diff options
Diffstat (limited to 'arch/ppc/cpu/mpc824x/drivers/epic')
| -rw-r--r-- | arch/ppc/cpu/mpc824x/drivers/epic/README | 102 | ||||
| -rw-r--r-- | arch/ppc/cpu/mpc824x/drivers/epic/epic.h | 163 | ||||
| -rw-r--r-- | arch/ppc/cpu/mpc824x/drivers/epic/epic1.c | 517 | ||||
| -rw-r--r-- | arch/ppc/cpu/mpc824x/drivers/epic/epic2.S | 196 | ||||
| -rw-r--r-- | arch/ppc/cpu/mpc824x/drivers/epic/epicutil.S | 57 |
5 files changed, 1035 insertions, 0 deletions
diff --git a/arch/ppc/cpu/mpc824x/drivers/epic/README b/arch/ppc/cpu/mpc824x/drivers/epic/README new file mode 100644 index 0000000000..57989969b9 --- /dev/null +++ b/arch/ppc/cpu/mpc824x/drivers/epic/README @@ -0,0 +1,102 @@ +CONTENT: + + epic.h + epic1.c + epic2.s + +WHAT ARE THESE FILES: + +These files contain MPC8240 (Kahlua) EPIC +driver routines. The driver routines are not +written for any specific operating system. +They serves the purpose of code sample, and +jump-start for using the MPC8240 EPIC unit. + +For the reason of correctness of C language +syntax, these files are compiled by Metaware +C compiler and assembler. + +ENDIAN NOTATION: + +The algorithm is designed for big-endian mode, +software is responsible for byte swapping. + +USAGE: + +1. The host system that is running on MPC8240 + shall link the files listed here. The memory + location of driver routines shall take into + account of that driver routines need to run + in supervisor mode and they process external + interrupts. + + The routine epic_exception shall be called by + exception vector at location 0x500, i.e., + 603e core external exception vector. + +2. The host system is responsible for configuring + the MPC8240 including Embedded Utilities Memory + Block. All EPIC driver functions require the + content of Embedded Utilities Memory Block + Base Address Register, EUMBBAR, as the first + parameter. + +3. Before EPIC unit of MPC8240 can be used, + initialize EPIC unit by calling epicInit + with the corresponding parameters. + + The initialization shall disable the 603e + core External Exception by calling CoreExtIntDisable( ). + Next, call epicInit( ). Last, enable the 603e core + External Exception by calling CoreExtIntEnable( ). + +4. After EPIC unit has been successfully initialized, + epicIntSourceSet( ) shall be used to register each + external interrupt source. Anytime, an external + interrupt source can be disabled or enabled by + calling corresponding function, epicIntDisable( ), + or epicIntEnable( ). + + Global Timers' resource, base count and frequency, + can be changed by calling epicTmFrequencySet( ) + and epicTmBaseSet( ). + + To stop counting a specific global timer, use + the function, epicTmInhibit while epicTmEnable + can be used to start counting a timer. + +5. To mask a set of external interrupts that are + are certain level below, epicIntPrioritySet( ) + can be used. For example, if the processor's + current task priority register is set to 0x7, + only interrupts of priority 0x8 or higher will + be passed to the processor. + + Be careful when using this function. It may + corrupt the current interrupt pending, selector, + and request registers, resulting an invalid vetor. + + After enabling an interrupt, disable it may also + cause an invalid vector. User may consider using + the spurious vector interrupt service routine to + handle this case. + +6. The EPIC driver routines contains a set + of utilities, Set and Get, for host system + to query and modify the desired EPIC source + registers. + +7. Each external interrupt source shall register + its interrupt service routine. The routine + shall contain all interrupt source specific + processes and keep as short as possible. + + Special customized end of interrupt routine + is optional. If it is needed, it shall contain + the external interrupt source specific end of + interrupt process. + + External interrupt exception vector at 0x500 + shall always call the epicEOI just before + rfi instruction. Refer to the routine, + epic_exception, for a code sample. diff --git a/arch/ppc/cpu/mpc824x/drivers/epic/epic.h b/arch/ppc/cpu/mpc824x/drivers/epic/epic.h new file mode 100644 index 0000000000..58f81c5dfd --- /dev/null +++ b/arch/ppc/cpu/mpc824x/drivers/epic/epic.h @@ -0,0 +1,163 @@ +/********************************************************************* + * mpc8240epic.h - EPIC module of the MPC8240 micro-controller + * + * Copyrigh 1999 Motorola Inc. + * + * Modification History: + * ===================== + * 01a,04Feb99,My Created. + * 15Nov200, robt -modified to use in U-Boot + * +*/ + +#ifndef __INCEPICh +#define __INCEPICh + +#define ULONG unsigned long +#define MAXVEC 20 +#define MAXIRQ 5 /* IRQs */ +#define EPIC_DIRECT_IRQ 0 /* Direct interrupt type */ + +/* EPIC register addresses */ + +#define EPIC_EUMBBAR 0x40000 /* EUMBBAR of EPIC */ +#define EPIC_FEATURES_REG (EPIC_EUMBBAR + 0x01000)/* Feature reporting */ +#define EPIC_GLOBAL_REG (EPIC_EUMBBAR + 0x01020)/* Global config. */ +#define EPIC_INT_CONF_REG (EPIC_EUMBBAR + 0x01030)/* Interrupt config. */ +#define EPIC_VENDOR_ID_REG (EPIC_EUMBBAR + 0x01080)/* Vendor id */ +#define EPIC_PROC_INIT_REG (EPIC_EUMBBAR + 0x01090)/* Processor init. */ +#define EPIC_SPUR_VEC_REG (EPIC_EUMBBAR + 0x010e0)/* Spurious vector */ +#define EPIC_TM_FREQ_REG (EPIC_EUMBBAR + 0x010f0)/* Timer Frequency */ + +#define EPIC_TM0_CUR_COUNT_REG (EPIC_EUMBBAR + 0x01100)/* Gbl TM0 Cur. Count*/ +#define EPIC_TM0_BASE_COUNT_REG (EPIC_EUMBBAR + 0x01110)/* Gbl TM0 Base Count*/ +#define EPIC_TM0_VEC_REG (EPIC_EUMBBAR + 0x01120)/* Gbl TM0 Vector Pri*/ +#define EPIC_TM0_DES_REG (EPIC_EUMBBAR + 0x01130)/* Gbl TM0 Dest. */ + +#define EPIC_TM1_CUR_COUNT_REG (EPIC_EUMBBAR + 0x01140)/* Gbl TM1 Cur. Count*/ +#define EPIC_TM1_BASE_COUNT_REG (EPIC_EUMBBAR + 0x01150)/* Gbl TM1 Base Count*/ +#define EPIC_TM1_VEC_REG (EPIC_EUMBBAR + 0x01160)/* Gbl TM1 Vector Pri*/ +#define EPIC_TM1_DES_REG (EPIC_EUMBBAR + 0x01170)/* Gbl TM1 Dest. */ + +#define EPIC_TM2_CUR_COUNT_REG (EPIC_EUMBBAR + 0x01180)/* Gbl TM2 Cur. Count*/ +#define EPIC_TM2_BASE_COUNT_REG (EPIC_EUMBBAR + 0x01190)/* Gbl TM2 Base Count*/ +#define EPIC_TM2_VEC_REG (EPIC_EUMBBAR + 0x011a0)/* Gbl TM2 Vector Pri*/ +#define EPIC_TM2_DES_REG (EPIC_EUMBBAR + 0x011b0)/* Gbl TM2 Dest */ + +#define EPIC_TM3_CUR_COUNT_REG (EPIC_EUMBBAR + 0x011c0)/* Gbl TM3 Cur. Count*/ +#define EPIC_TM3_BASE_COUNT_REG (EPIC_EUMBBAR + 0x011d0)/* Gbl TM3 Base Count*/ +#define EPIC_TM3_VEC_REG (EPIC_EUMBBAR + 0x011e0)/* Gbl TM3 Vector Pri*/ +#define EPIC_TM3_DES_REG (EPIC_EUMBBAR + 0x011f0)/* Gbl TM3 Dest. */ + +#define EPIC_EX_INT0_VEC_REG (EPIC_EUMBBAR + 0x10200)/* Ext. Int. Sr0 Des */ +#define EPIC_EX_INT0_DES_REG (EPIC_EUMBBAR + 0x10210)/* Ext. Int. Sr0 Vect*/ +#define EPIC_EX_INT1_VEC_REG (EPIC_EUMBBAR + 0x10220)/* Ext. Int. Sr1 Des */ +#define EPIC_EX_INT1_DES_REG (EPIC_EUMBBAR + 0x10230)/* Ext. Int. Sr1 Vect*/ +#define EPIC_EX_INT2_VEC_REG (EPIC_EUMBBAR + 0x10240)/* Ext. Int. Sr2 Des */ +#define EPIC_EX_INT2_DES_REG (EPIC_EUMBBAR + 0x10250)/* Ext. Int. Sr2 Vect*/ +#define EPIC_EX_INT3_VEC_REG (EPIC_EUMBBAR + 0x10260)/* Ext. Int. Sr3 Des */ +#define EPIC_EX_INT3_DES_REG (EPIC_EUMBBAR + 0x10270)/* Ext. Int. Sr3 Vect*/ +#define EPIC_EX_INT4_VEC_REG (EPIC_EUMBBAR + 0x10280)/* Ext. Int. Sr4 Des */ +#define EPIC_EX_INT4_DES_REG (EPIC_EUMBBAR + 0x10290)/* Ext. Int. Sr4 Vect*/ + +#define EPIC_SR_INT0_VEC_REG (EPIC_EUMBBAR + 0x10200)/* Sr. Int. Sr0 Des */ +#define EPIC_SR_INT0_DES_REG (EPIC_EUMBBAR + 0x10210)/* Sr. Int. Sr0 Vect */ +#define EPIC_SR_INT1_VEC_REG (EPIC_EUMBBAR + 0x10220)/* Sr. Int. Sr1 Des */ +#define EPIC_SR_INT1_DES_REG (EPIC_EUMBBAR + 0x10230)/* Sr. Int. Sr1 Vect.*/ +#define EPIC_SR_INT2_VEC_REG (EPIC_EUMBBAR + 0x10240)/* Sr. Int. Sr2 Des */ +#define EPIC_SR_INT2_DES_REG (EPIC_EUMBBAR + 0x10250)/* Sr. Int. Sr2 Vect.*/ +#define EPIC_SR_INT3_VEC_REG (EPIC_EUMBBAR + 0x10260)/* Sr. Int. Sr3 Des */ +#define EPIC_SR_INT3_DES_REG (EPIC_EUMBBAR + 0x10270)/* Sr. Int. Sr3 Vect.*/ +#define EPIC_SR_INT4_VEC_REG (EPIC_EUMBBAR + 0x10280)/* Sr. Int. Sr4 Des */ +#define EPIC_SR_INT4_DES_REG (EPIC_EUMBBAR + 0x10290)/* Sr. Int. Sr4 Vect.*/ + +#define EPIC_SR_INT5_VEC_REG (EPIC_EUMBBAR + 0x102a0)/* Sr. Int. Sr5 Des */ +#define EPIC_SR_INT5_DES_REG (EPIC_EUMBBAR + 0x102b0)/* Sr. Int. Sr5 Vect.*/ +#define EPIC_SR_INT6_VEC_REG (EPIC_EUMBBAR + 0x102c0)/* Sr. Int. Sr6 Des */ +#define EPIC_SR_INT6_DES_REG (EPIC_EUMBBAR + 0x102d0)/* Sr. Int. Sr6 Vect.*/ +#define EPIC_SR_INT7_VEC_REG (EPIC_EUMBBAR + 0x102e0)/* Sr. Int. Sr7 Des */ +#define EPIC_SR_INT7_DES_REG (EPIC_EUMBBAR + 0x102f0)/* Sr. Int. Sr7 Vect.*/ +#define EPIC_SR_INT8_VEC_REG (EPIC_EUMBBAR + 0x10300)/* Sr. Int. Sr8 Des */ +#define EPIC_SR_INT8_DES_REG (EPIC_EUMBBAR + 0x10310)/* Sr. Int. Sr8 Vect.*/ +#define EPIC_SR_INT9_VEC_REG (EPIC_EUMBBAR + 0x10320)/* Sr. Int. Sr9 Des */ +#define EPIC_SR_INT9_DES_REG (EPIC_EUMBBAR + 0x10330)/* Sr. Int. Sr9 Vect.*/ + +#define EPIC_SR_INT10_VEC_REG (EPIC_EUMBBAR + 0x10340)/* Sr. Int. Sr10 Des */ +#define EPIC_SR_INT10_DES_REG (EPIC_EUMBBAR + 0x10350)/* Sr. Int. Sr10 Vect*/ +#define EPIC_SR_INT11_VEC_REG (EPIC_EUMBBAR + 0x10360)/* Sr. Int. Sr11 Des */ +#define EPIC_SR_INT11_DES_REG (EPIC_EUMBBAR + 0x10370)/* Sr. Int. Sr11 Vect*/ +#define EPIC_SR_INT12_VEC_REG (EPIC_EUMBBAR + 0x10380)/* Sr. Int. Sr12 Des */ +#define EPIC_SR_INT12_DES_REG (EPIC_EUMBBAR + 0x10390)/* Sr. Int. Sr12 Vect*/ +#define EPIC_SR_INT13_VEC_REG (EPIC_EUMBBAR + 0x103a0)/* Sr. Int. Sr13 Des */ +#define EPIC_SR_INT13_DES_REG (EPIC_EUMBBAR + 0x103b0)/* Sr. Int. Sr13 Vect*/ +#define EPIC_SR_INT14_VEC_REG (EPIC_EUMBBAR + 0x103c0)/* Sr. Int. Sr14 Des */ +#define EPIC_SR_INT14_DES_REG (EPIC_EUMBBAR + 0x103d0)/* Sr. Int. Sr14 Vect*/ +#define EPIC_SR_INT15_VEC_REG (EPIC_EUMBBAR + 0x103e0)/* Sr. Int. Sr15 Des */ +#define EPIC_SR_INT15_DES_REG (EPIC_EUMBBAR + 0x103f0)/* Sr. Int. Sr15 Vect*/ + +#define EPIC_I2C_INT_VEC_REG (EPIC_EUMBBAR + 0x11020)/* I2C Int. Vect Pri.*/ +#define EPIC_I2C_INT_DES_REG (EPIC_EUMBBAR + 0x11030)/* I2C Int. Dest */ +#define EPIC_DMA0_INT_VEC_REG (EPIC_EUMBBAR + 0x11040)/* DMA0 Int. Vect Pri*/ +#define EPIC_DMA0_INT_DES_REG (EPIC_EUMBBAR + 0x11050)/* DMA0 Int. Dest */ +#define EPIC_DMA1_INT_VEC_REG (EPIC_EUMBBAR + 0x11060)/* DMA1 Int. Vect Pri*/ +#define EPIC_DMA1_INT_DES_REG (EPIC_EUMBBAR + 0x11070)/* DMA1 Int. Dest */ +#define EPIC_MSG_INT_VEC_REG (EPIC_EUMBBAR + 0x110c0)/* Msg Int. Vect Pri*/ +#define EPIC_MSG_INT_DES_REG (EPIC_EUMBBAR + 0x110d0)/* Msg Int. Dest */ + +#define EPIC_PROC_CTASK_PRI_REG (EPIC_EUMBBAR + 0x20080)/* Proc. current task*/ +#define EPIC_PROC_INT_ACK_REG (EPIC_EUMBBAR + 0x200a0)/* Int. acknowledge */ +#define EPIC_PROC_EOI_REG (EPIC_EUMBBAR + 0x200b0)/* End of interrupt */ + +#define EPIC_VEC_PRI_MASK 0x80000000 /* Mask Interrupt bit in IVPR */ +#define EPIC_VEC_PRI_DFLT_PRI 8 /* Interrupt Priority in IVPR */ + +/* Error code */ + +#define OK 0 +#define ERROR -1 + +/* function prototypes */ + +void epicVendorId( unsigned int *step, + unsigned int *devId, + unsigned int *venId + ); +void epicFeatures( unsigned int *noIRQs, + unsigned int *noCPUs, + unsigned int *VerId ); +extern void epicInit( unsigned int IRQType, unsigned int clkRatio); +ULONG sysEUMBBARRead ( ULONG regNum ); +void sysEUMBBARWrite ( ULONG regNum, ULONG regVal); +extern void epicTmFrequencySet( unsigned int frq ); +extern unsigned int epicTmFrequencyGet(void); +extern unsigned int epicTmBaseSet( ULONG srcAddr, + unsigned int cnt, + unsigned int inhibit ); +extern unsigned int epicTmBaseGet ( ULONG srcAddr, unsigned int *val ); +extern unsigned int epicTmCountGet( ULONG srcAddr, unsigned int *val ); +extern unsigned int epicTmInhibit( unsigned int timer ); +extern unsigned int epicTmEnable( ULONG srcAdr ); +extern void CoreExtIntEnable(void); /* Enable 603e external interrupts */ +extern void CoreExtIntDisable(void); /* Disable 603e external interrupts */ +extern unsigned char epicIntTaskGet(void); +extern void epicIntTaskSet( unsigned char val ); +extern unsigned int epicIntAck(void); +extern void epicSprSet( unsigned int eumbbar, unsigned char ); +extern void epicConfigGet( unsigned int *clkRatio, + unsigned int *serEnable ); +extern void SrcVecTableInit(void); +extern unsigned int epicModeGet(void); +extern void epicIntEnable(int Vect); +extern void epicIntDisable(int Vect); +extern int epicIntSourceConfig(int Vect, int Polarity, int Sense, int Prio); +extern unsigned int epicIntAck(void); +extern void epicEOI(void); +extern int epicCurTaskPrioSet(int Vect); + +struct SrcVecTable + { + ULONG srcAddr; + char srcName[40]; + }; + +#endif /* EPIC_H */ diff --git a/arch/ppc/cpu/mpc824x/drivers/epic/epic1.c b/arch/ppc/cpu/mpc824x/drivers/epic/epic1.c new file mode 100644 index 0000000000..ecbb42d0d6 --- /dev/null +++ b/arch/ppc/cpu/mpc824x/drivers/epic/epic1.c @@ -0,0 +1,517 @@ +/************************************************** + * + * copyright @ motorola, 1999 + * + *************************************************/ +#include <mpc824x.h> +#include <common.h> +#include "epic.h" + + +#define PRINT(format, args...) printf(format , ## args) + +typedef void (*VOIDFUNCPTR) (void); /* ptr to function returning void */ +struct SrcVecTable SrcVecTable[MAXVEC] = /* Addr/Vector cross-reference tbl */ + { + { EPIC_EX_INT0_VEC_REG, "External Direct/Serial Source 0"}, + { EPIC_EX_INT1_VEC_REG, "External Direct/Serial Source 1"}, + { EPIC_EX_INT2_VEC_REG, "External Direct/Serial Source 2"}, + { EPIC_EX_INT3_VEC_REG, "External Direct/Serial Source 3"}, + { EPIC_EX_INT4_VEC_REG, "External Direct/Serial Source 4"}, + + { EPIC_SR_INT5_VEC_REG, "External Serial Source 5"}, + { EPIC_SR_INT6_VEC_REG, "External Serial Source 6"}, + { EPIC_SR_INT7_VEC_REG, "External Serial Source 7"}, + { EPIC_SR_INT8_VEC_REG, "External Serial Source 8"}, + { EPIC_SR_INT9_VEC_REG, "External Serial Source 9"}, + { EPIC_SR_INT10_VEC_REG, "External Serial Source 10"}, + { EPIC_SR_INT11_VEC_REG, "External Serial Source 11"}, + { EPIC_SR_INT12_VEC_REG, "External Serial Source 12"}, + { EPIC_SR_INT13_VEC_REG, "External Serial Source 13"}, + { EPIC_SR_INT14_VEC_REG, "External Serial Source 14"}, + { EPIC_SR_INT15_VEC_REG, "External Serial Source 15"}, + + { EPIC_I2C_INT_VEC_REG, "Internal I2C Source"}, + { EPIC_DMA0_INT_VEC_REG, "Internal DMA0 Source"}, + { EPIC_DMA1_INT_VEC_REG, "Internal DMA1 Source"}, + { EPIC_MSG_INT_VEC_REG, "Internal Message Source"}, + }; + +VOIDFUNCPTR intVecTbl[MAXVEC]; /* Interrupt vector table */ + + +/**************************************************************************** +* epicInit - Initialize the EPIC registers +* +* This routine resets the Global Configuration Register, thus it: +* - Disables all interrupts +* - Sets epic registers to reset values +* - Sets the value of the Processor Current Task Priority to the +* highest priority (0xF). +* epicInit then sets the EPIC operation mode to Mixed Mode (vs. Pass +* Through or 8259 compatible mode). +* +* If IRQType (input) is Direct IRQs: +* - IRQType is written to the SIE bit of the EPIC Interrupt +* Configuration register (ICR). +* - clkRatio is ignored. +* If IRQType is Serial IRQs: +* - both IRQType and clkRatio will be written to the ICR register +*/ + +void epicInit + ( + unsigned int IRQType, /* Direct or Serial */ + unsigned int clkRatio /* Clk Ratio for Serial IRQs */ + ) + { + ULONG tmp; + + tmp = sysEUMBBARRead(EPIC_GLOBAL_REG); + tmp |= 0xa0000000; /* Set the Global Conf. register */ + sysEUMBBARWrite(EPIC_GLOBAL_REG, tmp); + /* + * Wait for EPIC to reset - CLH + */ + while( (sysEUMBBARRead(EPIC_GLOBAL_REG) & 0x80000000) == 1); + sysEUMBBARWrite(EPIC_GLOBAL_REG, 0x20000000); + tmp = sysEUMBBARRead(EPIC_INT_CONF_REG); /* Read interrupt conf. reg */ + + if (IRQType == EPIC_DIRECT_IRQ) /* direct mode */ + sysEUMBBARWrite(EPIC_INT_CONF_REG, tmp & 0xf7ffffff); + else /* Serial mode */ + { + tmp = (clkRatio << 28) | 0x08000000; /* Set clock ratio */ + sysEUMBBARWrite(EPIC_INT_CONF_REG, tmp); + } + + while (epicIntAck() != 0xff) /* Clear all pending interrupts */ + epicEOI(); +} + +/**************************************************************************** + * epicIntEnable - Enable an interrupt source + * + * This routine clears the mask bit of an external, an internal or + * a Timer register to enable the interrupt. + * + * RETURNS: None + */ +void epicIntEnable(int intVec) +{ + ULONG tmp; + ULONG srAddr; + + srAddr = SrcVecTable[intVec].srcAddr; /* Retrieve src Vec/Prio register */ + tmp = sysEUMBBARRead(srAddr); + tmp &= ~EPIC_VEC_PRI_MASK; /* Clear the mask bit */ + tmp |= (EPIC_VEC_PRI_DFLT_PRI << 16); /* Set priority to Default - CLH */ + tmp |= intVec; /* Set Vector number */ + sysEUMBBARWrite(srAddr, tmp); + + return; + } + +/**************************************************************************** + * epicIntDisable - Disable an interrupt source + * + * This routine sets the mask bit of an external, an internal or + * a Timer register to disable the interrupt. + * + * RETURNS: OK or ERROR + * + */ + +void epicIntDisable + ( + int intVec /* Interrupt vector number */ + ) + { + + ULONG tmp, srAddr; + + srAddr = SrcVecTable[intVec].srcAddr; + tmp = sysEUMBBARRead(srAddr); + tmp |= 0x80000000; /* Set the mask bit */ + sysEUMBBARWrite(srAddr, tmp); + return; + } + +/**************************************************************************** + * epicIntSourceConfig - Set properties of an interrupt source + * + * This function sets interrupt properites (Polarity, Sense, Interrupt + * Prority, and Interrupt Vector) of an Interrupt Source. The properties + * can be set when the current source is not in-request or in-service, + * which is determined by the Activity bit. This routine return ERROR + * if the the Activity bit is 1 (in-request or in-service). + * + * This function assumes that the Source Vector/Priority register (input) + * is a valid address. + * + * RETURNS: OK or ERROR + */ + +int epicIntSourceConfig + ( + int Vect, /* interrupt source vector number */ + int Polarity, /* interrupt source polarity */ + int Sense, /* interrupt source Sense */ + int Prio /* interrupt source priority */ + ) + + { + ULONG tmp, newVal; + ULONG actBit, srAddr; + + srAddr = SrcVecTable[Vect].srcAddr; + tmp = sysEUMBBARRead(srAddr); + actBit = (tmp & 40000000) >> 30; /* retrieve activity bit - bit 30 */ + if (actBit == 1) + return ERROR; + + tmp &= 0xff30ff00; /* Erase previously set P,S,Prio,Vector bits */ + newVal = (Polarity << 23) | (Sense << 22) | (Prio << 16) | Vect; + sysEUMBBARWrite(srAddr, tmp | newVal ); + return (OK); + } + +/**************************************************************************** + * epicIntAck - acknowledge an interrupt + * + * This function reads the Interrupt acknowldge register and return + * the vector number of the highest pending interrupt. + * + * RETURNS: Interrupt Vector number. + */ + +unsigned int epicIntAck(void) +{ + return(sysEUMBBARRead( EPIC_PROC_INT_ACK_REG )); +} + +/**************************************************************************** + * epicEOI - signal an end of interrupt + * + * This function writes 0x0 to the EOI register to signal end of interrupt. + * It is usually called after an interrupt routine is served. + * + * RETURNS: None + */ + +void epicEOI(void) + { + sysEUMBBARWrite(EPIC_PROC_EOI_REG, 0x0); + } + +/**************************************************************************** + * epicCurTaskPrioSet - sets the priority of the Processor Current Task + * + * This function should be called after epicInit() to lower the priority + * of the processor current task. + * + * RETURNS: OK or ERROR + */ + +int epicCurTaskPrioSet + ( + int prioNum /* New priority value */ + ) + { + + if ( (prioNum < 0) || (prioNum > 0xF)) + return ERROR; + sysEUMBBARWrite(EPIC_PROC_CTASK_PRI_REG, prioNum); + return OK; + } + + +/************************************************************************ + * function: epicIntTaskGet + * + * description: Get value of processor current interrupt task priority register + * + * note: + ***********************************************************************/ +unsigned char epicIntTaskGet() +{ + /* get the interrupt task priority register */ + ULONG reg; + unsigned char rec; + + reg = sysEUMBBARRead( EPIC_PROC_CTASK_PRI_REG ); + rec = ( reg & 0x0F ); + return rec; +} + + +/************************************************************** + * function: epicISR + * + * description: EPIC service routine called by the core exception + * at 0x500 + * + * note: + **************************************************************/ +unsigned int epicISR(void) +{ + return 0; +} + + +/************************************************************ + * function: epicModeGet + * + * description: query EPIC mode, return 0 if pass through mode + * return 1 if mixed mode + * + * note: + *************************************************************/ +unsigned int epicModeGet(void) +{ + ULONG val; + + val = sysEUMBBARRead( EPIC_GLOBAL_REG ); + return (( val & 0x20000000 ) >> 29); +} + + +/********************************************* + * function: epicConfigGet + * + * description: Get the EPIC interrupt Configuration + * return 0 if not error, otherwise return 1 + * + * note: + ********************************************/ +void epicConfigGet( unsigned int *clkRatio, unsigned int *serEnable) +{ + ULONG val; + + val = sysEUMBBARRead( EPIC_INT_CONF_REG ); + *clkRatio = ( val & 0x70000000 ) >> 28; + *serEnable = ( val & 0x8000000 ) >> 27; +} + + +/******************************************************************* + * sysEUMBBARRead - Read a 32-bit EUMBBAR register + * + * This routine reads the content of a register in the Embedded + * Utilities Memory Block, and swaps to big endian before returning + * the value. + * + * RETURNS: The content of the specified EUMBBAR register. + */ + +ULONG sysEUMBBARRead + ( + ULONG regNum + ) + { + ULONG temp; + + temp = *(ULONG *) (CONFIG_SYS_EUMB_ADDR + regNum); + return ( LONGSWAP(temp)); + } + +/******************************************************************* + * sysEUMBBARWrite - Write a 32-bit EUMBBAR register + * + * This routine swaps the value to little endian then writes it to + * a register in the Embedded Utilities Memory Block address space. + * + * RETURNS: N/A + */ + +void sysEUMBBARWrite + ( + ULONG regNum, /* EUMBBAR register address */ + ULONG regVal /* Value to be written */ + ) + { + + *(ULONG *) (CONFIG_SYS_EUMB_ADDR + regNum) = LONGSWAP(regVal); + return ; + } + + +/******************************************************** + * function: epicVendorId + * + * description: return the EPIC Vendor Identification + * register: + * + * siliccon version, device id, and vendor id + * + * note: + ********************************************************/ +void epicVendorId + ( + unsigned int *step, + unsigned int *devId, + unsigned int *venId + ) + { + ULONG val; + val = sysEUMBBARRead( EPIC_VENDOR_ID_REG ); + *step = ( val & 0x00FF0000 ) >> 16; + *devId = ( val & 0x0000FF00 ) >> 8; + *venId = ( val & 0x000000FF ); + } + +/************************************************** + * function: epicFeatures + * + * description: return the number of IRQ supported, + * number of CPU, and the version of the + * OpenEPIC + * + * note: + *************************************************/ +void epicFeatures + ( + unsigned int *noIRQs, + unsigned int *noCPUs, + unsigned int *verId + ) + { + ULONG val; + + val = sysEUMBBARRead( EPIC_FEATURES_REG ); + *noIRQs = ( val & 0x07FF0000 ) >> 16; + *noCPUs = ( val & 0x00001F00 ) >> 8; + *verId = ( val & 0x000000FF ); +} + + +/********************************************************* + * function: epciTmFrequncySet + * + * description: Set the timer frequency reporting register + ********************************************************/ +void epicTmFrequencySet( unsigned int frq ) +{ + sysEUMBBARWrite(EPIC_TM_FREQ_REG, frq); +} + +/******************************************************* + * function: epicTmFrequncyGet + * + * description: Get the current value of the Timer Frequency + * Reporting register + * + ******************************************************/ +unsigned int epicTmFrequencyGet(void) +{ + return( sysEUMBBARRead(EPIC_TM_FREQ_REG)) ; +} + + +/**************************************************** + * function: epicTmBaseSet + * + * description: Set the #n global timer base count register + * return 0 if no error, otherwise return 1. + * + * note: + ****************************************************/ +unsigned int epicTmBaseSet + ( + ULONG srcAddr, /* Address of the Timer Base register */ + unsigned int cnt, /* Base count */ + unsigned int inhibit /* 1 - count inhibit */ + ) +{ + + unsigned int val = 0x80000000; + /* First inhibit counting the timer */ + sysEUMBBARWrite(srcAddr, val) ; + + /* set the new value */ + val = (cnt & 0x7fffffff) | ((inhibit & 0x1) << 31); + sysEUMBBARWrite(srcAddr, val) ; + return 0; +} + +/*********************************************************************** + * function: epicTmBaseGet + * + * description: Get the current value of the global timer base count register + * return 0 if no error, otherwise return 1. + * + * note: + ***********************************************************************/ +unsigned int epicTmBaseGet( ULONG srcAddr, unsigned int *val ) +{ + *val = sysEUMBBARRead( srcAddr ); + *val = *val & 0x7fffffff; + return 0; +} + +/*********************************************************** + * function: epicTmCountGet + * + * description: Get the value of a given global timer + * current count register + * return 0 if no error, otherwise return 1 + * note: + **********************************************************/ +unsigned int epicTmCountGet( ULONG srcAddr, unsigned int *val ) +{ + *val = sysEUMBBARRead( srcAddr ); + *val = *val & 0x7fffffff; + return 0; +} + + +/*********************************************************** + * function: epicTmInhibit + * + * description: Stop counting of a given global timer + * return 0 if no error, otherwise return 1 + * + * note: + ***********************************************************/ +unsigned int epicTmInhibit( unsigned int srcAddr ) +{ + ULONG val; + + val = sysEUMBBARRead( srcAddr ); + val |= 0x80000000; + sysEUMBBARWrite( srcAddr, val ); + return 0; +} + +/****************************************************************** + * function: epicTmEnable + * + * description: Enable counting of a given global timer + * return 0 if no error, otherwise return 1 + * + * note: + *****************************************************************/ +unsigned int epicTmEnable( ULONG srcAddr ) +{ + ULONG val; + + val = sysEUMBBARRead( srcAddr ); + val &= 0x7fffffff; + sysEUMBBARWrite( srcAddr, val ); + return 0; +} + +void epicSourcePrint(int Vect) + { + ULONG srcVal; + + srcVal = sysEUMBBARRead(SrcVecTable[Vect].srcAddr); + PRINT("%s\n", SrcVecTable[Vect].srcName); + PRINT("Address = 0x%lx\n", SrcVecTable[Vect].srcAddr); + PRINT("Vector = %ld\n", (srcVal & 0x000000FF) ); + PRINT("Mask = %ld\n", srcVal >> 31); + PRINT("Activitiy = %ld\n", (srcVal & 40000000) >> 30); + PRINT("Polarity = %ld\n", (srcVal & 0x00800000) >> 23); + PRINT("Sense = %ld\n", (srcVal & 0x00400000) >> 22); + PRINT("Priority = %ld\n", (srcVal & 0x000F0000) >> 16); + } diff --git a/arch/ppc/cpu/mpc824x/drivers/epic/epic2.S b/arch/ppc/cpu/mpc824x/drivers/epic/epic2.S new file mode 100644 index 0000000000..52d19aae8e --- /dev/null +++ b/arch/ppc/cpu/mpc824x/drivers/epic/epic2.S @@ -0,0 +1,196 @@ +/************************************** + * + * copyright @ Motorola, 1999 + * + **************************************/ + +#include <ppc_asm.tmpl> +#include <ppc_defs.h> +#include <asm/processor.h> + +/********************************************* + * function: CoreExtIntEnable + * + * description: Enable 603e core external interrupt + * + * note: mtmsr is context-synchronization + **********************************************/ + .text + .align 2 + .global CoreExtIntEnable +CoreExtIntEnable: + mfmsr r3 + + ori r3,r3,0x8000 /* enable external interrupt */ + mtmsr r3 + + bclr 20, 0 + +/******************************************* + * function: CoreExtIntDisable + * + * description: Disable 603e core external interrupt + * + * note: + *******************************************/ + .text + .align 2 + .global CoreExtIntDisable +CoreExtIntDisable: + mfmsr r4 + + xor r3,r3,r3 + or r3,r3,r4 + + andis. r4,r4,0xffff + andi. r3,r3,0x7fff /* disable external interrupt */ + + or r3,r3,r4 + mtmsr r3 + + bclr 20, 0 + +/********************************************************* + * function: epicEOI + * + * description: signal the EOI and restore machine status + * Input: r3 - value of eumbbar + * Output: r3 - value of eumbbar + * r4 - ISR vector value + * note: + ********************************************************/ + .text + .align 2 + .global epicEOI +epicEOI: + lis r5,0x0006 /* Build End Of Interrupt Register offset */ + ori r5,r5,0x00b0 + xor r7,r7,r7 /* Clear r7 */ + stwbrx r7,r5,r3 /* Save r7, writing to this register will + * intidate the end of processing the + * highest interrupt. + */ + sync + + /* ---RESTORE MACHINE STATE */ + mfmsr r13 /* Clear Recoverable Interrupt bit in MSR */ + or r7,r7,r13 + + andis. r7,r7,0xffff + andi. r13,r13,0x7ffd /* (and disable interrupts) */ + or r13,r13,r7 + mtmsr r13 + + lwz r13,0x1c(r1) /* pull ctr */ + mtctr r13 + + lwz r13,0x18(r1) /* pull xer */ + mtctr r13 + + lwz r13,0x14(r1) /* pull lr */ + mtctr r13 + + lwz r13,0x10(r1) /* Pull SRR1 from stack */ + mtspr SRR1,r13 /* Restore SRR1 */ + + lwz r13,0xc(r1) /* Pull SRR0 from stack */ + mtspr SRR0,r13 /* Restore SRR0 */ + + lwz r13,0x8(r1) /* Pull User stack pointer from stack */ + mtspr SPRG1,r13 /* Restore SPRG1 */ + + lwz r4,0x4(r1) /* vector value */ + lwz r3,0x0(r1) /* eumbbar */ + sync + + addi r1,r1,0x20 /* Deallocate stack */ + mtspr SPRG0,r1 /* Save updated Supervisor stack pointer */ + mfspr r1,SPRG1 /* Restore User stack pointer */ + + bclr 20,0 + +/*********************************************************** + * function: exception routine called by exception vector + * at 0x500, external interrupt + * + * description: Kahlua EPIC controller + * + * input: r3 - content of eumbbar + * output: r3 - ISR return value + * r4 - Interrupt vector number + * note: + ***********************************************************/ + + .text + .align 2 + .global epic_exception + +epic_exception: + + /*---SAVE MACHINE STATE TO A STACK */ + mtspr SPRG1,r1 /* Save User stack pointer to SPRG1 */ + mfspr r1,SPRG0 /* Load Supervisor stack pointer into r1 */ + + stwu r3,-0x20(r1) /* Push the value of eumbbar onto stack */ + + mfspr r3,SPRG1 /* Push User stack pointer onto stack */ + stw r3,0x8(r1) + mfspr r3,SRR0 /* Push SRR0 onto stack */ + stw r1,0xc(r1) + mfspr r3,SRR1 /* Push SRR1 onto stack */ + stw r3,0x10(r1) + mflr r3 + stw r3,0x14(r1) /* Push LR */ + mfxer r3 + stw r3,0x18(r1) /* Push Xer */ + mfctr r3 + stw r3,0x1c(r1) /* Push CTR */ + + mtspr SPRG0,r1 /* Save updated Supervisor stack pointer + * value to SPRG0 + */ + mfmsr r3 + ori r3,r3,0x0002 /* Set Recoverable Interrupt bit in MSR */ + mtmsr r3 + + /* ---READ IN THE EUMBAR REGISTER */ + lwz r6,0(r1) /* this is eumbbar */ + sync + + /* ---READ EPIC REGISTER: PROCESSOR INTERRUPT ACKNOWLEDGE REGISTER */ + lis r5,0x0006 /* Build Interrupt Acknowledge Register + * offset + */ + ori r5,r5,0x00a0 + lwbrx r7,r5,r6 /* Load interrupt vector into r7 */ + sync + + /* --MASK OFF ALL BITS EXCEPT THE VECTOR */ + xor r3,r3,r3 + xor r4,r4,r4 + or r3, r3, r6 /* eumbbar in r3 */ + andi. r4,r7,0x00ff /* Mask off bits, vector in r4 */ + + stw r4,0x04(r1) /* save the vector value */ + + lis r5,epicISR@ha + ori r5,r5,epicISR@l + mtlr r5 + blrl + + xor r30,r30,r30 + or r30,r30,r3 /* save the r3 which containts the return value from epicISR */ + + /* ---READ IN THE EUMBAR REGISTER */ + lwz r3,0(r1) + sync + + lis r5,epicEOI@ha + ori r5,r5,epicEOI@l + mtlr r5 + blrl + + xor r3,r3,r3 + or r3,r3,r30 /* restore the ISR return value */ + + bclr 20,0 diff --git a/arch/ppc/cpu/mpc824x/drivers/epic/epicutil.S b/arch/ppc/cpu/mpc824x/drivers/epic/epicutil.S new file mode 100644 index 0000000000..4877050ba4 --- /dev/null +++ b/arch/ppc/cpu/mpc824x/drivers/epic/epicutil.S @@ -0,0 +1,57 @@ +/************************************** + * + * copyright @ Motorola, 1999 + * + * + * This file contains two commonly used + * lower level utility routines. + * + * The utility routines are also in other + * Kahlua device driver libraries. The + * need to be linked in only once. + **************************************/ + +#include <ppc_asm.tmpl> +#include <ppc_defs.h> + +/********************************************************** + * function: load_runtime_reg + * + * input: r3 - value of eumbbar + * r4 - register offset in embedded utility space + * + * output: r3 - register content + **********************************************************/ + .text + .align 2 + .global load_runtime_reg + +load_runtime_reg: + + xor r5,r5,r5 + or r5,r5,r3 /* save eumbbar */ + + lwbrx r3,r4,r5 + sync + + bclr 20, 0 + +/**************************************************************** + * function: store_runtime_reg + * + * input: r3 - value of eumbbar + * r4 - register offset in embedded utility space + * r5 - new value to be stored + * + ****************************************************************/ + .text + .align 2 + .global store_runtime_reg +store_runtime_reg: + + xor r0,r0,r0 + + stwbrx r5, r4, r3 + sync + + bclr 20,0 |