diff options
Diffstat (limited to 'arch/arm/mach-sunxi/Kconfig')
| -rw-r--r-- | arch/arm/mach-sunxi/Kconfig | 37 |
1 files changed, 27 insertions, 10 deletions
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 678e33dd40..558363b52d 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -42,6 +42,12 @@ config DRAM_SUN9I Select this dram controller driver for Sun9i platforms, like A80. +config DRAM_SUN50I_H6 + bool + help + Select this dram controller driver for some sun50i platforms, + like H6. + config SUN6I_P2WI bool "Allwinner sun6i internal P2WI controller" help @@ -73,16 +79,16 @@ config SUN8I_RSB with various RSB based devices, such as AXP223, AXP8XX PMICs, and AC100/AC200 ICs. -config SUNXI_HIGH_SRAM - bool - default n +config SUNXI_SRAM_ADDRESS + hex + default 0x10000 if MACH_SUN9I || MACH_SUN50I || MACH_SUN50I_H5 + default 0x20000 if MACH_SUN50I_H6 + default 0x0 ---help--- Older Allwinner SoCs have their mask boot ROM mapped just below 4GB, with the first SRAM region being located at address 0. Some newer SoCs map the boot ROM at address 0 instead and move the - SRAM to 64KB, just behind the mask ROM. - Chips using the latter setup are supposed to select this option to - adjust the addresses accordingly. + SRAM to a different address. config SUNXI_A64_TIMER_ERRATUM bool @@ -257,7 +263,6 @@ config MACH_SUN9I select CPU_V7A select DRAM_SUN9I select SUN6I_PRCM - select SUNXI_HIGH_SRAM select SUNXI_GEN_SUN6I select SUN8I_RSB select SUPPORT_SPL @@ -269,7 +274,6 @@ config MACH_SUN50I select PHY_SUN4I_USB select SUNXI_DE2 select SUNXI_GEN_SUN6I - select SUNXI_HIGH_SRAM select SUPPORT_SPL select SUNXI_DRAM_DW select SUNXI_DRAM_DW_32BIT @@ -281,10 +285,17 @@ config MACH_SUN50I_H5 bool "sun50i (Allwinner H5)" select ARM64 select MACH_SUNXI_H3_H5 - select SUNXI_HIGH_SRAM select FIT select SPL_LOAD_FIT +config MACH_SUN50I_H6 + bool "sun50i (Allwinner H6)" + select ARM64 + select SUPPORT_SPL + select FIT + select SPL_LOAD_FIT + select DRAM_SUN50I_H6 + endchoice # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33" @@ -378,6 +389,7 @@ config DRAM_CLK default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || \ MACH_SUN8I_V3S default 672 if MACH_SUN50I + default 744 if MACH_SUN50I_H6 ---help--- Set the dram clock speed, valid range 240 - 480 (prior to sun9i), must be a multiple of 24. For the sun9i (A80), the tested values @@ -397,7 +409,7 @@ config DRAM_ZQ default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I default 127 if MACH_SUN7I default 14779 if MACH_SUN8I_V3S - default 3881979 if MACH_SUN8I_R40 + default 3881979 if MACH_SUN8I_R40 || MACH_SUN50I_H6 default 4145117 if MACH_SUN9I default 3881915 if MACH_SUN50I ---help--- @@ -409,6 +421,7 @@ config DRAM_ODT_EN default y if MACH_SUN8I_A23 default y if MACH_SUN8I_R40 default y if MACH_SUN50I + default y if MACH_SUN50I_H6 ---help--- Select this to enable dram odt (on die termination). @@ -499,6 +512,7 @@ config SYS_CLK_FREQ default 816000000 if MACH_SUN50I || MACH_SUN50I_H5 default 1008000000 if MACH_SUN8I default 1008000000 if MACH_SUN9I + default 888000000 if MACH_SUN50I_H6 config SYS_CONFIG_NAME default "sun4i" if MACH_SUN4I @@ -508,6 +522,7 @@ config SYS_CONFIG_NAME default "sun8i" if MACH_SUN8I default "sun9i" if MACH_SUN9I default "sun50i" if MACH_SUN50I + default "sun50i" if MACH_SUN50I_H6 config SYS_BOARD default "sunxi" @@ -713,6 +728,7 @@ config VIDEO_SUNXI depends on !MACH_SUN8I_V3S depends on !MACH_SUN9I depends on !MACH_SUN50I + depends on !MACH_SUN50I_H6 select VIDEO imply VIDEO_DT_SIMPLEFB default y @@ -945,6 +961,7 @@ config SPL_STACK_R_ADDR default 0x4fe00000 if MACH_SUN8I default 0x2fe00000 if MACH_SUN9I default 0x4fe00000 if MACH_SUN50I + default 0x4fe00000 if MACH_SUN50I_H6 config SPL_SPI_SUNXI bool "Support for SPI Flash on Allwinner SoCs in SPL" |