diff options
Diffstat (limited to 'arch/arm')
22 files changed, 496 insertions, 384 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1f1ccad10a..41f3220580 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -839,6 +839,8 @@ endchoice source "arch/arm/cpu/arm926ejs/davinci/Kconfig" +source "arch/arm/cpu/arm1176/bcm2835/Kconfig" + source "arch/arm/cpu/armv7/exynos/Kconfig" source "arch/arm/cpu/armv7/highbank/Kconfig" diff --git a/arch/arm/cpu/arm1176/bcm2835/Kconfig b/arch/arm/cpu/arm1176/bcm2835/Kconfig new file mode 100644 index 0000000000..94f57d732f --- /dev/null +++ b/arch/arm/cpu/arm1176/bcm2835/Kconfig @@ -0,0 +1,12 @@ +if TARGET_RPI + +config DM + default y if !SPL_BUILD + +config DM_SERIAL + default y if !SPL_BUILD + +config DM_GPIO + default y if !SPL_BUILD + +endif diff --git a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c index 31188c85bc..529a119514 100644 --- a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c +++ b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c @@ -118,4 +118,7 @@ void enable_basic_clocks(void) /* Select the Master osc clk as Timer2 clock source */ writel(0x1, &cmdpll->clktimer2clk); + + /* For OPP100 the mac clock should be /5. */ + writel(0x4, &cmdpll->clkselmacclk); } diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index 7fcb5d2094..2064efa761 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -65,6 +65,27 @@ endchoice config SYS_SOC default "exynos" +config DM + default y if !SPL_BUILD + +config DM_SERIAL + default y if !SPL_BUILD + +config DM_SPI + default y if !SPL_BUILD + +config DM_SPI_FLASH + default y if !SPL_BUILD + +config DM_GPIO + default y if !SPL_BUILD + +config SYS_MALLOC_F + default y if !SPL_BUILD + +config SYS_MALLOC_F_LEN + default 0x400 if !SPL_BUILD + source "board/samsung/smdkv310/Kconfig" source "board/samsung/trats/Kconfig" source "board/samsung/universal_c210/Kconfig" diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index b31c13b14b..c6455c2f3c 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -20,42 +20,84 @@ * positions of the peripheral clocks of the src and div registers */ struct clk_bit_info { + enum periph_id id; + int32_t src_mask; + int32_t div_mask; + int32_t prediv_mask; int8_t src_bit; int8_t div_bit; int8_t prediv_bit; }; -/* src_bit div_bit prediv_bit */ -static struct clk_bit_info clk_bit_info[] = { - {0, 0, -1}, - {4, 4, -1}, - {8, 8, -1}, - {12, 12, -1}, - {0, 0, 8}, - {4, 16, 24}, - {8, 0, 8}, - {12, 16, 24}, - {-1, -1, -1}, - {16, 0, 8}, - {20, 16, 24}, - {24, 0, 8}, - {0, 0, 4}, - {4, 12, 16}, - {-1, -1, -1}, - {-1, -1, -1}, - {-1, 24, 0}, - {-1, 24, 0}, - {-1, 24, 0}, - {-1, 24, 0}, - {-1, 24, 0}, - {-1, 24, 0}, - {-1, 24, 0}, - {-1, 24, 0}, - {24, 0, -1}, - {24, 0, -1}, - {24, 0, -1}, - {24, 0, -1}, - {24, 0, -1}, +static struct clk_bit_info exynos5_bit_info[] = { + /* periph id s_mask d_mask p_mask s_bit d_bit p_bit */ + {PERIPH_ID_UART0, 0xf, 0xf, -1, 0, 0, -1}, + {PERIPH_ID_UART1, 0xf, 0xf, -1, 4, 4, -1}, + {PERIPH_ID_UART2, 0xf, 0xf, -1, 8, 8, -1}, + {PERIPH_ID_UART3, 0xf, 0xf, -1, 12, 12, -1}, + {PERIPH_ID_I2C0, -1, 0x7, 0x7, -1, 24, 0}, + {PERIPH_ID_I2C1, -1, 0x7, 0x7, -1, 24, 0}, + {PERIPH_ID_I2C2, -1, 0x7, 0x7, -1, 24, 0}, + {PERIPH_ID_I2C3, -1, 0x7, 0x7, -1, 24, 0}, + {PERIPH_ID_I2C4, -1, 0x7, 0x7, -1, 24, 0}, + {PERIPH_ID_I2C5, -1, 0x7, 0x7, -1, 24, 0}, + {PERIPH_ID_I2C6, -1, 0x7, 0x7, -1, 24, 0}, + {PERIPH_ID_I2C7, -1, 0x7, 0x7, -1, 24, 0}, + {PERIPH_ID_SPI0, 0xf, 0xf, 0xff, 16, 0, 8}, + {PERIPH_ID_SPI1, 0xf, 0xf, 0xff, 20, 16, 24}, + {PERIPH_ID_SPI2, 0xf, 0xf, 0xff, 24, 0, 8}, + {PERIPH_ID_SDMMC0, 0xf, 0xf, 0xff, 0, 0, 8}, + {PERIPH_ID_SDMMC1, 0xf, 0xf, 0xff, 4, 16, 24}, + {PERIPH_ID_SDMMC2, 0xf, 0xf, 0xff, 8, 0, 8}, + {PERIPH_ID_SDMMC3, 0xf, 0xf, 0xff, 12, 16, 24}, + {PERIPH_ID_I2S0, 0xf, 0xf, 0xff, 0, 0, 4}, + {PERIPH_ID_I2S1, 0xf, 0xf, 0xff, 4, 12, 16}, + {PERIPH_ID_SPI3, 0xf, 0xf, 0xff, 0, 0, 4}, + {PERIPH_ID_SPI4, 0xf, 0xf, 0xff, 4, 12, 16}, + {PERIPH_ID_SDMMC4, 0xf, 0xf, 0xff, 16, 0, 8}, + {PERIPH_ID_PWM0, 0xf, 0xf, -1, 24, 0, -1}, + {PERIPH_ID_PWM1, 0xf, 0xf, -1, 24, 0, -1}, + {PERIPH_ID_PWM2, 0xf, 0xf, -1, 24, 0, -1}, + {PERIPH_ID_PWM3, 0xf, 0xf, -1, 24, 0, -1}, + {PERIPH_ID_PWM4, 0xf, 0xf, -1, 24, 0, -1}, + + {PERIPH_ID_NONE, -1, -1, -1, -1, -1, -1}, +}; + +static struct clk_bit_info exynos542x_bit_info[] = { + /* periph id s_mask d_mask p_mask s_bit d_bit p_bit */ + {PERIPH_ID_UART0, 0xf, 0xf, -1, 4, 8, -1}, + {PERIPH_ID_UART1, 0xf, 0xf, -1, 8, 12, -1}, + {PERIPH_ID_UART2, 0xf, 0xf, -1, 12, 16, -1}, + {PERIPH_ID_UART3, 0xf, 0xf, -1, 16, 20, -1}, + {PERIPH_ID_I2C0, -1, 0x3f, -1, -1, 8, -1}, + {PERIPH_ID_I2C1, -1, 0x3f, -1, -1, 8, -1}, + {PERIPH_ID_I2C2, -1, 0x3f, -1, -1, 8, -1}, + {PERIPH_ID_I2C3, -1, 0x3f, -1, -1, 8, -1}, + {PERIPH_ID_I2C4, -1, 0x3f, -1, -1, 8, -1}, + {PERIPH_ID_I2C5, -1, 0x3f, -1, -1, 8, -1}, + {PERIPH_ID_I2C6, -1, 0x3f, -1, -1, 8, -1}, + {PERIPH_ID_I2C7, -1, 0x3f, -1, -1, 8, -1}, + {PERIPH_ID_SPI0, 0xf, 0xf, 0xff, 20, 20, 8}, + {PERIPH_ID_SPI1, 0xf, 0xf, 0xff, 24, 24, 16}, + {PERIPH_ID_SPI2, 0xf, 0xf, 0xff, 28, 28, 24}, + {PERIPH_ID_SDMMC0, 0x7, 0x3ff, -1, 8, 0, -1}, + {PERIPH_ID_SDMMC1, 0x7, 0x3ff, -1, 12, 10, -1}, + {PERIPH_ID_SDMMC2, 0x7, 0x3ff, -1, 16, 20, -1}, + {PERIPH_ID_I2C8, -1, 0x3f, -1, -1, 8, -1}, + {PERIPH_ID_I2C9, -1, 0x3f, -1, -1, 8, -1}, + {PERIPH_ID_I2S0, 0xf, 0xf, 0xff, 0, 0, 4}, + {PERIPH_ID_I2S1, 0xf, 0xf, 0xff, 4, 12, 16}, + {PERIPH_ID_SPI3, 0xf, 0xf, 0xff, 12, 16, 0}, + {PERIPH_ID_SPI4, 0xf, 0xf, 0xff, 16, 20, 8}, + {PERIPH_ID_PWM0, 0xf, 0xf, -1, 24, 28, -1}, + {PERIPH_ID_PWM1, 0xf, 0xf, -1, 24, 28, -1}, + {PERIPH_ID_PWM2, 0xf, 0xf, -1, 24, 28, -1}, + {PERIPH_ID_PWM3, 0xf, 0xf, -1, 24, 28, -1}, + {PERIPH_ID_PWM4, 0xf, 0xf, -1, 24, 28, -1}, + {PERIPH_ID_I2C10, -1, 0x3f, -1, -1, 8, -1}, + + {PERIPH_ID_NONE, -1, -1, -1, -1, -1, -1}, }; /* Epll Clock division values to achive different frequency output */ @@ -260,11 +302,72 @@ static unsigned long exynos5_get_pll_clk(int pllreg) return fout; } +/* exynos542x: return pll clock frequency */ +static unsigned long exynos542x_get_pll_clk(int pllreg) +{ + struct exynos5420_clock *clk = + (struct exynos5420_clock *)samsung_get_base_clock(); + unsigned long r, k = 0; + + switch (pllreg) { + case APLL: + r = readl(&clk->apll_con0); + break; + case MPLL: + r = readl(&clk->mpll_con0); + break; + case EPLL: + r = readl(&clk->epll_con0); + k = readl(&clk->epll_con1); + break; + case VPLL: + r = readl(&clk->vpll_con0); + k = readl(&clk->vpll_con1); + break; + case BPLL: + r = readl(&clk->bpll_con0); + break; + case RPLL: + r = readl(&clk->rpll_con0); + k = readl(&clk->rpll_con1); + break; + case SPLL: + r = readl(&clk->spll_con0); + break; + default: + printf("Unsupported PLL (%d)\n", pllreg); + return 0; + } + + return exynos_get_pll_clk(pllreg, r, k); +} + +static struct clk_bit_info *get_clk_bit_info(int peripheral) +{ + int i; + struct clk_bit_info *info; + + if (proid_is_exynos5420() || proid_is_exynos5800()) + info = exynos542x_bit_info; + else + info = exynos5_bit_info; + + for (i = 0; info[i].id != PERIPH_ID_NONE; i++) { + if (info[i].id == peripheral) + break; + } + + if (info[i].id == PERIPH_ID_NONE) + debug("ERROR: Peripheral ID %d not found\n", peripheral); + + return &info[i]; +} + static unsigned long exynos5_get_periph_rate(int peripheral) { - struct clk_bit_info *bit_info = &clk_bit_info[peripheral]; - unsigned long sclk, sub_clk; - unsigned int src, div, sub_div; + struct clk_bit_info *bit_info = get_clk_bit_info(peripheral); + unsigned long sclk = 0; + unsigned int src = 0, div = 0, sub_div = 0; struct exynos5_clock *clk = (struct exynos5_clock *)samsung_get_base_clock(); @@ -286,27 +389,30 @@ static unsigned long exynos5_get_periph_rate(int peripheral) break; case PERIPH_ID_I2S0: src = readl(&clk->src_mau); - div = readl(&clk->div_mau); + div = sub_div = readl(&clk->div_mau); case PERIPH_ID_SPI0: case PERIPH_ID_SPI1: src = readl(&clk->src_peric1); - div = readl(&clk->div_peric1); + div = sub_div = readl(&clk->div_peric1); break; case PERIPH_ID_SPI2: src = readl(&clk->src_peric1); - div = readl(&clk->div_peric2); + div = sub_div = readl(&clk->div_peric2); break; case PERIPH_ID_SPI3: case PERIPH_ID_SPI4: src = readl(&clk->sclk_src_isp); - div = readl(&clk->sclk_div_isp); + div = sub_div = readl(&clk->sclk_div_isp); break; case PERIPH_ID_SDMMC0: case PERIPH_ID_SDMMC1: + src = readl(&clk->src_fsys); + div = sub_div = readl(&clk->div_fsys1); + break; case PERIPH_ID_SDMMC2: case PERIPH_ID_SDMMC3: src = readl(&clk->src_fsys); - div = readl(&clk->div_fsys1); + div = sub_div = readl(&clk->div_fsys2); break; case PERIPH_ID_I2C0: case PERIPH_ID_I2C1: @@ -316,18 +422,17 @@ static unsigned long exynos5_get_periph_rate(int peripheral) case PERIPH_ID_I2C5: case PERIPH_ID_I2C6: case PERIPH_ID_I2C7: - sclk = exynos5_get_pll_clk(MPLL); - sub_div = ((readl(&clk->div_top1) >> bit_info->div_bit) - & 0x7) + 1; - div = ((readl(&clk->div_top0) >> bit_info->prediv_bit) - & 0x7) + 1; - return (sclk / sub_div) / div; + src = EXYNOS_SRC_MPLL; + div = readl(&clk->div_top0); + sub_div = readl(&clk->div_top1); + break; default: debug("%s: invalid peripheral %d", __func__, peripheral); return -1; }; - src = (src >> bit_info->src_bit) & 0xf; + if (bit_info->src_bit >= 0) + src = (src >> bit_info->src_bit) & bit_info->src_mask; switch (src) { case EXYNOS_SRC_MPLL: @@ -340,68 +445,126 @@ static unsigned long exynos5_get_periph_rate(int peripheral) sclk = exynos5_get_pll_clk(VPLL); break; default: + debug("%s: EXYNOS_SRC %d not supported\n", __func__, src); return 0; } - /* Ratio clock division for this peripheral */ - sub_div = (div >> bit_info->div_bit) & 0xf; - sub_clk = sclk / (sub_div + 1); - - /* Pre-ratio clock division for SDMMC0 and 2 */ - if (peripheral == PERIPH_ID_SDMMC0 || peripheral == PERIPH_ID_SDMMC2) { - div = (div >> bit_info->prediv_bit) & 0xff; - return sub_clk / (div + 1); - } + /* Clock divider ratio for this peripheral */ + if (bit_info->div_bit >= 0) + div = (div >> bit_info->div_bit) & bit_info->div_mask; - return sub_clk; -} + /* Clock pre-divider ratio for this peripheral */ + if (bit_info->prediv_bit >= 0) + sub_div = (sub_div >> bit_info->prediv_bit) + & bit_info->prediv_mask; -unsigned long clock_get_periph_rate(int peripheral) -{ - if (cpu_is_exynos5()) - return exynos5_get_periph_rate(peripheral); - else - return 0; + /* Calculate and return required clock rate */ + return (sclk / (div + 1)) / (sub_div + 1); } -/* exynos5420: return pll clock frequency */ -static unsigned long exynos5420_get_pll_clk(int pllreg) +static unsigned long exynos542x_get_periph_rate(int peripheral) { + struct clk_bit_info *bit_info = get_clk_bit_info(peripheral); + unsigned long sclk = 0; + unsigned int src = 0, div = 0, sub_div = 0; struct exynos5420_clock *clk = - (struct exynos5420_clock *)samsung_get_base_clock(); - unsigned long r, k = 0; + (struct exynos5420_clock *)samsung_get_base_clock(); - switch (pllreg) { - case APLL: - r = readl(&clk->apll_con0); + switch (peripheral) { + case PERIPH_ID_UART0: + case PERIPH_ID_UART1: + case PERIPH_ID_UART2: + case PERIPH_ID_UART3: + case PERIPH_ID_PWM0: + case PERIPH_ID_PWM1: + case PERIPH_ID_PWM2: + case PERIPH_ID_PWM3: + case PERIPH_ID_PWM4: + src = readl(&clk->src_peric0); + div = readl(&clk->div_peric0); break; - case MPLL: - r = readl(&clk->mpll_con0); + case PERIPH_ID_SPI0: + case PERIPH_ID_SPI1: + case PERIPH_ID_SPI2: + src = readl(&clk->src_peric1); + div = readl(&clk->div_peric1); + sub_div = readl(&clk->div_peric4); break; - case EPLL: - r = readl(&clk->epll_con0); - k = readl(&clk->epll_con1); + case PERIPH_ID_SPI3: + case PERIPH_ID_SPI4: + src = readl(&clk->src_isp); + div = readl(&clk->div_isp1); + sub_div = readl(&clk->div_isp1); break; - case VPLL: - r = readl(&clk->vpll_con0); - k = readl(&clk->vpll_con1); + case PERIPH_ID_SDMMC0: + case PERIPH_ID_SDMMC1: + case PERIPH_ID_SDMMC2: + case PERIPH_ID_SDMMC3: + src = readl(&clk->src_fsys); + div = readl(&clk->div_fsys1); break; - case BPLL: - r = readl(&clk->bpll_con0); + case PERIPH_ID_I2C0: + case PERIPH_ID_I2C1: + case PERIPH_ID_I2C2: + case PERIPH_ID_I2C3: + case PERIPH_ID_I2C4: + case PERIPH_ID_I2C5: + case PERIPH_ID_I2C6: + case PERIPH_ID_I2C7: + case PERIPH_ID_I2C8: + case PERIPH_ID_I2C9: + case PERIPH_ID_I2C10: + src = EXYNOS542X_SRC_MPLL; + div = readl(&clk->div_top1); break; - case RPLL: - r = readl(&clk->rpll_con0); - k = readl(&clk->rpll_con1); + default: + debug("%s: invalid peripheral %d", __func__, peripheral); + return -1; + }; + + if (bit_info->src_bit >= 0) + src = (src >> bit_info->src_bit) & bit_info->src_mask; + + switch (src) { + case EXYNOS542X_SRC_MPLL: + sclk = exynos542x_get_pll_clk(MPLL); break; - case SPLL: - r = readl(&clk->spll_con0); + case EXYNOS542X_SRC_SPLL: + sclk = exynos542x_get_pll_clk(SPLL); + break; + case EXYNOS542X_SRC_EPLL: + sclk = exynos542x_get_pll_clk(EPLL); + break; + case EXYNOS542X_SRC_RPLL: + sclk = exynos542x_get_pll_clk(RPLL); break; default: - printf("Unsupported PLL (%d)\n", pllreg); + debug("%s: EXYNOS542X_SRC %d not supported", __func__, src); return 0; } - return exynos_get_pll_clk(pllreg, r, k); + /* Clock divider ratio for this peripheral */ + if (bit_info->div_bit >= 0) + div = (div >> bit_info->div_bit) & bit_info->div_mask; + + /* Clock pre-divider ratio for this peripheral */ + if (bit_info->prediv_bit >= 0) + sub_div = (sub_div >> bit_info->prediv_bit) + & bit_info->prediv_mask; + + /* Calculate and return required clock rate */ + return (sclk / (div + 1)) / (sub_div + 1); +} + +unsigned long clock_get_periph_rate(int peripheral) +{ + if (cpu_is_exynos5()) { + if (proid_is_exynos5420() || proid_is_exynos5800()) + return exynos542x_get_periph_rate(peripheral); + return exynos5_get_periph_rate(peripheral); + } else { + return 0; + } } /* exynos4: return ARM clock frequency */ @@ -527,27 +690,6 @@ static unsigned long exynos4x12_get_pwm_clk(void) return pclk; } -/* exynos5420: return pwm clock frequency */ -static unsigned long exynos5420_get_pwm_clk(void) -{ - struct exynos5420_clock *clk = - (struct exynos5420_clock *)samsung_get_base_clock(); - unsigned long pclk, sclk; - unsigned int ratio; - - /* - * CLK_DIV_PERIC0 - * PWM_RATIO [31:28] - */ - ratio = readl(&clk->div_peric0); - ratio = (ratio >> 28) & 0xf; - sclk = get_pll_clk(MPLL); - - pclk = sclk / (ratio + 1); - - return pclk; -} - /* exynos4: return uart clock frequency */ static unsigned long exynos4_get_uart_clk(int dev_index) { @@ -640,100 +782,6 @@ static unsigned long exynos4x12_get_uart_clk(int dev_index) return uclk; } -/* exynos5: return uart clock frequency */ -static unsigned long exynos5_get_uart_clk(int dev_index) -{ - struct exynos5_clock *clk = - (struct exynos5_clock *)samsung_get_base_clock(); - unsigned long uclk, sclk; - unsigned int sel; - unsigned int ratio; - - /* - * CLK_SRC_PERIC0 - * UART0_SEL [3:0] - * UART1_SEL [7:4] - * UART2_SEL [8:11] - * UART3_SEL [12:15] - * UART4_SEL [16:19] - * UART5_SEL [23:20] - */ - sel = readl(&clk->src_peric0); - sel = (sel >> (dev_index << 2)) & 0xf; - - if (sel == 0x6) - sclk = get_pll_clk(MPLL); - else if (sel == 0x7) - sclk = get_pll_clk(EPLL); - else if (sel == 0x8) - sclk = get_pll_clk(VPLL); - else - return 0; - - /* - * CLK_DIV_PERIC0 - * UART0_RATIO [3:0] - * UART1_RATIO [7:4] - * UART2_RATIO [8:11] - * UART3_RATIO [12:15] - * UART4_RATIO [16:19] - * UART5_RATIO [23:20] - */ - ratio = readl(&clk->div_peric0); - ratio = (ratio >> (dev_index << 2)) & 0xf; - - uclk = sclk / (ratio + 1); - - return uclk; -} - -/* exynos5420: return uart clock frequency */ -static unsigned long exynos5420_get_uart_clk(int dev_index) -{ - struct exynos5420_clock *clk = - (struct exynos5420_clock *)samsung_get_base_clock(); - unsigned long uclk, sclk; - unsigned int sel; - unsigned int ratio; - - /* - * CLK_SRC_PERIC0 - * UART0_SEL [6:4] - * UART1_SEL [10:8] - * UART2_SEL [14:12] - * UART3_SEL [18:16] - * generalised calculation as follows - * sel = (sel >> ((dev_index * 4) + 4)) & mask; - */ - sel = readl(&clk->src_peric0); - sel = (sel >> ((dev_index * 4) + 4)) & 0x7; - - if (sel == 0x3) - sclk = get_pll_clk(MPLL); - else if (sel == 0x6) - sclk = get_pll_clk(EPLL); - else if (sel == 0x7) - sclk = get_pll_clk(RPLL); - else - return 0; - - /* - * CLK_DIV_PERIC0 - * UART0_RATIO [11:8] - * UART1_RATIO [15:12] - * UART2_RATIO [19:16] - * UART3_RATIO [23:20] - * generalised calculation as follows - * ratio = (ratio >> ((dev_index * 4) + 8)) & mask; - */ - ratio = readl(&clk->div_peric0); - ratio = (ratio >> ((dev_index * 4) + 8)) & 0xf; - - uclk = sclk / (ratio + 1); - - return uclk; -} - static unsigned long exynos4_get_mmc_clk(int dev_index) { struct exynos4_clock *clk = @@ -783,94 +831,6 @@ static unsigned long exynos4_get_mmc_clk(int dev_index) return uclk; } -static unsigned long exynos5_get_mmc_clk(int dev_index) -{ - struct exynos5_clock *clk = - (struct exynos5_clock *)samsung_get_base_clock(); - unsigned long uclk, sclk; - unsigned int sel, ratio, pre_ratio; - int shift = 0; - - sel = readl(&clk->src_fsys); - sel = (sel >> (dev_index << 2)) & 0xf; - - if (sel == 0x6) - sclk = get_pll_clk(MPLL); - else if (sel == 0x7) - sclk = get_pll_clk(EPLL); - else if (sel == 0x8) - sclk = get_pll_clk(VPLL); - else - return 0; - - switch (dev_index) { - case 0: - case 1: - ratio = readl(&clk->div_fsys1); - pre_ratio = readl(&clk->div_fsys1); - break; - case 2: - case 3: - ratio = readl(&clk->div_fsys2); - pre_ratio = readl(&clk->div_fsys2); - break; - default: - return 0; - } - - if (dev_index == 1 || dev_index == 3) - shift = 16; - - ratio = (ratio >> shift) & 0xf; - pre_ratio = (pre_ratio >> (shift + 8)) & 0xff; - uclk = (sclk / (ratio + 1)) / (pre_ratio + 1); - - return uclk; -} - -static unsigned long exynos5420_get_mmc_clk(int dev_index) -{ - struct exynos5420_clock *clk = - (struct exynos5420_clock *)samsung_get_base_clock(); - unsigned long uclk, sclk; - unsigned int sel, ratio; - - /* - * CLK_SRC_FSYS - * MMC0_SEL [10:8] - * MMC1_SEL [14:12] - * MMC2_SEL [18:16] - * generalised calculation as follows - * sel = (sel >> ((dev_index * 4) + 8)) & mask - */ - sel = readl(&clk->src_fsys); - sel = (sel >> ((dev_index * 4) + 8)) & 0x7; - - if (sel == 0x3) - sclk = get_pll_clk(MPLL); - else if (sel == 0x4) - sclk = get_pll_clk(SPLL); - else if (sel == 0x6) - sclk = get_pll_clk(EPLL); - else - return 0; - - /* - * CLK_DIV_FSYS1 - * MMC0_RATIO [9:0] - * MMC1_RATIO [19:10] - * MMC2_RATIO [29:20] - * generalised calculation as follows - * ratio = (ratio >> (dev_index * 10)) & mask - */ - ratio = readl(&clk->div_fsys1); - ratio = (ratio >> (dev_index * 10)) & 0x3ff; - - uclk = (sclk / (ratio + 1)); - - return uclk; -} - /* exynos4: set the mmc clock */ static void exynos4_set_mmc_clk(int dev_index, unsigned int div) { @@ -1249,29 +1209,6 @@ void exynos4_set_mipi_clk(void) clrsetbits_le32(&clk->div_lcd0, 0xf << 16, 0x1 << 16); } -/* - * I2C - * - * exynos5: obtaining the I2C clock - */ -static unsigned long exynos5_get_i2c_clk(void) -{ - struct exynos5_clock *clk = - (struct exynos5_clock *)samsung_get_base_clock(); - unsigned long aclk_66, aclk_66_pre, sclk; - unsigned int ratio; - - sclk = get_pll_clk(MPLL); - - ratio = (readl(&clk->div_top1)) >> 24; - ratio &= 0x7; - aclk_66_pre = sclk / (ratio + 1); - ratio = readl(&clk->div_top0); - ratio &= 0x7; - aclk_66 = aclk_66_pre / (ratio + 1); - return aclk_66; -} - int exynos5_set_epll_clk(unsigned long rate) { unsigned int epll_con, epll_con_k; @@ -1585,7 +1522,7 @@ unsigned long get_pll_clk(int pllreg) { if (cpu_is_exynos5()) { if (proid_is_exynos5420() || proid_is_exynos5800()) - return exynos5420_get_pll_clk(pllreg); + return exynos542x_get_pll_clk(pllreg); return exynos5_get_pll_clk(pllreg); } else { if (proid_is_exynos4412()) @@ -1608,7 +1545,7 @@ unsigned long get_arm_clk(void) unsigned long get_i2c_clk(void) { if (cpu_is_exynos5()) { - return exynos5_get_i2c_clk(); + return clock_get_periph_rate(PERIPH_ID_I2C0); } else if (cpu_is_exynos4()) { return exynos4_get_i2c_clk(); } else { @@ -1620,8 +1557,6 @@ unsigned long get_i2c_clk(void) unsigned long get_pwm_clk(void) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420() || proid_is_exynos5800()) - return exynos5420_get_pwm_clk(); return clock_get_periph_rate(PERIPH_ID_PWM0); } else { if (proid_is_exynos4412()) @@ -1632,10 +1567,28 @@ unsigned long get_pwm_clk(void) unsigned long get_uart_clk(int dev_index) { + enum periph_id id; + + switch (dev_index) { + case 0: + id = PERIPH_ID_UART0; + break; + case 1: + id = PERIPH_ID_UART1; + break; + case 2: + id = PERIPH_ID_UART2; + break; + case 3: + id = PERIPH_ID_UART3; + break; + default: + debug("%s: invalid UART index %d", __func__, dev_index); + return -1; + } + if (cpu_is_exynos5()) { - if (proid_is_exynos5420() || proid_is_exynos5800()) - return exynos5420_get_uart_clk(dev_index); - return exynos5_get_uart_clk(dev_index); + return clock_get_periph_rate(id); } else { if (proid_is_exynos4412()) return exynos4x12_get_uart_clk(dev_index); @@ -1645,10 +1598,28 @@ unsigned long get_uart_clk(int dev_index) unsigned long get_mmc_clk(int dev_index) { + enum periph_id id; + + switch (dev_index) { + case 0: + id = PERIPH_ID_SDMMC0; + break; + case 1: + id = PERIPH_ID_SDMMC1; + break; + case 2: + id = PERIPH_ID_SDMMC2; + break; + case 3: + id = PERIPH_ID_SDMMC3; + break; + default: + debug("%s: invalid MMC index %d", __func__, dev_index); + return -1; + } + if (cpu_is_exynos5()) { - if (proid_is_exynos5420() || proid_is_exynos5800()) - return exynos5420_get_mmc_clk(dev_index); - return exynos5_get_mmc_clk(dev_index); + return clock_get_periph_rate(id); } else { return exynos4_get_mmc_clk(dev_index); } @@ -1656,6 +1627,10 @@ unsigned long get_mmc_clk(int dev_index) void set_mmc_clk(int dev_index, unsigned int div) { + /* If want to set correct value, it needs to substract one from div.*/ + if (div > 0) + div -= 1; + if (cpu_is_exynos5()) { if (proid_is_exynos5420() || proid_is_exynos5800()) exynos5420_set_mmc_clk(dev_index, div); diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c index 1520d642c5..1b12051656 100644 --- a/arch/arm/cpu/armv7/exynos/power.c +++ b/arch/arm/cpu/armv7/exynos/power.c @@ -102,10 +102,34 @@ static void exynos5_set_usbdrd_phy_ctrl(unsigned int enable) } } +static void exynos5420_set_usbdev_phy_ctrl(unsigned int enable) +{ + struct exynos5420_power *power = + (struct exynos5420_power *)samsung_get_base_power(); + + if (enable) { + /* Enabling USBDEV_PHY */ + setbits_le32(&power->usbdev_phy_control, + POWER_USB_DRD_PHY_CTRL_EN); + setbits_le32(&power->usbdev1_phy_control, + POWER_USB_DRD_PHY_CTRL_EN); + } else { + /* Disabling USBDEV_PHY */ + clrbits_le32(&power->usbdev_phy_control, + POWER_USB_DRD_PHY_CTRL_EN); + clrbits_le32(&power->usbdev1_phy_control, + POWER_USB_DRD_PHY_CTRL_EN); + } +} + void set_usbdrd_phy_ctrl(unsigned int enable) { - if (cpu_is_exynos5()) - exynos5_set_usbdrd_phy_ctrl(enable); + if (cpu_is_exynos5()) { + if (proid_is_exynos5420() || proid_is_exynos5800()) + exynos5420_set_usbdev_phy_ctrl(enable); + else + exynos5_set_usbdrd_phy_ctrl(enable); + } } static void exynos5_dp_phy_control(unsigned int enable) diff --git a/arch/arm/cpu/armv7/keystone/ddr3.c b/arch/arm/cpu/armv7/keystone/ddr3.c index 923906afb5..dfb27b5ba2 100644 --- a/arch/arm/cpu/armv7/keystone/ddr3.c +++ b/arch/arm/cpu/armv7/keystone/ddr3.c @@ -263,17 +263,14 @@ static void ddr3_map_ecc_cic2_irq(u32 base) } #endif -void ddr3_init_ecc(u32 base) +void ddr3_init_ecc(u32 base, u32 ddr3_size) { - u32 ddr3_size; - if (!ddr3_ecc_support_rmw(base)) { ddr3_disable_ecc(base); return; } ddr3_ecc_init_range(base); - ddr3_size = ddr3_get_size(); ddr3_reset_data(CONFIG_SYS_SDRAM_BASE, ddr3_size); /* mapping DDR3 ECC system interrupt from CIC2 to GIC */ diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index e601ba1886..c01a98f719 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -252,6 +252,8 @@ static void ddr3_init(u32 base, const struct emif_regs *regs) { struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl); + writel(regs->sdram_config_init, &emif->emif_sdram_config); /* * Set SDRAM_CONFIG and PHY control registers to locked frequency * and RL =7. As the default values of the Mode Registers are not @@ -265,7 +267,6 @@ static void ddr3_init(u32 base, const struct emif_regs *regs) writel(regs->sdram_tim2, &emif->emif_sdram_tim_2); writel(regs->sdram_tim3, &emif->emif_sdram_tim_3); - writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl); writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl); /* @@ -274,6 +275,7 @@ static void ddr3_init(u32 base, const struct emif_regs *regs) */ if (is_dra7xx()) { do_ext_phy_settings(base, regs); + writel(regs->ref_ctrl_final, &emif->emif_sdram_ref_ctrl); writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config); writel(regs->sdram_config_init, &emif->emif_sdram_config); } else { diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig index a029379a4f..46440981b3 100644 --- a/arch/arm/cpu/armv7/omap3/Kconfig +++ b/arch/arm/cpu/armv7/omap3/Kconfig @@ -93,6 +93,21 @@ config TARGET_TWISTER endchoice +config DM + default y if !SPL_BUILD + +config DM_GPIO + default y if DM && !SPL_BUILD + +config DM_SERIAL + default y if DM && !SPL_BUILD + +config SYS_MALLOC_F + default y if DM && !SPL_BUILD + +config SYS_MALLOC_F_LEN + default 0x400 if DM && !SPL_BUILD + config SYS_SOC default "omap3" diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c index 7d8cec08c2..5f8daa1ee1 100644 --- a/arch/arm/cpu/armv7/omap5/sdram.c +++ b/arch/arm/cpu/armv7/omap5/sdram.c @@ -141,7 +141,8 @@ const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = { .sdram_config_init = 0x61851ab2, .sdram_config = 0x61851ab2, .sdram_config2 = 0x08000000, - .ref_ctrl = 0x00001035, + .ref_ctrl = 0x000040F1, + .ref_ctrl_final = 0x00001035, .sdram_tim1 = 0xCCCF36B3, .sdram_tim2 = 0x308F7FDA, .sdram_tim3 = 0x027F88A8, @@ -151,10 +152,10 @@ const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = { .emif_ddr_phy_ctlr_1_init = 0x0E24400A, .emif_ddr_phy_ctlr_1 = 0x0E24400A, .emif_ddr_ext_phy_ctrl_1 = 0x10040100, - .emif_ddr_ext_phy_ctrl_2 = 0x00BB00BB, - .emif_ddr_ext_phy_ctrl_3 = 0x00BB00BB, - .emif_ddr_ext_phy_ctrl_4 = 0x00BB00BB, - .emif_ddr_ext_phy_ctrl_5 = 0x00BB00BB, + .emif_ddr_ext_phy_ctrl_2 = 0x00910091, + .emif_ddr_ext_phy_ctrl_3 = 0x00950095, + .emif_ddr_ext_phy_ctrl_4 = 0x009B009B, + .emif_ddr_ext_phy_ctrl_5 = 0x009E009E, .emif_rd_wr_lvl_rmp_win = 0x00000000, .emif_rd_wr_lvl_rmp_ctl = 0x00000000, .emif_rd_wr_lvl_ctl = 0x00000000, @@ -165,7 +166,8 @@ const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = { .sdram_config_init = 0x61851B32, .sdram_config = 0x61851B32, .sdram_config2 = 0x08000000, - .ref_ctrl = 0x00001035, + .ref_ctrl = 0x000040F1, + .ref_ctrl_final = 0x00001035, .sdram_tim1 = 0xCCCF36B3, .sdram_tim2 = 0x308F7FDA, .sdram_tim3 = 0x027F88A8, @@ -175,10 +177,10 @@ const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = { .emif_ddr_phy_ctlr_1_init = 0x0E24400A, .emif_ddr_phy_ctlr_1 = 0x0E24400A, .emif_ddr_ext_phy_ctrl_1 = 0x10040100, - .emif_ddr_ext_phy_ctrl_2 = 0x00BB00BB, - .emif_ddr_ext_phy_ctrl_3 = 0x00BB00BB, - .emif_ddr_ext_phy_ctrl_4 = 0x00BB00BB, - .emif_ddr_ext_phy_ctrl_5 = 0x00BB00BB, + .emif_ddr_ext_phy_ctrl_2 = 0x00910091, + .emif_ddr_ext_phy_ctrl_3 = 0x00950095, + .emif_ddr_ext_phy_ctrl_4 = 0x009B009B, + .emif_ddr_ext_phy_ctrl_5 = 0x009E009E, .emif_rd_wr_lvl_rmp_win = 0x00000000, .emif_rd_wr_lvl_rmp_ctl = 0x00000000, .emif_rd_wr_lvl_ctl = 0x00000000, @@ -186,18 +188,19 @@ const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = { }; const struct emif_regs emif_1_regs_ddr3_666_mhz_1cs_dra_es1 = { - .sdram_config_init = 0x61851AB2, - .sdram_config = 0x61851AB2, + .sdram_config_init = 0x61862B32, + .sdram_config = 0x61862B32, .sdram_config2 = 0x08000000, - .ref_ctrl = 0x00001035, - .sdram_tim1 = 0xCCCF36B3, - .sdram_tim2 = 0x308F7FDA, - .sdram_tim3 = 0x027F88A8, + .ref_ctrl = 0x0000493E, + .ref_ctrl_final = 0x0000144A, + .sdram_tim1 = 0xD113781C, + .sdram_tim2 = 0x308F7FE3, + .sdram_tim3 = 0x009F86A8, .read_idle_ctrl = 0x00050000, .zq_config = 0x0007190B, .temp_alert_config = 0x00000000, - .emif_ddr_phy_ctlr_1_init = 0x0024400A, - .emif_ddr_phy_ctlr_1 = 0x0024400A, + .emif_ddr_phy_ctlr_1_init = 0x0E24400D, + .emif_ddr_phy_ctlr_1 = 0x0E24400D, .emif_ddr_ext_phy_ctrl_1 = 0x10040100, .emif_ddr_ext_phy_ctrl_2 = 0x00A400A4, .emif_ddr_ext_phy_ctrl_3 = 0x00A900A9, @@ -420,22 +423,22 @@ const u32 ddr3_ext_phy_ctrl_const_base_es2[] = { const u32 dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = { - 0x00BB00BB, - 0x00440044, - 0x00440044, - 0x00440044, - 0x00440044, - 0x00440044, + 0x00980098, + 0x00340034, + 0x00350035, + 0x00340034, + 0x00310031, + 0x00340034, 0x007F007F, 0x007F007F, 0x007F007F, 0x007F007F, 0x007F007F, - 0x00600060, - 0x00600060, - 0x00600060, - 0x00600060, - 0x00600060, + 0x00480048, + 0x004A004A, + 0x00520052, + 0x00550055, + 0x00500050, 0x00000000, 0x00600020, 0x40010080, @@ -449,22 +452,22 @@ dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = { const u32 dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = { - 0x00BB00BB, - 0x00440044, - 0x00440044, - 0x00440044, - 0x00440044, - 0x00440044, + 0x00980098, + 0x00330033, + 0x00330033, + 0x002F002F, + 0x00320032, + 0x00310031, 0x007F007F, 0x007F007F, 0x007F007F, 0x007F007F, 0x007F007F, - 0x00600060, - 0x00600060, - 0x00600060, - 0x00600060, - 0x00600060, + 0x00520052, + 0x00520052, + 0x00470047, + 0x00490049, + 0x00500050, 0x00000000, 0x00600020, 0x40010080, diff --git a/arch/arm/cpu/armv7/rmobile/Kconfig b/arch/arm/cpu/armv7/rmobile/Kconfig index 6d94199de8..35866508a3 100644 --- a/arch/arm/cpu/armv7/rmobile/Kconfig +++ b/arch/arm/cpu/armv7/rmobile/Kconfig @@ -21,6 +21,9 @@ config TARGET_KZM9G config TARGET_ALT bool "Alt board" +config TARGET_SILK + bool "Silk board" + endchoice config SYS_SOC @@ -28,7 +31,7 @@ config SYS_SOC config RMOBILE_EXTRAM_BOOT bool "Enable boot from RAM" - depends on TARGET_ALT || TARGET_KOELSCH || TARGET_LAGER + depends on TARGET_ALT || TARGET_KOELSCH || TARGET_LAGER || TARGET_SILK default n source "board/atmark-techno/armadillo-800eva/Kconfig" @@ -37,5 +40,6 @@ source "board/renesas/koelsch/Kconfig" source "board/renesas/lager/Kconfig" source "board/kmc/kzm9g/Kconfig" source "board/renesas/alt/Kconfig" +source "board/renesas/silk/Kconfig" endif diff --git a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S index d47546a11d..a5dbbea9e1 100644 --- a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S +++ b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S @@ -40,7 +40,7 @@ do_lowlevel_init: and r1, r1, #0x7F00 lsrs r1, r1, #8 cmp r1, #0x4C /* 0x4C is ID of r8a7794 */ - beq _exit_init_l2_a15 + beq _enable_actlr_smp /* surpress wfe if ca15 */ tst r4, #4 @@ -64,6 +64,16 @@ do_lowlevel_init: orrne r0, r0, #0x20 /* L2CTLR[5] */ #endif mcrne p15, 1, r0, c9, c0, 2 + + b _exit_init_l2_a15 + +_enable_actlr_smp: /* R8A7794 only (CA7) */ +#ifndef CONFIG_DCACHE_OFF + mrc p15, 0, r0, c1, c0, 1 + orr r0, r0, #0x40 + mcr p15, 0, r0, c1, c0, 1 +#endif + _exit_init_l2_a15: ldr r3, =(CONFIG_SYS_INIT_SP_ADDR) sub sp, r3, #4 diff --git a/arch/arm/cpu/armv7/tegra-common/Kconfig b/arch/arm/cpu/armv7/tegra-common/Kconfig index 1446452c23..ee3246929a 100644 --- a/arch/arm/cpu/armv7/tegra-common/Kconfig +++ b/arch/arm/cpu/armv7/tegra-common/Kconfig @@ -17,9 +17,33 @@ config TEGRA124 endchoice +config SYS_MALLOC_F + default y + +config SYS_MALLOC_F_LEN + default 0x1800 + config USE_PRIVATE_LIBGCC default y if SPL_BUILD +config DM + default y if !SPL_BUILD + +config DM_SERIAL + default y if !SPL_BUILD + +config DM_SPI + default y if !SPL_BUILD + +config DM_SPI_FLASH + default y if !SPL_BUILD + +config DM_I2C + default y if !SPL_BUILD + +config DM_GPIO + default y if !SPL_BUILD + source "arch/arm/cpu/armv7/tegra20/Kconfig" source "arch/arm/cpu/armv7/tegra30/Kconfig" source "arch/arm/cpu/armv7/tegra114/Kconfig" diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig index 5c5a84fe56..1a47ac9029 100644 --- a/arch/arm/cpu/armv7/uniphier/Kconfig +++ b/arch/arm/cpu/armv7/uniphier/Kconfig @@ -48,6 +48,12 @@ config DCC_MICRO_SUPPORT_CARD endchoice +config SYS_MALLOC_F + default y + +config SYS_MALLOC_F_LEN + default 0x2000 + config CMD_PINMON bool "Enable boot mode pins monitor command" default y diff --git a/arch/arm/dts/exynos4412-odroid.dts b/arch/arm/dts/exynos4412-odroid.dts index 00a2917596..582f6e594b 100644 --- a/arch/arm/dts/exynos4412-odroid.dts +++ b/arch/arm/dts/exynos4412-odroid.dts @@ -85,4 +85,9 @@ reg = <0x125B0000 0x100>; }; }; + + emmc-reset { + compatible = "samsung,emmc-reset"; + reset-gpio = <&gpk1 2 0>; + }; }; diff --git a/arch/arm/dts/exynos5422-odroidxu3.dts b/arch/arm/dts/exynos5422-odroidxu3.dts index 8f4663733c..d0a8621fda 100644 --- a/arch/arm/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/dts/exynos5422-odroidxu3.dts @@ -46,4 +46,9 @@ mmc@12220000 { fifoth_val = <0x201f0020>; }; + + emmc-reset { + compatible = "samsung,emmc-reset"; + reset-gpio = <&gpd1 0 0>; + }; }; diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index b94b56cba7..523d22eb87 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -400,6 +400,8 @@ struct prm_device_inst { struct cm_dpll { unsigned int resv1; unsigned int clktimer2clk; /* offset 0x04 */ + unsigned int resv2[11]; + unsigned int clkselmacclk; /* offset 0x34 */ }; #endif /* CONFIG_AM43XX */ diff --git a/arch/arm/include/asm/arch-at91/at91_pio.h b/arch/arm/include/asm/arch-at91/at91_pio.h index 50464ffe8e..301227880a 100644 --- a/arch/arm/include/asm/arch-at91/at91_pio.h +++ b/arch/arm/include/asm/arch-at91/at91_pio.h @@ -114,14 +114,10 @@ typedef union at91_pio { at91_port_t pioa; at91_port_t piob; at91_port_t pioc; - #if (ATMEL_PIO_PORTS > 3) - at91_port_t piod; - #endif - #if (ATMEL_PIO_PORTS > 4) - at91_port_t pioe; - #endif - } ; - at91_port_t port[ATMEL_PIO_PORTS]; + at91_port_t piod; /* not present in all hardware */ + at91_port_t pioe;/* not present in all hardware */ + }; + at91_port_t port[5]; } at91_pio_t; #ifdef CONFIG_AT91_GPIO diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h index db24dc0e89..2a17dfc6de 100644 --- a/arch/arm/include/asm/arch-exynos/clk.h +++ b/arch/arm/include/asm/arch-exynos/clk.h @@ -26,6 +26,10 @@ enum pll_src_bit { EXYNOS_SRC_MPLL = 6, EXYNOS_SRC_EPLL, EXYNOS_SRC_VPLL, + EXYNOS542X_SRC_MPLL = 3, + EXYNOS542X_SRC_SPLL, + EXYNOS542X_SRC_EPLL = 6, + EXYNOS542X_SRC_RPLL, }; unsigned long get_pll_clk(int pllreg); diff --git a/arch/arm/include/asm/arch-keystone/ddr3.h b/arch/arm/include/asm/arch-keystone/ddr3.h index b044d6f18f..a22c237c80 100644 --- a/arch/arm/include/asm/arch-keystone/ddr3.h +++ b/arch/arm/include/asm/arch-keystone/ddr3.h @@ -48,10 +48,9 @@ struct ddr3_emif_config { unsigned int sdrfc; }; -void ddr3_init(void); -int ddr3_get_size(void); +u32 ddr3_init(void); void ddr3_reset_ddrphy(void); -void ddr3_init_ecc(u32 base); +void ddr3_init_ecc(u32 base, u32 ddr3_size); void ddr3_disable_ecc(u32 base); void ddr3_check_ecc_int(u32 base); int ddr3_ecc_support_rmw(u32 base); diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h index 8f6426bc1b..564441cbfa 100644 --- a/arch/arm/include/asm/arch-lpc32xx/config.h +++ b/arch/arm/include/asm/arch-lpc32xx/config.h @@ -1,7 +1,7 @@ /* * Common definitions for LPC32XX board configurations * - * Copyright (C) 2011 Vladimir Zapolskiy <vz@mleia.com> + * Copyright (C) 2011-2015 Vladimir Zapolskiy <vz@mleia.com> * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,6 +9,8 @@ #ifndef _LPC32XX_CONFIG_H #define _LPC32XX_CONFIG_H +#define CONFIG_SYS_GENERIC_BOARD + /* Basic CPU architecture */ #define CONFIG_ARCH_CPU_INIT diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h index 342f045f41..7a545ea01a 100644 --- a/arch/arm/include/asm/emif.h +++ b/arch/arm/include/asm/emif.h @@ -1149,6 +1149,7 @@ struct emif_regs { u32 sdram_config; u32 sdram_config2; u32 ref_ctrl; + u32 ref_ctrl_final; u32 sdram_tim1; u32 sdram_tim2; u32 sdram_tim3; |