diff options
Diffstat (limited to 'arch/mips/include/asm/io.h')
| -rw-r--r-- | arch/mips/include/asm/io.h | 82 |
1 files changed, 27 insertions, 55 deletions
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index f71e34231b..723a60a199 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -26,11 +26,6 @@ #include <spaces.h> /* - * Slowdown I/O port space accesses for antique hardware. - */ -#undef CONF_SLOWDOWN_IO - -/* * Raw operations are never swapped in software. OTOH values that raw * operations are working on may or may not have been swapped by the bus * hardware. An example use would be for flash memory that's used for @@ -46,57 +41,36 @@ #define IO_SPACE_LIMIT 0xffff -/* - * On MIPS I/O ports are memory mapped, so we access them using normal - * load/store instructions. mips_io_port_base is the virtual address to - * which all ports are being mapped. For sake of efficiency some code - * assumes that this is an address that can be loaded with a single lui - * instruction, so the lower 16 bits must be zero. Should be true on - * on any sane architecture; generic code does not use this assumption. - */ -extern const unsigned long mips_io_port_base; +#ifdef CONFIG_DYNAMIC_IO_PORT_BASE + +static inline ulong mips_io_port_base(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + return gd->arch.io_port_base; +} -/* - * Gcc will generate code to load the value of mips_io_port_base after each - * function call which may be fairly wasteful in some cases. So we don't - * play quite by the book. We tell gcc mips_io_port_base is a long variable - * which solves the code generation issue. Now we need to violate the - * aliasing rules a little to make initialization possible and finally we - * will need the barrier() to fight side effects of the aliasing chat. - * This trickery will eventually collapse under gcc's optimizer. Oh well. - */ static inline void set_io_port_base(unsigned long base) { - * (unsigned long *) &mips_io_port_base = base; + DECLARE_GLOBAL_DATA_PTR; + + gd->arch.io_port_base = base; barrier(); } -/* - * Thanks to James van Artsdalen for a better timing-fix than - * the two short jumps: using outb's to a nonexistent port seems - * to guarantee better timings even on fast machines. - * - * On the other hand, I'd like to be sure of a non-existent port: - * I feel a bit unsafe about using 0x80 (should be safe, though) - * - * Linus - * - */ +#else /* !CONFIG_DYNAMIC_IO_PORT_BASE */ -#define __SLOW_DOWN_IO \ - __asm__ __volatile__( \ - "sb\t$0,0x80(%0)" \ - : : "r" (mips_io_port_base)); +static inline ulong mips_io_port_base(void) +{ + return 0; +} -#ifdef CONF_SLOWDOWN_IO -#ifdef REALLY_SLOW_IO -#define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; } -#else -#define SLOW_DOWN_IO __SLOW_DOWN_IO -#endif -#else -#define SLOW_DOWN_IO -#endif +static inline void set_io_port_base(unsigned long base) +{ + BUG_ON(base); +} + +#endif /* !CONFIG_DYNAMIC_IO_PORT_BASE */ /* * virt_to_phys - map virtual addresses to physical @@ -316,7 +290,7 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem) \ return pfx##ioswab##bwlq(__mem, __val); \ } -#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow) \ +#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p) \ \ static inline void pfx##out##bwlq##p(type val, unsigned long port) \ { \ @@ -325,7 +299,7 @@ static inline void pfx##out##bwlq##p(type val, unsigned long port) \ \ war_octeon_io_reorder_wmb(); \ \ - __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \ + __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base() + port); \ \ __val = pfx##ioswab##bwlq(__addr, val); \ \ @@ -333,7 +307,6 @@ static inline void pfx##out##bwlq##p(type val, unsigned long port) \ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ \ *__addr = __val; \ - slow; \ } \ \ static inline type pfx##in##bwlq##p(unsigned long port) \ @@ -341,12 +314,11 @@ static inline type pfx##in##bwlq##p(unsigned long port) \ volatile type *__addr; \ type __val; \ \ - __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \ + __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base() + port); \ \ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ \ __val = *__addr; \ - slow; \ \ return pfx##ioswab##bwlq(__addr, __val); \ } @@ -367,8 +339,8 @@ BUILDIO_MEM(l, u32) BUILDIO_MEM(q, u64) #define __BUILD_IOPORT_PFX(bus, bwlq, type) \ - __BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \ - __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO) + __BUILD_IOPORT_SINGLE(bus, bwlq, type, ) \ + __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p) #define BUILDIO_IOPORT(bwlq, type) \ __BUILD_IOPORT_PFX(, bwlq, type) \ |