diff options
Diffstat (limited to 'arch/mips/cpu/mips64/cache.S')
| -rw-r--r-- | arch/mips/cpu/mips64/cache.S | 213 |
1 files changed, 0 insertions, 213 deletions
diff --git a/arch/mips/cpu/mips64/cache.S b/arch/mips/cpu/mips64/cache.S deleted file mode 100644 index 36d868818a..0000000000 --- a/arch/mips/cpu/mips64/cache.S +++ /dev/null @@ -1,213 +0,0 @@ -/* - * Cache-handling routined for MIPS CPUs - * - * Copyright (c) 2003 Wolfgang Denk <wd@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm-offsets.h> -#include <config.h> -#include <asm/asm.h> -#include <asm/regdef.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> -#include <asm/cacheops.h> - -#define RA t9 - -/* - * 16kB is the maximum size of instruction and data caches on MIPS 4K, - * 64kB is on 4KE, 24K, 5K, etc. Set bigger size for convenience. - * - * Note that the above size is the maximum size of primary cache. U-Boot - * doesn't have L2 cache support for now. - */ -#define MIPS_MAX_CACHE_SIZE 0x10000 - -#define INDEX_BASE CKSEG0 - - .macro cache_op op addr - .set push - .set noreorder - .set mips3 - cache \op, 0(\addr) - .set pop - .endm - - .macro f_fill64 dst, offset, val - LONG_S \val, (\offset + 0 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 1 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 2 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 3 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 4 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 5 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 6 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 7 * LONGSIZE)(\dst) -#if LONGSIZE == 4 - LONG_S \val, (\offset + 8 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 9 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 10 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 11 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 12 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 13 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 14 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 15 * LONGSIZE)(\dst) -#endif - .endm - -/* - * mips_init_icache(uint PRId, ulong icache_size, unchar icache_linesz) - */ -LEAF(mips_init_icache) - blez a1, 9f - mtc0 zero, CP0_TAGLO - /* clear tag to invalidate */ - PTR_LI t0, INDEX_BASE - PTR_ADDU t1, t0, a1 -1: cache_op INDEX_STORE_TAG_I t0 - PTR_ADDU t0, a2 - bne t0, t1, 1b - /* fill once, so data field parity is correct */ - PTR_LI t0, INDEX_BASE -2: cache_op FILL t0 - PTR_ADDU t0, a2 - bne t0, t1, 2b - /* invalidate again - prudent but not strictly neccessary */ - PTR_LI t0, INDEX_BASE -1: cache_op INDEX_STORE_TAG_I t0 - PTR_ADDU t0, a2 - bne t0, t1, 1b -9: jr ra - END(mips_init_icache) - -/* - * mips_init_dcache(uint PRId, ulong dcache_size, unchar dcache_linesz) - */ -LEAF(mips_init_dcache) - blez a1, 9f - mtc0 zero, CP0_TAGLO - /* clear all tags */ - PTR_LI t0, INDEX_BASE - PTR_ADDU t1, t0, a1 -1: cache_op INDEX_STORE_TAG_D t0 - PTR_ADDU t0, a2 - bne t0, t1, 1b - /* load from each line (in cached space) */ - PTR_LI t0, INDEX_BASE -2: LONG_L zero, 0(t0) - PTR_ADDU t0, a2 - bne t0, t1, 2b - /* clear all tags */ - PTR_LI t0, INDEX_BASE -1: cache_op INDEX_STORE_TAG_D t0 - PTR_ADDU t0, a2 - bne t0, t1, 1b -9: jr ra - END(mips_init_dcache) - -/* - * mips_cache_reset - low level initialisation of the primary caches - * - * This routine initialises the primary caches to ensure that they have good - * parity. It must be called by the ROM before any cached locations are used - * to prevent the possibility of data with bad parity being written to memory. - * - * To initialise the instruction cache it is essential that a source of data - * with good parity is available. This routine will initialise an area of - * memory starting at location zero to be used as a source of parity. - * - * RETURNS: N/A - * - */ -NESTED(mips_cache_reset, 0, ra) - move RA, ra - li t2, CONFIG_SYS_ICACHE_SIZE - li t3, CONFIG_SYS_DCACHE_SIZE - li t8, CONFIG_SYS_CACHELINE_SIZE - - li v0, MIPS_MAX_CACHE_SIZE - - /* - * Now clear that much memory starting from zero. - */ - PTR_LI a0, CKSEG1 - PTR_ADDU a1, a0, v0 -2: PTR_ADDIU a0, 64 - f_fill64 a0, -64, zero - bne a0, a1, 2b - - /* - * The caches are probably in an indeterminate state, - * so we force good parity into them by doing an - * invalidate, load/fill, invalidate for each line. - */ - - /* - * Assume bottom of RAM will generate good parity for the cache. - */ - - /* - * Initialize the I-cache first, - */ - move a1, t2 - move a2, t8 - PTR_LA v1, mips_init_icache - jalr v1 - - /* - * then initialize D-cache. - */ - move a1, t3 - move a2, t8 - PTR_LA v1, mips_init_dcache - jalr v1 - - jr RA - END(mips_cache_reset) - -/* - * dcache_status - get cache status - * - * RETURNS: 0 - cache disabled; 1 - cache enabled - * - */ -LEAF(dcache_status) - mfc0 t0, CP0_CONFIG - li t1, CONF_CM_UNCACHED - andi t0, t0, CONF_CM_CMASK - move v0, zero - beq t0, t1, 2f - li v0, 1 -2: jr ra - END(dcache_status) - -/* - * dcache_disable - disable cache - * - * RETURNS: N/A - * - */ -LEAF(dcache_disable) - mfc0 t0, CP0_CONFIG - li t1, -8 - and t0, t0, t1 - ori t0, t0, CONF_CM_UNCACHED - mtc0 t0, CP0_CONFIG - jr ra - END(dcache_disable) - -/* - * dcache_enable - enable cache - * - * RETURNS: N/A - * - */ -LEAF(dcache_enable) - mfc0 t0, CP0_CONFIG - ori t0, CONF_CM_CMASK - xori t0, CONF_CM_CMASK - ori t0, CONF_CM_CACHABLE_NONCOHERENT - mtc0 t0, CP0_CONFIG - jr ra - END(dcache_enable) |