diff options
Diffstat (limited to 'arch/arm/mach-sunxi/dram_sun8i_h3.c')
| -rw-r--r-- | arch/arm/mach-sunxi/dram_sun8i_h3.c | 77 |
1 files changed, 50 insertions, 27 deletions
diff --git a/arch/arm/mach-sunxi/dram_sun8i_h3.c b/arch/arm/mach-sunxi/dram_sun8i_h3.c index 539268f1fb..4396754766 100644 --- a/arch/arm/mach-sunxi/dram_sun8i_h3.c +++ b/arch/arm/mach-sunxi/dram_sun8i_h3.c @@ -15,13 +15,24 @@ #include <asm/arch/dram.h> #include <linux/kconfig.h> +/* + * The delay parameters below allow to allegedly specify delay times of some + * unknown unit for each individual bit trace in each of the four data bytes + * the 32-bit wide access consists of. Also three control signals can be + * adjusted individually. + */ +#define BITS_PER_BYTE 8 +#define NR_OF_BYTE_LANES (32 / BITS_PER_BYTE) +/* The eight data lines (DQn) plus DM, DQS and DQSN */ +#define LINES_PER_BYTE_LANE (BITS_PER_BYTE + 3) struct dram_para { - u32 read_delays; - u32 write_delays; u16 page_size; u8 bus_width; u8 dual_rank; u8 row_bits; + const u8 dx_read_delays[NR_OF_BYTE_LANES][LINES_PER_BYTE_LANE]; + const u8 dx_write_delays[NR_OF_BYTE_LANES][LINES_PER_BYTE_LANE]; + const u8 ac_delays[31]; }; static inline int ns_to_t(int nanoseconds) @@ -64,34 +75,25 @@ static void mctl_phy_init(u32 val) mctl_await_completion(&mctl_ctl->pgsr[0], PGSR_INIT_DONE, 0x1); } -static void mctl_dq_delay(u32 read, u32 write) +static void mctl_set_bit_delays(struct dram_para *para) { struct sunxi_mctl_ctl_reg * const mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; int i, j; - u32 val; - - for (i = 0; i < 4; i++) { - val = DXBDLR_WRITE_DELAY((write >> (i * 4)) & 0xf) | - DXBDLR_READ_DELAY(((read >> (i * 4)) & 0xf) * 2); - - for (j = DXBDLR_DQ(0); j <= DXBDLR_DM; j++) - writel(val, &mctl_ctl->dx[i].bdlr[j]); - } clrbits_le32(&mctl_ctl->pgcr[0], 1 << 26); - for (i = 0; i < 4; i++) { - val = DXBDLR_WRITE_DELAY((write >> (16 + i * 4)) & 0xf) | - DXBDLR_READ_DELAY((read >> (16 + i * 4)) & 0xf); + for (i = 0; i < NR_OF_BYTE_LANES; i++) + for (j = 0; j < LINES_PER_BYTE_LANE; j++) + writel(DXBDLR_WRITE_DELAY(para->dx_write_delays[i][j]) | + DXBDLR_READ_DELAY(para->dx_read_delays[i][j]), + &mctl_ctl->dx[i].bdlr[j]); - writel(val, &mctl_ctl->dx[i].bdlr[DXBDLR_DQS]); - writel(val, &mctl_ctl->dx[i].bdlr[DXBDLR_DQSN]); - } + for (i = 0; i < 31; i++) + writel(ACBDLR_WRITE_DELAY(para->ac_delays[i]), + &mctl_ctl->acbdlr[i]); setbits_le32(&mctl_ctl->pgcr[0], 1 << 26); - - udelay(1); } enum { @@ -412,11 +414,8 @@ static int mctl_channel_init(struct dram_para *para) clrsetbits_le32(&mctl_ctl->dtcr, 0xf << 24, (para->dual_rank ? 0x3 : 0x1) << 24); - - if (para->read_delays || para->write_delays) { - mctl_dq_delay(para->read_delays, para->write_delays); - udelay(50); - } + mctl_set_bit_delays(para); + udelay(50); mctl_zq_calibration(para); @@ -490,6 +489,29 @@ static void mctl_auto_detect_dram_size(struct dram_para *para) break; } +/* + * The actual values used here are taken from Allwinner provided boot0 + * binaries, though they are probably board specific, so would likely benefit + * from invidual tuning for each board. Apparently a lot of boards copy from + * some Allwinner reference design, so we go with those generic values for now + * in the hope that they are reasonable for most (all?) boards. + */ +#define SUN8I_H3_DX_READ_DELAYS \ + {{ 18, 18, 18, 18, 18, 18, 18, 18, 18, 0, 0 }, \ + { 14, 14, 14, 14, 14, 14, 14, 14, 14, 0, 0 }, \ + { 18, 18, 18, 18, 18, 18, 18, 18, 18, 0, 0 }, \ + { 14, 14, 14, 14, 14, 14, 14, 14, 14, 0, 0 }} +#define SUN8I_H3_DX_WRITE_DELAYS \ + {{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 10, 10 }, \ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 10, 10 }, \ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 10, 10 }, \ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 6, 6 }} +#define SUN8I_H3_AC_DELAYS \ + { 0, 0, 0, 0, 0, 0, 0, 0, \ + 0, 0, 0, 0, 0, 0, 0, 0, \ + 0, 0, 0, 0, 0, 0, 0, 0, \ + 0, 0, 0, 0, 0, 0, 0 } + unsigned long sunxi_dram_init(void) { struct sunxi_mctl_com_reg * const mctl_com = @@ -498,12 +520,13 @@ unsigned long sunxi_dram_init(void) (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; struct dram_para para = { - .read_delays = 0x00007979, /* dram_tpr12 */ - .write_delays = 0x6aaa0000, /* dram_tpr11 */ .dual_rank = 0, .bus_width = 32, .row_bits = 15, .page_size = 4096, + .dx_read_delays = SUN8I_H3_DX_READ_DELAYS, + .dx_write_delays = SUN8I_H3_DX_WRITE_DELAYS, + .ac_delays = SUN8I_H3_AC_DELAYS, }; mctl_sys_init(¶); |