diff options
Diffstat (limited to 'arch/powerpc/cpu/mpc8260/ether_scc.c')
-rw-r--r-- | arch/powerpc/cpu/mpc8260/ether_scc.c | 367 |
1 files changed, 0 insertions, 367 deletions
diff --git a/arch/powerpc/cpu/mpc8260/ether_scc.c b/arch/powerpc/cpu/mpc8260/ether_scc.c deleted file mode 100644 index fff8f2b8d3..0000000000 --- a/arch/powerpc/cpu/mpc8260/ether_scc.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * MPC8260 SCC Ethernet - * - * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net) - * - * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright (c) 2001 - * Advent Networks, Inc. <http://www.adventnetworks.com> - * Jay Monkman <jtm@smoothsmoothie.com> - * - * Modified so that it plays nicely when more than one ETHERNET interface - * is in use a la ether_fcc.c. - * (C) Copyright 2008 - * DENX Software Engineerin GmbH - * Gary Jennejohn <garyj@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/cpm_8260.h> -#include <mpc8260.h> -#include <malloc.h> -#include <net.h> -#include <command.h> -#include <config.h> - -#if (CONFIG_ETHER_INDEX == 1) -# define PROFF_ENET PROFF_SCC1 -# define CPM_CR_ENET_PAGE CPM_CR_SCC1_PAGE -# define CPM_CR_ENET_SBLOCK CPM_CR_SCC1_SBLOCK -# define CMXSCR_MASK (CMXSCR_SC1 |\ - CMXSCR_RS1CS_MSK |\ - CMXSCR_TS1CS_MSK) - -#elif (CONFIG_ETHER_INDEX == 2) -# define PROFF_ENET PROFF_SCC2 -# define CPM_CR_ENET_PAGE CPM_CR_SCC2_PAGE -# define CPM_CR_ENET_SBLOCK CPM_CR_SCC2_SBLOCK -# define CMXSCR_MASK (CMXSCR_SC2 |\ - CMXSCR_RS2CS_MSK |\ - CMXSCR_TS2CS_MSK) - -#elif (CONFIG_ETHER_INDEX == 3) -# define PROFF_ENET PROFF_SCC3 -# define CPM_CR_ENET_PAGE CPM_CR_SCC3_PAGE -# define CPM_CR_ENET_SBLOCK CPM_CR_SCC3_SBLOCK -# define CMXSCR_MASK (CMXSCR_SC3 |\ - CMXSCR_RS3CS_MSK |\ - CMXSCR_TS3CS_MSK) -#elif (CONFIG_ETHER_INDEX == 4) -# define PROFF_ENET PROFF_SCC4 -# define CPM_CR_ENET_PAGE CPM_CR_SCC4_PAGE -# define CPM_CR_ENET_SBLOCK CPM_CR_SCC4_SBLOCK -# define CMXSCR_MASK (CMXSCR_SC4 |\ - CMXSCR_RS4CS_MSK |\ - CMXSCR_TS4CS_MSK) - -#endif - - -/* Ethernet Transmit and Receive Buffers */ -#define DBUF_LENGTH 1520 - -#define TX_BUF_CNT 2 - -#if !defined(CONFIG_SYS_SCC_TOUT_LOOP) - #define CONFIG_SYS_SCC_TOUT_LOOP 1000000 -#endif - -static char txbuf[TX_BUF_CNT][ DBUF_LENGTH ]; - -static uint rxIdx; /* index of the current RX buffer */ -static uint txIdx; /* index of the current TX buffer */ - -/* - * SCC Ethernet Tx and Rx buffer descriptors allocated at the - * immr->udata_bd address on Dual-Port RAM - * Provide for Double Buffering - */ - -typedef volatile struct CommonBufferDescriptor { - cbd_t rxbd[PKTBUFSRX]; /* Rx BD */ - cbd_t txbd[TX_BUF_CNT]; /* Tx BD */ -} RTXBD; - -static RTXBD *rtx; - - -static int sec_send(struct eth_device *dev, void *packet, int length) -{ - int i; - int result = 0; - - if (length <= 0) { - printf("scc: bad packet size: %d\n", length); - goto out; - } - - for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) { - if (i >= CONFIG_SYS_SCC_TOUT_LOOP) { - puts ("scc: tx buffer not ready\n"); - goto out; - } - } - - rtx->txbd[txIdx].cbd_bufaddr = (uint)packet; - rtx->txbd[txIdx].cbd_datlen = length; - rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST | - BD_ENET_TX_WRAP); - - for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) { - if (i >= CONFIG_SYS_SCC_TOUT_LOOP) { - puts ("scc: tx error\n"); - goto out; - } - } - - /* return only status bits */ - result = rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS; - - out: - return result; -} - - -static int sec_rx(struct eth_device *dev) -{ - int length; - - for (;;) - { - if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { - length = -1; - break; /* nothing received - leave for() loop */ - } - - length = rtx->rxbd[rxIdx].cbd_datlen; - - if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) - { - printf("err: %x\n", rtx->rxbd[rxIdx].cbd_sc); - } - else - { - /* Pass the packet up to the protocol layers. */ - net_process_received_packet(net_rx_packets[rxIdx], length - 4); - } - - - /* Give the buffer back to the SCC. */ - rtx->rxbd[rxIdx].cbd_datlen = 0; - - /* wrap around buffer index when necessary */ - if ((rxIdx + 1) >= PKTBUFSRX) { - rtx->rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | - BD_ENET_RX_EMPTY); - rxIdx = 0; - } - else { - rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY; - rxIdx++; - } - } - return length; -} - -/************************************************************** - * - * SCC Ethernet Initialization Routine - * - *************************************************************/ - -static int sec_init(struct eth_device *dev, bd_t *bis) -{ - int i; - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - scc_enet_t *pram_ptr; - uint dpaddr; - uchar ea[6]; - - rxIdx = 0; - txIdx = 0; - - /* - * Assign static pointer to BD area. - * Avoid exhausting DPRAM, which would cause a panic. - */ - if (rtx == NULL) { - dpaddr = m8260_cpm_dpalloc(sizeof(RTXBD) + 2, 16); - rtx = (RTXBD *)&immr->im_dprambase[dpaddr]; - } - - /* 24.21 - (1-3): ioports have been set up already */ - - /* 24.21 - (4,5): connect SCC's tx and rx clocks, use NMSI for SCC */ - immr->im_cpmux.cmx_uar = 0; - immr->im_cpmux.cmx_scr = ( (immr->im_cpmux.cmx_scr & ~CMXSCR_MASK) | - CONFIG_SYS_CMXSCR_VALUE); - - - /* 24.21 (6) write RBASE and TBASE to parameter RAM */ - pram_ptr = (scc_enet_t *)&(immr->im_dprambase[PROFF_ENET]); - pram_ptr->sen_genscc.scc_rbase = (unsigned int)(&rtx->rxbd[0]); - pram_ptr->sen_genscc.scc_tbase = (unsigned int)(&rtx->txbd[0]); - - pram_ptr->sen_genscc.scc_rfcr = 0x18; /* Nrml Ops and Mot byte ordering */ - pram_ptr->sen_genscc.scc_tfcr = 0x18; /* Mot byte ordering, Nrml access */ - - pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH; /* max. package len 1520 */ - - pram_ptr->sen_cpres = ~(0x0); /* Preset CRC */ - pram_ptr->sen_cmask = 0xdebb20e3; /* Constant Mask for CRC */ - - - /* 24.21 - (7): Write INIT RX AND TX PARAMETERS to CPCR */ - while(immr->im_cpm.cp_cpcr & CPM_CR_FLG); - immr->im_cpm.cp_cpcr = mk_cr_cmd(CPM_CR_ENET_PAGE, - CPM_CR_ENET_SBLOCK, - 0x0c, - CPM_CR_INIT_TRX) | CPM_CR_FLG; - - /* 24.21 - (8-18): Set up parameter RAM */ - pram_ptr->sen_crcec = 0x0; /* Error Counter CRC (unused) */ - pram_ptr->sen_alec = 0x0; /* Align Error Counter (unused) */ - pram_ptr->sen_disfc = 0x0; /* Discard Frame Counter (unused) */ - - pram_ptr->sen_pads = 0x8888; /* Short Frame PAD Characters */ - - pram_ptr->sen_retlim = 15; /* Retry Limit Threshold */ - - pram_ptr->sen_maxflr = 1518; /* MAX Frame Length Register */ - pram_ptr->sen_minflr = 64; /* MIN Frame Length Register */ - - pram_ptr->sen_maxd1 = DBUF_LENGTH; /* MAX DMA1 Length Register */ - pram_ptr->sen_maxd2 = DBUF_LENGTH; /* MAX DMA2 Length Register */ - - pram_ptr->sen_gaddr1 = 0x0; /* Group Address Filter 1 (unused) */ - pram_ptr->sen_gaddr2 = 0x0; /* Group Address Filter 2 (unused) */ - pram_ptr->sen_gaddr3 = 0x0; /* Group Address Filter 3 (unused) */ - pram_ptr->sen_gaddr4 = 0x0; /* Group Address Filter 4 (unused) */ - - eth_getenv_enetaddr("ethaddr", ea); - pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4]; - pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2]; - pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0]; - - pram_ptr->sen_pper = 0x0; /* Persistence (unused) */ - - pram_ptr->sen_iaddr1 = 0x0; /* Individual Address Filter 1 (unused) */ - pram_ptr->sen_iaddr2 = 0x0; /* Individual Address Filter 2 (unused) */ - pram_ptr->sen_iaddr3 = 0x0; /* Individual Address Filter 3 (unused) */ - pram_ptr->sen_iaddr4 = 0x0; /* Individual Address Filter 4 (unused) */ - - pram_ptr->sen_taddrh = 0x0; /* Tmp Address (MSB) (unused) */ - pram_ptr->sen_taddrm = 0x0; /* Tmp Address (unused) */ - pram_ptr->sen_taddrl = 0x0; /* Tmp Address (LSB) (unused) */ - - /* 24.21 - (19): Initialize RxBD */ - for (i = 0; i < PKTBUFSRX; i++) - { - rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; - rtx->rxbd[i].cbd_datlen = 0; /* Reset */ - rtx->rxbd[i].cbd_bufaddr = (uint)net_rx_packets[i]; - } - - rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; - - /* 24.21 - (20): Initialize TxBD */ - for (i = 0; i < TX_BUF_CNT; i++) - { - rtx->txbd[i].cbd_sc = (BD_ENET_TX_PAD | - BD_ENET_TX_LAST | - BD_ENET_TX_TC); - rtx->txbd[i].cbd_datlen = 0; /* Reset */ - rtx->txbd[i].cbd_bufaddr = (uint)&txbuf[i][0]; - } - - rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; - - /* 24.21 - (21): Write 0xffff to SCCE */ - immr->im_scc[CONFIG_ETHER_INDEX-1].scc_scce = ~(0x0); - - /* 24.21 - (22): Write to SCCM to enable TXE, RXF, TXB events */ - immr->im_scc[CONFIG_ETHER_INDEX-1].scc_sccm = (SCCE_ENET_TXE | - SCCE_ENET_RXF | - SCCE_ENET_TXB); - - /* 24.21 - (23): we don't use ethernet interrupts */ - - /* 24.21 - (24): Clear GSMR_H to enable normal operations */ - immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrh = 0; - - /* 24.21 - (25): Clear GSMR_L to enable normal operations */ - immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl = (SCC_GSMRL_TCI | - SCC_GSMRL_TPL_48 | - SCC_GSMRL_TPP_10 | - SCC_GSMRL_MODE_ENET); - - /* 24.21 - (26): Initialize DSR */ - immr->im_scc[CONFIG_ETHER_INDEX-1].scc_dsr = 0xd555; - - /* 24.21 - (27): Initialize PSMR2 - * - * Settings: - * CRC = 32-Bit CCITT - * NIB = Begin searching for SFD 22 bits after RENA - * FDE = Full Duplex Enable - * BRO = Reject broadcast packets - * PROMISCOUS = Catch all packets regardless of dest. MAC adress - */ - immr->im_scc[CONFIG_ETHER_INDEX-1].scc_psmr = SCC_PSMR_ENCRC | - SCC_PSMR_NIB22 | -#if defined(CONFIG_SCC_ENET_FULL_DUPLEX) - SCC_PSMR_FDE | -#endif -#if defined(CONFIG_SCC_ENET_NO_BROADCAST) - SCC_PSMR_BRO | -#endif -#if defined(CONFIG_SCC_ENET_PROMISCOUS) - SCC_PSMR_PRO | -#endif - 0; - - /* 24.21 - (28): Write to GSMR_L to enable SCC */ - immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR | - SCC_GSMRL_ENT); - - return 0; -} - - -static void sec_halt(struct eth_device *dev) -{ - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl &= ~(SCC_GSMRL_ENR | - SCC_GSMRL_ENT); -} - -#if 0 -static void sec_restart(void) -{ - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - immr->im_cpm.cp_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR | - SCC_GSMRL_ENT); -} -#endif - -int mpc82xx_scc_enet_initialize(bd_t *bis) -{ - struct eth_device *dev; - - dev = (struct eth_device *) malloc(sizeof *dev); - memset(dev, 0, sizeof *dev); - - strcpy(dev->name, "SCC"); - dev->init = sec_init; - dev->halt = sec_halt; - dev->send = sec_send; - dev->recv = sec_rx; - - eth_register(dev); - - return 1; -} |