summaryrefslogtreecommitdiff
path: root/arch/avr32/cpu/at32ap700x/portmux.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/avr32/cpu/at32ap700x/portmux.c')
-rw-r--r--arch/avr32/cpu/at32ap700x/portmux.c294
1 files changed, 294 insertions, 0 deletions
diff --git a/arch/avr32/cpu/at32ap700x/portmux.c b/arch/avr32/cpu/at32ap700x/portmux.c
new file mode 100644
index 0000000000..b1f2c6f1ff
--- /dev/null
+++ b/arch/avr32/cpu/at32ap700x/portmux.c
@@ -0,0 +1,294 @@
+/*
+ * Copyright (C) 2006, 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/chip-features.h>
+#include <asm/arch/memory-map.h>
+#include <asm/arch/portmux.h>
+
+/*
+ * Lots of small functions here. We depend on --gc-sections getting
+ * rid of the ones we don't need.
+ */
+void portmux_enable_ebi(unsigned int bus_width, unsigned int addr_width,
+ unsigned long flags, unsigned long drive_strength)
+{
+ unsigned long porte_mask = 0;
+
+ if (bus_width > 16)
+ portmux_select_peripheral(PORTMUX_PORT_E, 0xffff,
+ PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
+ if (addr_width > 23)
+ porte_mask |= (((1 << (addr_width - 23)) - 1) & 7) << 16;
+ if (flags & PORTMUX_EBI_CS(2))
+ porte_mask |= 1 << 25;
+ if (flags & PORTMUX_EBI_CS(4))
+ porte_mask |= 1 << 21;
+ if (flags & PORTMUX_EBI_CS(5))
+ porte_mask |= 1 << 22;
+ if (flags & (PORTMUX_EBI_CF(0) | PORTMUX_EBI_CF(1)))
+ porte_mask |= (1 << 19) | (1 << 20) | (1 << 23);
+
+ portmux_select_peripheral(PORTMUX_PORT_E, porte_mask,
+ PORTMUX_FUNC_A, 0);
+
+ if (flags & PORTMUX_EBI_NWAIT)
+ portmux_select_peripheral(PORTMUX_PORT_E, 1 << 24,
+ PORTMUX_FUNC_A, PORTMUX_PULL_UP);
+}
+
+#ifdef AT32AP700x_CHIP_HAS_MACB
+void portmux_enable_macb0(unsigned long flags, unsigned long drive_strength)
+{
+ unsigned long portc_mask;
+
+ portc_mask = (1 << 3) /* TXD0 */
+ | (1 << 4) /* TXD1 */
+ | (1 << 7) /* TXEN */
+ | (1 << 8) /* TXCK */
+ | (1 << 9) /* RXD0 */
+ | (1 << 10) /* RXD1 */
+ | (1 << 13) /* RXER */
+ | (1 << 15) /* RXDV */
+ | (1 << 16) /* MDC */
+ | (1 << 17); /* MDIO */
+
+ if (flags & PORTMUX_MACB_MII)
+ portc_mask |= (1 << 0) /* COL */
+ | (1 << 1) /* CRS */
+ | (1 << 2) /* TXER */
+ | (1 << 5) /* TXD2 */
+ | (1 << 6) /* TXD3 */
+ | (1 << 11) /* RXD2 */
+ | (1 << 12) /* RXD3 */
+ | (1 << 14); /* RXCK */
+
+ if (flags & PORTMUX_MACB_SPEED)
+ portc_mask |= (1 << 18);/* SPD */
+
+ /* REVISIT: Some pins are probably pure outputs */
+ portmux_select_peripheral(PORTMUX_PORT_C, portc_mask,
+ PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
+}
+
+void portmux_enable_macb1(unsigned long flags, unsigned long drive_strength)
+{
+ unsigned long portc_mask = 0;
+ unsigned long portd_mask;
+
+ portd_mask = (1 << 13) /* TXD0 */
+ | (1 << 14) /* TXD1 */
+ | (1 << 11) /* TXEN */
+ | (1 << 12) /* TXCK */
+ | (1 << 10) /* RXD0 */
+ | (1 << 6) /* RXD1 */
+ | (1 << 5) /* RXER */
+ | (1 << 4) /* RXDV */
+ | (1 << 3) /* MDC */
+ | (1 << 2); /* MDIO */
+
+ if (flags & PORTMUX_MACB_MII)
+ portc_mask = (1 << 19) /* COL */
+ | (1 << 23) /* CRS */
+ | (1 << 26) /* TXER */
+ | (1 << 27) /* TXD2 */
+ | (1 << 28) /* TXD3 */
+ | (1 << 29) /* RXD2 */
+ | (1 << 30) /* RXD3 */
+ | (1 << 24); /* RXCK */
+
+ if (flags & PORTMUX_MACB_SPEED)
+ portd_mask |= (1 << 15);/* SPD */
+
+ /* REVISIT: Some pins are probably pure outputs */
+ portmux_select_peripheral(PORTMUX_PORT_D, portc_mask,
+ PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
+ portmux_select_peripheral(PORTMUX_PORT_C, portc_mask,
+ PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
+}
+#endif
+
+#ifdef AT32AP700x_CHIP_HAS_MMCI
+void portmux_enable_mmci(unsigned int slot, unsigned long flags,
+ unsigned long drive_strength)
+{
+ unsigned long mask;
+ unsigned long portmux_flags = PORTMUX_PULL_UP;
+
+ /* First, the common CLK signal. It doesn't need a pull-up */
+ portmux_select_peripheral(PORTMUX_PORT_A, 1 << 10,
+ PORTMUX_FUNC_A, 0);
+
+ if (flags & PORTMUX_MMCI_EXT_PULLUP)
+ portmux_flags = 0;
+
+ /* Then, the per-slot signals */
+ switch (slot) {
+ case 0:
+ mask = (1 << 11) | (1 << 12); /* CMD and DATA0 */
+ if (flags & PORTMUX_MMCI_4BIT)
+ /* DATA1..DATA3 */
+ mask |= (1 << 13) | (1 << 14) | (1 << 15);
+ portmux_select_peripheral(PORTMUX_PORT_A, mask,
+ PORTMUX_FUNC_A, portmux_flags);
+ break;
+ case 1:
+ mask = (1 << 6) | (1 << 7); /* CMD and DATA0 */
+ if (flags & PORTMUX_MMCI_4BIT)
+ /* DATA1..DATA3 */
+ mask |= (1 << 8) | (1 << 9) | (1 << 10);
+ portmux_select_peripheral(PORTMUX_PORT_B, mask,
+ PORTMUX_FUNC_B, portmux_flags);
+ break;
+ }
+}
+#endif
+
+#ifdef AT32AP700x_CHIP_HAS_SPI
+void portmux_enable_spi0(unsigned long cs_mask, unsigned long drive_strength)
+{
+ unsigned long pin_mask;
+
+ /* MOSI and SCK */
+ portmux_select_peripheral(PORTMUX_PORT_A, (1 << 1) | (1 << 2),
+ PORTMUX_FUNC_A, 0);
+ /* MISO may float */
+ portmux_select_peripheral(PORTMUX_PORT_A, 1 << 0,
+ PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
+
+ /* Set up NPCSx as GPIO outputs, initially high */
+ pin_mask = (cs_mask & 7) << 3;
+ if (cs_mask & (1 << 3))
+ pin_mask |= 1 << 20;
+
+ portmux_select_gpio(PORTMUX_PORT_A, pin_mask,
+ PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
+}
+
+void portmux_enable_spi1(unsigned long cs_mask, unsigned long drive_strength)
+{
+ /* MOSI and SCK */
+ portmux_select_peripheral(PORTMUX_PORT_B, (1 << 1) | (1 << 5),
+ PORTMUX_FUNC_B, 0);
+ /* MISO may float */
+ portmux_select_peripheral(PORTMUX_PORT_B, 1 << 0,
+ PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
+
+ /* Set up NPCSx as GPIO outputs, initially high */
+ portmux_select_gpio(PORTMUX_PORT_B, (cs_mask & 7) << 2,
+ PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
+ portmux_select_gpio(PORTMUX_PORT_A, (cs_mask & 8) << (27 - 3),
+ PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
+}
+#endif
+
+#ifdef AT32AP700x_CHIP_HAS_LCDC
+void portmux_enable_lcdc(int pin_config)
+{
+ unsigned long portc_mask = 0;
+ unsigned long portd_mask = 0;
+ unsigned long porte_mask = 0;
+
+ switch (pin_config) {
+ case 0:
+ portc_mask = (1 << 19) /* CC */
+ | (1 << 20) /* HSYNC */
+ | (1 << 21) /* PCLK */
+ | (1 << 22) /* VSYNC */
+ | (1 << 23) /* DVAL */
+ | (1 << 24) /* MODE */
+ | (1 << 25) /* PWR */
+ | (1 << 26) /* DATA0 */
+ | (1 << 27) /* DATA1 */
+ | (1 << 28) /* DATA2 */
+ | (1 << 29) /* DATA3 */
+ | (1 << 30) /* DATA4 */
+ | (1 << 31); /* DATA5 */
+
+ portd_mask = (1 << 0) /* DATA6 */
+ | (1 << 1) /* DATA7 */
+ | (1 << 2) /* DATA8 */
+ | (1 << 3) /* DATA9 */
+ | (1 << 4) /* DATA10 */
+ | (1 << 5) /* DATA11 */
+ | (1 << 6) /* DATA12 */
+ | (1 << 7) /* DATA13 */
+ | (1 << 8) /* DATA14 */
+ | (1 << 9) /* DATA15 */
+ | (1 << 10) /* DATA16 */
+ | (1 << 11) /* DATA17 */
+ | (1 << 12) /* DATA18 */
+ | (1 << 13) /* DATA19 */
+ | (1 << 14) /* DATA20 */
+ | (1 << 15) /* DATA21 */
+ | (1 << 16) /* DATA22 */
+ | (1 << 17); /* DATA23 */
+ break;
+
+ case 1:
+ portc_mask = (1 << 20) /* HSYNC */
+ | (1 << 21) /* PCLK */
+ | (1 << 22) /* VSYNC */
+ | (1 << 25) /* PWR */
+ | (1 << 31); /* DATA5 */
+
+ portd_mask = (1 << 0) /* DATA6 */
+ | (1 << 1) /* DATA7 */
+ | (1 << 7) /* DATA13 */
+ | (1 << 8) /* DATA14 */
+ | (1 << 9) /* DATA15 */
+ | (1 << 16) /* DATA22 */
+ | (1 << 17); /* DATA23 */
+
+ porte_mask = (1 << 0) /* CC */
+ | (1 << 1) /* DVAL */
+ | (1 << 2) /* MODE */
+ | (1 << 3) /* DATA0 */
+ | (1 << 4) /* DATA1 */
+ | (1 << 5) /* DATA2 */
+ | (1 << 6) /* DATA3 */
+ | (1 << 7) /* DATA4 */
+ | (1 << 8) /* DATA8 */
+ | (1 << 9) /* DATA9 */
+ | (1 << 10) /* DATA10 */
+ | (1 << 11) /* DATA11 */
+ | (1 << 12) /* DATA12 */
+ | (1 << 13) /* DATA16 */
+ | (1 << 14) /* DATA17 */
+ | (1 << 15) /* DATA18 */
+ | (1 << 16) /* DATA19 */
+ | (1 << 17) /* DATA20 */
+ | (1 << 18); /* DATA21 */
+ break;
+ }
+
+ /* REVISIT: Some pins are probably pure outputs */
+ portmux_select_peripheral(PORTMUX_PORT_C, portc_mask,
+ PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
+ portmux_select_peripheral(PORTMUX_PORT_D, portd_mask,
+ PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
+ portmux_select_peripheral(PORTMUX_PORT_E, porte_mask,
+ PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
+}
+#endif