summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/cpu/armv7/am33xx/board.c11
-rw-r--r--arch/arm/cpu/armv7/am33xx/clock_am33xx.c8
-rw-r--r--arch/arm/cpu/armv7/am33xx/sys_info.c57
-rw-r--r--arch/arm/cpu/armv7/omap-common/boot-common.c3
-rw-r--r--arch/arm/cpu/armv7/omap-common/clocks-common.c7
-rw-r--r--arch/arm/cpu/armv7/omap5/prcm-regs.c12
-rw-r--r--arch/arm/include/asm/arch-am33xx/clocks_am33xx.h12
-rw-r--r--arch/arm/include/asm/arch-am33xx/cpu.h12
-rw-r--r--arch/arm/include/asm/arch-am33xx/sys_proto.h4
-rw-r--r--arch/arm/include/asm/omap_common.h6
10 files changed, 104 insertions, 28 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 2ea3d698fb..a31bf40e5b 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -27,6 +27,7 @@
#include <miiphy.h>
#include <cpsw.h>
#include <asm/errno.h>
+#include <linux/compiler.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/musb.h>
@@ -137,6 +138,16 @@ int arch_misc_init(void)
}
#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
+/*
+ * This function is the place to do per-board things such as ramp up the
+ * MPU clock frequency.
+ */
+__weak void am33xx_spl_board_init(void)
+{
+ do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
+ do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
+}
+
static void rtc32k_enable(void)
{
struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
diff --git a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
index e5f287b338..fabe2595a3 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
@@ -51,10 +51,14 @@ const struct dpll_regs dpll_ddr_regs = {
.cm_div_m2_dpll = CM_WKUP + 0xA0,
};
-const struct dpll_params dpll_mpu = {
+struct dpll_params dpll_mpu_opp100 = {
CONFIG_SYS_MPUCLK, OSC-1, 1, -1, -1, -1, -1};
-const struct dpll_params dpll_core = {
+const struct dpll_params dpll_core_opp100 = {
1000, OSC-1, -1, -1, 10, 8, 4};
+const struct dpll_params dpll_mpu = {
+ MPUPLL_M_300, OSC-1, 1, -1, -1, -1, -1};
+const struct dpll_params dpll_core = {
+ 50, OSC-1, -1, -1, 1, 1, 1};
const struct dpll_params dpll_per = {
960, OSC-1, 5, -1, -1, -1, -1};
diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/cpu/armv7/am33xx/sys_info.c
index 63afaaa328..50eb598ff2 100644
--- a/arch/arm/cpu/armv7/am33xx/sys_info.c
+++ b/arch/arm/cpu/armv7/am33xx/sys_info.c
@@ -17,6 +17,7 @@
#include <asm/arch/sys_proto.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clock.h>
+#include <power/tps65910.h>
struct ctrl_stat *cstat = (struct ctrl_stat *)CTRL_BASE;
@@ -119,3 +120,59 @@ int print_cpuinfo(void)
return 0;
}
#endif /* CONFIG_DISPLAY_CPUINFO */
+
+#ifdef CONFIG_AM33XX
+int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev)
+{
+ int sil_rev;
+
+ sil_rev = readl(&cdev->deviceid) >> 28;
+
+ if (sil_rev == 1)
+ /* PG 2.0, efuse may not be set. */
+ return MPUPLL_M_800;
+ else if (sil_rev >= 2) {
+ /* Check what the efuse says our max speed is. */
+ int efuse_arm_mpu_max_freq;
+ efuse_arm_mpu_max_freq = readl(&cdev->efuse_sma);
+ switch ((efuse_arm_mpu_max_freq & DEVICE_ID_MASK)) {
+ case AM335X_ZCZ_1000:
+ return MPUPLL_M_1000;
+ case AM335X_ZCZ_800:
+ return MPUPLL_M_800;
+ case AM335X_ZCZ_720:
+ return MPUPLL_M_720;
+ case AM335X_ZCZ_600:
+ case AM335X_ZCE_600:
+ return MPUPLL_M_600;
+ case AM335X_ZCZ_300:
+ case AM335X_ZCE_300:
+ return MPUPLL_M_300;
+ }
+ }
+
+ /* PG 1.0 or otherwise unknown, use the PG1.0 max */
+ return MPUPLL_M_720;
+}
+
+int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency)
+{
+ /* For PG2.1 and later, we have one set of values. */
+ if (sil_rev >= 2) {
+ switch (frequency) {
+ case MPUPLL_M_1000:
+ return TPS65910_OP_REG_SEL_1_3_2_5;
+ case MPUPLL_M_800:
+ return TPS65910_OP_REG_SEL_1_2_6;
+ case MPUPLL_M_720:
+ return TPS65910_OP_REG_SEL_1_2_0;
+ case MPUPLL_M_600:
+ case MPUPLL_M_300:
+ return TPS65910_OP_REG_SEL_1_1_3;
+ }
+ }
+
+ /* Default to PG1.0/PG2.0 values. */
+ return TPS65910_OP_REG_SEL_1_1_3;
+}
+#endif
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 6b4772b684..0ffa03ac01 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -76,6 +76,9 @@ void spl_board_init(void)
#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
arch_misc_init();
#endif
+#ifdef CONFIG_AM33XX
+ am33xx_spl_board_init();
+#endif
}
int board_mmc_init(bd_t *bis)
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index 7580594074..ab0c5680f5 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -589,13 +589,6 @@ void scale_vcores(struct vcores_data const *vcores)
val = optimize_vcore_voltage(&vcores->iva);
do_scale_vcore(vcores->iva.addr, val, vcores->iva.pmic);
-
- if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) {
- /* Configure LDO SRAM "magic" bits */
- writel(2, (*prcm)->prm_sldo_core_setup);
- writel(2, (*prcm)->prm_sldo_mpu_setup);
- writel(2, (*prcm)->prm_sldo_mm_setup);
- }
}
static inline void enable_clock_domain(u32 const clkctrl_reg, u32 enable_mode)
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index 579818d559..5a3d52c11a 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -286,12 +286,6 @@ struct prcm_regs const omap5_es1_prcm = {
.prm_vc_val_bypass = 0x4ae07ba0,
.prm_vc_cfg_i2c_mode = 0x4ae07bb4,
.prm_vc_cfg_i2c_clk = 0x4ae07bb8,
- .prm_sldo_core_setup = 0x4ae07bc4,
- .prm_sldo_core_ctrl = 0x4ae07bc8,
- .prm_sldo_mpu_setup = 0x4ae07bcc,
- .prm_sldo_mpu_ctrl = 0x4ae07bd0,
- .prm_sldo_mm_setup = 0x4ae07bd4,
- .prm_sldo_mm_ctrl = 0x4ae07bd8,
/* SCRM stuff, used by some boards */
.scrm_auxclk0 = 0x4ae0a310,
@@ -735,12 +729,6 @@ struct prcm_regs const omap5_es2_prcm = {
.prm_vc_cfg_i2c_mode = 0x4ae07cb4,
.prm_vc_cfg_i2c_clk = 0x4ae07cb8,
- .prm_sldo_core_setup = 0x4ae07cc4,
- .prm_sldo_core_ctrl = 0x4ae07cc8,
- .prm_sldo_mpu_setup = 0x4ae07ccc,
- .prm_sldo_mpu_ctrl = 0x4ae07cd0,
- .prm_sldo_mm_setup = 0x4ae07cd4,
- .prm_sldo_mm_ctrl = 0x4ae07cd8,
.prm_abbldo_mpu_setup = 0x4ae07cdc,
.prm_abbldo_mpu_ctrl = 0x4ae07ce0,
diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
index 140379fb38..02ed5957e9 100644
--- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
+++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
@@ -11,9 +11,17 @@
#ifndef _CLOCKS_AM33XX_H_
#define _CLOCKS_AM33XX_H_
+/* MAIN PLL Fdll supported frequencies */
+#define MPUPLL_M_1000 1000
+#define MPUPLL_M_800 800
+#define MPUPLL_M_720 720
+#define MPUPLL_M_600 600
+#define MPUPLL_M_550 550
+#define MPUPLL_M_300 300
+
/* MAIN PLL Fdll = 550 MHz, by default */
#ifndef CONFIG_SYS_MPUCLK
-#define CONFIG_SYS_MPUCLK 550
+#define CONFIG_SYS_MPUCLK MPUPLL_M_550
#endif
#define UART_RESET (0x1 << 1)
@@ -21,5 +29,7 @@
#define UART_SMART_IDLE_EN (0x1 << 0x3)
extern void enable_dmm_clocks(void);
+extern const struct dpll_params dpll_core_opp100;
+extern struct dpll_params dpll_mpu_opp100;
#endif /* endif _CLOCKS_AM33XX_H_ */
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index 73e6db8998..52fa128af9 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -38,6 +38,16 @@
#define AM335X 0xB944
#define TI81XX 0xB81E
#define DEVICE_ID (CTRL_BASE + 0x0600)
+#define DEVICE_ID_MASK 0x1FFF
+
+/* MPU max frequencies */
+#define AM335X_ZCZ_300 0x1FEF
+#define AM335X_ZCZ_600 0x1FAF
+#define AM335X_ZCZ_720 0x1F2F
+#define AM335X_ZCZ_800 0x1E2F
+#define AM335X_ZCZ_1000 0x1C2F
+#define AM335X_ZCE_300 0x1FDF
+#define AM335X_ZCE_600 0x1F9F
/* This gives the status of the boot mode pins on the evm */
#define SYSBOOT_MASK (BIT(0) | BIT(1) | BIT(2)\
@@ -509,6 +519,8 @@ struct ctrl_dev {
unsigned int macid1h; /* offset 0x3c */
unsigned int resv4[4];
unsigned int miisel; /* offset 0x50 */
+ unsigned int resv5[106];
+ unsigned int efuse_sma; /* offset 0x1FC */
};
/* gmii_sel register defines */
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index c6070a3fc9..87b7d367b9 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -10,6 +10,7 @@
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
+#include <asm/arch/cpu.h>
#define BOARD_REV_ID 0x0
@@ -42,4 +43,7 @@ u32 wait_on_value(u32, u32, void *, u32);
#ifdef CONFIG_NOR_BOOT
void enable_norboot_pin_mux(void);
#endif
+void am33xx_spl_board_init(void);
+int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev);
+int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency);
#endif
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 5e2f027ba4..61fee9f06d 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -310,12 +310,6 @@ struct prcm_regs {
u32 prm_vc_val_bypass;
u32 prm_vc_cfg_i2c_mode;
u32 prm_vc_cfg_i2c_clk;
- u32 prm_sldo_core_setup;
- u32 prm_sldo_core_ctrl;
- u32 prm_sldo_mpu_setup;
- u32 prm_sldo_mpu_ctrl;
- u32 prm_sldo_mm_setup;
- u32 prm_sldo_mm_ctrl;
u32 prm_abbldo_mpu_setup;
u32 prm_abbldo_mpu_ctrl;
generated by cgit (git 2.34.1) at 2024-12-28 22:29:54 +0000