diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/include/asm/arch-ixp/ixp425pci.h | 130 |
1 files changed, 4 insertions, 126 deletions
diff --git a/arch/arm/include/asm/arch-ixp/ixp425pci.h b/arch/arm/include/asm/arch-ixp/ixp425pci.h index 9ea3319d84..acafea76c2 100644 --- a/arch/arm/include/asm/arch-ixp/ixp425pci.h +++ b/arch/arm/include/asm/arch-ixp/ixp425pci.h @@ -22,88 +22,21 @@ * MA 02111-1307 USA */ -#ifndef _IXP425PCI_H_ -#define _IXP425PCI_H_ +#ifndef _IXP425PCI_H +#define _IXP425PCI_H -#define TRUE 1 -#define FALSE 0 #define OK 0 #define ERROR -1 -#define BOOL int -#define IXP425_PCI_MAX_BAR_PER_FUNC 6 -#define IXP425_PCI_MAX_BAR (IXP425_PCI_MAX_BAR_PER_FUNC * \ - IXP425_PCI_MAX_FUNC_ON_BUS) - -enum PciBarId -{ - CSR_BAR=0, - IO_BAR, - SD_BAR, - NO_BAR -}; - -/*Base address register descriptor*/ -typedef struct -{ - unsigned int size; - unsigned int address; -} PciBar; - -typedef struct -{ - unsigned int bus; - unsigned int device; - unsigned int func; - unsigned int irq; - BOOL error; - unsigned short vendor_id; - unsigned short device_id; - /*We need an extra entry in this array for dummy placeholder*/ - PciBar bar[IXP425_PCI_MAX_BAR_PER_FUNC + 1]; -} PciDevice; +struct pci_controller; +extern void pci_ixp_init(struct pci_controller *hose); /* Mask definitions*/ -#define IXP425_PCI_TOP_WORD_OF_LONG_MASK 0xffff0000 -#define IXP425_PCI_TOP_BYTE_OF_LONG_MASK 0xff000000 -#define IXP425_PCI_BOTTOM_WORD_OF_LONG_MASK 0x0000ffff -#define IXP425_PCI_BOTTOM_TRIBYTES_OF_LONG_MASK 0x00ffffff #define IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK 0x0000000f -#define IXP425_PCI_MAX_UINT32 0xffffffff - - -#define IXP425_PCI_BAR_QUERY 0xffffffff - -#define IXP425_PCI_BAR_MEM_BASE 0x100000 -#define IXP425_PCI_BAR_IO_BASE 0x000000 - -/*define the maximum number of bus segments - we support a single segment*/ -#define IXP425_PCI_MAX_BUS 1 -/*define the maximum number of cards per bus segment*/ -#define IXP425_PCI_MAX_DEV 4 -/*define the maximum number of functions per device*/ -#define IXP425_PCI_MAX_FUNC 8 -/* define the maximum number of separate functions that we can - potentially have on the bus*/ -#define IXP425_PCI_MAX_FUNC_ON_BUS (1+ IXP425_PCI_MAX_FUNC * \ - IXP425_PCI_MAX_DEV * \ - IXP425_PCI_MAX_BUS) -/*define the maximum number of BARs per function*/ -#define IXP425_PCI_MAX_BAR_PER_FUNC 6 -#define IXP425_PCI_MAX_BAR (IXP425_PCI_MAX_BAR_PER_FUNC * \ - IXP425_PCI_MAX_FUNC_ON_BUS) #define PCI_NP_CBE_BESL (4) #define PCI_NP_AD_FUNCSL (8) -#define REG_WRITE(b,o,v) (*(volatile unsigned int*)((b+o))=(v)) -#define REG_READ(b,o,v) ((v)=(*(volatile unsigned int*)((b+o)))) - -#define PCI_DELAY 500 -#define USEC_LOOP_COUNT 533 -#define PCI_SETTLE_USEC 200 -#define PCI_MIN_RESET_ASSERT_USEC 2000 - /*Register addressing definitions for PCI controller configuration and status registers*/ @@ -150,28 +83,6 @@ typedef struct #define NP_CMD_CONFIGWRITE (0xb) */ -/*define the default setting of the AHB memory base reg*/ -#define IXP425_PCI_AHBMEMBASE_DEFAULT 0x00010203 -#define IXP425_PCI_AHBIOBASE_DEFAULT 0x0 -#define IXP425_PCI_PCIMEMBASE_DEFAULT 0x0 - -/*define the default settings for the controller's BARs*/ -#ifdef IXP425_PCI_SIMPLE_MAPPING -#define IXP425_PCI_BAR_0_DEFAULT 0x00000000 -#define IXP425_PCI_BAR_1_DEFAULT 0x01000000 -#define IXP425_PCI_BAR_2_DEFAULT 0x02000000 -#define IXP425_PCI_BAR_3_DEFAULT 0x03000000 -#define IXP425_PCI_BAR_4_DEFAULT 0x00000000 -#define IXP425_PCI_BAR_5_DEFAULT 0x00000000 -#else -#define IXP425_PCI_BAR_0_DEFAULT 0x40000000 -#define IXP425_PCI_BAR_1_DEFAULT 0x41000000 -#define IXP425_PCI_BAR_2_DEFAULT 0x42000000 -#define IXP425_PCI_BAR_3_DEFAULT 0x43000000 -#define IXP425_PCI_BAR_4_DEFAULT 0x00000000 -#define IXP425_PCI_BAR_5_DEFAULT 0x00000000 -#endif - /*Configuration Port register bit definitions*/ #define PCI_CRP_WRITE BIT(16) @@ -228,17 +139,6 @@ typedef struct #define PCI_CFG_SPECIAL_USE 0x41 #define PCI_CFG_MODE 0x43 -/*Specify the initial command we send to PCI devices*/ -#define INITIAL_PCI_CMD (PCI_CMD_IO_ENABLE \ - | PCI_CMD_MEM_ENABLE \ - | PCI_CMD_MASTER_ENABLE \ - | PCI_CMD_WI_ENABLE) - -/*define the sub vendor and subsystem to be used */ -#define IXP425_PCI_SUB_VENDOR_SYSTEM 0x00000000 - -#define PCI_IRQ_LINES 4 - #define PCI_CMD_IO_ENABLE 0x0001 /* IO access enable */ #define PCI_CMD_MEM_ENABLE 0x0002 /* memory access enable */ #define PCI_CMD_MASTER_ENABLE 0x0004 /* bus master enable */ @@ -287,26 +187,4 @@ typedef struct #define PCI_DMACTRL_PADC1 BIT(14) #define PCI_DMACTRL_PADE1 BIT(15) -/* GPIO related register */ -#undef IXP425_GPIO_GPOUTR -#undef IXP425_GPIO_GPOER -#undef IXP425_GPIO_GPINR -#undef IXP425_GPIO_GPISR -#undef IXP425_GPIO_GPIT1R -#undef IXP425_GPIO_GPIT2R -#undef IXP425_GPIO_GPCLKR - -#define IXP425_GPIO_GPOUTR 0xC8004000 -#define IXP425_GPIO_GPOER 0xC8004004 -#define IXP425_GPIO_GPINR 0xC8004008 -#define IXP425_GPIO_GPISR 0xC800400C -#define IXP425_GPIO_GPIT1R 0xC8004010 -#define IXP425_GPIO_GPIT2R 0xC8004014 -#define IXP425_GPIO_GPCLKR 0xC8004018 - -#define READ_GPIO_REG(addr,val) \ - (val) = *((volatile int *)(addr)); -#define WRITE_GPIO_REG(addr,val) \ - *((volatile int *)(addr)) = (val); - #endif |