diff options
Diffstat (limited to 'arch/arm/mach-uniphier/ph1-pro4')
-rw-r--r-- | arch/arm/mach-uniphier/ph1-pro4/Makefile | 16 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/ph1-pro4/boot-mode.c | 66 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c | 57 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c | 70 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c | 31 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S | 39 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/ph1-pro4/pinctrl.c | 59 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/ph1-pro4/platdevice.c | 15 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/ph1-pro4/pll_init.c | 151 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c | 18 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/ph1-pro4/sbc_init.c | 43 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c | 43 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/ph1-pro4/sg_init.c | 19 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/ph1-pro4/umc_init.c | 157 |
14 files changed, 784 insertions, 0 deletions
diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile new file mode 100644 index 0000000000..b88525c82d --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/Makefile @@ -0,0 +1,16 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o +obj-y += sg_init.o pll_init.o early_clkrst_init.o \ + pll_spectrum.o umc_init.o ddrphy_init.o +obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o +obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o +else +obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o +endif + +obj-y += boot-mode.o diff --git a/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c b/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c new file mode 100644 index 0000000000..9894c1a9c0 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <mach/boot-device.h> +#include <mach/sg-regs.h> +#include <mach/sbc-regs.h> + +struct boot_device_info boot_device_table[] = { + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize 1MB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize 1MB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_MMC1, "eMMC Boot (3.3V)"}, + {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + { /* sentinel */ } +}; + +int get_boot_mode_sel(void) +{ + return (readl(SG_PINMON0) >> 1) & 0x1f; +} + +u32 spl_boot_device(void) +{ + int boot_mode; + + if (boot_is_swapped()) + return BOOT_DEVICE_NOR; + + boot_mode = get_boot_mode_sel(); + + return boot_device_table[boot_mode].type; +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c b/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c new file mode 100644 index 0000000000..054efa6537 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2011-2015 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/io.h> +#include <mach/sc-regs.h> + +void clkrst_init(void) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_USB3C0 | + SC_RSTCTRL_NRST_GIO; +#endif +#ifdef CONFIG_UNIPHIER_ETH + tmp |= SC_RSTCTRL_NRST_ETHER; +#endif +#ifdef CONFIG_USB_EHCI_UNIPHIER + tmp |= SC_RSTCTRL_NRST_STDMAC; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_RSTCTRL_NRST_NAND; +#endif + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp = readl(SC_RSTCTRL2); + tmp |= SC_RSTCTRL2_NRST_USB3B1 | SC_RSTCTRL2_NRST_USB3C1; + writel(tmp, SC_RSTCTRL2); + readl(SC_RSTCTRL2); /* dummy read */ +#endif + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 | + SC_CLKCTRL_CEN_GIO; +#endif +#ifdef CONFIG_UNIPHIER_ETH + tmp |= SC_CLKCTRL_CEN_ETHER; +#endif +#ifdef CONFIG_USB_EHCI_UNIPHIER + tmp |= SC_CLKCTRL_CEN_MIO | SC_CLKCTRL_CEN_STDMAC; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_CLKCTRL_CEN_NAND; +#endif + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c b/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c new file mode 100644 index 0000000000..7df5aea0f3 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/types.h> +#include <asm/io.h> +#include <mach/ddrphy-regs.h> + +void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) +{ + u32 tmp; + + writel(0x0300c473, &phy->pgcr[1]); + if (freq == 1333) { + writel(0x0a806844, &phy->ptr[0]); + writel(0x208e0124, &phy->ptr[1]); + } else { + writel(0x0c807d04, &phy->ptr[0]); + writel(0x2710015E, &phy->ptr[1]); + } + writel(0x00083DEF, &phy->ptr[2]); + if (freq == 1333) { + writel(0x0f051616, &phy->ptr[3]); + writel(0x06ae08d6, &phy->ptr[4]); + } else { + writel(0x12061A80, &phy->ptr[3]); + writel(0x08027100, &phy->ptr[4]); + } + writel(0xF004001A, &phy->dsgcr); + + /* change the value of the on-die pull-up/pull-down registors */ + tmp = readl(&phy->dxccr); + tmp &= ~0x0ee0; + tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; + writel(tmp, &phy->dxccr); + + writel(0x0000040B, &phy->dcr); + if (freq == 1333) { + writel(0x85589955, &phy->dtpr[0]); + if (size == 1) + writel(0x1a8363c0, &phy->dtpr[1]); + else + writel(0x1a8363c0, &phy->dtpr[1]); + writel(0x5002c200, &phy->dtpr[2]); + writel(0x00000b51, &phy->mr0); + } else { + writel(0x999cbb66, &phy->dtpr[0]); + if (size == 1) + writel(0x1a878400, &phy->dtpr[1]); + else + writel(0x1a878400, &phy->dtpr[1]); + writel(0xa00214f8, &phy->dtpr[2]); + writel(0x00000d71, &phy->mr0); + } + writel(0x00000006, &phy->mr1); + if (freq == 1333) + writel(0x00000290, &phy->mr2); + else + writel(0x00000298, &phy->mr2); + + writel(0x00000000, &phy->mr3); + + while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) + ; + + writel(0x0300C473, &phy->pgcr[1]); + writel(0x0000005D, &phy->zq[0].cr[1]); +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c new file mode 100644 index 0000000000..37bb79e25a --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2011-2015 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <mach/sc-regs.h> + +void early_clkrst_init(void) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); + + tmp |= SC_RSTCTRL_NRST_UMC1 | SC_RSTCTRL_NRST_UMC0; + if (spl_boot_device() != BOOT_DEVICE_NAND) + tmp &= ~SC_RSTCTRL_NRST_NAND; + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CEN_UMC | SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI; + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S new file mode 100644 index 0000000000..fcaf6d12d8 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S @@ -0,0 +1,39 @@ +/* + * On-chip UART initializaion for low-level debugging + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/linkage.h> +#include <mach/sc-regs.h> +#include <mach/sg-regs.h> + +#define UART_CLK 73728000 +#include <mach/debug-uart.S> + +ENTRY(setup_lowlevel_debug) + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + init_debug_uart r0, r1, r2 + + /* UART Port 0 */ + set_pinsel 127, 0, r0, r1 + set_pinsel 128, 0, r0, r1 + + ldr r0, =SG_LOADPINCTRL + mov r1, #1 + str r1, [r0] + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + mov pc, lr +ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c b/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c new file mode 100644 index 0000000000..f382ef4842 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <mach/sg-regs.h> + +void pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_UNIPHIER_SERIAL + sg_set_pinsel(127, 0); /* RXD0 -> RXD0 */ + sg_set_pinsel(128, 0); /* TXD0 -> TXD0 */ + sg_set_pinsel(129, 0); /* RXD1 -> RXD1 */ + sg_set_pinsel(130, 0); /* TXD1 -> TXD1 */ + sg_set_pinsel(131, 0); /* RXD2 -> RXD2 */ + sg_set_pinsel(132, 0); /* TXD2 -> TXD2 */ + sg_set_pinsel(88, 2); /* CH6CLK -> RXD3 */ + sg_set_pinsel(89, 2); /* CH6VAL -> TXD3 */ +#endif + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(40, 0); /* NFD0 -> NFD0 */ + sg_set_pinsel(41, 0); /* NFD1 -> NFD1 */ + sg_set_pinsel(42, 0); /* NFD2 -> NFD2 */ + sg_set_pinsel(43, 0); /* NFD3 -> NFD3 */ + sg_set_pinsel(44, 0); /* NFD4 -> NFD4 */ + sg_set_pinsel(45, 0); /* NFD5 -> NFD5 */ + sg_set_pinsel(46, 0); /* NFD6 -> NFD6 */ + sg_set_pinsel(47, 0); /* NFD7 -> NFD7 */ + sg_set_pinsel(48, 0); /* NFALE -> NFALE */ + sg_set_pinsel(49, 0); /* NFCLE -> NFCLE */ + sg_set_pinsel(50, 0); /* XNFRE -> XNFRE */ + sg_set_pinsel(51, 0); /* XNFWE -> XNFWE */ + sg_set_pinsel(52, 0); /* XNFWP -> XNFWP */ + sg_set_pinsel(53, 0); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(54, 0); /* NRYBY0 -> NRYBY0 */ +#endif + +#ifdef CONFIG_USB_XHCI_UNIPHIER + sg_set_pinsel(180, 0); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(181, 0); /* USB0OD -> USB0OD */ + sg_set_pinsel(182, 0); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(183, 0); /* USB1OD -> USB1OD */ +#endif + +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(184, 0); /* USB2VBUS -> USB2VBUS */ + sg_set_pinsel(185, 0); /* USB2OD -> USB2OD */ + sg_set_pinsel(187, 0); /* USB3VBUS -> USB3VBUS */ + sg_set_pinsel(188, 0); /* USB3OD -> USB3OD */ +#endif + + writel(1, SG_LOADPINCTRL); +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/platdevice.c b/arch/arm/mach-uniphier/ph1-pro4/platdevice.c new file mode 100644 index 0000000000..7440ceddff --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/platdevice.c @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2014-2015 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <mach/platdevice.h> + +#define UART_MASTER_CLK 73728000 + +SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) +SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) +SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) +SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) diff --git a/arch/arm/mach-uniphier/ph1-pro4/pll_init.c b/arch/arm/mach-uniphier/ph1-pro4/pll_init.c new file mode 100644 index 0000000000..2a965a5e67 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/pll_init.c @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <mach/sc-regs.h> +#include <mach/sg-regs.h> + +#undef DPLL_SSC_RATE_1PER + +static void dpll_init(void) +{ + u32 tmp; + + /* + * Set Frequency + * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) + * to FOUT ( DPLLCTRL.bit[29:20] ) + */ + tmp = readl(SC_DPLLCTRL); + tmp &= ~(0x000f0000); +#if CONFIG_DDR_FREQ == 1600 + tmp |= 0x000c0000; +#elif CONFIG_DDR_FREQ == 1333 + tmp |= 0x000d0000; +#else +# error "Unsupported frequency" +#endif + + /* + * Set Moduration rate + * Set 0x0(1%)/0x1(2%) to SSC_RATE(DPLLCTRL.bit[15]) + */ +#if defined(DPLL_SSC_RATE_1PER) + tmp &= ~0x00008000; +#else + tmp |= 0x00008000; +#endif + writel(tmp, SC_DPLLCTRL); + + tmp = readl(SC_DPLLCTRL2); + tmp |= SC_DPLLCTRL2_NRSTDS; + writel(tmp, SC_DPLLCTRL2); +} + +static void vpll_init(void) +{ + u32 tmp, clk_mode_axosel; + + /* Set VPLL27A & VPLL27B */ + tmp = readl(SG_PINMON0); + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + +#if defined(CONFIG_MACH_PH1_PRO4) + /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */ + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) + return; +#endif + + /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ + tmp = readl(SC_VPLL27ACTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27BCTRL); + + /* Unset VPLA_K_LD and VPLB_K_LD bit */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Set VPLA_M and VPLB_M to 0x20 */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27BCTRL2); + + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) { + /* Set VPLA_K and VPLB_K for AXO: 25MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066666; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066666; + writel(tmp, SC_VPLL27BCTRL3); + } else { + /* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27BCTRL3); + } + + /* wait 1 usec */ + udelay(1); + + /* Set VPLA_K_LD and VPLB_K_LD to load K parameters */ + tmp = readl(SC_VPLL27ACTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Unset VPLA_SNRST and VPLB_SNRST bit */ + tmp = readl(SC_VPLL27ACTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ + tmp = readl(SC_VPLL27ACTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27BCTRL); +} + +void pll_init(void) +{ + dpll_init(); + vpll_init(); + + /* + * Wait 500 usec until dpll get stable + * We wait 1 usec in vpll_init() so 1 usec can be saved here. + */ + udelay(499); +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c new file mode 100644 index 0000000000..ff9c73ff21 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <mach/sc-regs.h> + +void enable_dpll_ssc(void) +{ + u32 tmp; + + tmp = readl(SC_DPLLCTRL); + tmp |= SC_DPLLCTRL_SSC_EN; + writel(tmp, SC_DPLLCTRL); +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c b/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c new file mode 100644 index 0000000000..5e75454dcb --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2011-2015 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <mach/sbc-regs.h> +#include <mach/sg-regs.h> + +void sbc_init(void) +{ + /* + * Only CS1 is connected to support card. + * BKSZ[1:0] should be set to "01". + */ + writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); + + if (boot_is_swapped()) { + /* + * Boot Swap On: boot from external NOR/SRAM + * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. + * + * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank + * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals + */ + writel(0x0000bc01, SBBASE0); + } else { + /* + * Boot Swap Off: boot from mask ROM + * 0x00000000-0x01ffffff: mask ROM + * 0x02000000-0x03efffff: memory bank (31MB) + * 0x03f00000-0x03ffffff: peripherals (1MB) + */ + writel(0x0000be01, SBBASE0); /* dummy */ + writel(0x0200be01, SBBASE1); + } +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c new file mode 100644 index 0000000000..67e6d8245b --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2011-2015 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <mach/sbc-regs.h> +#include <mach/sg-regs.h> + +void sbc_init(void) +{ + /* XECS0: boot/sub memory (boot swap = off/on) */ + writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); + writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); + writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); + writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); + + /* XECS1: sub/boot memory (boot swap = off/on) */ + writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); + + /* XECS3: peripherals */ + writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); + writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); + writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); + writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); + + writel(0x0000bc01, SBBASE0); /* boot memory */ + writel(0x0400bc01, SBBASE1); /* sub memory */ + writel(0x0800bf01, SBBASE3); /* peripherals */ + + /* enable access to sub memory when boot swap is on */ + if (boot_is_swapped()) + sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */ + + sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */ + writel(0x00000001, SG_LOADPINCTRL); +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/sg_init.c b/arch/arm/mach-uniphier/ph1-pro4/sg_init.c new file mode 100644 index 0000000000..8677666323 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/sg_init.c @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2011-2015 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/io.h> +#include <mach/sg-regs.h> + +void sg_init(void) +{ + u32 tmp; + + /* Input ports must be enabled before deasserting reset of cores */ + tmp = readl(SG_IECTRL); + tmp |= 1 << 6; + writel(tmp, SG_IECTRL); +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/umc_init.c b/arch/arm/mach-uniphier/ph1-pro4/umc_init.c new file mode 100644 index 0000000000..6cbb6b2473 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/umc_init.c @@ -0,0 +1,157 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <mach/umc-regs.h> +#include <mach/ddrphy-regs.h> + +static void umc_start_ssif(void __iomem *ssif_base) +{ + writel(0x00000001, ssif_base + 0x0000b004); + writel(0xffffffff, ssif_base + 0x0000c004); + writel(0x07ffffff, ssif_base + 0x0000c008); + writel(0x00000001, ssif_base + 0x0000b000); + writel(0x00000001, ssif_base + 0x0000c000); + + writel(0x03010100, ssif_base + UMC_HDMCHSEL); + writel(0x03010101, ssif_base + UMC_MDMCHSEL); + writel(0x03010100, ssif_base + UMC_DVCCHSEL); + writel(0x03010100, ssif_base + UMC_DMDCHSEL); + + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); + writel(0x00000000, ssif_base + 0x0000c044); /* DCGIV_SSIF_REG */ + + writel(0x00000001, ssif_base + UMC_CPURST); + writel(0x00000001, ssif_base + UMC_IDSRST); + writel(0x00000001, ssif_base + UMC_IXMRST); + writel(0x00000001, ssif_base + UMC_HDMRST); + writel(0x00000001, ssif_base + UMC_MDMRST); + writel(0x00000001, ssif_base + UMC_HDDRST); + writel(0x00000001, ssif_base + UMC_MDDRST); + writel(0x00000001, ssif_base + UMC_SIORST); + writel(0x00000001, ssif_base + UMC_GIORST); + writel(0x00000001, ssif_base + UMC_HD2RST); + writel(0x00000001, ssif_base + UMC_VIORST); + writel(0x00000001, ssif_base + UMC_DVCRST); + writel(0x00000001, ssif_base + UMC_RGLRST); + writel(0x00000001, ssif_base + UMC_VPERST); + writel(0x00000001, ssif_base + UMC_AIORST); + writel(0x00000001, ssif_base + UMC_DMDRST); +} + +static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, + int size, int freq) +{ + writel(0x66bb0f17, dramcont + UMC_CMDCTLA); + writel(0x18c6aa44, dramcont + UMC_CMDCTLB); + writel(0x5101387f, dramcont + UMC_INITCTLA); + writel(0x43030d3f, dramcont + UMC_INITCTLB); + writel(0x00ff00ff, dramcont + UMC_INITCTLC); + writel(0x00000d71, dramcont + UMC_DRMMR0); + writel(0x00000006, dramcont + UMC_DRMMR1); + writel(0x00000298, dramcont + UMC_DRMMR2); + writel(0x00000000, dramcont + UMC_DRMMR3); + writel(0x003f0617, dramcont + UMC_SPCCTLA); + writel(0x00ff0008, dramcont + UMC_SPCCTLB); + writel(0x000c00ae, dramcont + UMC_RDATACTL_D0); + writel(0x000c00ae, dramcont + UMC_RDATACTL_D1); + writel(0x04060802, dramcont + UMC_WDATACTL_D0); + writel(0x04060802, dramcont + UMC_WDATACTL_D1); + writel(0x04a02000, dramcont + UMC_DATASET); + writel(0x00000000, ca_base + 0x2300); + writel(0x00400020, dramcont + UMC_DCCGCTL); + writel(0x0000000f, dramcont + 0x7000); + writel(0x0000000f, dramcont + 0x8000); + writel(0x000000c3, dramcont + 0x8004); + writel(0x00000071, dramcont + 0x8008); + writel(0x00000004, dramcont + UMC_FLOWCTLG); + writel(0x00000000, dramcont + 0x0060); + writel(0x80000201, ca_base + 0xc20); + writel(0x0801e01e, dramcont + UMC_FLOWCTLA); + writel(0x00200000, dramcont + UMC_FLOWCTLB); + writel(0x00004444, dramcont + UMC_FLOWCTLC); + writel(0x200a0a00, dramcont + UMC_SPCSETB); + writel(0x00010000, dramcont + UMC_SPCSETD); + writel(0x80000020, dramcont + UMC_DFICUPDCTLA); +} + +static int umc_init_sub(int freq, int size_ch0, int size_ch1) +{ + void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; + void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); + void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); + void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); + void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); + void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); + void __iomem *phy0_1 = (void __iomem *)DDRPHY_BASE(0, 1); + void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); + void __iomem *phy1_1 = (void __iomem *)DDRPHY_BASE(1, 1); + + umc_dram_init_start(dramcont0); + umc_dram_init_start(dramcont1); + umc_dram_init_poll(dramcont0); + umc_dram_init_poll(dramcont1); + + writel(0x00000101, dramcont0 + UMC_DIOCTLA); + + ddrphy_init(phy0_0, freq, size_ch0); + + ddrphy_prepare_training(phy0_0, 0); + ddrphy_training(phy0_0); + + writel(0x00000103, dramcont0 + UMC_DIOCTLA); + + ddrphy_init(phy0_1, freq, size_ch0); + + ddrphy_prepare_training(phy0_1, 1); + ddrphy_training(phy0_1); + + writel(0x00000101, dramcont1 + UMC_DIOCTLA); + + ddrphy_init(phy1_0, freq, size_ch1); + + ddrphy_prepare_training(phy1_0, 0); + ddrphy_training(phy1_0); + + writel(0x00000103, dramcont1 + UMC_DIOCTLA); + + ddrphy_init(phy1_1, freq, size_ch1); + + ddrphy_prepare_training(phy1_1, 1); + ddrphy_training(phy1_1); + + umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); + umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); + + umc_start_ssif(ssif_base); + + return 0; +} + +int umc_init(void) +{ + return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, + CONFIG_SDRAM1_SIZE / 0x08000000); +} + +#if ((CONFIG_SDRAM0_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH0 == 2) || \ + (CONFIG_SDRAM0_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH0 == 1)) && \ + ((CONFIG_SDRAM1_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH1 == 2) || \ + (CONFIG_SDRAM1_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH1 == 1)) +/* OK */ +#else + #error Unsupported DDR configuration. +#endif |