summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu/mpc85xx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/cpu/mpc85xx')
-rw-r--r--arch/powerpc/cpu/mpc85xx/Makefile2
-rw-r--r--arch/powerpc/cpu/mpc85xx/b4860_ids.c12
-rw-r--r--arch/powerpc/cpu/mpc85xx/c29x_serdes.c62
-rw-r--r--arch/powerpc/cpu/mpc85xx/cmd_errata.c12
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu.c68
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu_init.c49
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen1.c2
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen2.c2
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen3.c36
-rw-r--r--arch/powerpc/cpu/mpc85xx/fdt.c18
-rw-r--r--arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c16
-rw-r--r--arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h1
-rw-r--r--arch/powerpc/cpu/mpc85xx/release.S15
-rw-r--r--arch/powerpc/cpu/mpc85xx/speed.c142
-rw-r--r--arch/powerpc/cpu/mpc85xx/start.S3
-rw-r--r--arch/powerpc/cpu/mpc85xx/t4240_ids.c12
-rw-r--r--arch/powerpc/cpu/mpc85xx/t4240_serdes.c14
-rw-r--r--arch/powerpc/cpu/mpc85xx/tlb.c3
-rw-r--r--arch/powerpc/cpu/mpc85xx/u-boot-spl.lds5
19 files changed, 331 insertions, 143 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 0d1e8f1f0a..f70f0d747d 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -46,6 +46,7 @@ COBJS-$(CONFIG_MPC8568) += ddr-gen2.o
COBJS-$(CONFIG_MPC8544) += ddr-gen2.o
# supports ddr1/2/3
+COBJS-$(CONFIG_PPC_C29X) += ddr-gen3.o
COBJS-$(CONFIG_MPC8572) += ddr-gen3.o
COBJS-$(CONFIG_MPC8536) += ddr-gen3.o
COBJS-$(CONFIG_MPC8569) += ddr-gen3.o
@@ -100,6 +101,7 @@ COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) += fsl_corenet_serdes.o
COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o
# SoC specific SERDES support
+COBJS-$(CONFIG_PPC_C29X) += c29x_serdes.o
COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o
COBJS-$(CONFIG_MPC8544) += mpc8544_serdes.o
COBJS-$(CONFIG_MPC8548) += mpc8548_serdes.o
diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c
index 53c6a7faf9..39b8e3ecc2 100644
--- a/arch/powerpc/cpu/mpc85xx/b4860_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c
@@ -41,8 +41,8 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
#ifdef CONFIG_SYS_SRIO
struct srio_liodn_id_table srio_liodn_tbl[] = {
- SET_SRIO_LIODN_1(1, 307),
- SET_SRIO_LIODN_1(2, 387),
+ SET_SRIO_LIODN_BASE(1, 307),
+ SET_SRIO_LIODN_BASE(2, 387),
};
int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
#endif
@@ -112,10 +112,10 @@ int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
#ifdef CONFIG_SYS_DPAA_RMAN
struct liodn_id_table rman_liodn_tbl[] = {
/* Set RMan block 0-3 liodn offset */
- SET_RMAN_LIODN(0, 678),
- SET_RMAN_LIODN(1, 679),
- SET_RMAN_LIODN(2, 680),
- SET_RMAN_LIODN(3, 681),
+ SET_RMAN_LIODN(0, 6),
+ SET_RMAN_LIODN(1, 7),
+ SET_RMAN_LIODN(2, 8),
+ SET_RMAN_LIODN(3, 9),
};
int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/c29x_serdes.c b/arch/powerpc/cpu/mpc85xx/c29x_serdes.c
new file mode 100644
index 0000000000..51972cb7cb
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/c29x_serdes.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+#define SRDS1_MAX_LANES 4
+
+static u32 serdes1_prtcl_map;
+
+struct serdes_config {
+ u32 protocol;
+ u8 lanes[SRDS1_MAX_LANES];
+};
+
+static const struct serdes_config serdes1_cfg_tbl[] = {
+ /* SerDes 1 */
+ {1, {PCIE1, PCIE1, PCIE1, PCIE1} },
+ {2, {PCIE1, PCIE1, PCIE1, PCIE1} },
+ {3, {PCIE1, PCIE1, NONE, NONE} },
+ {4, {PCIE1, PCIE1, NONE, NONE} },
+ {5, {PCIE1, NONE, NONE, NONE} },
+ {6, {PCIE1, NONE, NONE, NONE} },
+ {}
+};
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+ return (1 << device) & serdes1_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ u32 pordevsr = in_be32(&gur->pordevsr);
+ u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+ MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+ const struct serdes_config *ptr;
+ int lane;
+
+ debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
+
+ if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
+ return;
+ }
+
+ ptr = &serdes1_cfg_tbl[srds_cfg];
+ if (!ptr->protocol)
+ return;
+
+ for (lane = 0; lane < SRDS1_MAX_LANES; lane++) {
+ enum srds_prtcl lane_prtcl = ptr->lanes[lane];
+ serdes1_prtcl_map |= (1 << lane_prtcl);
+ }
+}
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index 5cd02ccde6..eea264b151 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -245,6 +245,18 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#ifdef CONFIG_SYS_FSL_ERRATUM_A006593
puts("Work-around for Erratum A006593 enabled\n");
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
+ if (IS_SVR_REV(svr, 1, 0))
+ puts("Work-around for Erratum A003571 enabled\n");
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A005812
+ puts("Work-around for Erratum A-005812 enabled\n");
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447
+ if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) ||
+ (SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV))
+ puts("Work-around for Erratum I2C-A004447 enabled\n");
+#endif
return 0;
}
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 91ac4ee617..1a0196c7c4 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -44,10 +44,10 @@ int checkcpu (void)
uint major, minor;
struct cpu_type *cpu;
char buf1[32], buf2[32];
-#if (defined(CONFIG_DDR_CLK_FREQ) || \
- defined(CONFIG_FSL_CORENET)) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#endif /* CONFIG_FSL_CORENET */
+#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET)
+ ccsr_gur_t __iomem *gur =
+ (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#endif
/*
* Cornet platforms use ddr sync bit in RCW to indicate sync vs async
@@ -135,81 +135,97 @@ int checkcpu (void)
if (!(i & 3))
printf ("\n ");
printf("CPU%d:%-4s MHz, ", core,
- strmhz(buf1, sysinfo.freqProcessor[core]));
+ strmhz(buf1, sysinfo.freq_processor[core]));
}
- printf("\n CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
+ printf("\n CCB:%-4s MHz,", strmhz(buf1, sysinfo.freq_systembus));
+ printf("\n");
#ifdef CONFIG_FSL_CORENET
if (ddr_sync == 1) {
printf(" DDR:%-4s MHz (%s MT/s data rate) "
"(Synchronous), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
+ strmhz(buf1, sysinfo.freq_ddrbus/2),
+ strmhz(buf2, sysinfo.freq_ddrbus));
} else {
printf(" DDR:%-4s MHz (%s MT/s data rate) "
"(Asynchronous), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
+ strmhz(buf1, sysinfo.freq_ddrbus/2),
+ strmhz(buf2, sysinfo.freq_ddrbus));
}
#else
switch (ddr_ratio) {
case 0x0:
printf(" DDR:%-4s MHz (%s MT/s data rate), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
+ strmhz(buf1, sysinfo.freq_ddrbus/2),
+ strmhz(buf2, sysinfo.freq_ddrbus));
break;
case 0x7:
printf(" DDR:%-4s MHz (%s MT/s data rate) "
"(Synchronous), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
+ strmhz(buf1, sysinfo.freq_ddrbus/2),
+ strmhz(buf2, sysinfo.freq_ddrbus));
break;
default:
printf(" DDR:%-4s MHz (%s MT/s data rate) "
"(Asynchronous), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
+ strmhz(buf1, sysinfo.freq_ddrbus/2),
+ strmhz(buf2, sysinfo.freq_ddrbus));
break;
}
#endif
#if defined(CONFIG_FSL_LBC)
- if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
- printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+ if (sysinfo.freq_localbus > LCRR_CLKDIV) {
+ printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
} else {
printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
- sysinfo.freqLocalBus);
+ sysinfo.freq_localbus);
}
#endif
#if defined(CONFIG_FSL_IFC)
- printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+ printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
#endif
#ifdef CONFIG_CPM2
- printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
+ printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freq_systembus));
#endif
#ifdef CONFIG_QE
- printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freqQE));
+ printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freq_qe));
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) {
printf(" FMAN%d: %s MHz\n", i + 1,
- strmhz(buf1, sysinfo.freqFMan[i]));
+ strmhz(buf1, sysinfo.freq_fman[i]));
}
#endif
#ifdef CONFIG_SYS_DPAA_QBMAN
- printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freqQMAN));
+ printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freq_qman));
#endif
#ifdef CONFIG_SYS_DPAA_PME
- printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME));
+ printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freq_pme));
#endif
- puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n");
+ puts("L1: D-cache 32 KiB enabled\n I-cache 32 KiB enabled\n");
+
+#ifdef CONFIG_FSL_CORENET
+ /* Display the RCW, so that no one gets confused as to what RCW
+ * we're actually using for this boot.
+ */
+ puts("Reset Configuration Word (RCW):");
+ for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
+ u32 rcw = in_be32(&gur->rcwsr[i]);
+
+ if ((i % 4) == 0)
+ printf("\n %08x:", i * 4);
+ printf(" %08x", rcw);
+ }
+ puts("\n");
+#endif
return 0;
}
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 25beda233e..6036333eaa 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -22,6 +22,7 @@
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_srio.h>
+#include <fsl_usb.h>
#include <hwconfig.h>
#include <linux/compiler.h>
#include "mp.h"
@@ -166,7 +167,8 @@ static void enable_cpc(void)
}
- printf("Corenet Platform Cache: %d KB enabled\n", size);
+ puts("Corenet Platform Cache: ");
+ print_size(size * 1024, " enabled\n");
}
static void invalidate_cpc(void)
@@ -355,7 +357,9 @@ int cpu_init_r(void)
extern int spin_table_compat;
const char *spin;
#endif
-
+#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
+ ccsr_sec_t __iomem *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR;
+#endif
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
/*
@@ -399,6 +403,14 @@ int cpu_init_r(void)
sync();
}
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A005812
+ /*
+ * A-005812 workaround sets bit 32 of SPR 976 for SoCs running
+ * in write shadow mode. Checking DCWS before setting SPR 976.
+ */
+ if (mfspr(L1CSR2) & L1CSR2_DCWS)
+ mtspr(SPRN_HDBCR0, (mfspr(SPRN_HDBCR0) | 0x80000000));
+#endif
#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
spin = getenv("spin_table_compat");
@@ -448,28 +460,28 @@ int cpu_init_r(void)
case 0x1:
if (ver == SVR_8540 || ver == SVR_8560 ||
ver == SVR_8541 || ver == SVR_8555) {
- puts("128 KB ");
- /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
+ puts("128 KiB ");
+ /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 KiBibyte) */
cache_ctl = 0xc4000000;
} else {
- puts("256 KB ");
+ puts("256 KiB ");
cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
}
break;
case 0x2:
if (ver == SVR_8540 || ver == SVR_8560 ||
ver == SVR_8541 || ver == SVR_8555) {
- puts("256 KB ");
- /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
+ puts("256 KiB ");
+ /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 KiBibyte) */
cache_ctl = 0xc8000000;
} else {
- puts ("512 KB ");
+ puts("512 KiB ");
/* set L2E=1, L2I=1, & L2SRAM=0 */
cache_ctl = 0xc0000000;
}
break;
case 0x3:
- puts("1024 KB ");
+ puts("1024 KiB ");
/* set L2E=1, L2I=1, & L2SRAM=0 */
cache_ctl = 0xc0000000;
break;
@@ -517,13 +529,14 @@ int cpu_init_r(void)
if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
;
- printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64);
+ print_size((l2cfg0 & 0x3fff) * 64 * 1024, " enabled\n");
}
skip_l2:
#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
if (l2cache->l2csr0 & L2CSR0_L2E)
- printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64);
+ print_size((l2cache->l2cfg0 & 0x3fff) * 64 * 1024,
+ " enabled\n");
enable_cluster_l2();
#else
@@ -532,8 +545,16 @@ skip_l2:
enable_cpc();
+#ifndef CONFIG_SYS_FSL_NO_SERDES
/* needs to be in ram since code uses global static vars */
fsl_serdes_init();
+#endif
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
+#define MCFGR_AXIPIPE 0x000000f0
+ if (IS_SVR_REV(svr, 1, 0))
+ clrbits_be32(&sec->mcfgr, MCFGR_AXIPIPE);
+#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A005871
if (IS_SVR_REV(svr, 1, 0)) {
@@ -595,7 +616,7 @@ skip_l2:
#ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE
{
- ccsr_usb_phy_t *usb_phy1 =
+ struct ccsr_usb_phy __iomem *usb_phy1 =
(void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
out_be32(&usb_phy1->usb_enable_override,
CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
@@ -603,7 +624,7 @@ skip_l2:
#endif
#ifdef CONFIG_SYS_FSL_USB2_PHY_ENABLE
{
- ccsr_usb_phy_t *usb_phy2 =
+ struct ccsr_usb_phy __iomem *usb_phy2 =
(void *)CONFIG_SYS_MPC85xx_USB2_PHY_ADDR;
out_be32(&usb_phy2->usb_enable_override,
CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
@@ -625,7 +646,7 @@ skip_l2:
#endif
#if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE)
- ccsr_usb_phy_t *usb_phy =
+ struct ccsr_usb_phy __iomem *usb_phy =
(void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
setbits_be32(&usb_phy->pllprg[1],
CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN |
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
index 8a86819fb5..4dd8c0b5bf 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
@@ -15,7 +15,7 @@
#endif
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num)
+ unsigned int ctrl_num, int step)
{
unsigned int i;
volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
index a705862522..542bc84acf 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
@@ -16,7 +16,7 @@
#endif
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num)
+ unsigned int ctrl_num, int step)
{
unsigned int i;
ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index c5b47200e0..1be51d3307 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -15,8 +15,18 @@
#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
#endif
+
+/*
+ * regs has the to-be-set values for DDR controller registers
+ * ctrl_num is the DDR controller number
+ * step: 0 goes through the initialization in one pass
+ * 1 sets registers and returns before enabling controller
+ * 2 resumes from step 1 and continues to initialize
+ * Dividing the initialization to two steps to deassert DDR reset signal
+ * to comply with JEDEC specs for RDIMMs.
+ */
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num)
+ unsigned int ctrl_num, int step)
{
unsigned int i, bus_width;
volatile ccsr_ddr_t *ddr;
@@ -54,6 +64,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
return;
}
+ if (step == 2)
+ goto step2;
+
if (regs->ddr_eor)
out_be32(&ddr->eor, regs->ddr_eor);
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
@@ -123,10 +136,17 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
+#ifndef CONFIG_SYS_FSL_DDR_EMU
+ /*
+ * Skip these two registers if running on emulator
+ * because emulator doesn't have skew between bytes.
+ */
+
if (regs->ddr_wrlvl_cntl_2)
out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2);
if (regs->ddr_wrlvl_cntl_3)
out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3);
+#endif
out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
@@ -150,6 +170,20 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->debug[21], 0x24000000);
#endif /* CONFIG_SYS_FSL_ERRATUM_DDR_A003474 */
+ /*
+ * For RDIMMs, JEDEC spec requires clocks to be stable before reset is
+ * deasserted. Clocks start when any chip select is enabled and clock
+ * control register is set. Because all DDR components are connected to
+ * one reset signal, this needs to be done in two steps. Step 1 is to
+ * get the clocks started. Step 2 resumes after reset signal is
+ * deasserted.
+ */
+ if (step == 1) {
+ udelay(200);
+ return;
+ }
+
+step2:
/* Set, but do not enable the memory */
temp_sdram_cfg = regs->ddr_sdram_cfg;
temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index cfaa2edced..533d47ab43 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -403,22 +403,22 @@ static void ft_fixup_dpaa_clks(void *blob)
get_sys_info(&sysinfo);
#ifdef CONFIG_SYS_DPAA_FMAN
ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET,
- sysinfo.freqFMan[0]);
+ sysinfo.freq_fman[0]);
#if (CONFIG_SYS_NUM_FMAN == 2)
ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET,
- sysinfo.freqFMan[1]);
+ sysinfo.freq_fman[1]);
#endif
#endif
#ifdef CONFIG_SYS_DPAA_QBMAN
do_fixup_by_compat_u32(blob, "fsl,qman",
- "clock-frequency", sysinfo.freqQMAN, 1);
+ "clock-frequency", sysinfo.freq_qman, 1);
#endif
#ifdef CONFIG_SYS_DPAA_PME
do_fixup_by_compat_u32(blob, "fsl,pme",
- "clock-frequency", sysinfo.freqPME, 1);
+ "clock-frequency", sysinfo.freq_pme, 1);
#endif
}
#else
@@ -476,7 +476,7 @@ void fdt_fixup_fman_firmware(void *blob)
if (!p)
return;
- fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 0);
+ fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 16);
if (!fmanfw)
return;
@@ -604,15 +604,19 @@ void ft_cpu_setup(void *blob, bd_t *bd)
fdt_add_enet_stashing(blob);
+#ifndef CONFIG_FSL_TBCLK_EXTRA_DIV
+#define CONFIG_FSL_TBCLK_EXTRA_DIV 1
+#endif
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", get_tbclk(), 1);
+ "timebase-frequency", get_tbclk() / CONFIG_FSL_TBCLK_EXTRA_DIV,
+ 1);
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"bus-frequency", bd->bi_busfreq, 1);
get_sys_info(&sysinfo);
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
while (off != -FDT_ERR_NOTFOUND) {
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
- val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]);
+ val = cpu_to_fdt32(sysinfo.freq_processor[*reg]);
fdt_setprop(blob, off, "clock-frequency", &val, 4);
off = fdt_node_offset_by_prop_value(blob, off, "device_type",
"cpu", 4);
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
index de6bd11a16..39d9409d64 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
@@ -13,8 +13,12 @@
#include <asm/errno.h>
#include "fsl_corenet2_serdes.h"
+#ifdef CONFIG_SYS_FSL_SRDS_1
static u64 serdes1_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
static u64 serdes2_prtcl_map;
+#endif
#ifdef CONFIG_SYS_FSL_SRDS_3
static u64 serdes3_prtcl_map;
#endif
@@ -78,8 +82,12 @@ int is_serdes_configured(enum srds_prtcl device)
{
u64 ret = 0;
+#ifdef CONFIG_SYS_FSL_SRDS_1
ret |= (1ULL << device) & serdes1_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
ret |= (1ULL << device) & serdes2_prtcl_map;
+#endif
#ifdef CONFIG_SYS_FSL_SRDS_3
ret |= (1ULL << device) & serdes3_prtcl_map;
#endif
@@ -97,14 +105,18 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
int i;
switch (sd) {
+#ifdef CONFIG_SYS_FSL_SRDS_1
case FSL_SRDS_1:
cfg &= FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
cfg >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
break;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
case FSL_SRDS_2:
cfg &= FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
cfg >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
break;
+#endif
#ifdef CONFIG_SYS_FSL_SRDS_3
case FSL_SRDS_3:
cfg &= FSL_CORENET2_RCWSR4_SRDS3_PRTCL;
@@ -163,14 +175,18 @@ u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift)
void fsl_serdes_init(void)
{
+#ifdef CONFIG_SYS_FSL_SRDS_1
serdes1_prtcl_map = serdes_init(FSL_SRDS_1,
CONFIG_SYS_FSL_CORENET_SERDES_ADDR,
FSL_CORENET2_RCWSR4_SRDS1_PRTCL,
FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT);
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
serdes2_prtcl_map = serdes_init(FSL_SRDS_2,
CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_2 * 0x1000,
FSL_CORENET2_RCWSR4_SRDS2_PRTCL,
FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT);
+#endif
#ifdef CONFIG_SYS_FSL_SRDS_3
serdes3_prtcl_map = serdes_init(FSL_SRDS_3,
CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_3 * 0x1000,
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h
index 6de572d594..d515b234a4 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h
@@ -9,5 +9,4 @@
int is_serdes_prtcl_valid(int serdes, u32 prtcl);
int serdes_lane_enabled(int lane);
-enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
#endif /* __FSL_CORENET2_SERDES_H */
diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index 15bbbc15aa..c15e83b521 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -226,6 +226,21 @@ __secondary_start_page:
2:
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A005812
+ /*
+ * A-005812 workaround sets bit 32 of SPR 976 for SoCs running in
+ * write shadow mode. This code should run after other code setting
+ * DCWS.
+ */
+ mfspr r3,L1CSR2
+ andis. r3,r3,(L1CSR2_DCWS)@h
+ beq 1f
+ mfspr r3, SPRN_HDBCR0
+ oris r3, r3, 0x8000
+ mtspr SPRN_HDBCR0, r3
+1:
+#endif
+
#ifdef CONFIG_BACKSIDE_L2_CACHE
/* skip L2 setup on P2040/P2040E as they have no L2 */
mfspr r3,SPRN_SVR
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index f093960fe7..07690f97b1 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -20,7 +20,7 @@ DECLARE_GLOBAL_DATA_PTR;
/* --------------------------------------------------------------- */
-void get_sys_info (sys_info_t * sysInfo)
+void get_sys_info(sys_info_t *sys_info)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#ifdef CONFIG_FSL_IFC
@@ -46,7 +46,7 @@ void get_sys_info (sys_info_t * sysInfo)
[14] = 3, /* CC4 PPL / 4 */
};
- const u8 core_cplx_PLL_div[16] = {
+ const u8 core_cplx_pll_div[16] = {
[ 0] = 1, /* CC1 PPL / 1 */
[ 1] = 2, /* CC1 PPL / 2 */
[ 2] = 4, /* CC1 PPL / 4 */
@@ -60,26 +60,26 @@ void get_sys_info (sys_info_t * sysInfo)
[13] = 2, /* CC4 PPL / 2 */
[14] = 4, /* CC4 PPL / 4 */
};
- uint i, freqCC_PLL[6], rcw_tmp;
+ uint i, freq_cc_pll[6], rcw_tmp;
uint ratio[6];
unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
uint mem_pll_rat;
- sysInfo->freqSystemBus = sysclk;
+ sys_info->freq_systembus = sysclk;
#ifdef CONFIG_DDR_CLK_FREQ
- sysInfo->freqDDRBus = CONFIG_DDR_CLK_FREQ;
+ sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
#else
- sysInfo->freqDDRBus = sysclk;
+ sys_info->freq_ddrbus = sysclk;
#endif
- sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
+ sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT)
& FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
if (mem_pll_rat > 2)
- sysInfo->freqDDRBus *= mem_pll_rat;
+ sys_info->freq_ddrbus *= mem_pll_rat;
else
- sysInfo->freqDDRBus = sysInfo->freqSystemBus * mem_pll_rat;
+ sys_info->freq_ddrbus = sys_info->freq_systembus * mem_pll_rat;
ratio[0] = (in_be32(&clk->pllc1gsr) >> 1) & 0x3f;
ratio[1] = (in_be32(&clk->pllc2gsr) >> 1) & 0x3f;
@@ -89,9 +89,9 @@ void get_sys_info (sys_info_t * sysInfo)
ratio[5] = (in_be32(&clk->pllc6gsr) >> 1) & 0x3f;
for (i = 0; i < 6; i++) {
if (ratio[i] > 4)
- freqCC_PLL[i] = sysclk * ratio[i];
+ freq_cc_pll[i] = sysclk * ratio[i];
else
- freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i];
+ freq_cc_pll[i] = sys_info->freq_systembus * ratio[i];
}
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
/*
@@ -110,8 +110,8 @@ void get_sys_info (sys_info_t * sysInfo)
printf("Unsupported architecture configuration"
" in function %s\n", __func__);
cplx_pll += (cluster / 2) * 3;
- sysInfo->freqProcessor[cpu] =
- freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
+ sys_info->freq_processor[cpu] =
+ freq_cc_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
}
#ifdef CONFIG_PPC_B4860
#define FM1_CLK_SEL 0xe0000000
@@ -127,63 +127,63 @@ void get_sys_info (sys_info_t * sysInfo)
#ifdef CONFIG_SYS_DPAA_PME
switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) {
case 1:
- sysInfo->freqPME = freqCC_PLL[0];
+ sys_info->freq_pme = freq_cc_pll[0];
break;
case 2:
- sysInfo->freqPME = freqCC_PLL[0] / 2;
+ sys_info->freq_pme = freq_cc_pll[0] / 2;
break;
case 3:
- sysInfo->freqPME = freqCC_PLL[0] / 3;
+ sys_info->freq_pme = freq_cc_pll[0] / 3;
break;
case 4:
- sysInfo->freqPME = freqCC_PLL[0] / 4;
+ sys_info->freq_pme = freq_cc_pll[0] / 4;
break;
case 6:
- sysInfo->freqPME = freqCC_PLL[1] / 2;
+ sys_info->freq_pme = freq_cc_pll[1] / 2;
break;
case 7:
- sysInfo->freqPME = freqCC_PLL[1] / 3;
+ sys_info->freq_pme = freq_cc_pll[1] / 3;
break;
default:
printf("Error: Unknown PME clock select!\n");
case 0:
- sysInfo->freqPME = sysInfo->freqSystemBus / 2;
+ sys_info->freq_pme = sys_info->freq_systembus / 2;
break;
}
#endif
#ifdef CONFIG_SYS_DPAA_QBMAN
- sysInfo->freqQMAN = sysInfo->freqSystemBus / 2;
+ sys_info->freq_qman = sys_info->freq_systembus / 2;
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) {
case 1:
- sysInfo->freqFMan[0] = freqCC_PLL[3];
+ sys_info->freq_fman[0] = freq_cc_pll[3];
break;
case 2:
- sysInfo->freqFMan[0] = freqCC_PLL[3] / 2;
+ sys_info->freq_fman[0] = freq_cc_pll[3] / 2;
break;
case 3:
- sysInfo->freqFMan[0] = freqCC_PLL[3] / 3;
+ sys_info->freq_fman[0] = freq_cc_pll[3] / 3;
break;
case 4:
- sysInfo->freqFMan[0] = freqCC_PLL[3] / 4;
+ sys_info->freq_fman[0] = freq_cc_pll[3] / 4;
break;
case 5:
- sysInfo->freqFMan[0] = sysInfo->freqSystemBus;
+ sys_info->freq_fman[0] = sys_info->freq_systembus;
break;
case 6:
- sysInfo->freqFMan[0] = freqCC_PLL[4] / 2;
+ sys_info->freq_fman[0] = freq_cc_pll[4] / 2;
break;
case 7:
- sysInfo->freqFMan[0] = freqCC_PLL[4] / 3;
+ sys_info->freq_fman[0] = freq_cc_pll[4] / 3;
break;
default:
printf("Error: Unknown FMan1 clock select!\n");
case 0:
- sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
+ sys_info->freq_fman[0] = sys_info->freq_systembus / 2;
break;
}
#if (CONFIG_SYS_NUM_FMAN) == 2
@@ -192,27 +192,27 @@ void get_sys_info (sys_info_t * sysInfo)
rcw_tmp = in_be32(&gur->rcwsr[15]);
switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) {
case 1:
- sysInfo->freqFMan[1] = freqCC_PLL[4];
+ sys_info->freq_fman[1] = freq_cc_pll[4];
break;
case 2:
- sysInfo->freqFMan[1] = freqCC_PLL[4] / 2;
+ sys_info->freq_fman[1] = freq_cc_pll[4] / 2;
break;
case 3:
- sysInfo->freqFMan[1] = freqCC_PLL[4] / 3;
+ sys_info->freq_fman[1] = freq_cc_pll[4] / 3;
break;
case 4:
- sysInfo->freqFMan[1] = freqCC_PLL[4] / 4;
+ sys_info->freq_fman[1] = freq_cc_pll[4] / 4;
break;
case 6:
- sysInfo->freqFMan[1] = freqCC_PLL[3] / 2;
+ sys_info->freq_fman[1] = freq_cc_pll[3] / 2;
break;
case 7:
- sysInfo->freqFMan[1] = freqCC_PLL[3] / 3;
+ sys_info->freq_fman[1] = freq_cc_pll[3] / 3;
break;
default:
printf("Error: Unknown FMan2 clock select!\n");
case 0:
- sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
+ sys_info->freq_fman[1] = sys_info->freq_systembus / 2;
break;
}
#endif /* CONFIG_SYS_NUM_FMAN == 2 */
@@ -225,8 +225,8 @@ void get_sys_info (sys_info_t * sysInfo)
& 0xf;
u32 cplx_pll = core_cplx_PLL[c_pll_sel];
- sysInfo->freqProcessor[cpu] =
- freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
+ sys_info->freq_processor[cpu] =
+ freq_cc_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
}
#define PME_CLK_SEL 0x80000000
#define FM1_CLK_SEL 0x40000000
@@ -246,43 +246,43 @@ void get_sys_info (sys_info_t * sysInfo)
#ifdef CONFIG_SYS_DPAA_PME
if (rcw_tmp & PME_CLK_SEL) {
if (rcw_tmp & HWA_ASYNC_DIV)
- sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 4;
+ sys_info->freq_pme = freq_cc_pll[HWA_CC_PLL] / 4;
else
- sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 2;
+ sys_info->freq_pme = freq_cc_pll[HWA_CC_PLL] / 2;
} else {
- sysInfo->freqPME = sysInfo->freqSystemBus / 2;
+ sys_info->freq_pme = sys_info->freq_systembus / 2;
}
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
if (rcw_tmp & FM1_CLK_SEL) {
if (rcw_tmp & HWA_ASYNC_DIV)
- sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 4;
+ sys_info->freq_fman[0] = freq_cc_pll[HWA_CC_PLL] / 4;
else
- sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 2;
+ sys_info->freq_fman[0] = freq_cc_pll[HWA_CC_PLL] / 2;
} else {
- sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
+ sys_info->freq_fman[0] = sys_info->freq_systembus / 2;
}
#if (CONFIG_SYS_NUM_FMAN) == 2
if (rcw_tmp & FM2_CLK_SEL) {
if (rcw_tmp & HWA_ASYNC_DIV)
- sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 4;
+ sys_info->freq_fman[1] = freq_cc_pll[HWA_CC_PLL] / 4;
else
- sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 2;
+ sys_info->freq_fman[1] = freq_cc_pll[HWA_CC_PLL] / 2;
} else {
- sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
+ sys_info->freq_fman[1] = sys_info->freq_systembus / 2;
}
#endif
#endif
#ifdef CONFIG_SYS_DPAA_QBMAN
- sysInfo->freqQMAN = sysInfo->freqSystemBus / 2;
+ sys_info->freq_qman = sys_info->freq_systembus / 2;
#endif
#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
#else /* CONFIG_FSL_CORENET */
- uint plat_ratio, e500_ratio, half_freqSystemBus;
+ uint plat_ratio, e500_ratio, half_freq_systembus;
int i;
#ifdef CONFIG_QE
__maybe_unused u32 qe_ratio;
@@ -290,40 +290,40 @@ void get_sys_info (sys_info_t * sysInfo)
plat_ratio = (gur->porpllsr) & 0x0000003e;
plat_ratio >>= 1;
- sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
+ sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ;
/* Divide before multiply to avoid integer
* overflow for processor speeds above 2GHz */
- half_freqSystemBus = sysInfo->freqSystemBus/2;
+ half_freq_systembus = sys_info->freq_systembus/2;
for (i = 0; i < cpu_numcores(); i++) {
e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f;
- sysInfo->freqProcessor[i] = e500_ratio * half_freqSystemBus;
+ sys_info->freq_processor[i] = e500_ratio * half_freq_systembus;
}
- /* Note: freqDDRBus is the MCLK frequency, not the data rate. */
- sysInfo->freqDDRBus = sysInfo->freqSystemBus;
+ /* Note: freq_ddrbus is the MCLK frequency, not the data rate. */
+ sys_info->freq_ddrbus = sys_info->freq_systembus;
#ifdef CONFIG_DDR_CLK_FREQ
{
u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
if (ddr_ratio != 0x7)
- sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
+ sys_info->freq_ddrbus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
}
#endif
#ifdef CONFIG_QE
#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
- sysInfo->freqQE = sysInfo->freqSystemBus;
+ sys_info->freq_qe = sys_info->freq_systembus;
#else
qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
>> MPC85xx_PORPLLSR_QE_RATIO_SHIFT;
- sysInfo->freqQE = qe_ratio * CONFIG_SYS_CLK_FREQ;
+ sys_info->freq_qe = qe_ratio * CONFIG_SYS_CLK_FREQ;
#endif
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
- sysInfo->freqFMan[0] = sysInfo->freqSystemBus;
+ sys_info->freq_fman[0] = sys_info->freq_systembus;
#endif
#endif /* CONFIG_FSL_CORENET */
@@ -350,10 +350,10 @@ void get_sys_info (sys_info_t * sysInfo)
*/
lcrr_div *= 2;
#endif
- sysInfo->freqLocalBus = sysInfo->freqSystemBus / lcrr_div;
+ sys_info->freq_localbus = sys_info->freq_systembus / lcrr_div;
} else {
/* In case anyone cares what the unknown value is */
- sysInfo->freqLocalBus = lcrr_div;
+ sys_info->freq_localbus = lcrr_div;
}
#endif
@@ -361,7 +361,7 @@ void get_sys_info (sys_info_t * sysInfo)
ccr = in_be32(&ifc_regs->ifc_ccr);
ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
- sysInfo->freqLocalBus = sysInfo->freqSystemBus / ccr;
+ sys_info->freq_localbus = sys_info->freq_systembus / ccr;
#endif
}
@@ -382,13 +382,13 @@ int get_clocks (void)
dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
#endif
get_sys_info (&sys_info);
- gd->cpu_clk = sys_info.freqProcessor[0];
- gd->bus_clk = sys_info.freqSystemBus;
- gd->mem_clk = sys_info.freqDDRBus;
- gd->arch.lbc_clk = sys_info.freqLocalBus;
+ gd->cpu_clk = sys_info.freq_processor[0];
+ gd->bus_clk = sys_info.freq_systembus;
+ gd->mem_clk = sys_info.freq_ddrbus;
+ gd->arch.lbc_clk = sys_info.freq_localbus;
#ifdef CONFIG_QE
- gd->arch.qe_clk = sys_info.freqQE;
+ gd->arch.qe_clk = sys_info.freq_qe;
gd->arch.brg_clk = gd->arch.qe_clk / 2;
#endif
/*
@@ -400,7 +400,7 @@ int get_clocks (void)
*/
#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555)
- gd->arch.i2c1_clk = sys_info.freqSystemBus;
+ gd->arch.i2c1_clk = sys_info.freq_systembus;
#elif defined(CONFIG_MPC8544)
/*
* On the 8544, the I2C clock is the same as the SEC clock. This can be
@@ -410,12 +410,12 @@ int get_clocks (void)
* PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
*/
if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
- gd->arch.i2c1_clk = sys_info.freqSystemBus / 3;
+ gd->arch.i2c1_clk = sys_info.freq_systembus / 3;
else
- gd->arch.i2c1_clk = sys_info.freqSystemBus / 2;
+ gd->arch.i2c1_clk = sys_info.freq_systembus / 2;
#else
/* Most 85xx SOCs use CCB/2, so this is the default behavior. */
- gd->arch.i2c1_clk = sys_info.freqSystemBus / 2;
+ gd->arch.i2c1_clk = sys_info.freq_systembus / 2;
#endif
gd->arch.i2c2_clk = gd->arch.i2c1_clk;
@@ -429,7 +429,7 @@ int get_clocks (void)
#endif /* defined(CONFIG_FSL_ESDHC) */
#if defined(CONFIG_CPM2)
- gd->arch.vco_out = 2*sys_info.freqSystemBus;
+ gd->arch.vco_out = 2*sys_info.freq_systembus;
gd->arch.cpm_clk = gd->arch.vco_out / 2;
gd->arch.scc_clk = gd->arch.vco_out / 4;
gd->arch.brg_clk = gd->arch.vco_out / (1 << (2 * (dfbrg + 1)));
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index cfc3a60d2f..ad57a9cfa7 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -33,7 +33,8 @@
#define MINIMAL_SPL
#endif
-#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
+#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) && \
+ !defined(CONFIG_SECURE_BOOT) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
#define NOR_BOOT
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c
index e173cb5f95..54c1cfd2c1 100644
--- a/arch/powerpc/cpu/mpc85xx/t4240_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c
@@ -65,8 +65,8 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
#endif
struct srio_liodn_id_table srio_liodn_tbl[] = {
- SET_SRIO_LIODN_1(1, 307),
- SET_SRIO_LIODN_1(2, 387),
+ SET_SRIO_LIODN_BASE(1, 307),
+ SET_SRIO_LIODN_BASE(2, 387),
};
int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
@@ -159,10 +159,10 @@ int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
#ifdef CONFIG_SYS_DPAA_RMAN
struct liodn_id_table rman_liodn_tbl[] = {
/* Set RMan block 0-3 liodn offset */
- SET_RMAN_LIODN(0, 678),
- SET_RMAN_LIODN(1, 679),
- SET_RMAN_LIODN(2, 680),
- SET_RMAN_LIODN(3, 681),
+ SET_RMAN_LIODN(0, 6),
+ SET_RMAN_LIODN(1, 7),
+ SET_RMAN_LIODN(2, 8),
+ SET_RMAN_LIODN(3, 9),
};
int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
index ed88602c31..ff55e3c357 100644
--- a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
@@ -106,25 +106,25 @@ static const struct serdes_config serdes2_cfg_tbl[] = {
SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
{38, {NONE, NONE, QSGMII_FM2_B, NONE,
- NONE, NONE, QSGMII_FM1_A, NONE}},
+ NONE, NONE, QSGMII_FM2_A, NONE} },
{40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
- NONE, NONE, QSGMII_FM1_A, NONE}},
+ NONE, NONE, QSGMII_FM2_A, NONE} },
{46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
- NONE, NONE, QSGMII_FM1_A, NONE}},
+ NONE, NONE, QSGMII_FM2_A, NONE} },
{48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
- NONE, NONE, QSGMII_FM1_A, NONE}},
+ NONE, NONE, QSGMII_FM2_A, NONE} },
{50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
XAUI_FM2_MAC9, XAUI_FM2_MAC9,
- NONE, NONE, QSGMII_FM1_A, NONE}},
+ NONE, NONE, QSGMII_FM2_A, NONE} },
{52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
- NONE, NONE, QSGMII_FM1_A, NONE}},
+ NONE, NONE, QSGMII_FM2_A, NONE} },
{54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
- NONE, NONE, QSGMII_FM1_A, NONE}},
+ NONE, NONE, QSGMII_FM2_A, NONE} },
{56, {XFI_FM1_MAC9, XFI_FM1_MAC10,
XFI_FM2_MAC10, XFI_FM2_MAC9,
SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c
index da3c345d6f..8748ecd144 100644
--- a/arch/powerpc/cpu/mpc85xx/tlb.c
+++ b/arch/powerpc/cpu/mpc85xx/tlb.c
@@ -39,7 +39,8 @@ void init_tlbs(void)
return ;
}
-#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_NAND_SPL) && \
+ (!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL))
void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
phys_addr_t *rpn)
{
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
index 08188d75e5..85ec74ba94 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
@@ -44,6 +44,11 @@ SECTIONS
}
_edata = .;
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
. = ALIGN(8);
__init_begin = .;
__init_end = .;
generated by cgit (git 2.34.1) at 2025-01-22 12:18:55 +0000