diff options
Diffstat (limited to 'arch/ppc/cpu/ppc4xx/fdt.c')
| -rw-r--r-- | arch/ppc/cpu/ppc4xx/fdt.c | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/arch/ppc/cpu/ppc4xx/fdt.c b/arch/ppc/cpu/ppc4xx/fdt.c new file mode 100644 index 0000000000..15a184b5c6 --- /dev/null +++ b/arch/ppc/cpu/ppc4xx/fdt.c @@ -0,0 +1,177 @@ +/* + * (C) Copyright 2007-2008 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <watchdog.h> +#include <command.h> +#include <asm/cache.h> +#include <ppc4xx.h> + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#include <libfdt.h> +#include <libfdt_env.h> +#include <fdt_support.h> +#include <asm/4xx_pcie.h> + +DECLARE_GLOBAL_DATA_PTR; + +void __ft_board_setup(void *blob, bd_t *bd) +{ + int rc; + int i; + u32 bxcr; + u32 ranges[EBC_NUM_BANKS * 4]; + u32 *p = ranges; + char ebc_path[] = "/plb/opb/ebc"; + + ft_cpu_setup(blob, bd); + + /* + * Read 4xx EBC bus bridge registers to get mappings of the + * peripheral banks into the OPB/PLB address space + */ + for (i = 0; i < EBC_NUM_BANKS; i++) { + mtdcr(EBC0_CFGADDR, EBC_BXCR(i)); + bxcr = mfdcr(EBC0_CFGDATA); + + if ((bxcr & EBC_BXCR_BU_MASK) != EBC_BXCR_BU_NONE) { + *p++ = i; + *p++ = 0; + *p++ = bxcr & EBC_BXCR_BAS_MASK; + *p++ = EBC_BXCR_BANK_SIZE(bxcr); + +#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE + /* Try to update reg property in nor flash node too */ + fdt_fixup_nor_flash_size(blob, i, + EBC_BXCR_BANK_SIZE(bxcr)); +#endif + } + } + + /* Some 405 PPC's have EBC as direct PLB child in the dts */ + if (fdt_path_offset(blob, ebc_path) < 0) + strcpy(ebc_path, "/plb/ebc"); + rc = fdt_find_and_setprop(blob, ebc_path, "ranges", ranges, + (p - ranges) * sizeof(u32), 1); + if (rc) { + printf("Unable to update property EBC mappings, err=%s\n", + fdt_strerror(rc)); + } +} +void ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup"))); + +/* + * Fixup all PCIe nodes by setting the device_type property + * to "pci-endpoint" instead is "pci" for endpoint ports. + * This property will get checked later by the Linux driver + * to properly configure the PCIe port in Linux (again). + */ +void fdt_pcie_setup(void *blob) +{ + const char *compat = "ibm,plb-pciex"; + const char *prop = "device_type"; + const char *prop_val = "pci-endpoint"; + const u32 *port; + int no; + int rc; + + /* Search first PCIe node */ + no = fdt_node_offset_by_compatible(blob, -1, compat); + while (no != -FDT_ERR_NOTFOUND) { + port = fdt_getprop(blob, no, "port", NULL); + if (port == NULL) { + printf("WARNING: could not find port property\n"); + } else { + if (is_end_point(*port)) { + rc = fdt_setprop(blob, no, prop, prop_val, + strlen(prop_val) + 1); + if (rc < 0) + printf("WARNING: could not set %s for %s: %s.\n", + prop, compat, fdt_strerror(rc)); + } + } + + /* Jump to next PCIe node */ + no = fdt_node_offset_by_compatible(blob, no, compat); + } +} + +void ft_cpu_setup(void *blob, bd_t *bd) +{ + sys_info_t sys_info; + int off, ndepth = 0; + + get_sys_info(&sys_info); + + do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "timebase-frequency", + bd->bi_intfreq, 1); + do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "clock-frequency", + bd->bi_intfreq, 1); + do_fixup_by_path_u32(blob, "/plb", "clock-frequency", sys_info.freqPLB, 1); + do_fixup_by_path_u32(blob, "/plb/opb", "clock-frequency", sys_info.freqOPB, 1); + + if (fdt_path_offset(blob, "/plb/opb/ebc") >= 0) + do_fixup_by_path_u32(blob, "/plb/opb/ebc", "clock-frequency", + sys_info.freqEBC, 1); + else + do_fixup_by_path_u32(blob, "/plb/ebc", "clock-frequency", + sys_info.freqEBC, 1); + + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); + + /* + * Fixup all UART clocks for CPU internal UARTs + * (only these UARTs are definitely clocked by gd->uart_clk) + * + * These UARTs are direct childs of /plb/opb. This code + * does not touch any UARTs that are connected to the ebc. + */ + off = fdt_path_offset(blob, "/plb/opb"); + while ((off = fdt_next_node(blob, off, &ndepth)) >= 0) { + /* + * process all sub nodes and stop when we are back + * at the starting depth + */ + if (ndepth <= 0) + break; + + /* only update direct childs */ + if ((ndepth == 1) && + (fdt_node_check_compatible(blob, off, "ns16550") == 0)) + fdt_setprop(blob, off, + "clock-frequency", + (void*)&(gd->uart_clk), 4); + } + + /* + * Fixup all ethernet nodes + * Note: aliases in the dts are required for this + */ + fdt_fixup_ethernet(blob); + + /* + * Fixup all available PCIe nodes by setting the device_type property + */ + fdt_pcie_setup(blob); +} +#endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */ |