diff options
Diffstat (limited to 'arch/avr32/cpu/at32ap700x')
| -rw-r--r-- | arch/avr32/cpu/at32ap700x/Makefile | 43 | ||||
| -rw-r--r-- | arch/avr32/cpu/at32ap700x/clk.c | 98 | ||||
| -rw-r--r-- | arch/avr32/cpu/at32ap700x/portmux.c | 294 | ||||
| -rw-r--r-- | arch/avr32/cpu/at32ap700x/sm.h | 204 |
4 files changed, 639 insertions, 0 deletions
diff --git a/arch/avr32/cpu/at32ap700x/Makefile b/arch/avr32/cpu/at32ap700x/Makefile new file mode 100644 index 0000000000..46e6ef661a --- /dev/null +++ b/arch/avr32/cpu/at32ap700x/Makefile @@ -0,0 +1,43 @@ +# +# Copyright (C) 2005-2006 Atmel Corporation +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)lib$(SOC).a + +COBJS := portmux.o clk.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $^ + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/avr32/cpu/at32ap700x/clk.c b/arch/avr32/cpu/at32ap700x/clk.c new file mode 100644 index 0000000000..742bc6b5a2 --- /dev/null +++ b/arch/avr32/cpu/at32ap700x/clk.c @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2005-2008 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> + +#include <asm/io.h> + +#include <asm/arch/clk.h> +#include <asm/arch/memory-map.h> +#include <asm/arch/portmux.h> + +#include "sm.h" + +void clk_init(void) +{ + uint32_t cksel; + + /* in case of soft resets, disable watchdog */ + sm_writel(WDT_CTRL, SM_BF(KEY, 0x55)); + sm_writel(WDT_CTRL, SM_BF(KEY, 0xaa)); + +#ifdef CONFIG_PLL + /* Initialize the PLL */ + sm_writel(PM_PLL0, (SM_BF(PLLCOUNT, CONFIG_SYS_PLL0_SUPPRESS_CYCLES) + | SM_BF(PLLMUL, CONFIG_SYS_PLL0_MUL - 1) + | SM_BF(PLLDIV, CONFIG_SYS_PLL0_DIV - 1) + | SM_BF(PLLOPT, CONFIG_SYS_PLL0_OPT) + | SM_BF(PLLOSC, 0) + | SM_BIT(PLLEN))); + + /* Wait for lock */ + while (!(sm_readl(PM_ISR) & SM_BIT(LOCK0))) ; +#endif + + /* Set up clocks for the CPU and all peripheral buses */ + cksel = 0; + if (CONFIG_SYS_CLKDIV_CPU) + cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CONFIG_SYS_CLKDIV_CPU - 1); + if (CONFIG_SYS_CLKDIV_HSB) + cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CONFIG_SYS_CLKDIV_HSB - 1); + if (CONFIG_SYS_CLKDIV_PBA) + cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CONFIG_SYS_CLKDIV_PBA - 1); + if (CONFIG_SYS_CLKDIV_PBB) + cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CONFIG_SYS_CLKDIV_PBB - 1); + sm_writel(PM_CKSEL, cksel); + +#ifdef CONFIG_PLL + /* Use PLL0 as main clock */ + sm_writel(PM_MCCTRL, SM_BIT(PLLSEL)); + +#ifdef CONFIG_LCD + /* Set up pixel clock for the LCDC */ + sm_writel(PM_GCCTRL(7), SM_BIT(PLLSEL) | SM_BIT(CEN)); +#endif +#endif +} + +unsigned long __gclk_set_rate(unsigned int id, enum gclk_parent parent, + unsigned long rate, unsigned long parent_rate) +{ + unsigned long divider; + + if (rate == 0 || parent_rate == 0) { + sm_writel(PM_GCCTRL(id), 0); + return 0; + } + + divider = (parent_rate + rate / 2) / rate; + if (divider <= 1) { + sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN)); + rate = parent_rate; + } else { + divider = min(255, divider / 2 - 1); + sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN) | SM_BIT(DIVEN) + | SM_BF(DIV, divider)); + rate = parent_rate / (2 * (divider + 1)); + } + + return rate; +} diff --git a/arch/avr32/cpu/at32ap700x/portmux.c b/arch/avr32/cpu/at32ap700x/portmux.c new file mode 100644 index 0000000000..b1f2c6f1ff --- /dev/null +++ b/arch/avr32/cpu/at32ap700x/portmux.c @@ -0,0 +1,294 @@ +/* + * Copyright (C) 2006, 2008 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> + +#include <asm/io.h> + +#include <asm/arch/chip-features.h> +#include <asm/arch/memory-map.h> +#include <asm/arch/portmux.h> + +/* + * Lots of small functions here. We depend on --gc-sections getting + * rid of the ones we don't need. + */ +void portmux_enable_ebi(unsigned int bus_width, unsigned int addr_width, + unsigned long flags, unsigned long drive_strength) +{ + unsigned long porte_mask = 0; + + if (bus_width > 16) + portmux_select_peripheral(PORTMUX_PORT_E, 0xffff, + PORTMUX_FUNC_A, PORTMUX_BUSKEEPER); + if (addr_width > 23) + porte_mask |= (((1 << (addr_width - 23)) - 1) & 7) << 16; + if (flags & PORTMUX_EBI_CS(2)) + porte_mask |= 1 << 25; + if (flags & PORTMUX_EBI_CS(4)) + porte_mask |= 1 << 21; + if (flags & PORTMUX_EBI_CS(5)) + porte_mask |= 1 << 22; + if (flags & (PORTMUX_EBI_CF(0) | PORTMUX_EBI_CF(1))) + porte_mask |= (1 << 19) | (1 << 20) | (1 << 23); + + portmux_select_peripheral(PORTMUX_PORT_E, porte_mask, + PORTMUX_FUNC_A, 0); + + if (flags & PORTMUX_EBI_NWAIT) + portmux_select_peripheral(PORTMUX_PORT_E, 1 << 24, + PORTMUX_FUNC_A, PORTMUX_PULL_UP); +} + +#ifdef AT32AP700x_CHIP_HAS_MACB +void portmux_enable_macb0(unsigned long flags, unsigned long drive_strength) +{ + unsigned long portc_mask; + + portc_mask = (1 << 3) /* TXD0 */ + | (1 << 4) /* TXD1 */ + | (1 << 7) /* TXEN */ + | (1 << 8) /* TXCK */ + | (1 << 9) /* RXD0 */ + | (1 << 10) /* RXD1 */ + | (1 << 13) /* RXER */ + | (1 << 15) /* RXDV */ + | (1 << 16) /* MDC */ + | (1 << 17); /* MDIO */ + + if (flags & PORTMUX_MACB_MII) + portc_mask |= (1 << 0) /* COL */ + | (1 << 1) /* CRS */ + | (1 << 2) /* TXER */ + | (1 << 5) /* TXD2 */ + | (1 << 6) /* TXD3 */ + | (1 << 11) /* RXD2 */ + | (1 << 12) /* RXD3 */ + | (1 << 14); /* RXCK */ + + if (flags & PORTMUX_MACB_SPEED) + portc_mask |= (1 << 18);/* SPD */ + + /* REVISIT: Some pins are probably pure outputs */ + portmux_select_peripheral(PORTMUX_PORT_C, portc_mask, + PORTMUX_FUNC_A, PORTMUX_BUSKEEPER); +} + +void portmux_enable_macb1(unsigned long flags, unsigned long drive_strength) +{ + unsigned long portc_mask = 0; + unsigned long portd_mask; + + portd_mask = (1 << 13) /* TXD0 */ + | (1 << 14) /* TXD1 */ + | (1 << 11) /* TXEN */ + | (1 << 12) /* TXCK */ + | (1 << 10) /* RXD0 */ + | (1 << 6) /* RXD1 */ + | (1 << 5) /* RXER */ + | (1 << 4) /* RXDV */ + | (1 << 3) /* MDC */ + | (1 << 2); /* MDIO */ + + if (flags & PORTMUX_MACB_MII) + portc_mask = (1 << 19) /* COL */ + | (1 << 23) /* CRS */ + | (1 << 26) /* TXER */ + | (1 << 27) /* TXD2 */ + | (1 << 28) /* TXD3 */ + | (1 << 29) /* RXD2 */ + | (1 << 30) /* RXD3 */ + | (1 << 24); /* RXCK */ + + if (flags & PORTMUX_MACB_SPEED) + portd_mask |= (1 << 15);/* SPD */ + + /* REVISIT: Some pins are probably pure outputs */ + portmux_select_peripheral(PORTMUX_PORT_D, portc_mask, + PORTMUX_FUNC_B, PORTMUX_BUSKEEPER); + portmux_select_peripheral(PORTMUX_PORT_C, portc_mask, + PORTMUX_FUNC_B, PORTMUX_BUSKEEPER); +} +#endif + +#ifdef AT32AP700x_CHIP_HAS_MMCI +void portmux_enable_mmci(unsigned int slot, unsigned long flags, + unsigned long drive_strength) +{ + unsigned long mask; + unsigned long portmux_flags = PORTMUX_PULL_UP; + + /* First, the common CLK signal. It doesn't need a pull-up */ + portmux_select_peripheral(PORTMUX_PORT_A, 1 << 10, + PORTMUX_FUNC_A, 0); + + if (flags & PORTMUX_MMCI_EXT_PULLUP) + portmux_flags = 0; + + /* Then, the per-slot signals */ + switch (slot) { + case 0: + mask = (1 << 11) | (1 << 12); /* CMD and DATA0 */ + if (flags & PORTMUX_MMCI_4BIT) + /* DATA1..DATA3 */ + mask |= (1 << 13) | (1 << 14) | (1 << 15); + portmux_select_peripheral(PORTMUX_PORT_A, mask, + PORTMUX_FUNC_A, portmux_flags); + break; + case 1: + mask = (1 << 6) | (1 << 7); /* CMD and DATA0 */ + if (flags & PORTMUX_MMCI_4BIT) + /* DATA1..DATA3 */ + mask |= (1 << 8) | (1 << 9) | (1 << 10); + portmux_select_peripheral(PORTMUX_PORT_B, mask, + PORTMUX_FUNC_B, portmux_flags); + break; + } +} +#endif + +#ifdef AT32AP700x_CHIP_HAS_SPI +void portmux_enable_spi0(unsigned long cs_mask, unsigned long drive_strength) +{ + unsigned long pin_mask; + + /* MOSI and SCK */ + portmux_select_peripheral(PORTMUX_PORT_A, (1 << 1) | (1 << 2), + PORTMUX_FUNC_A, 0); + /* MISO may float */ + portmux_select_peripheral(PORTMUX_PORT_A, 1 << 0, + PORTMUX_FUNC_A, PORTMUX_BUSKEEPER); + + /* Set up NPCSx as GPIO outputs, initially high */ + pin_mask = (cs_mask & 7) << 3; + if (cs_mask & (1 << 3)) + pin_mask |= 1 << 20; + + portmux_select_gpio(PORTMUX_PORT_A, pin_mask, + PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH); +} + +void portmux_enable_spi1(unsigned long cs_mask, unsigned long drive_strength) +{ + /* MOSI and SCK */ + portmux_select_peripheral(PORTMUX_PORT_B, (1 << 1) | (1 << 5), + PORTMUX_FUNC_B, 0); + /* MISO may float */ + portmux_select_peripheral(PORTMUX_PORT_B, 1 << 0, + PORTMUX_FUNC_B, PORTMUX_BUSKEEPER); + + /* Set up NPCSx as GPIO outputs, initially high */ + portmux_select_gpio(PORTMUX_PORT_B, (cs_mask & 7) << 2, + PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH); + portmux_select_gpio(PORTMUX_PORT_A, (cs_mask & 8) << (27 - 3), + PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH); +} +#endif + +#ifdef AT32AP700x_CHIP_HAS_LCDC +void portmux_enable_lcdc(int pin_config) +{ + unsigned long portc_mask = 0; + unsigned long portd_mask = 0; + unsigned long porte_mask = 0; + + switch (pin_config) { + case 0: + portc_mask = (1 << 19) /* CC */ + | (1 << 20) /* HSYNC */ + | (1 << 21) /* PCLK */ + | (1 << 22) /* VSYNC */ + | (1 << 23) /* DVAL */ + | (1 << 24) /* MODE */ + | (1 << 25) /* PWR */ + | (1 << 26) /* DATA0 */ + | (1 << 27) /* DATA1 */ + | (1 << 28) /* DATA2 */ + | (1 << 29) /* DATA3 */ + | (1 << 30) /* DATA4 */ + | (1 << 31); /* DATA5 */ + + portd_mask = (1 << 0) /* DATA6 */ + | (1 << 1) /* DATA7 */ + | (1 << 2) /* DATA8 */ + | (1 << 3) /* DATA9 */ + | (1 << 4) /* DATA10 */ + | (1 << 5) /* DATA11 */ + | (1 << 6) /* DATA12 */ + | (1 << 7) /* DATA13 */ + | (1 << 8) /* DATA14 */ + | (1 << 9) /* DATA15 */ + | (1 << 10) /* DATA16 */ + | (1 << 11) /* DATA17 */ + | (1 << 12) /* DATA18 */ + | (1 << 13) /* DATA19 */ + | (1 << 14) /* DATA20 */ + | (1 << 15) /* DATA21 */ + | (1 << 16) /* DATA22 */ + | (1 << 17); /* DATA23 */ + break; + + case 1: + portc_mask = (1 << 20) /* HSYNC */ + | (1 << 21) /* PCLK */ + | (1 << 22) /* VSYNC */ + | (1 << 25) /* PWR */ + | (1 << 31); /* DATA5 */ + + portd_mask = (1 << 0) /* DATA6 */ + | (1 << 1) /* DATA7 */ + | (1 << 7) /* DATA13 */ + | (1 << 8) /* DATA14 */ + | (1 << 9) /* DATA15 */ + | (1 << 16) /* DATA22 */ + | (1 << 17); /* DATA23 */ + + porte_mask = (1 << 0) /* CC */ + | (1 << 1) /* DVAL */ + | (1 << 2) /* MODE */ + | (1 << 3) /* DATA0 */ + | (1 << 4) /* DATA1 */ + | (1 << 5) /* DATA2 */ + | (1 << 6) /* DATA3 */ + | (1 << 7) /* DATA4 */ + | (1 << 8) /* DATA8 */ + | (1 << 9) /* DATA9 */ + | (1 << 10) /* DATA10 */ + | (1 << 11) /* DATA11 */ + | (1 << 12) /* DATA12 */ + | (1 << 13) /* DATA16 */ + | (1 << 14) /* DATA17 */ + | (1 << 15) /* DATA18 */ + | (1 << 16) /* DATA19 */ + | (1 << 17) /* DATA20 */ + | (1 << 18); /* DATA21 */ + break; + } + + /* REVISIT: Some pins are probably pure outputs */ + portmux_select_peripheral(PORTMUX_PORT_C, portc_mask, + PORTMUX_FUNC_A, PORTMUX_BUSKEEPER); + portmux_select_peripheral(PORTMUX_PORT_D, portd_mask, + PORTMUX_FUNC_A, PORTMUX_BUSKEEPER); + portmux_select_peripheral(PORTMUX_PORT_E, porte_mask, + PORTMUX_FUNC_B, PORTMUX_BUSKEEPER); +} +#endif diff --git a/arch/avr32/cpu/at32ap700x/sm.h b/arch/avr32/cpu/at32ap700x/sm.h new file mode 100644 index 0000000000..b6e4409b22 --- /dev/null +++ b/arch/avr32/cpu/at32ap700x/sm.h @@ -0,0 +1,204 @@ +/* + * Register definitions for System Manager + */ +#ifndef __CPU_AT32AP_SM_H__ +#define __CPU_AT32AP_SM_H__ + +/* SM register offsets */ +#define SM_PM_MCCTRL 0x0000 +#define SM_PM_CKSEL 0x0004 +#define SM_PM_CPU_MASK 0x0008 +#define SM_PM_HSB_MASK 0x000c +#define SM_PM_PBA_MASK 0x0010 +#define SM_PM_PBB_MASK 0x0014 +#define SM_PM_PLL0 0x0020 +#define SM_PM_PLL1 0x0024 +#define SM_PM_VCTRL 0x0030 +#define SM_PM_VMREF 0x0034 +#define SM_PM_VMV 0x0038 +#define SM_PM_IER 0x0040 +#define SM_PM_IDR 0x0044 +#define SM_PM_IMR 0x0048 +#define SM_PM_ISR 0x004c +#define SM_PM_ICR 0x0050 +#define SM_PM_GCCTRL(x) (0x0060 + 4 * x) +#define SM_RTC_CTRL 0x0080 +#define SM_RTC_VAL 0x0084 +#define SM_RTC_TOP 0x0088 +#define SM_RTC_IER 0x0090 +#define SM_RTC_IDR 0x0094 +#define SM_RTC_IMR 0x0098 +#define SM_RTC_ISR 0x009c +#define SM_RTC_ICR 0x00a0 +#define SM_WDT_CTRL 0x00b0 +#define SM_WDT_CLR 0x00b4 +#define SM_WDT_EXT 0x00b8 +#define SM_RC_RCAUSE 0x00c0 +#define SM_EIM_IER 0x0100 +#define SM_EIM_IDR 0x0104 +#define SM_EIM_IMR 0x0108 +#define SM_EIM_ISR 0x010c +#define SM_EIM_ICR 0x0110 +#define SM_EIM_MODE 0x0114 +#define SM_EIM_EDGE 0x0118 +#define SM_EIM_LEVEL 0x011c +#define SM_EIM_TEST 0x0120 +#define SM_EIM_NMIC 0x0124 + +/* Bitfields in PM_CKSEL */ +#define SM_CPUSEL_OFFSET 0 +#define SM_CPUSEL_SIZE 3 +#define SM_CPUDIV_OFFSET 7 +#define SM_CPUDIV_SIZE 1 +#define SM_HSBSEL_OFFSET 8 +#define SM_HSBSEL_SIZE 3 +#define SM_HSBDIV_OFFSET 15 +#define SM_HSBDIV_SIZE 1 +#define SM_PBASEL_OFFSET 16 +#define SM_PBASEL_SIZE 3 +#define SM_PBADIV_OFFSET 23 +#define SM_PBADIV_SIZE 1 +#define SM_PBBSEL_OFFSET 24 +#define SM_PBBSEL_SIZE 3 +#define SM_PBBDIV_OFFSET 31 +#define SM_PBBDIV_SIZE 1 + +/* Bitfields in PM_PLL0 */ +#define SM_PLLEN_OFFSET 0 +#define SM_PLLEN_SIZE 1 +#define SM_PLLOSC_OFFSET 1 +#define SM_PLLOSC_SIZE 1 +#define SM_PLLOPT_OFFSET 2 +#define SM_PLLOPT_SIZE 3 +#define SM_PLLDIV_OFFSET 8 +#define SM_PLLDIV_SIZE 8 +#define SM_PLLMUL_OFFSET 16 +#define SM_PLLMUL_SIZE 8 +#define SM_PLLCOUNT_OFFSET 24 +#define SM_PLLCOUNT_SIZE 6 +#define SM_PLLTEST_OFFSET 31 +#define SM_PLLTEST_SIZE 1 + +/* Bitfields in PM_VCTRL */ +#define SM_VAUTO_OFFSET 0 +#define SM_VAUTO_SIZE 1 +#define SM_PM_VCTRL_VAL_OFFSET 8 +#define SM_PM_VCTRL_VAL_SIZE 7 + +/* Bitfields in PM_VMREF */ +#define SM_REFSEL_OFFSET 0 +#define SM_REFSEL_SIZE 4 + +/* Bitfields in PM_VMV */ +#define SM_PM_VMV_VAL_OFFSET 0 +#define SM_PM_VMV_VAL_SIZE 8 + +/* Bitfields in PM_ICR */ +#define SM_LOCK0_OFFSET 0 +#define SM_LOCK0_SIZE 1 +#define SM_LOCK1_OFFSET 1 +#define SM_LOCK1_SIZE 1 +#define SM_WAKE_OFFSET 2 +#define SM_WAKE_SIZE 1 +#define SM_VOK_OFFSET 3 +#define SM_VOK_SIZE 1 +#define SM_VMRDY_OFFSET 4 +#define SM_VMRDY_SIZE 1 +#define SM_CKRDY_OFFSET 5 +#define SM_CKRDY_SIZE 1 + +/* Bitfields in PM_GCCTRL */ +#define SM_OSCSEL_OFFSET 0 +#define SM_OSCSEL_SIZE 1 +#define SM_PLLSEL_OFFSET 1 +#define SM_PLLSEL_SIZE 1 +#define SM_CEN_OFFSET 2 +#define SM_CEN_SIZE 1 +#define SM_CPC_OFFSET 3 +#define SM_CPC_SIZE 1 +#define SM_DIVEN_OFFSET 4 +#define SM_DIVEN_SIZE 1 +#define SM_DIV_OFFSET 8 +#define SM_DIV_SIZE 8 + +/* Bitfields in RTC_CTRL */ +#define SM_PCLR_OFFSET 1 +#define SM_PCLR_SIZE 1 +#define SM_TOPEN_OFFSET 2 +#define SM_TOPEN_SIZE 1 +#define SM_CLKEN_OFFSET 3 +#define SM_CLKEN_SIZE 1 +#define SM_PSEL_OFFSET 8 +#define SM_PSEL_SIZE 16 + +/* Bitfields in RTC_VAL */ +#define SM_RTC_VAL_VAL_OFFSET 0 +#define SM_RTC_VAL_VAL_SIZE 31 + +/* Bitfields in RTC_TOP */ +#define SM_RTC_TOP_VAL_OFFSET 0 +#define SM_RTC_TOP_VAL_SIZE 32 + +/* Bitfields in RTC_ICR */ +#define SM_TOPI_OFFSET 0 +#define SM_TOPI_SIZE 1 + +/* Bitfields in WDT_CTRL */ +#define SM_KEY_OFFSET 24 +#define SM_KEY_SIZE 8 + +/* Bitfields in RC_RCAUSE */ +#define SM_POR_OFFSET 0 +#define SM_POR_SIZE 1 +#define SM_BOD_OFFSET 1 +#define SM_BOD_SIZE 1 +#define SM_EXT_OFFSET 2 +#define SM_EXT_SIZE 1 +#define SM_WDT_OFFSET 3 +#define SM_WDT_SIZE 1 +#define SM_NTAE_OFFSET 4 +#define SM_NTAE_SIZE 1 +#define SM_SERP_OFFSET 5 +#define SM_SERP_SIZE 1 + +/* Bitfields in EIM_EDGE */ +#define SM_INT0_OFFSET 0 +#define SM_INT0_SIZE 1 +#define SM_INT1_OFFSET 1 +#define SM_INT1_SIZE 1 +#define SM_INT2_OFFSET 2 +#define SM_INT2_SIZE 1 +#define SM_INT3_OFFSET 3 +#define SM_INT3_SIZE 1 + +/* Bitfields in EIM_LEVEL */ + +/* Bitfields in EIM_TEST */ +#define SM_TESTEN_OFFSET 31 +#define SM_TESTEN_SIZE 1 + +/* Bitfields in EIM_NMIC */ +#define SM_EN_OFFSET 0 +#define SM_EN_SIZE 1 + +/* Bit manipulation macros */ +#define SM_BIT(name) \ + (1 << SM_##name##_OFFSET) +#define SM_BF(name,value) \ + (((value) & ((1 << SM_##name##_SIZE) - 1)) \ + << SM_##name##_OFFSET) +#define SM_BFEXT(name,value) \ + (((value) >> SM_##name##_OFFSET) \ + & ((1 << SM_##name##_SIZE) - 1)) +#define SM_BFINS(name,value,old) \ + (((old) & ~(((1 << SM_##name##_SIZE) - 1) \ + << SM_##name##_OFFSET)) \ + | SM_BF(name,value)) + +/* Register access macros */ +#define sm_readl(reg) \ + readl((void *)SM_BASE + SM_##reg) +#define sm_writel(reg,value) \ + writel((value), (void *)SM_BASE + SM_##reg) + +#endif /* __CPU_AT32AP_SM_H__ */ |