1 files changed, 5 insertions, 45 deletions
diff --git a/arch/arm/mach-rockchip/rk322x-board-spl.c b/arch/arm/mach-rockchip/rk322x-board-spl.c
index 1e718f2694..888310efbe 100644
--- a/arch/arm/mach-rockchip/rk322x-board-spl.c
+++ b/arch/arm/mach-rockchip/rk322x-board-spl.c
@@ -9,55 +9,14 @@
 #include <ram.h>
 #include <spl.h>
 #include <asm/io.h>
-#include <asm/arch/bootrom.h>
-#include <asm/arch/cru_rk322x.h>
-#include <asm/arch/grf_rk322x.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/timer.h>
-#include <asm/arch/uart.h>
+#include <asm/arch-rockchip/bootrom.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/timer.h>
 
 u32 spl_boot_device(void)
 {
 	return BOOT_DEVICE_MMC1;
 }
-#define GRF_BASE	0x11000000
-#define SGRF_BASE	0x10140000
-
-#define DEBUG_UART_BASE	0x11030000
-
-void board_debug_uart_init(void)
-{
-	static struct rk322x_grf * const grf = (void *)GRF_BASE;
-	enum {
-		GPIO1B2_SHIFT		= 4,
-		GPIO1B2_MASK		= 3 << GPIO1B2_SHIFT,
-		GPIO1B2_GPIO            = 0,
-		GPIO1B2_UART1_SIN,
-		GPIO1B2_UART21_SIN,
-
-		GPIO1B1_SHIFT		= 2,
-		GPIO1B1_MASK		= 3 << GPIO1B1_SHIFT,
-		GPIO1B1_GPIO            = 0,
-		GPIO1B1_UART1_SOUT,
-		GPIO1B1_UART21_SOUT,
-	};
-	enum {
-		CON_IOMUX_UART2SEL_SHIFT= 8,
-		CON_IOMUX_UART2SEL_MASK	= 1 << CON_IOMUX_UART2SEL_SHIFT,
-		CON_IOMUX_UART2SEL_2	= 0,
-		CON_IOMUX_UART2SEL_21,
-	};
-
-	/* Enable early UART2 channel 1 on the RK322x */
-	rk_clrsetreg(&grf->gpio1b_iomux,
-		     GPIO1B1_MASK | GPIO1B2_MASK,
-		     GPIO1B2_UART21_SIN << GPIO1B2_SHIFT |
-		     GPIO1B1_UART21_SOUT << GPIO1B1_SHIFT);
-	/* Set channel C as UART2 input */
-	rk_clrsetreg(&grf->con_iomux,
-		     CON_IOMUX_UART2SEL_MASK,
-		     CON_IOMUX_UART2SEL_21 << CON_IOMUX_UART2SEL_SHIFT);
-}
 
 #define SGRF_DDR_CON0 0x10150000
 void board_init_f(ulong dummy)
@@ -65,6 +24,7 @@ void board_init_f(ulong dummy)
 	struct udevice *dev;
 	int ret;
 
+#ifdef CONFIG_DEBUG_UART
 	/*
 	 * Debug UART can be used from here if required:
 	 *
@@ -75,7 +35,7 @@ void board_init_f(ulong dummy)
 	 */
 	debug_uart_init();
 	printascii("SPL Init");
-
+#endif
 	ret = spl_early_init();
 	if (ret) {
 		debug("spl_early_init() failed: %d\n", ret);