summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/dts/r8a77970-eagle.dts2
-rw-r--r--arch/arm/dts/r8a77990-ebisu.dts38
2 files changed, 39 insertions, 1 deletions
diff --git a/arch/arm/dts/r8a77970-eagle.dts b/arch/arm/dts/r8a77970-eagle.dts
index 5b8b2f8704..5dcad63492 100644
--- a/arch/arm/dts/r8a77970-eagle.dts
+++ b/arch/arm/dts/r8a77970-eagle.dts
@@ -39,13 +39,13 @@
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
status = "okay";
- reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
phy0: ethernet-phy@0 {
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
};
diff --git a/arch/arm/dts/r8a77990-ebisu.dts b/arch/arm/dts/r8a77990-ebisu.dts
index 1946999874..8b0d24bd29 100644
--- a/arch/arm/dts/r8a77990-ebisu.dts
+++ b/arch/arm/dts/r8a77990-ebisu.dts
@@ -28,6 +28,24 @@
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&avb {
@@ -71,6 +89,18 @@
groups = "scif_clk_a";
function = "scif_clk";
};
+
+ sdhi3_pins: sd2 {
+ groups = "sdhi3_data8", "sdhi3_ctrl";
+ function = "sdhi3";
+ power-source = <1800>;
+ };
+
+ sdhi3_pins_uhs: sd2_uhs {
+ groups = "sdhi3_data8", "sdhi3_ctrl";
+ function = "sdhi3";
+ power-source = <1800>;
+ };
};
&sdhi0 {
@@ -82,7 +112,15 @@
};
&sdhi3 {
+ /* used for on-board 8bit eMMC */
+ pinctrl-0 = <&sdhi3_pins>;
+ pinctrl-1 = <&sdhi3_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_1p8v>;
bus-width = <8>;
+ mmc-hs200-1_8v;
non-removable;
status = "okay";
};