diff options
Diffstat (limited to 'arch/powerpc/cpu/mpc85xx/ddr-gen3.c')
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/ddr-gen3.c | 91 |
1 files changed, 67 insertions, 24 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c index ca4ed62645..f118dd5daf 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c @@ -18,12 +18,14 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num) { - unsigned int i; + unsigned int i, bus_width; volatile ccsr_ddr_t *ddr; u32 temp_sdram_cfg; + u32 total_gb_size_per_controller; + int timeout; #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 + int timeout_save; volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR; - u32 total_gb_size_per_controller; unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t; int csn = -1; #endif @@ -52,8 +54,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, return; } - out_be32(&ddr->eor, regs->ddr_eor); - + if (regs->ddr_eor) + out_be32(&ddr->eor, regs->ddr_eor); #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 debug("Workaround for ERRATUM_DDR111_DDR134\n"); for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { @@ -121,6 +123,11 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5); out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl); out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl); + if (regs->ddr_wrlvl_cntl_2) + out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2); + if (regs->ddr_wrlvl_cntl_3) + out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3); + out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr); out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1); out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2); @@ -134,6 +141,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->debug[i], regs->debug[i]); } } +#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934 + out_be32(&ddr->debug[28], 0x00003000); +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474 out_be32(&ddr->debug[12], 0x00000015); @@ -270,9 +280,48 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN); asm volatile("sync;isync"); + total_gb_size_per_controller = 0; + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (!(regs->cs[i].config & 0x80000000)) + continue; + total_gb_size_per_controller += 1 << ( + ((regs->cs[i].config >> 14) & 0x3) + 2 + + ((regs->cs[i].config >> 8) & 0x7) + 12 + + ((regs->cs[i].config >> 0) & 0x7) + 8 + + 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) - + 26); /* minus 26 (count of 64M) */ + } + if (fsl_ddr_get_intl3r() & 0x80000000) /* 3-way interleaving */ + total_gb_size_per_controller *= 3; + else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */ + total_gb_size_per_controller <<= 1; + /* + * total memory / bus width = transactions needed + * transactions needed / data rate = seconds + * to add plenty of buffer, double the time + * For example, 2GB on 666MT/s 64-bit bus takes about 402ms + * Let's wait for 800ms + */ + bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) + >> SDRAM_CFG_DBW_SHIFT); + timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / + (get_ddr_freq(0) >> 20)) << 1; +#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 + timeout_save = timeout; +#endif + total_gb_size_per_controller >>= 4; /* shift down to gb size */ + debug("total %d GB\n", total_gb_size_per_controller); + debug("Need to wait up to %d * 10ms\n", timeout); + /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */ - while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) + while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) && + (timeout >= 0)) { udelay(10000); /* throttle polling rate */ + timeout--; + } + + if (timeout <= 0) + printf("Waiting for D_INIT timeout. Memory may not work.\n"); #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 /* continue this workaround */ @@ -330,23 +379,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, while (in_be32(&ddr->debug[1]) & 0x400) udelay(10000); /* throttle polling rate */ - /* 7. Wait for 400ms/GB */ - total_gb_size_per_controller = 0; - for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { - if (i == csn) { - total_gb_size_per_controller += - ((csn_bnds_backup & 0xFFFF) >> 6) - - (csn_bnds_backup >> 22) + 1; - } else { - total_gb_size_per_controller += - ((regs->cs[i].bnds & 0xFFFF) >> 6) - - (regs->cs[i].bnds >> 22) + 1; - } - } - if (in_be32(&ddr->sdram_cfg) & 0x80000) - total_gb_size_per_controller <<= 1; - debug("Wait for %d ms\n", total_gb_size_per_controller * 400); - udelay(total_gb_size_per_controller * 400000); + /* 7. Wait for state machine 2nd run, roughly 400ms/GB */ + debug("Wait for %d * 10ms\n", timeout_save); + udelay(timeout_save * 10000); /* 8. Set sdram_cfg_2[dinit] if options requires */ setbits_be32(&ddr->sdram_cfg_2, @@ -354,8 +389,16 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2)); /* 9. Poll until dinit is cleared */ - while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) - udelay(10000); + timeout = timeout_save; + debug("Need to wait up to %d * 10ms\n", timeout); + while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) && + (timeout >= 0)) { + udelay(10000); /* throttle polling rate */ + timeout--; + } + + if (timeout <= 0) + printf("Waiting for D_INIT timeout. Memory may not work.\n"); /* 10. Clear EEBACR[3] */ clrbits_be32(&ecm->eebacr, 10000000); |