diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/dts/Makefile | 3 | ||||
| -rw-r--r-- | arch/arm/dts/armada-xp-crs305-1g-4s-u-boot.dtsi | 13 | ||||
| -rw-r--r-- | arch/arm/dts/armada-xp-crs305-1g-4s.dts | 110 | ||||
| -rw-r--r-- | arch/arm/mach-mvebu/Kconfig | 7 |
4 files changed, 132 insertions, 1 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 8b971434eb..56bf5aa8de 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -162,7 +162,8 @@ dtb-$(CONFIG_ARCH_MVEBU) += \ armada-38x-controlcenterdc.dtb \ armada-385-atl-x530.dtb \ armada-385-atl-x530DP.dtb \ - armada-xp-db-xc3-24g4xg.dtb + armada-xp-db-xc3-24g4xg.dtb \ + armada-xp-crs305-1g-4s.dtb dtb-$(CONFIG_ARCH_UNIPHIER_LD11) += \ uniphier-ld11-global.dtb \ diff --git a/arch/arm/dts/armada-xp-crs305-1g-4s-u-boot.dtsi b/arch/arm/dts/armada-xp-crs305-1g-4s-u-boot.dtsi new file mode 100644 index 0000000000..8576a02730 --- /dev/null +++ b/arch/arm/dts/armada-xp-crs305-1g-4s-u-boot.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +&uart0 { + u-boot,dm-pre-reloc; +}; + +&spi0 { + u-boot,dm-pre-reloc; + + spi-flash@0 { + u-boot,dm-pre-reloc; + }; +}; diff --git a/arch/arm/dts/armada-xp-crs305-1g-4s.dts b/arch/arm/dts/armada-xp-crs305-1g-4s.dts new file mode 100644 index 0000000000..1116f5c96c --- /dev/null +++ b/arch/arm/dts/armada-xp-crs305-1g-4s.dts @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for CRS305-1G-4S board + * + * Copyright (C) 2016 Allied Telesis Labs + * + * Based on armada-xp-db.dts + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include "armada-xp-98dx3236.dtsi" +#include "armada-xp-crs305-1g-4s-u-boot.dtsi" + +/ { + model = "CRS305-1G-4S"; + compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + aliases { + spi0 = &spi0; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */ + }; +}; + +&L2 { + arm,parity-enable; + marvell,ecc-enable; +}; + +&devbus_bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <16>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x00100000 0x00040000>; + label = "u-boot-env"; + }; + partition@unused { + reg = <0x00140000 0x00ec0000>; + label = "unused"; + }; + + }; +}; diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index a832e1dc8c..495c48e6c7 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -164,6 +164,10 @@ config TARGET_DB_XC3_24G4XG bool "Support DB-XC3-24G4XG" select 98DX3336 +config TARGET_CRS305_1G_4S + bool "Support CRS305-1G-4S" + select 98DX3236 + endchoice config SYS_BOARD @@ -183,6 +187,7 @@ config SYS_BOARD default "a38x" if TARGET_CONTROLCENTERDC default "x530" if TARGET_X530 default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG + default "crs305-1g-4s" if TARGET_CRS305_1G_4S config SYS_CONFIG_NAME default "clearfog" if TARGET_CLEARFOG @@ -201,6 +206,7 @@ config SYS_CONFIG_NAME default "controlcenterdc" if TARGET_CONTROLCENTERDC default "x530" if TARGET_X530 default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG + default "crs305-1g-4s" if TARGET_CRS305_1G_4S config SYS_VENDOR default "Marvell" if TARGET_DB_MV784MP_GP @@ -218,6 +224,7 @@ config SYS_VENDOR default "CZ.NIC" if TARGET_TURRIS_MOX default "gdsys" if TARGET_CONTROLCENTERDC default "alliedtelesis" if TARGET_X530 + default "mikrotik" if TARGET_CRS305_1G_4S config SYS_SOC default "mvebu" |