4hsclkctrl, + &cmwkup->wkgpio0clkctrl, + &cmwkup->wkctrlclkctrl, + &cmper->timer2clkctrl, + &cmper->gpmcclkctrl, + &cmper->elmclkctrl, + &cmper->mmc0clkctrl, + &cmper->mmc1clkctrl, + &cmwkup->wkup_i2c0ctrl, + &cmper->gpio1clkctrl, + &cmper->gpio2clkctrl, + &cmper->gpio3clkctrl, + &cmper->i2c1clkctrl, + &cmper->cpgmac0clkctrl, + &cmper->spi0clkctrl, + &cmrtc->rtcclkctrl, + &cmper->usb0clkctrl, + &cmper->emiffwclkctrl, + &cmper->emifclkctrl, + 0 + }; + + do_enable_clocks(clk_domains, clk_modules_explicit_en, 1); + + /* Select the Master osc 24 MHZ as Timer2 clock source */ + writel(0x1, &cmdpll->clktimer2clk); +} + +/* + * Enable Spread Spectrum for the MPU by calculating the required + * values and setting the registers accordingly. + * @param permille The spreading in permille (10th of a percent) + */ +void set_mpu_spreadspectrum(int permille) +{ + u32 multiplier_m; + u32 predivider_n; + u32 cm_clksel_dpll_mpu; + u32 cm_clkmode_dpll_mpu; + u32 ref_clock; + u32 pll_bandwidth; + u32 mod_freq_divider; + u32 exponent; + u32 mantissa; + u32 delta_m_step; + + printf("Enabling Spread Spectrum of %d permille for MPU\n", + permille); + + /* Read PLL parameter m and n */ + cm_clksel_dpll_mpu = readl(&cmwkup->clkseldpllmpu); + multiplier_m = (cm_clksel_dpll_mpu >> 8) & 0x3FF; + predivider_n = cm_clksel_dpll_mpu & 0x7F; + + /* + * Calculate reference clock (clock after pre-divider), + * its max. PLL bandwidth, + * and resulting mod_freq_divider + */ + ref_clock = V_OSCK / (predivider_n + 1); + pll_bandwidth = ref_clock / 70; + mod_freq_divider = ref_clock / (4 * pll_bandwidth); + + /* Calculate Mantissa/Exponent */ + exponent = 0; + mantissa = mod_freq_divider; + while ((mantissa > 127) && (exponent < 7)) { + exponent++; + mantissa /= 2; + } + if (mantissa > 127) + mantissa = 127; + + mod_freq_divider = mantissa << exponent; + + /* + * Calculate Modulation steps + * As we use Downspread only, the spread is twice the value of + * permille, so Div2! + * As it takes the value in percent, divide by ten! + */ + delta_m_step = ((u32)((multiplier_m * permille) / 10 / 2)) << 18; + delta_m_step /= 100; + delta_m_step /= mod_freq_divider; + if (delta_m_step > 0xFFFFF) + delta_m_step = 0xFFFFF; + + /* Setup Spread Spectrum */ + writel(delta_m_step, &cmwkup->sscdeltamstepdllmpu); + writel((exponent << 8) | mantissa, &cmwkup->sscmodfreqdivdpllmpu); + cm_clkmode_dpll_mpu = readl(&cmwkup->clkmoddpllmpu); + /* clear all SSC flags */ + cm_clkmode_dpll_mpu &= ~(0xF << CM_CLKMODE_DPLL_SSC_EN_SHIFT); + /* enable SSC with Downspread only */ + cm_clkmode_dpll_mpu |= CM_CLKMODE_DPLL_SSC_EN_MASK | + CM_CLKMODE_DPLL_SSC_DOWNSPREAD_MASK; + writel(cm_clkmode_dpll_mpu, &cmwkup->clkmoddpllmpu); + while (!(readl(&cmwkup->clkmoddpllmpu) & 0x2000)) + ; +} |