diff options
Diffstat (limited to 'arch/arm/mach-stm32/stm32f7/clock.c')
| -rw-r--r-- | arch/arm/mach-stm32/stm32f7/clock.c | 231 |
1 files changed, 231 insertions, 0 deletions
diff --git a/arch/arm/mach-stm32/stm32f7/clock.c b/arch/arm/mach-stm32/stm32f7/clock.c index 17a715bac9..ac47850551 100644 --- a/arch/arm/mach-stm32/stm32f7/clock.c +++ b/arch/arm/mach-stm32/stm32f7/clock.c @@ -11,12 +11,243 @@ #include <asm/arch/stm32.h> #include <asm/arch/stm32_periph.h> +#define RCC_CR_HSION (1 << 0) +#define RCC_CR_HSEON (1 << 16) +#define RCC_CR_HSERDY (1 << 17) +#define RCC_CR_HSEBYP (1 << 18) +#define RCC_CR_CSSON (1 << 19) +#define RCC_CR_PLLON (1 << 24) +#define RCC_CR_PLLRDY (1 << 25) + +#define RCC_PLLCFGR_PLLM_MASK 0x3F +#define RCC_PLLCFGR_PLLN_MASK 0x7FC0 +#define RCC_PLLCFGR_PLLP_MASK 0x30000 +#define RCC_PLLCFGR_PLLQ_MASK 0xF000000 +#define RCC_PLLCFGR_PLLSRC (1 << 22) +#define RCC_PLLCFGR_PLLM_SHIFT 0 +#define RCC_PLLCFGR_PLLN_SHIFT 6 +#define RCC_PLLCFGR_PLLP_SHIFT 16 +#define RCC_PLLCFGR_PLLQ_SHIFT 24 + +#define RCC_CFGR_AHB_PSC_MASK 0xF0 +#define RCC_CFGR_APB1_PSC_MASK 0x1C00 +#define RCC_CFGR_APB2_PSC_MASK 0xE000 +#define RCC_CFGR_SW0 (1 << 0) +#define RCC_CFGR_SW1 (1 << 1) +#define RCC_CFGR_SW_MASK 0x3 +#define RCC_CFGR_SW_HSI 0 +#define RCC_CFGR_SW_HSE RCC_CFGR_SW0 +#define RCC_CFGR_SW_PLL RCC_CFGR_SW1 +#define RCC_CFGR_SWS0 (1 << 2) +#define RCC_CFGR_SWS1 (1 << 3) +#define RCC_CFGR_SWS_MASK 0xC +#define RCC_CFGR_SWS_HSI 0 +#define RCC_CFGR_SWS_HSE RCC_CFGR_SWS0 +#define RCC_CFGR_SWS_PLL RCC_CFGR_SWS1 +#define RCC_CFGR_HPRE_SHIFT 4 +#define RCC_CFGR_PPRE1_SHIFT 10 +#define RCC_CFGR_PPRE2_SHIFT 13 + +#define RCC_APB1ENR_PWREN (1 << 28) + +/* + * RCC USART specific definitions + */ +#define RCC_ENR_USART1EN (1 << 4) +#define RCC_ENR_USART2EN (1 << 17) +#define RCC_ENR_USART3EN (1 << 18) +#define RCC_ENR_USART6EN (1 << 5) + +/* + * Offsets of some PWR registers + */ +#define PWR_CR1_ODEN (1 << 16) +#define PWR_CR1_ODSWEN (1 << 17) +#define PWR_CSR1_ODRDY (1 << 16) +#define PWR_CSR1_ODSWRDY (1 << 17) + + +/* + * RCC GPIO specific definitions + */ +#define RCC_ENR_GPIO_A_EN (1 << 0) +#define RCC_ENR_GPIO_B_EN (1 << 1) +#define RCC_ENR_GPIO_C_EN (1 << 2) +#define RCC_ENR_GPIO_D_EN (1 << 3) +#define RCC_ENR_GPIO_E_EN (1 << 4) +#define RCC_ENR_GPIO_F_EN (1 << 5) +#define RCC_ENR_GPIO_G_EN (1 << 6) +#define RCC_ENR_GPIO_H_EN (1 << 7) +#define RCC_ENR_GPIO_I_EN (1 << 8) +#define RCC_ENR_GPIO_J_EN (1 << 9) +#define RCC_ENR_GPIO_K_EN (1 << 10) + +struct pll_psc { + u8 pll_m; + u16 pll_n; + u8 pll_p; + u8 pll_q; + u8 ahb_psc; + u8 apb1_psc; + u8 apb2_psc; +}; + +#define AHB_PSC_1 0 +#define AHB_PSC_2 0x8 +#define AHB_PSC_4 0x9 +#define AHB_PSC_8 0xA +#define AHB_PSC_16 0xB +#define AHB_PSC_64 0xC +#define AHB_PSC_128 0xD +#define AHB_PSC_256 0xE +#define AHB_PSC_512 0xF + +#define APB_PSC_1 0 +#define APB_PSC_2 0x4 +#define APB_PSC_4 0x5 +#define APB_PSC_8 0x6 +#define APB_PSC_16 0x7 + +#if !defined(CONFIG_STM32_HSE_HZ) +#error "CONFIG_STM32_HSE_HZ not defined!" +#else +#if (CONFIG_STM32_HSE_HZ == 25000000) +#if (CONFIG_SYS_CLK_FREQ == 200000000) +/* 200 MHz */ +struct pll_psc sys_pll_psc = { + .pll_m = 25, + .pll_n = 400, + .pll_p = 2, + .pll_q = 8, + .ahb_psc = AHB_PSC_1, + .apb1_psc = APB_PSC_4, + .apb2_psc = APB_PSC_2 +}; +#endif +#else +#error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists" +#endif +#endif + +int configure_clocks(void) +{ + /* Reset RCC configuration */ + setbits_le32(&STM32_RCC->cr, RCC_CR_HSION); + writel(0, &STM32_RCC->cfgr); /* Reset CFGR */ + clrbits_le32(&STM32_RCC->cr, (RCC_CR_HSEON | RCC_CR_CSSON + | RCC_CR_PLLON)); + writel(0x24003010, &STM32_RCC->pllcfgr); /* Reset value from RM */ + clrbits_le32(&STM32_RCC->cr, RCC_CR_HSEBYP); + writel(0, &STM32_RCC->cir); /* Disable all interrupts */ + + /* Configure for HSE+PLL operation */ + setbits_le32(&STM32_RCC->cr, RCC_CR_HSEON); + while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY)) + ; + + setbits_le32(&STM32_RCC->cfgr, (( + sys_pll_psc.ahb_psc << RCC_CFGR_HPRE_SHIFT) + | (sys_pll_psc.apb1_psc << RCC_CFGR_PPRE1_SHIFT) + | (sys_pll_psc.apb2_psc << RCC_CFGR_PPRE2_SHIFT))); + + /* Configure the main PLL */ + uint32_t pllcfgr = 0; + pllcfgr = RCC_PLLCFGR_PLLSRC; /* pll source HSE */ + pllcfgr |= sys_pll_psc.pll_m << RCC_PLLCFGR_PLLM_SHIFT; + pllcfgr |= sys_pll_psc.pll_n << RCC_PLLCFGR_PLLN_SHIFT; + pllcfgr |= ((sys_pll_psc.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT; + pllcfgr |= sys_pll_psc.pll_q << RCC_PLLCFGR_PLLQ_SHIFT; + writel(pllcfgr, &STM32_RCC->pllcfgr); + + /* Enable the main PLL */ + setbits_le32(&STM32_RCC->cr, RCC_CR_PLLON); + while (!(readl(&STM32_RCC->cr) & RCC_CR_PLLRDY)) + ; + + /* Enable high performance mode, System frequency up to 200 MHz */ + setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN); + setbits_le32(&STM32_PWR->cr1, PWR_CR1_ODEN); + /* Infinite wait! */ + while (!(readl(&STM32_PWR->csr1) & PWR_CSR1_ODRDY)) + ; + /* Enable the Over-drive switch */ + setbits_le32(&STM32_PWR->cr1, PWR_CR1_ODSWEN); + /* Infinite wait! */ + while (!(readl(&STM32_PWR->csr1) & PWR_CSR1_ODSWRDY)) + ; + + stm32_flash_latency_cfg(5); + clrbits_le32(&STM32_RCC->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1)); + setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_SW_PLL); + + while ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) != + RCC_CFGR_SWS_PLL) + ; + + return 0; +} + +unsigned long clock_get(enum clock clck) +{ + u32 sysclk = 0; + u32 shift = 0; + /* Prescaler table lookups for clock computation */ + u8 ahb_psc_table[16] = { + 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9 + }; + u8 apb_psc_table[8] = { + 0, 0, 0, 0, 1, 2, 3, 4 + }; + + if ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) == + RCC_CFGR_SWS_PLL) { + u16 pllm, plln, pllp; + pllm = (readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLM_MASK); + plln = ((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLN_MASK) + >> RCC_PLLCFGR_PLLN_SHIFT); + pllp = ((((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLP_MASK) + >> RCC_PLLCFGR_PLLP_SHIFT) + 1) << 1); + sysclk = ((CONFIG_STM32_HSE_HZ / pllm) * plln) / pllp; + } + + switch (clck) { + case CLOCK_CORE: + return sysclk; + break; + case CLOCK_AHB: + shift = ahb_psc_table[( + (readl(&STM32_RCC->cfgr) & RCC_CFGR_AHB_PSC_MASK) + >> RCC_CFGR_HPRE_SHIFT)]; + return sysclk >>= shift; + break; + case CLOCK_APB1: + shift = apb_psc_table[( + (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB1_PSC_MASK) + >> RCC_CFGR_PPRE1_SHIFT)]; + return sysclk >>= shift; + break; + case CLOCK_APB2: + shift = apb_psc_table[( + (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB2_PSC_MASK) + >> RCC_CFGR_PPRE2_SHIFT)]; + return sysclk >>= shift; + break; + default: + return 0; + break; + } +} + + void clock_setup(int peripheral) { switch (peripheral) { case USART1_CLOCK_CFG: setbits_le32(RCC_BASE + RCC_APB2ENR, RCC_ENR_USART1EN); break; + case USART6_CLOCK_CFG: + setbits_le32(RCC_BASE + RCC_APB2ENR, RCC_ENR_USART6EN); + break; case GPIO_A_CLOCK_CFG: setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_A_EN); break; |