summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig10
-rw-r--r--arch/arm/dts/am57xx-beagle-x15.dts6
-rw-r--r--arch/arm/dts/am57xx-idk-common.dtsi2
-rw-r--r--arch/arm/dts/dra7.dtsi22
-rw-r--r--arch/arm/include/asm/arch-omap5/clock.h2
-rw-r--r--arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h3
-rw-r--r--arch/arm/include/asm/arch-omap5/sys_proto.h7
-rw-r--r--arch/arm/include/asm/omap_mmc.h59
-rw-r--r--arch/arm/lib/interrupts_64.c13
-rw-r--r--arch/arm/mach-omap2/Kconfig10
-rw-r--r--arch/arm/mach-omap2/omap5/dra7xx_iodelay.c30
-rw-r--r--arch/arm/mach-omap2/omap5/hw_data.c10
12 files changed, 142 insertions, 32 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 77cb20090c..2c52ff025a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1190,6 +1190,16 @@ config ARCH_ASPEED
endchoice
+config TI_SECURE_DEVICE
+ bool "HS Device Type Support"
+ depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS
+ help
+ If a high secure (HS) device type is being used, this config
+ must be set. This option impacts various aspects of the
+ build system (to create signed boot images that can be
+ authenticated) and the code. See the doc/README.ti-secure
+ file for further details.
+
source "arch/arm/mach-aspeed/Kconfig"
source "arch/arm/mach-at91/Kconfig"
diff --git a/arch/arm/dts/am57xx-beagle-x15.dts b/arch/arm/dts/am57xx-beagle-x15.dts
index d6689106d2..8d9bdf10a7 100644
--- a/arch/arm/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/dts/am57xx-beagle-x15.dts
@@ -25,6 +25,11 @@
pinctrl-1 = <&mmc1_pins_hs>;
vmmc-supply = <&ldo1_reg>;
+ /delete-property/ sd-uhs-sdr104;
+ /delete-property/ sd-uhs-sdr50;
+ /delete-property/ sd-uhs-ddr50;
+ /delete-property/ sd-uhs-sdr25;
+ /delete-property/ sd-uhs-sdr12;
};
&mmc2 {
@@ -32,6 +37,7 @@
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
+ /delete-property/ mmc-hs200-1_8v;
};
/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
diff --git a/arch/arm/dts/am57xx-idk-common.dtsi b/arch/arm/dts/am57xx-idk-common.dtsi
index 97aa8e6a56..fa5a078b27 100644
--- a/arch/arm/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/dts/am57xx-idk-common.dtsi
@@ -413,6 +413,8 @@
bus-width = <8>;
ti,non-removable;
max-frequency = <96000000>;
+ no-1-8-v;
+ /delete-property/ mmc-hs200-1_8v;
};
&dcan1 {
diff --git a/arch/arm/dts/dra7.dtsi b/arch/arm/dts/dra7.dtsi
index 02a136a466..0f982d8b44 100644
--- a/arch/arm/dts/dra7.dtsi
+++ b/arch/arm/dts/dra7.dtsi
@@ -1056,7 +1056,7 @@
};
mmc1: mmc@4809c000 {
- compatible = "ti,omap4-hsmmc";
+ compatible = "ti,dra7-hsmmc", "ti,omap4-hsmmc";
reg = <0x4809c000 0x400>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc1";
@@ -1067,10 +1067,15 @@
status = "disabled";
pbias-supply = <&pbias_mmc_reg>;
max-frequency = <192000000>;
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
};
mmc2: mmc@480b4000 {
- compatible = "ti,omap4-hsmmc";
+ compatible = "ti,dra7-hsmmc", "ti,omap4-hsmmc";
reg = <0x480b4000 0x400>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc2";
@@ -1079,10 +1084,14 @@
dma-names = "tx", "rx";
status = "disabled";
max-frequency = <192000000>;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
+ mmc-hs200-1_8v;
+ mmc-ddr-1_8v;
};
mmc3: mmc@480ad000 {
- compatible = "ti,omap4-hsmmc";
+ compatible = "ti,dra7-hsmmc", "ti,omap4-hsmmc";
reg = <0x480ad000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc3";
@@ -1092,10 +1101,13 @@
status = "disabled";
/* Errata i887 limits max-frequency of MMC3 to 64 MHz */
max-frequency = <64000000>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
};
mmc4: mmc@480d1000 {
- compatible = "ti,omap4-hsmmc";
+ compatible = "ti,dra7-hsmmc", "ti,omap4-hsmmc";
reg = <0x480d1000 0x400>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc4";
@@ -1104,6 +1116,8 @@
dma-names = "tx", "rx";
status = "disabled";
max-frequency = <192000000>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
};
mmu0_dsp1: mmu@40d01000 {
diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h
index ee2e78b99b..3d718c02df 100644
--- a/arch/arm/include/asm/arch-omap5/clock.h
+++ b/arch/arm/include/asm/arch-omap5/clock.h
@@ -135,7 +135,7 @@
/* CM_L3INIT_HSMMCn_CLKCTRL */
#define HSMMC_CLKCTRL_CLKSEL_MASK (1 << 24)
-#define HSMMC_CLKCTRL_CLKSEL_DIV_MASK (1 << 25)
+#define HSMMC_CLKCTRL_CLKSEL_DIV_MASK (3 << 25)
/* CM_L3INIT_SATA_CLKCTRL */
#define SATA_CLKCTRL_OPTFCLKEN_MASK (1 << 8)
diff --git a/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h b/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h
index c997004039..a8780eeef8 100644
--- a/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h
+++ b/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h
@@ -83,6 +83,9 @@
void __recalibrate_iodelay(struct pad_conf_entry const *pad, int npads,
struct iodelay_cfg_entry const *iodelay,
int niodelays);
+void late_recalibrate_iodelay(struct pad_conf_entry const *pad, int npads,
+ struct iodelay_cfg_entry const *iodelay,
+ int niodelays);
int __recalibrate_iodelay_start(void);
void __recalibrate_iodelay_end(int ret);
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index a6b3557b50..d43cd7f2e7 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -35,6 +35,12 @@ struct pad_conf_entry {
u32 val;
};
+struct mmc_platform_fixups {
+ const char *hw_rev;
+ u32 unsupported_caps;
+ u32 max_freq;
+};
+
struct omap_sysinfo {
char *board_string;
};
@@ -71,6 +77,7 @@ void force_emif_self_refresh(void);
void get_ioregs(const struct ctrl_ioregs **regs);
void srcomp_enable(void);
void setup_warmreset_time(void);
+const struct mmc_platform_fixups *platform_fixups_mmc(uint32_t addr);
static inline u32 div_round_up(u32 num, u32 den)
{
diff --git a/arch/arm/include/asm/omap_mmc.h b/arch/arm/include/asm/omap_mmc.h
index bf9de9b211..3d70148882 100644
--- a/arch/arm/include/asm/omap_mmc.h
+++ b/arch/arm/include/asm/omap_mmc.h
@@ -39,7 +39,9 @@ struct hsmmc {
unsigned int sysstatus; /* 0x14 */
unsigned char res2[0x14];
unsigned int con; /* 0x2C */
- unsigned char res3[0xD4];
+ unsigned int pwcnt; /* 0x30 */
+ unsigned int dll; /* 0x34 */
+ unsigned char res3[0xcc];
unsigned int blk; /* 0x104 */
unsigned int arg; /* 0x108 */
unsigned int cmd; /* 0x10C */
@@ -53,9 +55,11 @@ struct hsmmc {
unsigned int sysctl; /* 0x12C */
unsigned int stat; /* 0x130 */
unsigned int ie; /* 0x134 */
- unsigned char res4[0x8];
+ unsigned char res4[0x4];
+ unsigned int ac12; /* 0x13C */
unsigned int capa; /* 0x140 */
- unsigned char res5[0x10];
+ unsigned int capa2; /* 0x144 */
+ unsigned char res5[0xc];
unsigned int admaes; /* 0x154 */
unsigned int admasal; /* 0x158 */
};
@@ -65,6 +69,8 @@ struct omap_hsmmc_plat {
struct hsmmc *base_addr;
struct mmc mmc;
bool cd_inverted;
+ u32 controller_flags;
+ const char *hw_rev;
};
/*
@@ -87,6 +93,7 @@ struct omap_hsmmc_plat {
#define WPP_ACTIVEHIGH (0x0 << 8)
#define RESERVED_MASK (0x3 << 9)
#define CTPL_MMC_SD (0x0 << 11)
+#define DDR (0x1 << 19)
#define DMA_MASTER (0x1 << 20)
#define BLEN_512BYTESLEN (0x200 << 0)
#define NBLK_STPCNT (0x0 << 16)
@@ -124,8 +131,10 @@ struct omap_hsmmc_plat {
#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/
#define SDBP_PWROFF (0x0 << 8)
#define SDBP_PWRON (0x1 << 8)
+#define SDVS_MASK (0x7 << 9)
#define SDVS_1V8 (0x5 << 9)
#define SDVS_3V0 (0x6 << 9)
+#define SDVS_3V3 (0x7 << 9)
#define DMA_SELECT (0x2 << 3)
#define ICE_MASK (0x1 << 0)
#define ICE_STOP (0x0 << 0)
@@ -159,8 +168,20 @@ struct omap_hsmmc_plat {
#define IE_CERR (0x01 << 28)
#define IE_BADA (0x01 << 29)
-#define VS30_3V0SUP (1 << 25)
-#define VS18_1V8SUP (1 << 26)
+#define VS33_3V3SUP BIT(24)
+#define VS30_3V0SUP BIT(25)
+#define VS18_1V8SUP BIT(26)
+
+#define AC12_ET BIT(22)
+#define AC12_V1V8_SIGEN BIT(19)
+#define AC12_SCLK_SEL BIT(23)
+#define AC12_UHSMC_MASK (7 << 16)
+#define AC12_UHSMC_DDR50 (4 << 16)
+#define AC12_UHSMC_SDR104 (3 << 16)
+#define AC12_UHSMC_SDR50 (2 << 16)
+#define AC12_UHSMC_SDR25 (1 << 16)
+#define AC12_UHSMC_SDR12 (0 << 16)
+#define AC12_UHSMC_RES (0x7 << 16)
/* Driver definitions */
#define MMCSD_SECTOR_SIZE 512
@@ -172,15 +193,43 @@ struct omap_hsmmc_plat {
#define CLK_400KHZ 1
#define CLK_MISC 2
+#define CLKD_MAX 0x3FF /* max clock divisor: 1023 */
+
#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK)
#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
/* Clock Configurations and Macros */
+#ifdef CONFIG_OMAP54XX
+#define MMC_CLOCK_REFERENCE 192 /* MHz */
+#else
#define MMC_CLOCK_REFERENCE 96 /* MHz */
+#endif
+
+/* DLL */
+#define DLL_SWT BIT(20)
+#define DLL_FORCE_SR_C_SHIFT 13
+#define DLL_FORCE_SR_C_MASK 0x7f
+#define DLL_FORCE_VALUE BIT(12)
+#define DLL_CALIB BIT(1)
+
+#define MAX_PHASE_DELAY 0x7c
+
+/* CAPA2 */
+#define CAPA2_TSDR50 BIT(13)
#define mmc_reg_out(addr, mask, val)\
writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr))
+#define INT_EN_MASK (IE_BADA | IE_CERR | IE_DEB | IE_DCRC |\
+ IE_DTO | IE_CIE | IE_CEB | IE_CCRC | IE_ADMAE | IE_CTO |\
+ IE_BRR | IE_BWR | IE_TC | IE_CC)
+
+#define CON_CLKEXTFREE BIT(16)
+#define CON_PADEN BIT(15)
+#define PSTATE_CLEV BIT(24)
+#define PSTATE_DLEV (0xF << 20)
+#define PSTATE_DLEV_DAT0 (0x1 << 20)
+
int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
int wp_gpio);
diff --git a/arch/arm/lib/interrupts_64.c b/arch/arm/lib/interrupts_64.c
index cbcfeec2b0..8a5d82468b 100644
--- a/arch/arm/lib/interrupts_64.c
+++ b/arch/arm/lib/interrupts_64.c
@@ -30,13 +30,12 @@ void show_regs(struct pt_regs *regs)
{
int i;
- if (gd->flags & GD_FLG_RELOC) {
- printf("ELR: %lx\n", regs->elr - gd->reloc_off);
- printf("LR: %lx\n", regs->regs[30] - gd->reloc_off);
- } else {
- printf("ELR: %lx\n", regs->elr);
- printf("LR: %lx\n", regs->regs[30]);
- }
+ if (gd->flags & GD_FLG_RELOC)
+ printf("elr: %016lx lr : %016lx (reloc)\n",
+ regs->elr - gd->reloc_off,
+ regs->regs[30] - gd->reloc_off);
+ printf("elr: %016lx lr : %016lx\n", regs->elr, regs->regs[30]);
+
for (i = 0; i < 29; i += 2)
printf("x%-2d: %016lx x%-2d: %016lx\n",
i, regs->regs[i], i+1, regs->regs[i+1]);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index abd1aa7fe1..62c25c4044 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -133,16 +133,6 @@ config SYS_MPUCLK
help
Defines the MPU clock speed (in MHz).
-config TI_SECURE_DEVICE
- bool "HS Device Type Support"
- depends on OMAP54XX || AM43XX || AM33XX || ARCH_KEYSTONE
- help
- If a high secure (HS) device type is being used, this config
- must be set. This option impacts various aspects of the
- build system (to create signed boot images that can be
- authenticated) and the code. See the doc/README.ti-secure
- file for further details.
-
config TI_SECURE_EMIF_REGION_START
hex "Reserved EMIF region start address"
depends on TI_SECURE_DEVICE
diff --git a/arch/arm/mach-omap2/omap5/dra7xx_iodelay.c b/arch/arm/mach-omap2/omap5/dra7xx_iodelay.c
index 87987308ac..a9a9f75e6e 100644
--- a/arch/arm/mach-omap2/omap5/dra7xx_iodelay.c
+++ b/arch/arm/mach-omap2/omap5/dra7xx_iodelay.c
@@ -272,3 +272,33 @@ err:
__recalibrate_iodelay_end(ret);
}
+
+void late_recalibrate_iodelay(struct pad_conf_entry const *pad, int npads,
+ struct iodelay_cfg_entry const *iodelay,
+ int niodelays)
+{
+ int ret = 0;
+
+ /* unlock IODELAY CONFIG registers */
+ writel(CFG_IODELAY_UNLOCK_KEY, (*ctrl)->iodelay_config_base +
+ CFG_REG_8_OFFSET);
+
+ ret = calibrate_iodelay((*ctrl)->iodelay_config_base);
+ if (ret)
+ goto err;
+
+ ret = update_delay_mechanism((*ctrl)->iodelay_config_base);
+
+ /* Configure Mux settings */
+ do_set_mux32((*ctrl)->control_padconf_core_base, pad, npads);
+
+ /* Configure Manual IO timing modes */
+ ret = do_set_iodelay((*ctrl)->iodelay_config_base, iodelay, niodelays);
+ if (ret)
+ goto err;
+
+err:
+ /* lock IODELAY CONFIG registers */
+ writel(CFG_IODELAY_LOCK_KEY, (*ctrl)->iodelay_config_base +
+ CFG_REG_8_OFFSET);
+}
diff --git a/arch/arm/mach-omap2/omap5/hw_data.c b/arch/arm/mach-omap2/omap5/hw_data.c
index bb05e1920b..7fc38368c9 100644
--- a/arch/arm/mach-omap2/omap5/hw_data.c
+++ b/arch/arm/mach-omap2/omap5/hw_data.c
@@ -438,17 +438,17 @@ void enable_basic_clocks(void)
setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl,
GPIO4_CLKCTRL_OPTFCLKEN_MASK);
- /* Enable 96 MHz clock for MMC1 & MMC2 */
+ /* Enable 192 MHz clock for MMC1 & MMC2 */
setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
HSMMC_CLKCTRL_CLKSEL_MASK);
setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
HSMMC_CLKCTRL_CLKSEL_MASK);
/* Set the correct clock dividers for mmc */
- setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
- HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
- setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
- HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
+ clrbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
+ HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
+ clrbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
+ HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
/* Select 32KHz clock as the source of GPTIMER1 */
setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl,
generated by cgit (git 2.34.1) at 2024-12-26 09:35:07 +0000