diff options
Diffstat (limited to 'arch/arm/mach-tegra/tegra210')
| -rw-r--r-- | arch/arm/mach-tegra/tegra210/Kconfig | 17 | ||||
| -rw-r--r-- | arch/arm/mach-tegra/tegra210/clock.c | 39 |
2 files changed, 53 insertions, 3 deletions
diff --git a/arch/arm/mach-tegra/tegra210/Kconfig b/arch/arm/mach-tegra/tegra210/Kconfig index 147e6a83d7..bd34db7117 100644 --- a/arch/arm/mach-tegra/tegra210/Kconfig +++ b/arch/arm/mach-tegra/tegra210/Kconfig @@ -3,6 +3,21 @@ if TEGRA210 choice prompt "Tegra210 board select" +config TARGET_E2220_1170 + bool "NVIDIA Tegra210 E2220-1170 board" + help + E2220-1170 is a Tegra210 bringup board with onboard SoC, DRAM, + eMMC, SD card slot, HDMI, USB micro-B port, and sockets for various + expansion modules. + +config TARGET_P2371_0000 + bool "NVIDIA Tegra210 P2371-0000 board" + help + P2371-0000 is a P2581 or P2530 CPU board married to a P2595 I/O + board. The combination contains SoC, DRAM, eMMC, SD card slot, + HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA, + a GPIO expansion header, and an analog audio jack. + config TARGET_P2571 bool "NVIDIA Tegra210 P2571 base board" help @@ -13,6 +28,8 @@ endchoice config SYS_SOC default "tegra210" +source "board/nvidia/e2220-1170/Kconfig" +source "board/nvidia/p2371-0000/Kconfig" source "board/nvidia/p2571/Kconfig" endif diff --git a/arch/arm/mach-tegra/tegra210/clock.c b/arch/arm/mach-tegra/tegra210/clock.c index 4e7d7932cc..a7b3a949fc 100644 --- a/arch/arm/mach-tegra/tegra210/clock.c +++ b/arch/arm/mach-tegra/tegra210/clock.c @@ -631,6 +631,34 @@ static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = { }; /* + * PLL divider shift/mask tables for all PLL IDs. + */ +struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT] = { + /* + * NOTE: If kcp_mask/kvco_mask == 0, they're not used in that PLL (PLLC, etc.) + * If lock_ena or lock_det are >31, they're not used in that PLL (PLLC, etc.) + */ + { .m_shift = 0, .m_mask = 0xFF, .n_shift = 10, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F, + .lock_ena = 32, .lock_det = 27, .kcp_shift = 0, .kcp_mask = 0, .kvco_shift = 0, .kvco_mask = 0 }, /* PLLC */ + { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F, + .lock_ena = 4, .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLM */ + { .m_shift = 0, .m_mask = 0xFF, .n_shift = 10, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F, + .lock_ena = 18, .lock_det = 27, .kcp_shift = 0, .kcp_mask = 3, .kvco_shift = 2, .kvco_mask = 1 }, /* PLLP */ + { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F, + .lock_ena = 28, .lock_det = 27, .kcp_shift = 25, .kcp_mask = 3, .kvco_shift = 24, .kvco_mask = 1 }, /* PLLA */ + { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 16, .p_mask = 0x1F, + .lock_ena = 29, .lock_det = 27, .kcp_shift = 25, .kcp_mask = 3, .kvco_shift = 24, .kvco_mask = 1 }, /* PLLU */ + { .m_shift = 0, .m_mask = 0xFF, .n_shift = 11, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x07, + .lock_ena = 18, .lock_det = 27, .kcp_shift = 23, .kcp_mask = 3, .kvco_shift = 22, .kvco_mask = 1 }, /* PLLD */ + { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F, + .lock_ena = 18, .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLX */ + { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 0, .p_mask = 0, + .lock_ena = 9, .lock_det = 11, .kcp_shift = 6, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLE */ + { .m_shift = 0, .m_mask = 0, .n_shift = 0, .n_mask = 0, .p_shift = 0, .p_mask = 0, + .lock_ena = 0, .lock_det = 0, .kcp_shift = 0, .kcp_mask = 0, .kvco_shift = 0, .kvco_mask = 0 }, /* PLLS (gone)*/ +}; + +/* * Get the oscillator frequency, from the corresponding hardware configuration * field. Note that Tegra30+ support 3 new higher freqs, but we map back * to the old T20 freqs. Support for the higher oscillators is TBD. @@ -649,8 +677,8 @@ enum clock_osc_freq clock_get_osc_freq(void) */ if (reg == 5) { debug("OSC_FREQ is 38.4MHz (%d) ...\n", reg); - /* Map it to 19.2MHz for now. 38.4MHz OSC support TBD */ - return 1; + /* Map it to the 5th CLOCK_OSC_ enum, i.e. 4 */ + return 4; } /* @@ -903,6 +931,7 @@ void clock_early_init(void) { struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + struct clk_pll_info *pllinfo = &tegra_pll_info_table[CLOCK_ID_DISPLAY]; u32 data; tegra210_setup_pllp(); @@ -930,6 +959,10 @@ void clock_early_init(void) clock_set_rate(CLOCK_ID_CGENERAL, 125, 4, 0, 0); clock_set_rate(CLOCK_ID_DISPLAY, 96, 2, 0, 12); break; + case CLOCK_OSC_FREQ_38_4: + clock_set_rate(CLOCK_ID_CGENERAL, 125, 8, 0, 0); + clock_set_rate(CLOCK_ID_DISPLAY, 96, 4, 0, 0); + break; default: /* * These are not supported. It is too early to print a @@ -953,7 +986,7 @@ void clock_early_init(void) udelay(2); /* PLLD_MISC: Set CLKENABLE and LOCK_DETECT bits */ - data = (1 << PLLD_ENABLE_CLK) | (1 << PLLD_EN_LCKDET); + data = (1 << PLLD_ENABLE_CLK) | (1 << pllinfo->lock_ena); writel(data, &clkrst->crc_pll[CLOCK_ID_DISPLAY].pll_misc); udelay(2); } |